54F/74F189 64-Bit Random Access Memory with TRI-STATEÉ Outputs General Description Features The ’F189 is a high-speed 64-bit RAM organized as a 16word by 4-bit array. Address inputs are buffered to minimize loading and are fully decoded on-chip. The outputs are TRISTATE and are in the high impedance state whenever the Chip Select (CS) input is HIGH. The outputs are active only in the Read mode and the output data is the complement of the stored data. Y Commercial Y Y Y Y TRI-STATE outputs for data bus applications Buffered inputs minimize loading Address decoding on-chip Diode clamped inputs minimize ringing Available in SOIC, (300 mil only) Package Number Military Package Description N16E 16-Lead (0.300× Wide) Molded Dual-In-Line J16A 16-Lead Ceramic Dual-In-Line 74F189SC (Note 1) M16A 16-Lead (0.150× Wide) Molded Small Outline, JEDEC 74F189SJ (Note 1) M16D 16-Lead (0.300× Wide) Molded Small Outline, EIAJ 54F189FL (Note 2) W16A 16-Lead Cerpack 54F189LL (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C 74F189PC 54F189DL (Note 2) Note 1: Devices also available in 13× reel. Use suffix e SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix e DLQB, FLQB and LLQB. Logic Symbols Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak Pin Assignment for LCC TL/F/9493–1 IEEE/IEC TL/F/9493 – 2 TL/F/9493 – 3 TL/F/9493–4 TRI-STATEÉ is a registered trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation TL/F/9493 RRD-B30M105/Printed in U. S. A. 54F/74F189 64-Bit Random Access Memory with TRI-STATE Outputs August 1995 Unit Loading/Fan Out 54F/74F Pin Names A0 – A3 CS WE D0 – D3 O 0 – O3 Description U.L. HIGH/LOW Input IIH/IIL Output IOH/IOL Address Inputs Chip Select Input (Active LOW) Write Enable Input (Active LOW) Data Inputs Inverted Data Outputs 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 150/40 (33.3) 20 mA/b0.6 mA 20 mA/b1.2 mA 20 mA/b0.6 mA 20 mA/b0.6 mA b 3.0 mA/24 mA (20 mA) Function Table Inputs CS WE L L H L H X Operation Condition of Outputs Write Read Inhibit High Impedance Complement of Stored Data High Impedance H e HIGH Voltage Level L e LOW Voltage Level X e Immaterial Block Diagram TL/F/9493 – 5 2 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Storage Temperature b 65§ C to a 150§ C Ambient Temperature under Bias Junction Temperature under Bias Plastic b 55§ C to a 125§ C Free Air Ambient Temperature Military Commercial b 55§ C to a 125§ C 0§ C to a 70§ C Supply Voltage Military Commercial b 55§ C to a 175§ C b 55§ C to a 150§ C a 4.5V to a 5.5V a 4.5V to a 5.5V VCC Pin Potential to Ground Pin b 0.5V to a 7.0V b 0.5V to a 7.0V Input Voltage (Note 2) b 30 mA to a 5.0 mA Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC e 0V) b 0.5V to VCC Standard Output b 0.5V to a 5.5V TRI-STATE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol 54F/74F Parameter Min VIH Input HIGH Voltage VIL Input LOW Voltage VCD Input Clamp Diode Voltage VOH Output HIGH Voltage Typ Units 2.0 54F 10% VCC 54F 10% VCC 74F 10% VCC 74F 10% VCC 74F 5% VCC 74F 5% VCC VCC Conditions Max V Recognized as a HIGH Signal 0.8 V Recognized as a LOW Signal b 1.2 V 2.5 2.4 2.5 2.4 2.7 2.7 Min IIN e b18 mA V Min IOH IOH IOH IOH IOH IOH IOL e 20 mA IOL e 24 mA e e e e e e b 1 mA b 3 mA b 1 mA b 3 mA b 1 mA b 3 mA VOL Output LOW