54F/74F174 Hex D Flip-Flop with Master Reset General Description Features The ’F174 is a high-speed hex D flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information on the D inputs is transferred to storage during the LOW-to-HIGH clock transition. The device has a Master Reset to simultaneously clear all flip-flops. Y Commercial Y Y Y Edge-triggered D-type inputs Buffered positive edge-triggered clock Asynchronous common reset Guaranteed 4000V minimum ESD protection Package Number Military Package Description N16E 16-Lead (0.300× Wide) Molded Dual-In-Line J16A 16-Lead Ceramic Dual-In-Line 74F174SC (Note 1) M16A 16-Lead (0.150× Wide) Molded Small Outline, JEDEC 74F174SJ (Note 1) M16D 16-Lead (0.300× Wide) Molded Small Outline, EIAJ 54F174FM (Note 2) W16A 16-Lead Cerpack 54F174LM (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C 74F174PC 54F174DM (Note 2) Note 1: Devices also available in 13× reel. Use Suffix e SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix e DMQB, FMQB and LMQB. Logic Symbols Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak Pin Assignment for LCC TL/F/9489–3 TL/F/9489 – 1 IEEE/IEC TL/F/9489 – 2 TL/F/9489–5 TRI-STATEÉ is a registered trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation TL/F/9489 RRD-B30M75/Printed in U. S. A. 54F/74F174 Hex D Flip-Flop with Master Reset November 1994 Unit Loading/Fan Out 54F/74F Pin Names D0 – D5 CP MR Q0 – Q5 Description U.L. HIGH/LOW Input IIH/IIL Output IOH/IOL Data Inputs Clock Pulse Input (Active Rising Edge) Master Reset Input (Active LOW) Outputs 1.0/1.0 1.0/1.0 1.0/1.0 50/33.3 20 mA/b0.6 mA 20 mA/b0.6 mA 20 mA/b0.6 mA b 1 mA/20 mA Functional Description Truth Table The ’F174 consists of six edge-triggered D flip-flops with individual D inputs and Q outputs. The Clock (CP) and Master Reset (MR) are common to all flip-flops. Each D input’s state is transferred to the corresponding flip-flop’s output following the LOW-to-HIGH Clock (CP) transition. A LOW input to the Master Reset (MR) will force all outputs LOW independent of Clock or Data inputs. The ’F174 is useful for applications where the true output only is required and the Clock and Master Reset are common to all storage elements. Inputs Outputs MR CP Dn Qn L H H X L L X H L L H L H e HIGH Voltage Level L e LOW Voltage Level X e Immaterial L e LOW-to-HIGH Clock Transition Logic Diagram TL/F/9489 – 4 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. 2 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Storage Temperature b 65§ C to a 150§ C Ambient Temperature under Bias Junction Temperature under Bias Plastic b 55§ C to a 125§ C Free Air Ambient Temperature Military Commercial b 55§ C to a 125§ C 0§ C to a 70§ C Supply Voltage Military Commercial b 55§ C to a 175§ C b 55§ C to a 150§ C a 4.5V to a 5.5V a 4.5V to a 5.5V VCC Pin Potential to Ground Pin b 0.5V to a 7.0V b 0.5V to a 7.0V Input Voltage (Note 2) b 30 mA to a 5.0 mA Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC e 0V) b 0.5V to VCC Standard Output b 0.5V to a 5.5V TRI-STATEÉ Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) ESD Last Passing Voltage (Min) 4000V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol 54F/74F Parameter Min VIH Input HIGH Voltage VIL Input LOW Voltage VCD Input Clamp Diode Voltage VOH Output HIGH Voltage 54F 10% VCC 74F 10% VCC 74F 5% VCC VOL Output LOW Voltage 54F 10% VCC 74F 10% VCC IIH Input HIGH Current IBVI Typ Units VCC Conditions Max 2.0 V Recognized as a HIGH Signal 0.8 V b 1.2 V Min IIN e b18 mA V Min IOH