ANAREN C2023J5003A00

Model C2023J5003A00
Rev D
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C2023J503A00 is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. It is designed
for WiMax,WiBro, UMTS, and IMT2000 applications. The C2023J503A00 is ideal for
balanced power and low noise amplifiers, plus signal distribution and other
applications where low insertion loss and tight amplitude and phase balance are
required. The C2023J503A00 is available on tape and reel for pick and place high
volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability having X and
Y thermal coefficient of expansion (CTE) of 17 ppm/°C
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Frequency
Port Impedance
Return Loss
Isolation
Insertion Loss*
Amplitude Balance
Phase Balance (relative to 90°)
Power Handling
• 2000 – 2300 MHz
• 0.7mm Height Profile
• WiMax, WiBro, UMTS &
IMT2000 applications
• Low Insertion Loss
• High Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Min.
2000
Typ.
0.4
0.8
6
4
Unit
MHz
Ω
dB
dB
dB
dB
Degrees
Watts
+85
ºC
50
22
25
0.3
0.1
2
18
21
Operating Temperature
Max
2300
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
.079±.004
[2.00±0.10]
Side View
4X .026
[0.65]
.028±.002
[0.700±0.05]
.039
[0.98]
.049±.004
[1.25±0.10]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Bottom View (Far-side)
Orientation
Marker Denotes
Pin Location
Pin
1
2
3
4
5
6
Designation
Input
GND
Isolated
Direct
GND
Coupled
1
2
3
6X .009
[0.22]
6
5
6X .012
[0.30]
4
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C2023J5003A00
Rev D
Typical Broadband Performance: 500 MHz. to 6000 MHz.
Insertion Loss
-3
-0.300
-6
-0.600
-9
-0.900
-12
-1.200
-15
-1.500
5500
6000
5500
6000
6000
5000
4500
4000
5500
5
3500
6000
3000
-20
2500
-2
2000
-15
500
-1.5
5500
-10
5000
-1
4500
-5
4000
-0.5
1500
0
1000
0
3500
5000
0.5
3000
5000
10
2500
4500
1
2000
4500
15
deg
1.5
1500
4000
Phase Balance
20
1000
4000
Amplitude Balance
2
500
3500
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
Isolation
0
-3
-6
-9
-12
-15
[dB]
-18
-21
-24
-27
-30
-33
3500
3000
2500
2000
1500
1000
-36
500
[dB]
3000
2500
500
6000
5500
5000
4500
4000
3500
-3.600
3000
-3.300
-36
2500
-3.000
-33
2000
-2.700
-30
1500
-2.400
-27
1000
-2.100
-24
2000
-1.800
-21
1000
-18
1500
[dB]
0.000
500
[dB]
Return Loss - Input
0
Frequency [MHz]
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C2023J5003A00
Rev D
Typical Performance: 1900 MHz. to 2400 MHz.
Insertion Loss
Return Loss - Input
0.0
0
-0.3
-6
-0.6
-0.9
-1.2
-15
-1.5
Frequency [MHz]
Phase Balance
Amplitude Balance
20
15
1
10
0.5
5
-5
1900
2400
2300
2200
-20
2100
-15
-2
2000
-10
1900
-1
-1.5
Frequency [MHz]
2400
-0.5
2300
0
2200
0
2100
deg
1.5
2000
2
[dB]
2400
1900
Frequency [MHz]
2300
-3.6
2400
-3.3
-36
2300
-3.0
-33
2200
-2.7
-30
2100
-2.4
-27
2000
-2.1
-24
2200
-1.8
-21
2100
-18
2000
[dB]
-9
-12
1900
[dB]
-3
Frequency [MHz]
Isolation
0
-3
-6
-9
-12
-18
-21
-24
-27
-30
-33
2400
2300
2200
2100
2000
-36
1900
[dB]
-15
Frequency [MHz]
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C2023J5003A00
Rev D
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical
and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
6X .014
[0.35]
4X .012
[0.30]
6X .013
[0.33]
.026
[0.66]
6X .002
[0.05]
4X Transmission
Line
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
Dimensions are in Inches [Millimeters]
Mounting Footprint
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C2023J5003A00
Rev D
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
ØA
ØC
ØD
QUANTITY/REEL
4000
TABLE 1
REEL DIMENSIONS (inches [mm])
ØA
7.00 [177.8]
B
0.32 [8.0]
ØC
2.0 [50.8]
ØD
0.512 [13.0]
B
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C2023J5003A00
Rev D
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.