SSMB Plug Right Angle Connector Crimp/ Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4335 SSMB Plug Right Angle Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SSMB Plug RG178,RG196 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.538 [13.67] 0.184 [4.67] 0.48 [12.19] Weight, lbs [g] 0.004 [1.81] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SSMB Plug Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level SSMB Plug Right Angle Connector Crimp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SSMB Plug Right Angle Connector Crimp/Solder Attachment For RG178, RG196 PE4335 URL: http://www.pasternack.com/ssmb-plug-standard-rg178-rg196-connector-pe4335-p.aspx PE4335 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4335 REV 01 FERRULE: .100" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. SLIDE FERRULE OVER BRAID & SEAT AGAINST BODY. CRIMP FERRULE. PRESS DOWN CAP. 2. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN. ASSEMBLY PROCEDURES REV. - CAD FILE 051402 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4335 DWG TITLE SSMB Plug Right Angle Connector Crimp/Solder Attachment For RG178, RG196 PE4335 CAD Drawing 2