D-Sub Receptacle Right Angle Contact Solder Attachment For RG180, RG195 TECHNICAL DATA SHEET PE4823 D-Sub Receptacle Right Angle Contact Solder Attachment For RG180, RG195 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style D-Sub Receptacle RG180,RG195 Solder/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Height, in [mm] 0.755 [19.18] 0.715 [18.16] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type D-Sub Receptacle Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level D-Sub Receptacle Right Angle Contact Solder Attachment For RG180, RG195 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: D-Sub Receptacle Right Angle Contact Solder Attachment For RG180, RG195 PE4823 URL: http://www.pasternack.com/d-sub-receptacle-standard-rg180-rg195-connector-pe4823-p.aspx PE4823 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4823 REV 01 STRIP CABLE AS SHOWN & SLIDE FERRULE OVER CABLE. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. SOLDER BRAID THROUGH HOLE IN FERRULE & SOLDER CAP IN PLACE. 1. 2. 3. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4823 DWG TITLE CAD FILE 061002 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. D-Sub Receptacle Right Angle Contact Solder Attachment For RG180, RG195 PE4823 CAD Drawing 2