2.0x1.25mm SMD CHIP LED LAMP Part Number: APHBM2012PBASURKC PRELIMINARY SPEC ATTENTION Blue Hyper Red OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0mmx1.25mm SMT LED, 0.45mm MAX. THICKNESS. The Blue source color devices are made with InGaN z BI -COLOR, LOW POWER CONSUMPTION. on SiC Light Emitting Diode. z WIDE VIEWING ANGLE. The Hyper Red source color devices are made with DH z IDEAL FOR BACKLIGHT AND INDICATOR. InGaAlP on GaAs substrate Light Emitting Diode. z PACKAGE : 2000PCS / REEL. Static electricity and surge damage the LEDS. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. It is recommended to use a wrist band or anti-electrostatic z RoHS COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG7624 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203005980 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 18 50 70 200 Blue (InGaN) APHBM2012PBASURKC Viewing Angle [1] 2θ1/2 120° WATER CLEAR Hyper Red (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 650 nm IF=20mA Blue Hyper Red 470 635 nm IF=20mA Spectral Line Half-width Blue Hyper Red 21 28 nm IF=20mA C Capacitance Blue Hyper Red 100 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red 3.2 1.95 4 2.5 V IF=20mA IR Reverse Current Blue Hyper Red 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Units Power dissipation 120 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 100 185 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG7624 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203005980 APHBM2012PBASURKC Blue SPEC NO: DSAG7624 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203005980 Hyper Red SPEC NO: DSAG7624 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203005980 APHBM2012PBASURKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG7624 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203005980 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG7624 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu APHBM2012PBASURKC DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203005980