KINGBRIGHT AA5060SURC/G

5.0X6.0mm SURFACE MOUNT LED LAMP
AA5060SURC/G
HYPER RED
Features
Description
z SINGLE
The Hyper Red source color devices are made with DH
COLOR.
z SUITABLE
FOR ALL SMT ASSEMBLY AND SOLDER
InGaAlP on GaAs substrate Light Emitting Diode.
PROCESS.
z AVAILABLE
z IDEAL
FOR BACKLIGHTING.
z PACKAGE
zRoHS
ON TAPE AND REEL.
: 500PCS / REEL.
COMPLIANT.
.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD0898
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAR/09/2005
DRAWN: S.H.CHEN
PAGE: 1 OF 4
ERP:1201000537
Selection Guide
Part No.
Dice
AA5060SURC/G
Iv (mcd)
@ 50mA
Lens Type
HYPER RED (InGaAlP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ1/2
480
750
100°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Hyper Red
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
640
nm
IF=20mA
Hyper Red
630
nm
IF=20mA
Spectral Line Half-width
Hyper Red
22
nm
IF=20mA
C
Capacitance
Hyper Red
45
pF
VF=0V;f=1MHz
VF
Forward Voltage
Hyper Red
1.9
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
Power dissipation
100
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0898
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAR/09/2005
DRAWN: S.H.CHEN
PAGE: 2 OF 4
ERP:1201000537
Hyper Red
SPEC NO: DSAD0898
APPROVED: J. Lu
AA5060SURC/G
REV NO: V.3
CHECKED: Allen Liu
DATE: MAR/09/2005
DRAWN: S.H.CHEN
PAGE: 3 OF 4
ERP:1201000537
AA5060SURC/G
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
SPEC NO: DSAD0898
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAR/09/2005
DRAWN: S.H.CHEN
PAGE: 4 OF 4
ERP:1201000537