FTR-K1 SERIES POWER RELAY 1 POLE - 3, 5A Medium Load Control JY Series n FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption l High insulation l Wide operating range l DIL pitch terminals l Plastic sealed type, RTIII l Socket mounting type and socket available l Compatible with solid state relays type SJ l RoHS compliant. Please see page 7 for more information l l n PARTNUMBER INFORMATION [Example] (a) JY - 12 (a) (b) H (c) E - K (d) (e) Relay type JY P* (f ) : JY Series (b) Coil rated voltage 12 (c) Contact style Nil H W : 4.5....48VDC Coil rating table at page 3 (d) Contact material Nil Nil E : Gold-plate silver cadmium oxide (single contact type) : Gold overlay silver alloy (bifurcated contact type) : Silver cadmium oxide (single contact type) (e) K : Plastic sealed type, RTIII Nil P : PC board mounting type : Socket mounting type (without JY-W) Enclosure (f) Terminal type : 3A (Single contact) : 5A (Single contact) : 3A (Bifurcated contact) Note: Actual marking omits the hyphen (-) of (*) 1 FTR-K1 SERIES JY SERIES n SPECIFICATION Item 3A Type JY - ( ) W Contact Data Life Coil Data Timing Data Insulation JY - ( ) JY - ( ) E JY - ( ) H JY - ( ) HE Gold-plate silver cadmium oxide Silver cadmium oxide Max. 30 mOhm Max. 100 mOhm Configuration 1 form A (SPST-NO) Construction Bifurcated Single Material Gold-overlay silver alloy AgNi Gold-plate Silver silver cadmium cadmium oxide oxide Resistance (initial) (at 6 VDC, 1A) Max. 30 mOhm Max. 100 mOhm Contact rating 3A, 250VAC / 30VDC 5A, 250VAC / 30VDC Max. carrying current 5A Max. switching voltage 250VAC / 150 VDC Max. switching power 750VA, 90W Max. switching current 3A Min. switching load * 0.1mA 10mA 100 mVDC 5VDC Mechanical Min. 20 x 106 operations Electrical Min. 100 x 103 operations (contact rating) Rated power (at 20 °C) 200 mW (48V type: 360 mW) Operate power (at 20 °C) 100 mW (48V type: 170 mW) Operating temperature range -40 °C to +90 °C (no frost) (48V type: +80 °C) Operate (at nominal voltage) Max. 6 ms (without bounce) Release (at nominal voltage) Max. 3 ms (no diode) Resistance (initial) Min. 1,000MOhm at 500VDC Dielectric strength Surge strength Other 5A Type Vibration resistance Shock 1,250VA, 150W 100mA 5VDC Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Coil to contacts 4,000V / 1.2 x 50µs standard wave Misoperation 10 to 55Hz double amplitude 1.5 mm Endurance 10 to 55Hz double amplitude 4.5 mm Misoperation Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Weight Approximately 5 g Sealing Plastic sealed, RTIII 10mA 5VDC 100mA 5VDC * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2 JY SERIES FTR-K1 SERIES n COIL RATING Coil Code Coil Code 4.5 4.5 5 Rated Coil Voltage (VDC) 5A type 3A type Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must ReleaseRated Power Voltage (mW) (VDC) * 4.5 100 3.1 0.23 5 5 125 3.5 0.25 6 6 6 180 4.2 0.3 9 9 9 405 6.3 0.45 12 12 12 720 8.4 0.6 18 18 18 1,620 12.6 0.9 24 24 24 2,880 16.8 1.2 48 48 48 6,400 32.6 2.4 101 - 23.5 2,760 15.5 1.18 105 - 12 720 8.4 0.6 107 - 5 125 3.5 0.25 200 360 200 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E56140 CSA C22.2 No. 14 LR 35579 VDE (JY..W-K type) VDE 0435 part 201 [JY-H, JY-HE] 5A, 250 VAC / 30 VDC (resistive) 1/8 HP, 125VAC, 250 VAC Pilot duty code C150 [JY, JY-W, JY-E] 3A, 250 VAC / 30 VDC (resistive) 1/10 HP, 125VAC, 250 VAC Pilot duty: C150 3A, 250VAC, cos φ1, 100K 3A, 30VDC, 0msec. 100K 3 FTR-K1 SERIES JY SERIES n CHARACTERISTIC DATA n REFERENCE DATA 4 FTR-K1 SERIES JY SERIES 5 FTR-K1 SERIES JY SERIES n DIMENSIONS 6 FTR-K1 SERIES JY SERIES RoHS Compliance and Lead Free Information 1. General Information All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. l 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 7 FTR-K1 SERIES JY SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. August 6, 2010. 8