CEL UPC8163TB

3 V SILICON RFIC
FREQUENCY UPCONVERTER
FEATURES
UPC8163TB
BLOCK DIAGRAM
• RECOMMENDED OPERATING FREQUENCY:
fRFOUT = 0.8 GHz to 2.0 GHz
fIFIN = 50 MHz to 300 MHz
(Top View)
• SUPPLY VOLTAGE:
VCC = 2.7 to 3.3 V
LO input
3
4
GND
GND
2
5
VCC
IF input
1
6 RF output
• HIGH DENSITY SURFACE MOUNTING:
6-pin super minimold package
• HIGH IP3:
OIP3 = +9.5 dBm @ fRFOUT = 900 MHz
• MINIMIZED CARRIER LEAKAGE:
Due to double balanced mixer
DESCRIPTION
APPLICATIONS
NEC's UPC8163TB is a silicon RFIC designed as a frequency
upconverter for cellular/cordless telephone transmitter stages,
and features improved intermodulation. This device is housed
in a 6 pin super mini mold or SOT-363 package making it ideal
for reducing system size. The UPC8106TB is manufactured
using NEC's 20 GHz fT NESATTM III silicon bipolar process.
• Digital Cellular/Cordless Phones
NEC's stringent quality assurance and test procedures ensure
the highest reliability and performance.
ELECTRICAL CHARACTERISTICS
(TA = 25°C, VCC = VRFOUT = 3.0 V, fIFIN = 240 MHz, PLOIN = -5 dBm unless otherwise specified)
PART NUMBER
PACKAGE OUTLINE
SYMBOLS
PARAMETERS AND CONDITIONS
ICC
Circuit Current (no signal)
CG
Conversion Gain
fRFOUT = 0.9 GHz, PIFIN = -30 dBm
fRFOUT = 1.9 GHz, PIFIN = -30 dBm
PSAT
Saturated Output Power
fRFOUT = 0.9 GHz
fRFOUT = 1.9 GHz
OIP3
Output third Order Intercept Point,
fIFIN1 = 240 MHz
fIFIN2 = 240.4 MHz
PIFIN = -20 dBm
NF
SSB Noise Figure
fRFOUT = 0.9 GHz
fRFOUT = 1.9 GHz
fRFOUT = 0.9 GHz
fRFOUT = 1.9 GHz
UPC8163TB
S06
UNITS
MIN
TYP
MAX
mA
11.5
16.5
23
dB
dB
6
4
9
7
12
10
dBm
dBm
-1.5
-4.5
0.5
-2
dBm
dBm
+9.5
+6.0
dB
dB
12.5
12.5
California Eastern Laboratories
UPC8163TB
RECOMMENDED
OPERATING CONDITIONS
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
SYMBOLS
PARAMETERS
Supply Voltage2
VCC
Total Power
PT
PIN
Dissipation3
Input Power
UNITS
RATINGS
V
3.6
SYMBOLS
200
VCC
mW
dBm
PLOIN
+10
TOP
Operating Temperature
°C
-40 to +85
TSTG
Storage Temperature
°C
-55 to +150
fRFOUT
Notes:
1. Operation in excess of any one of these conditions may result in
permanent damage.
2. TA = 25˚C, pins 5 and 6.
3. Mounted on a double-sided copperclad 50x50x1.6 mm epoxy
glass PWB, TA = 85˚C).
PARAMETERS
UNITS MIN
Supply Voltage1
Local Input Level2
RF Output
Frequency3
fIFIN
IF Input Frequency
TOP
Operating Temperature
TYP MAX
V
2.7
3.0
3.3
dBm
-10
-5
0
GHz
0.8
–
2.0
MHz
50
–
300
˚C
-40
+25
+85
Notes:
1. Same voltage applied to pins 5 and 6
2. ZS = 50 Ω (without matching)
3. With external matching circuit
PIN FUNCTIONS
Pin
No.
Pin
Name
Applied
Voltage
Pin
Voltage
1
IFINPUT
—
1.2
This pin is the IF input to double balanced mixer.
The input is a high impedance.
2
4
GND
0
—
GND pin. Ground pattern on the board should be
as wide as possible. Trace length should be kept
as short as possible to minimize ground
impedance.
3
5
6
LOINPUT
VCC
—
2.7 to 3.3
RFOUTPUT Same
bias as
VCC
through
external
inductor
2.1
Description
Equivalent Circuit
5
6
3
LO input pin. Recommended input level is -10 to
0 dBm.
—
Supply voltage pin.
—
This pin is the RF output. This pin is designed as
an open collector. Due to the high impedance
output, this pin requires an external LC matching
circuit.
1
2
APPLICATION EXAMPLE
DEMO
RX
VCO
÷N
I
Q
PLL
SW
PLL
I
0˚
Phase
Shifter
90˚
TX
PA
UPC8163TB
Q
UPC8163TB
OUTLINE DIMENSIONS (Units in mm)
LEAD CONNECTIONS
(Top View)
PACKAGE OUTLINE S06
(Bottom View)
C2Y
2.1±0.1
3
1.25±0.1
2.0±0.2
0.65 3
4
0.65 2
5
0.2 +0.1
-0
2
1.3
1
1
4
4
3
5
5
2
6
6
1
6
DOT ON
BACK SIDE
0.9 ± 0.1
1.
2.
3.
4.
5.
6.
0.7
+0.1
0.15 -0.5
0 ~0.1
Note:
All dimensions are typical unless otherwise specified.
IF INPUT
GND
LO INPUT
GND
VCC
RF OUTPUT
ORDERING INFORMATION
PART NUMBER
QUANTITY
UPC8163TB-E3-A
3K/Reel
Note: Embossed tape 8 mm wide. Pins 1,2,3 face tape perforation
side.
TEST CIRCUIT 2 (RFOUT = 1.9 GHz)
TEST CIRCUIT 1 (RFOUT = 900 MHz)
(Top View)
(Top View)
100 pF
100 pF
3 LOin
GND
4
2 GND
VCC
5
10 nH
1000 pF
1.0 pF
100 pF
1 IFin
3 LOin
GND
4
2 GND
VCC
5
0.1 µF
1000 pF
1 IFin
RFout 6
100 nH
TL = 5 nH
100 pF
1000 pF
0.1 µF
1000 pF
RFout 6
2.7 pF
900 MHz
Match
1.9 GHz
Match
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
02/14/2000
DATA SUBJECT TO CHANGE WITHOUT NOTICE
5-142
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
5-143
5-144