HI-SINCERITY Spec. No. : HE200901 Issued Date : 2009.08.14 Revised Date : Page No. : 1/4 MICROELECTRONICS CORP. HST04 TRIAC 600V,4A Description Passivated, sensitive gate triacs in a plastic envelope, intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. TO-220AB Pin Configuration Pin Description 1 Main terminal 1 2 Main terminal 2 3 Gate tab Symbol tab T2 T1 1 2 3 G Main terminal 2 Limtiing Values Symbol Parameter Min. Max. Units VDRM Repetitive peak off-state voltages - 600 V IT(RMS) RMS on-state current - 4 A Non-repetitive peak on-state current(F=50Hz,tp=20ms) - 40 A - 8.0 A2S - 10 A/us Peak gate current(tp=20us,Tj=125°C) - 2 A PG(AV) Average gate power - 1 W Tstg Storage Temperature Range -40 150 °C Operating junction temperature -40 125 °C ITSM 2 It dIT/dt IGM Tj HST04 Series 2 I t for fusing (IT=10ms) Repetitive rate of rise of on-state current after triggering (F=50Hz,IG=50mA,dIg/dt=0.1us) HSMC Product Specification HI-SINCERITY Spec. No. : HE200901 Issued Date : 2009.08.14 Revised Date : Page No. : 2/4 MICROELECTRONICS CORP. Electrical Characteristics (Ta=25°C, unless otherwise stated,) Symbol Parameter IGT Gate Trigger Current (VD=12V) IL Latching Current (IT=1.2 IGT,Tj=25°C) IH Holding Current(IT=0.1A,) VTM VGT ID Rank Quadrant T D S A Unit I - II - III MAX 5 5 10 10 mA IV MAX 5 10 10 25 mA 10 10 20 20 mA 20 20 40 40 mA 15 15 25 25 mA I - III- IV TYP II ALL On-state Voltage MAX 1.65 V 1.5 V Off-state Leakage Current TC=25°C 10 uA (VD = VDRM(max) 1 mA (IT=5.5A,tp=380us,Tj=25°C) Gate Trigger Voltage (VD=12V, Tj=25°C) TC=125°C Static Characteristics Symbol dVD/dt Parameter Critical rate of rise of off-state voltage Conditions Min. Typ. Max. Unit VDM=400VTj= 125°C; exponential waveform; gate open circuit - 10 - V/us Min. Typ. Max. Unit Thermal Resistances Symbol Rth j-c HST04 Series Parameter Thermal resistance junction to mounting base 2.4 °C/W HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Spec. No. : HE200901 Issued Date : 2009.08.14 Revised Date : Page No. : 3/4 TO-220AB Dimension Marking: A F B E C D H M I K 3 G N 2 1 Tab O P J L Note: Green label is used for pb-free packing Pin Style: 1. Main terminal 1 2 & Tab. Main terminal 2 3.Gate Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 DIM A B C D E F G H I J K L M N O P Min. 5.58 8.38 4.40 1.15 0.35 2.03 9.66 3.00 0.75 2.54 1.14 12.70 14.48 Max. 7.49 8.90 4.70 1.39 0.60 2.92 10.28 *16.25 *3.83 4.00 0.95 3.42 1.40 *2.54 14.27 15.87 *: Typical, Unit: mm 3-Lead TO-220AB Plastic Package HSMC Package Code: E Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. • HSMC reserves the right to make changes to its products without notice. • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: • Head Office (Hi-Sincerity Microelectronics Corp.):3F, No.72, Sec. 2, Nanjing E. Rd., Zhongshan Dist., Taipei City 104, Taiwan (R.O.C.). Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454 HST04 Series HSMC Product Specification HI-SINCERITY Spec. No. : HE200901 Issued Date : 2009.08.14 Revised Date : Page No. : 4/4 MICROELECTRONICS CORP. Soldering Methods for HSMC’s Products 1. Storage environment: Temperature=10oC~35oC Humidity=65%±15% 2. Reflow soldering of surface-mount devices Figure 1: Temperature profile tP Critical Zone TL to TP TP Ramp-up TL tL Temperature Tsmax Tsmin tS Preheat Ramp-down 25 t 25oC to Peak Time Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly <3 C/sec <3oC/sec - Temperature Min (Tsmin) 100oC 150oC - Temperature Max (Tsmax) 150oC 200oC 60~120 sec 60~180 sec <3oC/sec <3oC/sec 183oC 217oC Average ramp-up rate (TL to TP) o Preheat - Time (min to max) (ts) Tsmax to TL - Ramp-up Rate Time maintained above: - Temperature (TL) - Time (tL) 60~150 sec Peak Temperature (TP) Time within 5oC of actual Peak Temperature (tP) Ramp-down Rate Time 25oC to Peak Temperature o o 60~150 sec 240 C +0/-5 C 260oC +0/-5oC 10~30 sec 20~40 sec <6oC/sec <6oC/sec <6 minutes <8 minutes Peak temperature Dipping time 245 C ±5 C 5sec ±1sec 3. Flow (wave) soldering (solder dipping) Products Pb devices. Pb-Free devices. HST04 Series o o o o 260 C +0/-5 C 5sec ±1sec HSMC Product Specification