SF2165E • SAW Filter for Digital Television • Complies with Directive 2002/95/EC (RoHS) Pb 1586.36 MHz SAW Filter Characteristics: Differential Source and Load Configuration Terminating Source/Load Impedance : ZS = 150 Ω Maximum Rating Value Units Input Power Level Rating 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range -50 to +95 °C Suitable for Lead-free Soldering - Maximum Soldering Profile SM3030-8 260°C for 30 s Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min 1586.36 Typ Max Insertion Loss, 1566.36 to 1606.36 MHz IL 1.8 4.5 Units MHz dB Amplitude Ripple, 1566.36 to 1606.36 MHz 1 1.0 2.0 dB Phase Error, 1566.36 to 1606.36 MHz 1 3.5 6.0 deg 1.5:1 2.5:1 Input/Output VSWR, 1566.36 to 1606.36 MHz 2 dB Bandwidth 40 59 50 to 1504.3 MHz 46 58 1668.42 to 1810.5 MHz 46 60 1810.5 to 4250 MHz 35 60 4250 to 6000 MHz 30 38 MHz Attenuation, Referenced to 0 dB Case Style dB SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity 861, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Port 1 Port 2 Connection Terminals Balanced Input Balanced Output Ground 1,2 5,6 All Others Dot Indicates Pin 1 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. Specification applies to any 30 MHz segment in the passband. 2. 3. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 5 SF2165E - 7/19/10 Filter S11, S22 and S21 Parameters Filter SWR and Passband Response www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 5 SF2165E - 7/19/10 Filter Broadband Response Filter Tuning Network www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 5 SF2165E - 7/19/10 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 2 8 7 1 6 6 2 5 5 3 7 861 YWWS A E C B 8 3 H G 4 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. F Page 4 of 5 SF2165E - 7/19/10 “B” "B" REF. 100 REF. Tape and Reel Specifications Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 12.0 13. 0 Carrier Tape Dimensions 20 3.35 mm Bo 3.35 mm Ko 1.4 mm Pitch 8.0 mm W 12.0 mm .2 2.0 Ao COMPONENT ORIENTATION and DIMENSIONS 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2165E - 7/19/10