SAM15F – SAM40F and SAM15FSMS – SAM40FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 1.5 Amp 1500 ─ 4000 VOLTS 150 nsec HIGH VOLTAGE RECTIFIER Part Number / Ordering Information 1/ SAM __ F __ __ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └ 2/ = None TX = TX Level TXV = TXV Level S = S Level └ Screening Package ___ = Axial Leaded SMS = Surface Mount Square Tab FEATURES: └ Recovery Time F = Fast Recovery └ Voltage 15 = 1500 20 = 2000 25 = 2500 30 = 3000 35 = 3500 40 = 4000 Fast Recovery: 150 nsec Maximum PIV to 4000 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available 2/ ELECTRICAL CHARACTERISTICS (at 25°C unless otherwise specified) Part Number Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Resistance Symbol PIV IO IR VF IFSM tRR CJ RθJL / RθJE Units V μA V A ns IF= .5 A IR= 1 A IRR= .25 A pF °C/W VR= 100 V fT= 1 MHZ RθJL: L=3/8” RθJE: L=0” 15 15 15 15 15 15 15 15 15 15 15 15 12 12 12 12 12 12 6 6 6 6 6 6 Conditions SAM15F SAM20F SAM25F SAM30F SAM35F SAM40F SAM15FSMS SAM20FSMS SAM25FSMS SAM30FSMS SAM35FSMS SAM40FSMS 1500 2000 2500 3000 3500 4000 1500 2000 2500 3000 3500 4000 A A 25°C 100°C @ PIV 25°C @ PIV 100°C @ IO 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.2 1.2 1.2 1.2 1.2 1.2 1.25 1.25 1.25 1.25 1.25 1.25 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 25 25 25 25 25 25 25 25 25 25 25 25 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. end tab temp. for soldering is 250°C for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 60 60 60 60 60 60 60 60 60 60 60 60 150 150 150 150 150 150 150 150 150 150 150 150 Axial DATA SHEET #: RV0023C SMS DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SAM15F – SAM40F and SAM15FSMS – SAM40FSMS PACKAGE OUTLINE: Axial DIMENSIONS DIM MIN MAX A --- .300” B --- .320” C .055” .063” D .400” --- PACKAGE OUTLINE: Surface Mount Square Tab DIMENSIONS DIM NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. MIN MAX A .195” .205” B .330” .410” C .020” .035” D .002” --- DATA SHEET #: RV0023C DOC