Voltage 54F 10% VCC 74F 10% VCC 0.5 0.5 V Min IIH Input HIGH Current 54F 74F 20.0 5.0 mA Max VIN e 2.7V IBVI Input HIGH Current Breakdown Test 54F 74F 100 7.0 mA Max VIN e 7.0V ICEX Output HIGH Leakage Current 54F 74F 250 50 mA Max VOUT e VCC VID Input Leakage Test 74F V 0.0 IID e 1.9 mA All Other Pins Grounded IOD Output Leakage Circuit Current 74F 3.75 mA 0.0 VIOD e 150 mV All Other Pins Grounded IIL Input LOW Current b 0.6 b 1.2 mA Max VIN e 0.5V (except CS) VIN e 0.5V (CS) IOZH Output Leakage Current 50 mA Max VOUT e 2.7V IOZL Output Leakage Current IOS Output Short-Circuit Current IZZ Bus Drainage Test ICCZ Power Supply Current 4.75 b 60 37 3 b 50 mA Max VOUT e 0.5V b 150 mA Max VOUT e 0V 500 mA 0.0V VOUT e 5.25V 55 mA Max VO e HIGH Z AC Electrical Characteristics Symbol Parameter 74F 54F 74F TA e a 25§ C VCC e a 5.0V CL e 50 pF *TA, VCC e Mil CL e 50 pF TA, VCC e Com CL e 50 pF Units Min Typ Max Min Max Min Max tPLH tPHL Access Time, HIGH or LOW An to On 10.0 8.0 18.5 13.5 26.0 19.0 9.0 8.0 32.0 23.0 10.0 8.0 27.0 20.0 ns tPZH tPZL Access Time, HIGH or LOW CS to On 3.5 5.0 6.0 9.0 8.5 13.0 3.5 5.0 10.5 15.0 3.5 5.0 9.5 14.0 ns tPHZ tPLZ Disable Time, HIGH or LOW CS to On 2.0 3.0 4.0 5.5 6.0 8.0 2.0 2.5 8.0 10.0 2.0 3.0 7.0 9.0 ns tPZH tPZL Write Recovery Time, HIGH or LOW WE to On 6.5 6.5 15.0 11.0 28.0 15.5 6.5 6.5 37.5 17.5 6.5 6.5 29.0 16.5 ns tPHZ tPLZ Disable Time, HIGH or LOW WE to On 4.0 5.0 7.0 9.0 10.0 13.0 3.5 5.0 12.0 15.0 4.0 5.0 11.0 14.0 ns AC Operating Requirements Symbol Parameter 74F 54F 74F TA e a 25§ C VCC e a 5.0V *TA, VCC e Mil TA, VCC e Com Min Min Min Max Max ts(H) ts(L) Setup Time, HIGH or LOW An to WE 0 0 0 0 0 0 th(H) th(L) Hold Time, HIGH or LOW An to WE 2.0 2.0 2.0 2.0 2.0 2.0 ts(H) ts(L) Setup Time, HIGH or LOW Dn to WE 10.0 10.0 11.0 11.0 10.0 10.0 th(H) th(L) Hold Time, HIGH or LOW Dn to WE 0 0 2.0 2.0 0 0 ts(L) Setup Time, LOW CS to WE 0 0 0 th(L) Hold Time, LOW CS to WE 6.0 7.5 6.0 tw(L) WE Pulse Width, LOW 6.0 15.0 6.0 Units Max ns ns ns *TA e b 55§ C to a 125§ C 4 ns Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: 74F 189 S Temperature Range Family 74F e Commercial 54F e Military C X Special Variations X e Devices shipped in 13× reels QB e Military grade with environmental and burn-in processing shipped in tubes Device Type Package Code P e Plastic DIP D e Ceramic DIP F e Flatpak L e Leadless Ceramic Chip Carrier (LCC) S e Small Outline SOIC JEDEC SJ e Small Outline SOIC EIAJ Temperature Range C e Commercial (0§ C to a 70§ C) L e Military (b40§ C to a 125§ C) Physical Dimensions inches (millimeters) 20-Lead Ceramic Leadless Chip Carrier (L) NS Package Number E20A 5 Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Dual-In-Line Package (D) NS Package Number J16A 16-Lead (0.150× Wide) Molded Small Outline Package, JEDEC (S) NS Package Number M16A 6 Physical Dimensions inches (millimeters) (Continued) 16-Lead (0.300× Wide) Molded Dual-In-Line Package (P) NS Package Number N16E 16-Lead (0.300× Wide) Molded Small Outline Package, EIAJ (SJ) NS Package Number M16D 7 54F/74F189 64-Bit Random Access Memory with TRI-STATE Outputs Physical Dimensions inches (millimeters) (Continued) 16 Lead Ceramic Flatpak (F) NS Package Number W16A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.