3.2x2.4mm SMD CHIP LED LAMP Part Number: APBD3224SURKSGC-F01 HYPER RED SUPER BRIGHT GREEN Features Description z3.2x2.4mm zLOW SMT LED, 2.4mm THICKNESS. POWER CONSUMPTION. zIDEAL InGaAlP on GaAs substrate Light Emitting Diode. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE The Hyper Red source color devices are made with DH The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. : 1500PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAF1338 REV NO: V.3 DATE: JUL/13/2006 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203000876-01 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type HYPER RED (InGaAlP) APBD3224SURKSGC-F01 Viewing Angle [1] Min. Typ. 380 800 10 40 2θ1/2 20° WATER CLEAR SUPER BRIGHT GREEN (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 650 565 nm IF=20mA Hyper Red Super Bright Green 635 568 nm IF=20mA Spectral Line Half-width Hyper Red Super Bright Green 28 30 nm IF=20mA C Capacitance Hyper Red Super Bright Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Super Bright Green 1.95 2.2 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Super Bright Green 10 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Green Units 170 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 185 140 mA Power dissipation Reverse Voltage 5 Operating / Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1338 REV NO: V.3 DATE: JUL/13/2006 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203000876-01 APBD3224SURKSGC-F01 Hyper Red SPEC NO: DSAF1338 REV NO: V.3 DATE: JUL/13/2006 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203000876-01 Super Bright Green SPEC NO: DSAF1338 REV NO: V.3 DATE: JUL/13/2006 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203000876-01 APBD3224SURKSGC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1338 REV NO: V.3 DATE: JUL/13/2006 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203000876-01 PACKING & LABEL SPECIFICATIONS APBD3224SURKSGC-F01 SPEC NO: DSAF1338 REV NO: V.3 DATE: JUL/13/2006 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203000876-01