T-1 3/4 (5mm) FULL COLOR LED LAMP Part Number: WP154A4SUREPBGVGAC PRELIMINARY SPEC ATTENTION Hyper Red Blue Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z UNIFORM LIGHT OUTPUT. The Hyper Red source color devices are made with DH z LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. z I.C.COMPATIBLE. The Blue source color devices are made with InGaN on SiC z LONG LIFE-SOLID STATE RELIABILITY. Light Emitting Diode. z RoHS COMPLIANT. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 8 ERP: 1101018935 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 650 1300 280 800 480 1200 Hyper Red (InGaAIP) WP154A4SUREPBGVGAC Blue (InGaN) WATER CLEAR Green (InGaN) Viewing Angle [1] 2θ1/2 50° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Blue Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 640 468 520 nm IF=20mA Hyper Red Blue Green 630 470 525 nm IF=20mA Spectral Line Half-width Hyper Red Blue Green 25 21 35 nm IF=20mA C Capacitance Hyper Red Blue Green 45 100 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Blue Green 1.9 3.2 3.2 2.5 4 4 V IF=20mA IR Reverse Current Hyper Red Blue Green 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Blue Green Units Power dissipation 75 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 200 100 100 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 8 ERP: 1101018935 WP154A4SUREPBGVGAC Hyper Red SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 8 ERP: 1101018935 Blue SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 8 ERP: 1101018935 Green SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 8 ERP: 1101018935 PACKING & LABEL SPECIFICATIONS WP154A4SUREPBGVGAC SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 8 ERP: 1101018935 SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 7 OF 8 ERP: 1101018935 SPEC NO: DSAG5775 REV NO: V.2 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 8 OF 8 ERP: 1101018935