5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APTKA5614PBC/A BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features z5.6mmX1.4mm RIGHT ANGLE SMT LED, 1.0mm zLOW The Blue source colordevices are made with InGaN on SiC Light Emitting Diode. THICKNESS. Static electricity and surge damage the LEDS. POWER CONSUMPTION. zWIDE VIEWING ANGLE. It is recommended to use a wrist band or zIDEAL FOR BACKLIGHT AND INDICATOR. anti-electrostatic glove when handling the LEDs. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE zRoHS grounded. : 2000PCS / REEL. zMOISTURE All devices, equipment and machinery must be electrically SENSITIVITY LEVEL : LEVEL 4. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4071 REV NO: V.1 DATE: MAY/05/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000775 Selection Guide Dice Part No. APTKA5614PBC/A Iv (mcd) [2] @ 20 mA Lens Type BLUE (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 36 80 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4071 REV NO: V.1 DATE: MAY/05/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000775 Blue APTKA5614PBC/A SPEC NO: DSAH4071 REV NO: V.1 DATE: MAY/05/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000775 APTKA5614PBC/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4071 REV NO: V.1 DATE: MAY/05/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000775 PACKING & LABEL SPECIFICATIONS APTKA5614PBC/A SPEC NO: DSAH4071 REV NO: V.1 DATE: MAY/05/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000775