FTR-K1 SERIES POWER RELAY 2 POLE - 5A - 1.5mm contact gap FTR-F4G Series n FEATURES 2 Pole, 5A 2 Form A l Contact gap 1.5mm l Sealed type available l High insulation in small package (between coil and contact) - Insulation distance: min 8.0mm - Dielectric strength: 5,000VAC - Surge strength: 10,000V l Flammability UL94V-0 (plastics) l RoHS compliant Features cadmium-free contacts Please see page 5 for more information l l n PARTNUMBER INFORMATION [Example] (a) FTR-F4G A K 012 (a) (b) (c) (d) Relay type (b) Contact configuration (c) Coil type T - KW (e) (f ) FTR-F4G: FTR-F4G-Series A : 2 form A K : Standard type (0.8W) (d) Coil rated voltage 012 : 3.....60 VDC Coil rating table at page 3 (e) T : Silver alloy / TV-3 rating Nil KW : Flux free type : Plastic sealed type Contact material / TV rating (f) Optional type Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-F4GAK012T Actual marking: F4GAK012T 1 FTR-K1 SERIES FTR-F4G SERIES n SPECIFICATION Item Contact Data Life FTR-F4G flux free type Configuration 2 form A Material Silver alloy Resistance (initial) Max. 100mΩ at 1A, 6VDC Contact rating 5A, 250VAC (resistive) Max. carrying current 5A Max. switching current 5A Max. switching voltage 400VAC Max. switching power 1,250VA Min. switching load (reference) 100 mA, 5VDC Mechanical Min. 500 x 103 operations FTR-F4G-KW plastic sealed type 5A, 250VAC Min. 20 x 103 operations 5A, 250VAC Min. 100 x 103 operations Electrical (resistive) 250VAC, 250W Min. 100 x 103 operations 110VAC, 250W Min. 100 x 103 operations Coil Data Timing Data Insulation Rated power (at 20 °C) Approximately 0.8W Operating temperature range -40 °C to +70 °C (no frost) Operate (at nominal voltage) Max. 12ms (without bounce) Release (at nominal voltage) Max. 5ms (without bounce) Contact gap (initial) Minimum 1.5mm Resistance (initial) Min. 1,000MΩ at 500VDC Dielectric strength Surge strength Other Vibration resistance Shock resistance Weight Open contacts 1,500VAC, 1min. Contacts sets 3,000VAC, 1min. Coil and contacts 5,000VAC, 1min. Coil to contacts 10,000V / 1.2 x 50µs standard wave Misoperation 10 to 55Hz double amplitude 1.5 mm Endurance 10 to 55Hz double amplitude 1.5 mm Misoperation Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Approximately 18 g 2 FTR-K1 SERIES FTR-F4G SERIES n COIL RATING Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 003 3 11.3 2.1 0.15 005 5 31 3.5 0.25 006 6 45 4.2 0.3 009 9 101 6.3 0.45 012 12 180 8.4 0.6 018 18 405 12.6 0.9 024 24 720 16.8 1.2 048 48 2,880 33.6 2.4 060 60 4,500 42.0 6.0 Rated Power (W) Approx. 0.8 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 5A, 277VAC, resistive TV-3, 125VAC C22.2 No.14 (cULus) TUV IEC/EN61810-1 EN60730-1 EN60335-1 EN60950-1 EN60065 5A, 250VAC (cosφ=1) 70°C 3 / 51A, 250VAC, 70°C 3 FTR-K1 SERIES FTR-F4G SERIES n CHARACTERISTIC DATA n DIMENSIONS l Dimensions Unit: mm l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) 4 FTR-K1 SERIES FTR-F4G SERIES RoHS Compliance and Lead Free Information 1. General Information All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. l 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: Duration: maximum 360˚C maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 5 FTR-K1 SERIES FTR-F4G SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2011 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. April 15, 2011 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fujitsu: FTR-F4GAK005T-KW FTR-F4GAK012T-KW FTR-F4GAK024T-KW