3.5x2.8 mm SMD CHIP LED LAMP ATTENTION AA3528PWC/J WHITE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES PRELIMINARY SPEC Description Features z SINGLE The source color devices are made with InGaN on SiC Light COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Static electricity and surge damage the LEDS. PROCESS. z AVAILABLE z IDEAL zRoHS It is recommended to use a wrist band or ON TAPE AND REEL. anti-electrostatic glove when handling the LEDs. FOR BACKLIGHTING. z PACKAGE Emitting Diode. All devices, equipment and machinery must be electrically : 1500PCS / REEL. grounded. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF3391 REV NO: V.1 DATE: MAY/09/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201001559 Selection Guide Part No. Dice AA3528PWC/J Iv (mcd) @ 20mA Lens Type WHITE (InGaN) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 380 800 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device VF Forward Voltage White IR Reverse Current White Chromaticity Coordinates White X Typ. Max. Units Test Conditions 3.2 4.0 V IF=20mA 10 uA VR = 5V pF VF=0V;f=1MHz 0.33 Y C 0.34 Capacitance White 110 Absolute Maximum Ratings at TA=25°C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF3391 REV NO: V.1 DATE: MAY/09/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201001559 White AA3528PWC/J SPEC NO: DSAF3391 REV NO: V.1 DATE: MAY/09/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201001559 AA3528PWC/J Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAF3391 REV NO: V.1 DATE: MAY/09/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201001559 PACKING & LABEL SPECIFICATIONS AA3528PWC/J Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or chromaticity), the typical accuracy of the sorting process is as follows: 1. Chromaticity Coordinates X, Y: +/-0.02 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF3391 REV NO: V.1 DATE: MAY/09/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201001559