InGaAs-PIN/Preamp Receiver FRM3Z232HY FEATURES • Data rate up to 2.7Gb/s • Sensitivity: -25dBm (typ.) • Small co-axial package with single-mode fiber • Differential Electrical Output • Preamplifier Power Supply Voltage: +3.3V • Wide operating temperature range: -40 to +85°C APPLICATIONS This PIN detector preamp is intended to function as an optical receiver in intermediate reach SONET, SDH, and DWDM systems operating up to 2.7Gb/s. The device operates in both the 1,310 and 1,550nm wavelength windows. The detector preamplifier is DC coupled and has a differential electrical output. DESCRIPTION This PIN preamplifier uses an InGaAs PIN chip with GaAs transimpedance preamplifier. The HY package is secured by a vertical flange for easy assembly. The package is connected with a single-mode fiber by Nd: YAG welding. This device is in compliance with ITU-T recommendations and meets the Telcordia requirements. ABSOLUTE MAXIMUM RATINGS (Tc=25°C, unless otherwise specified) Symbol Ratings Unit Storage Temperature Tstg -40 to +85 °C Operating Temperature Top -40 to +85 °C Supply Voltage VDD 0 to 4.5 V PIN Reverse Voltage VR 0 to 20 V PIN Reverse Current IR (Peak) 3.0 mA Parameter Edition 1.1 July 2004 1 InGaAs-PIN/Preamp Receiver FRM3Z232HY OPTICAL & ELECTRICAL CHARACTERISTICS (Tc=25°C, λ=1,550nm, VR=+5.0V or +3.3V, VDD=+3.3V, unless otherwise specified) Min. 0.75 0.80 - Limits Typ. 0.80 0.85 0.70 Max. - Pin=-20dBm, f=100MHz, Single-ended 1800 2200 2600 Ω 2.2 2.5 - GHz fcl Pin=-20dBm, -3dBm from 1MHz - 50 75 kHz Peaking dpk Pin=-20dBm, from 1MHz - - 2 dB Group Delay Deviation GD Pin=-20dBm, from 500MHz to 1.75GHz - 60 - psec Output Return Loss S22 Up to 1.75GHz 10 - - Up to 2.5GHz 5 - - Average within 2.2GHz - 9.5 11.0 2.488Gb/s, NRZ, PRBS=223-1, B.E.R.=10-10, Rext=-14dB, Tc=25°C (Note 2) - -25 -24 Tc=-40 to +85°C (Note 2) - -24 -22 0 - - Symbol Test Conditions PIN-PD Responsivity R13 R15 R16 λ = 1,310nm, M=1 λ = 1,550nm, M=1 λ = 1,610nm, M=1 AC Transimpedance Zt BW Parameter Bandwidth Lower Cut-off Frequency Equivalent Input Noise Current Density Sensitivity Maximum Overload in Pr 2.488Gb/s, NRZ, PRBS=223-1, B.E.R.=10-10, Pmax Unit A/W dB pA/ Hz dBm dBm (Note 3) -3 - - Saturated Output Voltage 450 550 800 mV Maximum Output Voltage Swing Vclip Optical Return Loss ORL 30 - - dB Power Supply Current IDD - 45 70 mA Power Supply Voltage VDD 3.15 3.30 3.45 V Note 1: All the parameters are measured with 50Ω AC-coupled. Note 2: With fc = 1866 MHz Bessel filter. Note 3: Defined by a 10% distortion of the wave form. 2 InGaAs-PIN/Preamp Receiver FRM3Z232HY Notes 3 InGaAs-PIN/Preamp Receiver FRM3Z232HY 2.85±0.15 5 cLf P.C.D. 3.0 cLs 0.3 (Note 1) 1 Ø4.6 MAX. (5.5) 2 Label (Ø0.8) cLs 12.0±0.2 4 0 16.0 -0.2 3 UNIT: mm 0.5 MAX. 0.3±0.1 5-Ø0.35±0.05 “HY” PACKAGE 2-2.5 4.0±0.2 6.3±0.5 10.0 MIN. 30.0 MAX. Ø3.0±0.2 Note 3: Detail of flange height and lead rotation. (include stem rotation) For further information please contact: Ø4.1±0.2 45° 6.2 MAX. ° 10 Note 1: cLf : Fiber center line cLs: Stem center line Neither cLf nor cLs are necessarily corresponding Note 2: The fiber length and connector shall be specified in the detail (individual) specification. Ø0.9±0.1 Connector (Note 2) 0° ± L (Note 2) CAUTION Eudyna Devices USA Inc. Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com • Do not put this product into the mouth. Eudyna Devices Europe Ltd. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte Ltd. Hong Kong Branch Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170 4