SF2160E • RF SAW Filter, 2330 MHz, 60 MHz BW • 3.0 x 3.0 x 1.4 mm Surface-mount Case • Complies with Directive 2002/95/EC (RoHS) 2330 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units +10 dBm Input Power DC Voltage on any Non-ground Terminal Operating Temperature Range 3 V -40 to +85 °C Component Storage Temperature Range -50 to +95 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC 2330 IL 2.4 Insertion Loss 2300 to 2360 MHz Notes Min Typ Max Units MHz 3.2 dB Amplitude Ripple: 2300 to 2360 MHz 1.1 2 2300 to 2320 MHz 0.3 1 2320 to 2340 MHz 0.6 1 2340 to 2360 MHz 0.5 1 Return Loss 2300 to 2360 MHz 9 9.5 dB dB Attenuation Referenced to 0 dB: DC to 2085 MHz 25 30 2097 to 2235 MHz 25 36 2235 to 2256 MHz 15 29 Case Style Lid Symbolization, Y=year, WW=week, S=shift, See note 4 dB SM3030-6 3 x 3 x 1.4 mm Surface-Mount 826 // YWWS Electrical Connections Connection Terminals Input 2 Output 5 Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. 5. 6. 7. 8. The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc., are registered trademarks of RF Monolithics, Inc. Page 1 of 6 SF2160E - 7/19/10 Testing Environment Frequency Response www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 6 SF2160E - 7/19/10 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 6 SF2160E - 7/19/10 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 4 of 6 SF2160E - 7/19/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 1 6 A 2 5 3 4 E D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 5 of 6 SF2160E - 7/19/10 Tape and Reel Specifications "B" REF. 100 REF. “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 3.35 mm 3.35 mm 1.40 mm 8.0 mm 12.0 mm Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF2160E - 7/19/10