MOGH & MOGZ Series 1”x .87” SMD OCXO Ultra High Stability SC Crystal Surface Mount Frequency Range 5.0MHz to 250.0MHz Frequency Stability vs Operating Temperature (See Part Number Guide for Options) Frequency Stability vs Supply Voltage ±1ppb 0.5 ppb/Day Frequency Stability vs Aging 0.1 ppm/Year Operating Temperature (See Part Number Guide for Options) All stabilities not available over wider temperature ranges, please consult MMD for availability. Storage Temperature -55°C to 90°C Sinewave Output +3dBm 50Ω min HCMOS Supply Voltage 10K Ohm 15pF 3.3V Warm-up Time Turn On 12.0V ≤3.2W Steady State Vcc=5 or 12V Vcc = 3.3V Control Voltage Slope Pull Range ≤1.0W 0 to 4.3V 0 to 2.8V Positive ±0.5ppm min, ±1ppm typ Phase Noise @ 10MHZ Frequency Output Voltage Reference Output 10 Hz Offset -125dBc 100 Hz Offset -143dBc 1 KHz Offset -150dBc 10KHz Offset -158dBc 100KHz Offset Vcc = 5 or 12V Vcc = 3.3V -160dBc 4.3V 2.8V Environmental Shock 5.0V 2 min to 0.1ppm accuracy MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Marking Detail Line 1 = MXXXXX M XXXXX Line 2 = SYYWWL S YYWW Solvent Resistance Vibration MIL-STD-202, Method 215 MIL-STD-883, Method 2007, Cond A = = MMD Frequency in MHZ = = Internal Code 4 Numerical Digit Date Code (Year / Week) Denotes RoHS Compliant L = Line 3 = XXXXX Internal use only May vary with lots Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 03/18/11 B Pg 1 of 2 Part Number Guide Frequency MOG 1"x .87" SMD 5 PIN Output H = HCMOS Z = Sinewave Supply Voltage 3 = + 3 VDC 5 = + 5 VDC 12 = +12 VDC Crystal Cut S = SC Cut Frequency Stability 005 = ±5PPB 010 = ±10PPB 020 = ±20PPB 050 = ±50PPB 100 = ±100PPB Operating Temperature A = 0°C to + 50°C B = -10°C to + 60°C C = -20°C to +70°C D = -30°C to +70°C F = -40°C to +85°C G = 0°C to +70°C Packaging Blank = Bulk T= Tape & Reel Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details 13.20 [.520] 25.40 [1.000] 23.50 [.925] 5 MXX.XXX SYYW W L XXXXX 1 8.89 [.350] 22.10 [.870] 2 R0.76 [R.030] 4 2.54 [.100] N O TES: 1 . A PPLIC A BLE STA N D A RD S/ SPE CI FIC A TIO N A N SI Y1 4 .5M-1 99 4 , D IM EN SIO N AN D T OL ER A N CE S. 2 . D IM EN SIO N IN BR A C KE TS A RE IN IN CH E S. 3 . PIN N U M B ERS AR E FO R REF ER EN C E O NL Y 4 . D O N OT SC A LE D R A W IN G 8.89 [.349] 17.78 [.700] 17.78 [.700] 3.50 [.138] 3 2.54 [.100] 4.00 [.157] PIN PIN PIN PIN PIN PIN CONNECTIONS 1 VOLTAGE CONTROL 2 VOLTAGE REF OUTPUT 3 SUPPLY VOLTAGE 4 OUTPUT 5 GROUND SUGGESTED LAND PATTERN EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 03/18/11 B Pg 2 of 2