MTTAS Series – 5 X 3.2 Ceramic SMD VCTCXO Low Profile SMD Device Hermetically Sealed Tight Stability Over Temperature Low Power Consumption Frequency Range Frequency Stability vs Temperature * Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Output Type Output Level 8.000MHZ to 32.768MHZ (See Frequency Stability vs Temperature Table) (See Frequency Stability vs Temperature Table) -40°C to +85°C +2.50VDC +3.30VDC 2mA max Clipped Sinewave 0.8 Vp-p min Output Load 10k Ohms // 10pF Control Voltage Frequency Tunning Range Slope 1.25 ± 1.00VDC ±6.0ppm 1.5VDC ±1.0VDC ±8.0ppm Positive * Inclusive of Temperature., Load, Voltage and Aging Environmental & Mechanical Detail Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 215 MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A-2 Phase Noise Marking Detail Line 1 = MXXXXX M XXXXX Line 2 = SYYWWL S YYWW L = = MMD Frequency in MHZ = = Internal Code 4 Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 03/18/11 H Pg 1 of 2 Part Number Guide MTTA Frequency S 5 x 3.2 Ceramic SMD Frequency Stability 10 15 20 25 30 50 Supply Voltage Output S = Clipped Sinewave 2 = +2.5 VDC 3 = +3.3 VDC = = = = = = ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±5.0 Operating Temperature ppm ppm ppm ppm ppm ppm A = 0°C to + 50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Packaging Pin 1 Connection V = Voltage Control Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options Frequency Stability vs Temperature Table Code Stability Temp 10 ±1.0ppm 15 ±1.5ppm 20 ±2.0ppm 25 ±2.5ppm 30 ±3.0ppm 50 ±5.0ppm A 0°C TO +50°C ● ● ● ● ● ● G 0°C TO +70°C ● ● ● ● ● C -20°C TO +70°C ● ● ● ● D -30°C TO +70°C ● ● ● ● E -30°C TO +80°C ● ● ● ● F -40°C TO +85°C ● ● ● ● = Available = Consult with MMD Tape & Reel Dimensions Mechanical Details PITCH 5.20 [.205] MAX 1.70 [.067] MAX 2.90 [.114] 0.95 [.037] 0.60 [.024] TAPE WIDTH REEL DIA MXXXXX SYYWWL XXXXX 3.40 [.134] MAX 3 4 2 1 0.70 [.028] 1.60 [.063] 1.27 [.050] Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 12.00 [.472] 330[13 IN] 1000 Q1 PIN CONNECTIONS PIN 1 VOLTAGE CONTROL DIRECTION OF FEED NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. THESE 4 PADS ARE NOT TO BE CONNECTED TO ANY EXTERNAL SOURCES. DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMEND SUGGESTED LAND PATTERN PIN 2 PIN 3 PIN 4 CASE GROUND OUTPUT SUPPLY VOLTAGE MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 03/18/11 H Pg 2 of 2