D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG58, RG141, RG303 TECHNICAL DATA SHEET PE4824 D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG58, RG141, RG303 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style D-Sub Plug RG58,RG141,RG303 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Height, in [mm] 0.735 [18.67] 0.715 [18.16] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type D-Sub Plug Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG58, RG141, RG303 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG58, RG141, RG303 PE4824 URL: http://www.pasternack.com/d-sub-plug-standard-rg58-rg141-rg303-connector-pe4824-p.aspx PE4824 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4824 REV 01 INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. CRIMP FERRULE & SOLDER CAP IN PLACE. 2. 3. FERRULE: .213" HEX CRIMP TOOL CRIMP SIZE REQUIRED STRIP CABLE AS SHOWN. 1. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4824 DWG TITLE CAD FILE 061402 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG58, RG141, RG303 PE4824 CAD Drawing 2