VSKL300-08PbF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A FEATURES • Electrically isolated base plate • 3000 VRMS isolating voltage • Industrial standard package • Simplified mechanical designs, rapid assembly • High surge capability • Large creepage distances • UL approved file E78996 • Compliant to RoHS directive 2002/95/EC INT-A-PAK APPLICATIONS • Battery chargers PRODUCT SUMMARY • Welders IT(AV) 300 A • Power converters • Alternators MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS 800 V 53 °C 300 A 50 Hz 6500 60 Hz 6900 50 Hz 214 60 Hz 195 VDRM/VRRM IT(AV) ITSM I2t I2√t TJ Range A kA2s 2140 kA2√s - 40 to 140 °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VRRM/VDRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM/VDSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM/IDRM AT 125 °C mA VSKL300-08PbF 800 900 50 Document Number: 94557 Revision: 04-May-10 For technical questions, contact: [email protected] www.vishay.com 1 VSKL300-08PbF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A ON-STATE CONDUCTION PARAMETER SYMBOL Maximum average on-state current at case temperature Maximum RMS on-state current Maximum peak, one-cycle on-state, non-repetitive surge current IT(AV) IT(RMS) ITSM TEST CONDITIONS 180° conduction half sine wave 116 t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing I2√t °C 6600 t = 10 ms I 2t A 53 t = 10 ms t = 8.3 ms No voltage reapplied 100 % VRRM reapplied No voltage reapplied 6900 A 5500 Sine half wave, initial TJ = TJ maximum 5800 214 195 151 100 % VRRM reapplied kA2s 138 t = 0.1 ms to 10 ms, no voltage reapplied 2140 Low level value of threshold voltage VT(TO)1 (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ maximum 0.796 High level value of threshold voltage VT(TO)2 (I > π x IT(AV)), TJ maximum 0.868 Low level value on-state slope resistance rt1 (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ maximum 0.972 High level value on-state slope resistance rt2 (I > π x IT(AV)), TJ maximum 0.88 Maximum on-state voltage drop UNITS 300 As AC switch t = 8.3 ms Maximum I2t for fusing VALUES kA2√s V mΩ VTM VFM TJ = 25 °C, 500 A Ipk SCR 1.35 DIODE 1.20 V SWITCHING PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Typical delay time td Gate current 1 A, dIg/dt = 1 A/μs Vd = 0.67 % VDRM, TJ = 25 °C Typical turn-off time tq ITM = 300 A, TJ = TJ maximum, dI/dt = 20 A/μs, VR = 50 V dV/dt = 20 V/μs, Gate 0 V 100 Ω, tp = 500 μs 100 SYMBOL TEST CONDITIONS VALUES UNITS 1.0 μs BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage dV/dt TJ = TJ maximum linear to 67 % rated VDRM 500 V/μs Maximum peak reverse and off-state leakage current IDRM, IRRM TJ = TJ maximum, rated VDRM/VRRM applied 50 mA RMS insulation voltage VINS 50 Hz, circuit to base, all terminal shorted, t = 1 s 3000 V www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 94557 Revision: 04-May-10 VSKL300-08PbF INT-A-PAK Power Module Thyristor/Diode, 300 A Vishay High Power Products TRIGGERING PARAMETER SYMBOL Maximum peak gate power PGM Maximum average gate power PG(AV) Maximum peak positive gate current IGM Maximum required DC gate voltage to trigger VGT Maximum required DC gate current to trigger IGT Maximum holding current IH Maximum peak positive gate voltage +VGM Maximum peak negative gate voltage -VGM DC gate voltage not to trigger VGD DC gate current not to trigger IGD Maximum non-repetitive rate of rise of turned-on current dI/dt TEST CONDITIONS VALUES UNITS TJ = TJ maximum, tp ≤ 5 ms 10.0 TJ = TJ maximum, f = 50 Hz, d% = 50 2.0 TJ = TJ maximum, tp ≤ 5 ms 3.0 A 3 V TJ = 25 °C Anode supply: 12 V resistive load W 200 mA 600 20 TJ = TJ maximum, tp ≤ 5 ms V 5.0 TJ = TJ maximum Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied 0.30 V 10 mA 1000 A/μs VALUES UNITS Gate drive 20 V, 20 Ω, tr ≤ 1 μs TJ = TJ maximum, anode voltage ≤ 80 % VDRM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range TEST CONDITIONS TJ - 40 to 140 Maximum storage temperature range TStg - 40 to 150 Maximum thermal resistance, junction to case per junction RthJC DC operation 0.19 Maximum thermal resistance, case to heatsink per module RthCS Mounting surface smooth, flat and greased 0.035 A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. 