e b1 mA IOH e b1 mA IOH e b1 mA 0.5 0.5 V Min IOL e 20 mA IOL e 20 mA 54F 74F 20.0 5.0 mA Max VIN e 2.7V Input HIGH Current Breakdown Test 54F 74F 100 7.0 mA Max VIN e 7.0V ICEX Output HIGH Leakage Current 54F 74F 250 50 mA Max VOUT e VCC VID Input Leakage Test 74F V 0.0 IID e 1.9 mA All Other Pins Grounded IOD Output Leakage Circuit Current 74F 3.75 mA 0.0 VIOD e 150 mV All Other Pins Grounded IIL Input LOW Current IOS Output Short-Circuit Current ICCH Power Supply Current ICCL Power Supply Current 2.5 2.5 2.7 4.75 Recognized as a LOW Signal b 0.6 mA Max VIN e 0.5V b 150 mA Max VOUT e 0V 30 45 mA Max CP e L Dn e MR e HIGH 30 45 mA Max VO e LOW b 60 3 AC Electrical Characteristics Symbol Parameter Min 74F 54F 74F TA e a 25§ C VCC e a 5.0V CL e 50 pF TA, VCC e Mil CL e 50 pF TA, VCC e Com CL e 50 pF Typ Max Min Max Min 70 Units Max fmax Maximum Clock Frequency 80 80 tPLH tPHL Propagation Delay CP to Qn 3.5 4.0 5.5 7.0 8.0 10.0 3.0 4.0 10.0 12.0 3.5 4.0 9.0 11.0 MHz ns tPHL Propagation Delay MR to Qn 5.0 10.0 14.0 5.0 16.0 5.0 15.0 ns AC Operating Requirements Symbol Parameter 74F 54F 74F TA e a 25§ C VCC e a 5.0V TA, VCC e Mil TA, VCC e Com Min Min Min Max Max Units Max ts(H) ts(L) Setup Time, HIGH or LOW Dn to CP 4.8 4.0 5.0 5.0 4.8 4.0 th(H) th(L) Hold Time, HIGH or LOW Dn to CP 0 0 2.0 2.0 0 0 tw(H) tw(L) CP Pulse Width HIGH or LOW 4.0 6.0 5.0 7.5 4.0 6.0 ns ns tw(L) MR Pulse Width, LOW 5.0 6.5 5.0 trec Recovery Time, MR to CP 5.0 6.0 5.0 4 ns Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: 74F 174 S Temperature Range Family 74F e Commercial 54F e Military C X Special Variations QB e Military grade device with environmental and burn-in processing X e Devices shipped in 13× reel Device Type Package Code P e Plastic DIP D e Ceramic DIP F e Flatpak L e Leadless Chip Carrier (LCC) S e Small Outline SOIC JEDEC SS e Small Outline SOIC EIAJ Temperature Range C e Commercial (0§ C to a 70§ C) M e Military (b55§ C to a 125§ C) Physical Dimensions inches (millimeters) 20-Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 5 Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Dual-In-Line Package (D) NS Package Number J16A 16-Lead (0.150× Wide) Molded Small Outline Package, JEDEC (S) NS Package Number M16A 6 Physical Dimensions inches (millimeters) (Continued) 16-Lead (0.300× Wide) Molded Small Outline Package, EIAJ (SJ) NS Package Number M16D 16-Lead (0.300× Wide) Molded Dual-In-Line Package (P) NS Package Number N16E 7 54F/74F174 Hex D Flip-Flop with Master Reset Physical Dimensions inches (millimeters) (Continued) 16 Lead Ceramic Flatpak (F) NS Package Number W16A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 2900 Semiconductor Drive P.O. Box 58090 Santa Clara, CA 95052-8090 Tel: 1(800) 272-9959 TWX: (910) 339-9240 National Semiconductor GmbH Livry-Gargan-Str. 10 D-82256 F4urstenfeldbruck Germany Tel: (81-41) 35-0 Telex: 527649 Fax: (81-41) 35-1 National Semiconductor Japan Ltd. Sumitomo Chemical Engineering Center Bldg. 7F 1-7-1, Nakase, Mihama-Ku Chiba-City, Ciba Prefecture 261 Tel: (043) 299-2300 Fax: (043) 299-2500 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductores Do Brazil Ltda. Rue Deputado Lacorda Franco 120-3A Sao Paulo-SP Brazil 05418-000 Tel: (55-11) 212-5066 Telex: 391-1131931 NSBR BR Fax: (55-11) 212-1181 National Semiconductor (Australia) Pty, Ltd. Building 16 Business Park Drive Monash Business Park Nottinghill, Melbourne Victoria 3168 Australia Tel: (3) 558-9999 Fax: (3) 558-9998 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.