EUDYNA FRM5N142GW

InGaAs-APD/Preamp
Receiver
FRM5N142GW
FEATURES
• Small Form Factor Package(GW): 9 pins coplanar
• Integrated Design Optimizes Performance at
Bit Rates up to 10.7Gb/s
• High Gain: 4kΩ(Single-ended), 8kΩ(Differential)
• High Sensitivity: -27dBm (typ.)
• Electrical Differential Output
• Wide Bandwidth: 8.5GHz (typ.)
• Operates in both C and L wavelength bands
• Wide Operating Temperature Range: -5°C to +75°C
APPLICATIONS
This APD with HBT preamplifier is intended to function as an optical receiver
at 1,310nm or 1,530-1,610nm in SONET, SDH, DWDM or other optical fiber
systems operating up to 10.7Gb/s. The typical transimpedance (Zt) value
of 4,000Ω optimizes the total bandwidth for 10Gb/s application. The detector
preamplifier is DC coupled and has an electrical differential output.
DESCRIPTION
The FRM5N142GW incorporates a high bandwidth InGaAs APD photo diode, a GaAs
HBT IC amplifier in a hermetically sealed Small Form Factor package (SFF). The APD is
processed with modern MOVPE techniques resulting in a reliable performance over a wide
range of operating conditions. The lens coupling system and the single mode fiber are
assembled using Nd YAG welding.
ABSOLUTE MAXIMUM RATINGS (Tc=25°C)
Parameter
Symbol
Ratings
Unit
Storage Temperature
Tstg
-40 to +85
°C
Operating Temperature
Top
-5 to +75
°C
Supply Voltage
Vss
-6 to 0
V
PIN Reverse Voltage
VR
0 to VB(Note)
V
PIN Reverse Current
IR(peak)
5
mA
Note: Since VB may vary from device-to-device, VB data is attached to each device for reference.
Edition 1.1
October 2003
1
InGaAs-APD/Preamp
Receiver
FRM5N142GW
OPTICAL & ELECTRICAL CHARACTERISTICS
(Tc=25°C, λ=1,550nm, Vss=-5.2V, unless otherwise specified)
λ = 1,310nm, M=1
λ = 1,550nm, M=1
λ = 1,610nm, M=1
Min.
0.70
0.70
-
Limits
Typ.
0.85
0.90
0.80
Max.
-
ID = 10µA
20.0
25.0
30.0
V
γ
Note (1)
0.03
0.05
0.07
V/°C
Zt
f = 750MHz, Single-end
3500
4000
-
Ω
Maximum Output
Voltage Swing
Vclip
Saturated Output Voltage,
Single-ended
250
350
450
mV
M=9
7.5
8.5
-
Bandwidth
BW
M=3
7.5
8.5
-
Symbol
Test Conditions
R13
R15
R16
VB
Temperature
Coefficient of VB
AC Transimpedance
Parameter
APD Responsivity
APD Breakdown Voltage
-3dB from 750MHz,
Pin=-24dBm
Unit
A/W
GHz
fcl
-3dB from 750MHz, Pin=-24dBm
-
40
100
kHz
Peaking
dpk
130MHz to BW, Pin=-24dBm,M=9
-
1.5
2.0
dB
1GHz to 6GHz, Pin=-24dBm, M=9
-
30
-
Group Delay Deviation
GD
1GHz to 8GHz, Pin=-24dBm, M=9
-
60
-
130MHz to 6GHz
-
10
-
130MHz to 8GHz
-
7
-
-
-27.0
-26.0
-25.0
-26.0
-25.0
-24.0
dBm
10Gb/s, NRZ, PRBS=231-1,
B.E.R.=10-12, Rext=13dB, M=3
-4
-2
-
dBm
λ = 1,550nm
27
-
-
λ = 1,310nm
27
-
-
Lower Cut-off Frequency
Output Return Loss
S22
Minimum Sensitivity
Pr
Maximum Overload
Po
Optical Return Loss
ORL
psp-p
10Gb/s, NRZ,
PRBS=231-1,
B.E.R.=10-12,
VR=Optimum
25°C, Rext=13dB
25°C, Rext=10dB
25°C, Rext=8.2dB
75°C, Rext=13dB
dB
dB
Power Supply Current
Iss
-
-
80
130
mA
Power Supply Voltage
Vss
-
-5.46
-5.20
-4.94
V
Thermistor Resistance
Rth
-
9.5
10.0
10.5
kΩ
Thermistor B Constant
B
-
3800
3900
4000
K
Note 1: γ=∆VB/∆Tc
Note: All the parameters are measured with 50Ω, AC-coupled.
2
InGaAs-APD/Preamp
Receiver
FRM5N142GW
Notes
3
InGaAs-APD/Preamp
Receiver
FRM5N142GW
UNIT: mm
“GW” PACKAGE
2.6
0.1
2.0
17.0
13.0
9.0
1
Bending Radius 0.3
0.35 0.25
0.6
2 - R1.1
Ø4.1
4.0
(1.0)
Ø0.9
8 - P0.8=6.4
2 - 0.2
7 - 0.4
Lead Detail (x10)
9
5.5
0.4
6.7
PIN # Symbol
2.3
2.6
5.0
1400 MIN.
28.0 MAX.
1
2
3
4
5
6
7
8
9
VPD
VPreamp
GND
OUT
GND
OUT
GND
Rth
Function
PD BIAS (+)
Preamp BIAS
CASE GROUND
OUTPUT (-)
CASE GROUND
OUTPUT (+)
CASE GROUND
NC
THERMISTOR
For further information please contact:
FUJITSU COMPOUND SEMICONDUCTOR, INC.
CAUTION
2355 Zanker Rd.
San Jose, CA 95131-1138, U.S.A.
Phone: (408) 232-9500
FAX: (408) 428-9111
Fujitsu Compound Semiconductor Products contain gallium arsenide
(GaAs) which can be hazardous to the human body and the environment.
For safety, observe the following procedures:
www.fcsi.fujitsu.com
• Do not put this product into the mouth.
FUJITSU QUANTUM DEVICES EUROPE LTD.
Network House
Norreys Drive
Maidenhead, Berkshire SL6 4FJ
United Kingdom
TEL: +44 (0) 1628 504800
FAX: +44 (0) 1628 504888
FUJITSU QUANTUM DEVICES
SINGAPORE PTE LTD.
Hong Kong Branch
Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui,
Kowloon, Hong Kong
TEL: +852-23770226
FAX: +852-23763269
• Do not alter the form of this product into a gas, powder, or liquid
through burning, crushing, or chemical processing as these by-products
are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this
product. This product must be discarded in accordance with methods
specified by applicable hazardous waste procedures.
FUJITSU QUANTUM DEVICES LIMITED
Business Development Division
11th Floor, Hachioji Daiichi-Seimei Bldg.
3-20-6 Myojin-cho
Hachioji-city, Tokyo 192-0046, Japan
TEL: +81-426-43-5885
FAX: +81-426-43-5582
Fujitsu Limited reserves the right to change products and specifications without notice.
The information does not convey any license under rights of Fujitsu Limited or others.
© 2003 FUJITSU COMPOUND SEMICONDUCTOR, INC.
Printed in U.S.A. FCSI0103M200
4