T-1 3/4 (5mm) SOLID STATE LAMP L-53MWC Description Features The source color devices are made with GaN on SiC Light ! HIGH EFFICIENCY. ! WHITE WHITE Emitting Diode. EMISSION,HIGH LUMINOUS INTENSITY. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0683 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/10/2001 DRAWN: J.X.FU PAGE: 1 OF 3 Optical Characteristics Par t No . Dic e L-53MWC Iv (m c d ) @ 20 m A L en s Ty p e WHITE (GaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 80 20 0 30 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er VF Forward Voltage White I Reverse Current White R D ev i c e X Ty p . Max . Un it s Tes t Co n d it io n s 3.8 4.5 V IF=20mA 10 uA V R = 5V pF VF=0V, f =1MHz 0.40 Chromaticity Coordinates White Y C 0.43 Capacitance White 65 Absolute Maximum Ratings at T)=25°°C P ar am e t e r Wh it e Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current[1] 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C 260°C For 5 Seconds Lead Solder Temperature[2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: KDA0683 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/10/2001 DRAWN: J.X.FU PAGE: 2 OF 3 White L-53MWC SPEC NO: KDA0683 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/10/2001 DRAWN: J.X.FU PAGE: 3 OF 3