MVLP, MVLL & MVLV Series VCXO MIL-STD-883 Level B Screening Available Available to -55°C to + 125° C Operating RoHS Compliant Less than 1 pSec Jitter LVDS Frequency Range Frequency Stability* Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” Supply Voltage (Vdd) Supply Current LVPECL 70.000MHz to 800.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max Vdd – 1.620 VDC max Vdd- 1.025 vdc min 50 mA max PECL +2.5VDC ± 5% 1.43V typ 1.10V typ 50 mA max +3.3VDC ± 5% 60 mA max 60 mA max N/A +5.0VDC ± 5% N/A N/A 140 mA max Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Phase Jitter (12kHz to 20MHz) Vdd – 1.620 VDC max Vdd- 1.025 vdc min N/A (See Part Number Guide for Options) 2nSec max 50 Ohms into Vdd-2.00 VDC 10mSec max Less than 1 pSec Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) Tri-State Operation * Inclusive of Temp., Load, Voltage and Aging +2.5VDC +3.3VDC +5.0VDC Control Voltage (Vc) 1.25VDC ±1.00VDC 1.65VDC ±1.50VDC N/A Pullability Linearity Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 1.25VDC ±1.00VDC 1.65VDC ±1.50VDC N/A (See Part Number Guide for Options) (See Part Number Guide for Options) N/A N/A 2.50VDC ±2.00VDC Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code YYWW = L = Line 2 = SYYWWL 4 Numerical Digit Date Code (Year / Week) Jan 27 2011=1105 Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 10/29/10 D Pg 1 of 2 Part Number Guide Frequency MVL Output P = PECL L = LVPECL V = LVDS Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C 55 = -55°C to +125°C Symmetry * Blank = 40%/60% A = 45%/55% B = 47.5%/52.5% Pullability A = ±200 ppm min C = ±100 ppm min D = ±50 ppm min P = ±25 ppm min Linearity Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max *Option B (47.5/52.5%) Available up to 500MHZ only Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details 9.80 [.386] M AX 4.70 [.185] M AX MXXXXX SYYWWL XXXXX 0.84 [.033] 14.00 [.551] M AX 7.87 [.310] 5.08 [.200] 2.54 [.100] 3 4 2 5 1 6 5.08 [.200] 1.02 [.040] 2.54 [.100] 2.50 [.098] D EN O T ES P IN 1 D im ension in Brackets are in Inches External B ypass Capacitor is Recom m ended PIN PIN PIN PIN PIN PIN 1 2 3 4 5 6 PIN CO N NE CTIO N S V O LTA G E C O N T R O L EN ABLE/DISABLE G R O U ND O U TPU T CO M P. O U TPU T SUPPLY VO LTAG E R ecom m ended Land Pattern Tape & Reel Dimensions PITCH Tape Width REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 4.00 [.157] 12.00 [.471] 180 [7.0] 500 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 10/29/10 D Pg 2 of 2