Model E150N50X4 ROHS Compliant Flangeless Mount Termination 150 Watts, 50Ω Description The E150N50X4 is high performance Aluminum Nitride (AlN) termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators, and for use in power combiners. The termination is also RoHS compliant! General Specifications Features: • RoHS Compliant • 150 Watts • DC – 2.7GHz • AlN Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested Resistive Element Substrate Finish Cover Thick Film AlN Ceramic Matte Tin over Nickel Alumina Ceramic Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 150 Watts DC – 2.7 GHz > 25 dB DC – 2.0 GHz > 20 dB DC – 2.7 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing E150N50X4 (097) rev.E pg. 1 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model E150N50X4 Typical Performance: Power De-rating: Mounting Footprint and Procedure: E150N50X4 (097) rev.E pg. 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392