ADSL Magnetics TM02303 • Used in conjunction with the S560-6600-EB transformer in ADI’s ADSL over POTS Eagle design • Designed to comply with the requirements of UL1950 and EN60950 to provide a supplementary insulation barrier with a working voltage of 250V • UL File Number E169987 BABT certificate NC / 011557 • Minimum interwinding breakdown voltage of 1500 Vrms • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±7% Leakage Inductance µH max Chip : Line Line Side Line Side Chip Side 1.41 : 1 400 10 2.2 Part Number S560-6600-EP DCR Ω ±10% Longitudinal Balance2 dB min Insertion Loss2 dB max Frequency Response2 dB max Harmonic Distortion2 dB max Line Side 10 kHz 1.1 MHz 300 kHz 100 kHz 1.1 MHz 4 Vac 40 kHz 2.0 46 0.5 ±0.5 -80 All measurements are made with pins 2 and 3 connected and pins 5 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured with line impedance of 100 Ω SCHEMATIC S560-6600-EP 1 8 3 5 2 7 4 6 Line IC ©2002 Bel Fuse Inc. Specifications subject to change without notice. 04.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics TM02303 MECHANICAL 0.061 [1.55] 4 1 S560-6600-EP 0.324 [8.23] 8 5 0.098 [2.50] 0.048 [1.22] Suggested PCB Pad Layout 0.385 [9.78] max 0.339 [8.61] max 0.450 [11.43] max 0.098 [2.50] 0.024 [0.61] 0.227 [5.77] 0.299 [7.59] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2002 Bel Fuse Inc. Specifications subject to change without notice. 04.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2