MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4902 MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style MMCX Jack RG178,RG196 Crimp/Solder Straight Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Maximum Operating Voltage, Volts Dielectric Withstanding Voltage, Vrms DC to 3 50 1.22:1 170 500 Mechanical Specifications Temperature Operating Range, deg C -55 to +155 Size Length, in [mm] Width/Dia., in [mm] 0.46 [11.68] 0.135 [3] Weight, lbs [g] 0.002 [0.91] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type MMCX Jack Beryllium Copper, Gold 30µ in. minimum Brass, Gold 3µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 PE4902 PE4902 REV 1 MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4902 MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 PE4902 URL: http://www.pasternack.com/mmcx-jack-standard-rg178-rg196-connector-pe4902-p.aspx PE4902 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4902 REV FERRULE: .100" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. SOLDER CONTACT (2), TO CENTER CONDUCTOR REMOVE EXCESS SOLDER. SLIDE BODY OVER CONTACT AND INSERT (1). THEN CRIMP BODY (3). 2. SLIDE INSERT (1) OVER BRAID AND AGAINST THE JACKET, FORM BRAID OVER INSERT (1). TRIM BRAID BACK TO SHOULDER. CUT DIELECTRIC AND CENTER CONDUCTOR TO DIMENSION SHOWN. TIN CENTER CONDUCTOR. 1. STRIP CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. ASSEMBLY PROCEDURES REV. A FSCM NO. 53919 PE4902 DWG TITLE CAD FILE 021513-A SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. MMCX Jack Connector Crimp/Solder Attachment For RG178, RG196 PE4902 CAD Drawing 3