3.5x2.8mm SURFACE MOUNT LED LAMP KA-3528MWC Features Description !SINGLE COLOR. The source color devices are made with GaN on SiC Light !SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. It is !AVAILABLE ON TAPE AND REEL. recommended to use a wrist band or anti-electrostatic !IDEAL FOR BACKLIGHTING. glove when handling the LEDs. !PACKAGE :1500PCS / REEL. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0690 APPROVED :J.LU REV NO: V.1 CHECKED : DATE: OCT/17/2001 DRAWN:X.Q.ZHENG PAGE: 1 OF 4 Selection Guide Par t No . Dic e KA-3528MWC Iv (m c d ) @ 20 m A L en s Ty p e WHITE (GaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 18 60 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e VF Forward Voltage White IR Reverse Current White Chromaticity Coordinates White X Ty p . Max . Un it s Tes t Co n d it io n s 3.8 4.5 V IF=20mA 10 uA V R = 5V pF VF=0V,f=1MHz 0.35 Y c 0.36 capacitance White 100 Absolute Maximum Ratings at T)=25°°C P ar am e t e r Power dissipation Wh it e Un it s 105 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40 °C To + 85 °C Storage Temperature -40 °C To + 85 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: KDA0690 APPROVED :J.LU REV NO: V.1 CHECKED : DATE: OCT/17/2001 DRAWN:X.Q.ZHENG PAGE: 2 OF 4 White KA-3528MWC KA-3528MWC SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. SPEC NO: KDA0690 APPROVED :J.LU REV NO: V.1 CHECKED : DATE: OCT/17/2001 DRAWN:X.Q.ZHENG PAGE: 3 OF 4 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0690 APPROVED :J.LU REV NO: V.1 CHECKED : DATE: OCT/17/2001 DRAWN:X.Q.ZHENG PAGE: 4 OF 4