MTKH, MTKL, & MTKV SERIES TCXO Industry Standard Package Wide Frequency Range HCMOS, LVDS, or LVPECL Output RoHS Compliant Available HCMOS 10.000MHZ to 200.000MHZ Frequency Range Frequency Stability Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” +2.5VDC ± 5% Supply Voltage (Vdd) Supply Current +3.3VDC ± 5% Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Tri-State Operation +2.5VDC +3.3VDC Control Voltage (Vc) Option LVPECL 75.000MHZ to 1.000GHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max 10% of Vdd max 1.43V typ Vdd – 1.620 VDC max 90% of Vdd min 1.10V typ Vdd- 1.025 vdc min 65mA max 50 mA max 50 mA max 65mA max 60 mA max 60 mA max (See Part Number Guide for Options) 2nSec max < 100.000MHZ / 1.5nSec ≥ 100.000MHZ 50 Ohms into 10kΩ // 15pF 100Ω Vdd-2.00 VDC 10mSec max Voh = 70% of Vdd min or No Connection to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) ±10 ppm with Vc = +1.25VDC ±1.00VDC, Positive Slope ±10 ppm with Vc = +1.65VDC ±1.50VDC, Positive Slope Mechanical Timmer Option ±3 ppm min Environmental & Mechanical Detail Shock LVDS MIL-STD-883, Method 2002, Condition B Marking Detail Line 1 = MXXXXX M = XXXXX = Line 2 = SYYWWL S = = YYWW MMD Frequency in MHZ Internal Code Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-883, Method 215 L MIL-STD-883, Method 2007, Condition A Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 Vibration = 4 Digit Date Code (Year / Week) Denotes RoHS Compliant MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 04/25/11 D Pg 1 of 2 Part Number Guide Frequency M TK Frequency Stability Output H =HCMOS L = LVPECL V = LVDS RoHS Compliant Blank = Not Compliant F = is Compliant Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC 10 15 20 25 30 50 = = = = = = ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±5.0 Operating Tem perature ppm ppm ppm ppm ppm ppm A = 0°C to + 50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Frequency Adjust Options Blank = No Connect B = Both V/C & Mech V = Voltage Control M = Mechanical Trimmer Sym metry Blank = 40% /60% A = 45% /55% Please Consult with MMD Sales Department for any other Parameters or Options Frequency Stability vs Temperature Table 10 Stability ±1.0ppm Temp 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available Code A G C D E F 15 ±1.5ppm ● 20 ±2.0ppm ● ● ● ● ● Tape & Reel Dimensions 25 30 ±2.5ppm ±3.0ppm ● ● ● ● ● ● ● ● ● ● ● ● Blank = Consult MMD 50 ±5.0ppm ● ● ● ● ● ● Mechanical Details PITCH 5.80 [.228] ±0.3 9.20 [.362] M AX MXXX.XX SYYWWL XXXXX Tape Width 3 2 1 14.80 [.582] M AX 4 5 6 1.20 [.047] O ptional Trim m er Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA PIN 1 ORIENT. REEL DIA 12.00 [.471] 24.00 [.945] 330 [13.0] Q1 DIRECTION OF FEED 1.40 [.055] ± 0.3 5.50 [.216] M AX 2.50 [.098] Pin Pin Pin Pin Pin Pin 1.50 [.059] 5.80 [.228] NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. SUG GESTED LAND PATTERN 1 2 3 4 5 6 Pin Connections N o Connection or Voltage Control Enable / Disable Case Ground O utput N o Connection Suppy Voltage (Vdd) DIM EN SIO N IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITO R IS RECO M M ENDED UN IT IS NO T H ERM ETICALLY SEALED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 04/25/11 D Pg 2 of 2