MAH Series 14 Pin DIP Oscillator Industry Standard Package RoHS Compliant Available HCMOS Output Wide Frequency Range Frequency Range Frequency Stability (Inclusive of Temperature, Load, Voltage and Aging) Operating Temperature Storage Temperature Waveform Logic “0” Logic “1” Duty Cycle 50% OF Waveform Load Start Up Time Rise/Fall Time Standby Current Consumption Supply Voltage (VDC ±10%) – Supply Current (in mA max) 5.000kHz to 1.000MHz 1.001MHz to 24.000MHz 24.001MHz to 50.000MHz 50.001MHz to 70.000MHz 70.001MHZ to 200.000MHZ 24.000MHz to 30.000MHz 30.001MHz to 80.000MHz Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 5.000kHZ to 200.000MHz See Part Number Guide See Part Number Guide -55°C to +125°C HCMOS 10% Vdd max 90% Vdd min See Part Number Guide 50pF max 10mSec max Up to 70.000MHZ Above 70.000MHZ 100µA +5.0 +3.3 35 10 45 25 55 35 60 35 85 40 NA NA NA NA 6 nSec max 4 nSec max +2.5/+1.8 NA NA NA NA NA 20 40 Marking Detail Line 1 = MXXXXX M = XXXXX = Line 2 = SYYWWL S = = YYWW MMD Frequency in MHZ Internal Code 4 Numerical Digit Date Code (Year / Week) Denotes RoHS Compliant L = Line 3 = XXXXX Internal use only May vary with lots Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] In the event of conflict, the requirements of this specification shall govern. Revisions only with customer approval Revision: 04/08/11 G Pg 1 of 2 Part Number Guide FREQUENCY MAH 14 pin DIP Blank = Not Compliant F = Is RoHS Compliant Supply Voltage 5 = +5.0 VDC 3 = +3.3 VDC 2 = +2.5 VDC 1 = +1.8 VDC Value Added Options Blank = No Added Options G = Gull-Wing (option 2) CLXXX = Cut Leads XXX = Lead Length Code Symmetry Blank = 40/60% A = 45/55% B = 47.5/52.5% RoHS Compliant Frequency Stability 010 = ±10 ppm 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection Blank = No Connect H = Tri-state S = Standby PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS Mechanical Details 20.70 [.815] MAX 5.08 [.200] MXXXXX SYYWWL XXXXX 5.08 [.200] MIN .50 [.020] 15.24 [.600] 1 13.10 [.516] MAX 7 PIN CONNECTIONS PIN 1 N/C, TRI-STATE or STANDBY PIN 7 CASE GROUND PIN 8 OUTPUT PIN 14 SUPPLY VOLTAGE 7.62 [.300] 14 8 TRI-STATE OPERATION PIN 1 PIN 8 LOGIC "1" OR N/C OSCILLATION LOGIC "0" OR GRD HIGH IMPEDANCE DIMENSIONS IN BRACKET ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMENDED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] In the event of conflict, the requirements of this specification shall govern. Revisions only with customer approval Revision: 04/08/11 G Pg 2 of 2