1.6X0.8mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Part Number:APT1608QBC/D BLUE Description z1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. The Blue source color devices are made with AlInGaN zLOW POWER CONSUMPTION. on Sapphire Light Emitting Diode. zWIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. All devices, equipment and machinery must be electrically zPACKAGE: 2000PCS / REEL. grounded. zRoHS COMPLIANT. Package Dimensions Notes: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD9944 REV NO: V.3 DATE: DEC/07/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203001713 Selection Guide Dice Part No. APT1608QBC/D Iv (mcd) [2] @ 20mA Lens Type BLUE (AlInGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 50 100 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.5 4.0 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD9944 REV NO: V.3 DATE: DEC/07/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203001713 Blue APT1608QBC/D SPEC NO: DSAD9944 REV NO: V.3 DATE: DEC/07/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203001713 APT1608QBC/D Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD9944 REV NO: V.3 DATE: DEC/07/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203001713 PACKING & LABEL SPECIFICATIONS APT1608QBC/D SPEC NO: DSAD9944 REV NO: V.3 DATE: DEC/07/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203001713