Cree® SMD LED Model # LM3-EWN1-01-N2 Data Sheet 120-degree, 2.7 x 2.0 mm, SMT LED in white color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 25 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 450 °C/W RTHJS 300 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT165.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Forward Voltage VF IF = 20 mA V Reverse Current IR VR = 5 V Luminous Flux V Minimum Typical Maximum 3.4 4.0 A IF = 20 mA mlm mcd 10 4000 Luminous Intensity IV IF = 20 mA Chromaticity Coordinates x IF = 20 mA 0.30 y IF = 20 mA 0.29 50% Power Angle 2 ½ IF = 20 mA deg Subject to change without notice. www.cree.com/ledlamps 1120 1500 120 Standard Bins for LM3-EWN1-01-N1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LM3-EWN1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) k1 k2 k3 k4 k5 k6 X2 or above 2240 mcd X1 1800 mcd W2 1400 mcd W1 1120 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y k1 k3 0.264 0.280 0.291 0.275 0.275 0.291 0.300 0.287 0.287 0.300 0.3065 0.297 0.267 0.248 0.257 0.281 0.281 0.257 0.267 0.295 0.295 0.267 0.275 0.305 0.297 0.3065 0.313 0.307 0.307 0.313 0.322 0.319 0.319 0.322 0.330 0.330 0.305 0.275 0.283 0.315 0.315 0.283 0.295 0.328 0.328 0.295 0.307 0.339 Rank Chromaticity x Coordinates y k2 k4 k5 k6 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the color coordinates is ±0.01. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging” document. 6. Please refer to the “Cree LED Lamp Reliability Test Parameters” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT165.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Rev. No. 03 CIE Chromaticity Diagram CIE CIE Chromaticity Diagram 0.90 520 530 0.80 540 510 55 0.70 560 0.60 570 490 0.50 Y 580 590 0.40 600 ˾ˇ 0.30 ˴˾˅ 480 ˾ˈ ˾ˉ 610 620 630 ˾ˆ ˾˄ 0.20 470 0.10 460 0.00 0.00 0.10 0.20 4/5 0.30 X 0.40 0.50 0.60 CLD-CT165.000 0.80 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 0.70 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps REV.4 Document No. SPE/LM3-EWN1-01-N1 Rev. No. 03 Graphs Graphs 100.0 -40 -50 If (mA) -30 -10 -20 0 0.0 Vr(V) -10.0 80.0 -20.0 60.0 -30.0 40.0 -40.0 20.0 -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Vf(V) 0.0 3.0 3.4 3.8 4.2 5.0 4.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Half Power WL=150nm 5.0 4.0 100% 3.0 75% 2.0 50% 1.0 25% If(mA) 0.0 0.0 20.0 40.0 60.0 0% 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 50 400 500 600 700 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. IF(mA) 50% Power Angle : 40 Ie(%) 0 Rth j-s=300 C/W 100% 30 80% 20 60% 10 0 40% Rth j-a=450 C/W 0 20 40 60 20% T ( C) 80 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items -60 -30 0 30 90 0% FIG.6 FAR FIELD PATTERN Signatures Date Prepared by WangFJ 2007-05-08 Rev.No Checked by XieJH 2007-05-08 02 Approved by DavidLiu 2007-05-08 03 2007-04-10 Release. Change CIE from 1/4bin(a21-b24) to 1/2bin(k1-k6), 04 2007-05-08 Change dimension drawing FCN# FCN20070120 Revision History Date Change Description 2007-03-05 Add ĭV (typ) 4000 mlm and important notes: 8) and Change Chromaticity Coordinates (X,Y) and CIE Diagram typ(x)0.31 to 0.30,(y)0.32 to 0.29 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Cree logo are registered trademarks of Cree, Inc. 60 Copyright@2002 Cotco International Ltd. CLD-CT165.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM3-EWN1-01-N1 Rev. No. 03 Mechanical Dimensions Dimension Drawing All dimensions are in mm. ations ngs at Ta = 25°C mbol Absolute maximum Rating Unit IF 25 mA IFP 100 mA VR 5 V PD 100 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 450 °C/W Rth JS 300 °C/W 2 y <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) cal Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 20mA --- 3.4 4.0 V VR = 5V --- --- 10 PA IR ӥ˩ IV Notes RoHS Compliance The levels environmentally biologically persistent organic pollutants (POP), or IF = of 20mA --- sensitive, persistent 4000 --- toxic (PBT),mlm otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecIF = 20mA on the restriction mcd in electrical and electronic equipment tive 2002/95/EC of the 1500 use of certain hazardous substances 1120 --(RoHS), as amended through April 21, 2006. x IF = 20mA --- 0.30 --- --- Vision Advisory Claim y IF = 20mA --- product. The--Users should be cautioned --not to stare at0.29 the light of this LED bright light can damage the eye. IF = 20mA 2 T½ --- 120 --- deg Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT165.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LM3-EWN1-01-N1-00001 SMD 120 White, FULL RANK, Tape & Reel LM3-EWN1-01-N1-00002 SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT165.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps