150 Watts LPS150 Series Total Power: 110-150 Watts Input Voltage: 85-132 / 170-264 VAC 220-300 VDC # of Outputs: Single Electrical Specs Input Input range 85-132 VAC or 170-264 VAC automatically selected. 220-300 VDC 47-63 Hz 38 A max, cold start @ 25°C 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Frequency Inrush current Efficiency EMI filter Safety ground leakage current Special Features • • • • • • • • • • • • Auto ranging input Remote sense Remote inhibit Power fail Single wire current sharing Built-in EMI filter Low output ripple Adjustable output 135 khz switching frequency Overvoltage protection Overload protection Optional cover (-C suffix). <0.5 mA @ 50/60 Hz, 264 VAC input Output Maximum power Adjustment range Hold-up time Overload protection Overvoltage protection Environmental 110 W convection (75 W with cover) 150 W with 30 CFM forced air (130 W with cover) ±5% minimum 20 ms @ 110 W load, 115/230 VAC nominal line Short circuit protection. Case overload protected @ 110% to 145% above peak rating 5 V output: 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal output Logic Control Operating temperature: 0° to 50°C ambient; derate each output at 2.5% per degree from 50° to 70°C Electromagnetic susceptibility: Designed to meet IEC 801, -2, -3, -4, -5,-6, Level 3 Humidity: Operating; non-condensing 5% to 95% Power Failure Remote inhibit Remote sense Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational TTL Logic signal goes high 50-150 msec after 5 V output. It goes low at least 3 ms before loss of regulation. Requires an external TTL high signal to inhibit outputs. Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protected. Safety Storage temperature: -40° to 85°C Temperature coefficient: ±.04% per °C MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions VDE UL CSA NEMKO BABT CB CE 112 America’s (USA): 1-888-41-ASTEC 0805/EN60950 (IEC950) UL1950 CSA 22.2-234 Level 3 EN 60950/EMKO-TUE (74-sec) 203 EN60950/BS7002 Certificate and report Mark (LVD) Europe (UK): 44 (1384) 842-211 11774-3336-1260 (LC#88585) EI32002 LR53982 P95102999 607019 2062 Asia (HK): 852-2437-9662 rev 12.01.01 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30 CFM Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 LPS152 LPS153 LPS155 5V 12-(15) V 24-(28) V 0A 0A 0A 22 A 9.1 A 4.5 A 30 A 12.5 A 6.2 A 35 A 14.5 A 7.2 A ±2% ±2% ±2% 50 mV 150 mV 280 mV, max. LPS150 Series Ordering Information 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line and load ranges. Note: -C suffix added to the model number indicates cover option. Pin Assignments Connector LPS152 LPS153 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE PIN 5 PIN 6 PIN 7 COMMON PIN REMOVED POK COMMON PIN REMOVED POK COMMON PIN REMOVED POK SK3 TB-1 TB-2 COMMON +5 V COMMON +12 to +15 V COMMON +24 to +28 V SK4 PIN 1 PIN 3 PIN 5 GROUND LINE NEUTRAL GROUND LINE NEUTRAL GROUND LINE NEUTRAL SK1 SK1 8765 LPS155 SK3 2 1 SK2 1234 #6-32 (8 places) .5625 765 Do Not Adjust Output Adjust SK2 7.4 (188.0) 8.5 (216.0) Mating Connectors (SK4) AC Input: Molex 09-50-8051 (USA) Molex 09-91-0500 (UK) PINS: 08-58-0111 (SK2) Power fail: Molex 09-50-8031 (USA) Molex 09-91-0300 (UK) PINS: 08-58-0111 531 (SK1) Remote sense/Remote inhibit: Molex 51110-0851 (USA) Pins: 50394-8100 4.25 (108.0) SK4 .75 (19.0) 1.5 (38.1) Astec Connector Kit #70-841-009, includes al of the above. Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±.02”. 3. Specifications are for convection rating at factory settings unless otherwise stated. 4. Remote inhibit requires an external 5V @ 10mA to activate. 5. Mounting (6-32) maximum insertion depth is 0.12”. 6. Warranty: 1 year 7. Weight: 1.75 lb. / 0.80 kg www.astec.com .875 (22.25) 2.5 (63.5) 113