SDR047/01 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET Part Number / Ordering Information 0.5 AMP 5000 Volts 180 nsec 1/ SDR047/01__ L Screening Vf MATCHED HIGH VOLTAGE RECTIFIER PAIR 2/ = None TX = TX Level TXV = TXV Level S = S Level Features: • • • • • • • Matched diode Pair within 5% of Vf Fast Recovery: 180 nsec Max. PIV 5000 Volts Hermetically Sealed Metallurgically Bonded Construction 175°C Maximum Operating Temperature TX, TXV, and S-Level Screening Available2/ Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TC = 55ºC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to Reach Equilibrium Between Pulses, TC = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to Case Symbol Value Units VRRM VRWM VR 5000 Volts Io 500 mAmps IFSM 25 Amps Top & Tstg -65 to +175 ºC RθJC 18 ºC/W Notes: 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0041B Axial Leaded DOC SDR047/01 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Part Type Symbol Instantaneous Forward Voltage Drop (IF = 0.5Adc, TA = 25ºC, 300-500 µs pulse) Instantaneous Forward Voltage Drop (IF = 0.5Adc, TA = 25ºC, 300-500 µs pulse) Reverse Leakage Current (Rated VR, 300 µs pulse minimum) Junction Capacitance (VR = 100 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A, TA = 25ºC) TJ = 25ºC TJ = 100ºC Max Units VF1 13 Vdc ΔVF 5 % IR1 IR2 51.0 25 μA CJ 10 pF trr 180 nsec Case Outline: (Axial) DIMENSIONS D B D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. ØC ØA DIM A B C D DATA SHEET #: RC0041B MIN ----.047” .400” MAX .300” .425” .063” --- DOC