AC Current transducer AK-B- IPN = 10..200A A split Core transducer for the electronic measurement AC sinusoidal waveforms current, with galvanic isolation between the primary (High power) and the secondary circuits (Electronic circuit). Jumper selectable ranges and self powered transducers. Electrical data Features Primary Nominal Current Analogue Output Signal1) IPN (A.t RMS) Type VOUT (V DC) 10,20,50 5 AK 50 B5 10,20,50 10 AK 50 B10 100,150,200 5 AK 200 B5 100,150,200 10 AK 200 B10 RoHS • AC sinusoïdal measurement Date Code • Average responding JULY 2006 • Split core box • Self powered transducers • Panel mounting JULY 2006 • Voltage output • Jumper selectable ranges Vc Supply voltage Self Powered RL Load resistance 1 MΩ Vb Rated voltage (CAT III, PD2) 150 V AC Vd RMS Isolation voltage test, 50 Hz, 1mn f Frequency bandwith 3 50-60 kV AC Hz Advantages • Large aperture • High isolation between primary and secondary circuits • Easy to mount Accuracy - Dynamic performance data X Accuracy @ IPN, TA=25°C ±1 tr Response time @ 90% of IPN < 100 % Applications mS • Automation systems General data TA Ambient operating temperature (0-95% RH) -20..+50 °C TS Ambient storage temperature -20..+85 °C m Mass Protection type Safety EMC 120 IP20 IEC 61010-1 EN 61326 g Note: 1) For 0-5 V output model, no saturation output up to 8.2 V and for 0-10 V output model, no saturation output up to 15 V Analog current reading for remote monitoring (e.g. motor). • Data loggers Self-powered transducer does not drain data logger batteries. • Panel meters Simple connection displays power consumption. Options on request • DIN mounting 060816/6 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice. LEM page 1/2 www .lem.com Dimensions AK-B- (unit : mm, 1mm = 0.0394 inch) Remark Mechanical characteristics • General tolerance ± 1 mm • Primary aperture 21.7 mm sq. • Panel mounting 2 holes ∅ 4.5mm Distance between holes • Temperature of the primary conductor should not exceed 60°C. 77.3 mm Connections • 2 x UNC8 Cylindric Head 060816/6 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice. LEM page 2/2 www .lem.com