4 to 6 Nm 500 g 17.8 oz. K/W IAP to heatsink Mounting torque ± 10 % °C busbar to IAP Approximate weight Case style INT-A-PAK ΔR CONDUCTION PER JUNCTION SINUSOIDAL CONDUCTION AT TJ MAXIMUM DEVICES VSKL300 RECTANGULAR CONDUCTION AT TJ MAXIMUM UNITS 180° 120° 90° 60° 30° 180° 120° 90° 60° 30° 0.019 0.022 0.028 0.041 0.068 0.013 0.023 0.031 0.043 0.069 K/W Note • Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94557 Revision: 04-May-10 For technical questions, contact: [email protected] www.vishay.com 3 VSKL300-08PbF Vishay High Power Products INT-A-PAK Power Module Conduction Angle 100 30° 60° 50 90° 120° 180° 0 0 Maximum Allowable Case Temperature (°C) Maximum Average On-state Power Loss (W) 150 500 DC 400 RMS Limit 300 Conduction Period 200 180° 120° 90° 60° 30° 100 0 0 100 200 300 400 500 Average On-state Current (A) Average On-state Current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - On-State Power Loss Characteristics 150 100 Conduction Angle 30° 60° 50 DC 90° 120° 180° 0 0 100 200 300 400 400 RMS Limit Conduction Angle 200 180° 120° 90° 60° 30° 100 0 0 50 5000 4500 4000 3500 3000 2500 1 100 150 200 250 300 350 10 100 Fig. 5 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave On-state Current (A) 500 Maximum Non-repetitive Surge Current Versus Pulse Train Duration Initial Tj = 140°C No Voltage Reapplied Rated Vrrm reapplied 5500 Number of Equal Amplitude Half Cycle Current Pulsed (N) Fig. 2 - Current Ratings Characteristics 300 6000 500 Average On-state Current (A) Maximum Average On-state Power Loss (W) 600 50 100 150 200 250 300 350 Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (°C) Thyristor/Diode, 300 A 6500 6000 5500 5000 Maximum Non-repetitive Surge Current Versus Pulse Train Duration Initial Tj = 140°C No Voltage Reapplied Rated Vrrm reapplied 4500 4000 3500 3000 2500 2000 0.01 0.1 1 10 Average On-state Current (A) Pulse Train Durations (s) Fig. 3 - On-State Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94557 Revision: 04-May-10 VSKL300-08PbF INT-A-PAK Power Module Thyristor/Diode, 300 A 10000 Instantaneous On-state Current (A) Instantaneous On-state Current (A) 10000 Vishay High Power Products Tj = 140°C 1000 100 10 Tj = 25°C 1000 100 10 Tj = 140°C Tj = 25°C 1 1 0.5 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Instantaneous On-state Voltage (V) Fig. 7 - On-State Voltage Drop Characteristics (SCR) Transient Thermal Impedance Z thJC (K/W) 1.0 1.5 2.0 2.5 3.0 Instantaneous On-state Voltage (V) Fig. 8 - On-State Voltage Drop Characteristics (Diode) 1 0.1 0.01 0.001 0.0001 1E-04 Single Pulse (Thermal Resistance) 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 Square Wave Pulse Duration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code Document Number: 94557 Revision: 04-May-10 VSK L 300 1 2 3 - 08 PbF 4 5 1 - Module type 2 - Circuit configuration (L = SCR/diode doubler negative control) 3 - Current rating (300 = 300 A) 4 - Voltage rating (08 = 800 V) 5 - PbF = Lead (Pb)-free For technical questions, contact: [email protected] www.vishay.com 5 VSKL300-08PbF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A CIRCUIT CONFIGURATION 1 ~ 2 + ~ + 3 K2 G2 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 6 www.vishay.com/doc?95010 For technical questions, contact: [email protected] Document Number: 94557 Revision: 04-May-10 Outline Dimensions Vishay Semiconductors INT-A-PAK Diode DIMENSIONS in millimeters (inches) A 8 (0.32) A B C E D (See table) 94 (3.70) 80 (3.15) 7 (0.27) 3 screws M6 x 1 1 3 34 (1.34) 2 1 2 Document Number: 95010 Revision: 29-Sep-08 2 holes Ø 6.5 A B C D E 23 (0.91) 30 (1.18) 36 (1.42) - - For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1