AKM AK4141EQ

[AKD4141-A]
AKD4141-A
Evaluation board Rev.2 for AK4141
GENERAL DESCRIPTION
The AKD4141 is an evaluation board for the AK4141, digital stereo decoder with stereo sample rate
converter, digital switches and sound processing functions.
The AKD4141 has the analog/digital audio interface and can achieve the interface with analog/digital
audio systems via BNC/RCA/OPT-connector.
„ Ordering guide
AKD4141-A
---
Evaluation board for AK4141
(Cable for connecting with printer port of IBM-AT,compatible PC and control software are
packed with this. This control software does not support Windows NT.)
FUNCTION
• DIT/DIR with optical input/output
• 10pin Header for digital audio I/F and serial control I/F
• BNC connector for an external clock input
9V, 5V, 3.3V, 1.8V
AK4114
(DIR)
Opt In
AGND, DGND
AK4114
(DIT)
9V Æ 5V
5V Æ 3.3V
3.3V Æ 1.8V
Opt Out
Regulator
COAX
COAX
EXT
10pin
Header
10pin
Header
AK4141
DSP
Data
Opt Out
DSP
Data
10pin
Header
Serial
Control
X’tal
LOUT1
SIF1
LIN1
ROUT1
AK4682
(CODEC)
SIF2
LOUT2
ROUT2
RIN1
Figure 1. AKD4141 Block Diagram
* Circuit diagram and PCB layout are attached at the end of this manual
<KM088102>
2007/11
-1-
[AKD4141-A]
Evaluation Board Manual
„ Operation sequence
1) Set up the power supply lines.
(1-1) In case of using the regulator.<Default>
[9V] (red)
[TVDD] (red)
[AVDD1] (red)
[AVDD2] (red)
[Logic] (red)
[DVDD] (red)
[AGND] (black)
[DGND] (black)
=
=
=
=
=
=
=
=
+9V
open
open
open
open
open
0V
0V
(for regulator and PVDD of AK4682)
(analog ground)
(digital ground)
(Note) TVDD, AVDD1, AVDD2 of AK4141 and Logic is supplied “3.3V” from regulator (T2).
DVDD of AK4141 is supplied “1.8V” from regulator (T3).
AVDD1, AVDD2, DVDD1 and DVDD2 of AK4682 is supplied “5V” from regulator (T1).
(1-2) In case of using the power supply connectors.
[9V] (red)
[TVDD] (red)
[AVDD1] (red)
[AVDD2] (red)
[Logic] (red)
[DVDD] (red)
[AGND] (black)
[DGND] (black)
=
=
=
=
=
=
=
=
+9V
+3.3V
+3.3V
+3.3 V
+3.3V
+1.8V
0V
0V
(for PVDD of AK4682)
(for TVDD of AK4682 and AK4141)
(for AVDD of AK4141)
(for AVDD2 of AK4141)
(for VDD of AK4114 (DIR, DIT) and logic)
(for DVDD of AK4141)
(analog ground)
(digital ground)
(Note) AVDD1, AVDD2, DVDD1 and DVDD2 of AK4682 is supplied “5V” from regulator (T1).
2) Set up the jumper pins and switches. (See the followings.)
3) Power on.
The AK4141, AK4682, AK4114 (DIR), AK4114 (DIT) should be reset once bringing toggle SW “L” upon
power-up. Please refer to Talble 1.on this page about setting of toggle SW.
„ Setting of the toggle SW
SW2
PDN_AK4141
SW3
PDN-CODEC
SW5
PDN-DIR
SW7
PDN-DIT
PDN SW of AK4141 (U2).
Keep “H” during normal operation.
PDN SW of AK4682 (U5).
Keep “H” during normal operation.
Keep “L” when AK4682 is not used.
PDN SW of AK4114 (U7).
Keep “H” during normal operation.
Keep “L” when AK4114 is not used.
PDN SW of AK4114 (U9).
Keep “H” during normal operation.
Keep “L” when AK4114 is not used.
Table 1. Setting of the toggle SW
<KM088102>
2007/11
-2-
[AKD4141-A]
„ Indication for LED
LED1
INT
LED2
INT0
Output of INT pin of the AK4141 (U2).
Turns on when PLL of the AK4141 (U2) is unlocked.
Output of INT0 pin of the AK4114 (U7).
Turns on when the AK4114 (U7) is unlocked.
Table 2. Indication for LED
„ Setting of jumper pins
No
21
Name
TVDD
23
AVDD1
24
AVDD2
26
Logic
22
DVDD
25
GND
20
M/S
CODEC
27
TXIN
28
RX
34
TX
2
EXT-T
132
MCKI
Setting
TVDD power supply
REG: TVDD is supplied from regulator (T2). “TVDD” connector should be open.<Default>
TM: TVDD is supplied from “TVDD” connector.
AVDD1 power supply
REG: AVDD1 is supplied from regulator (T2). “AVDD1” connector should be open.<Default>
TM: AVDD1 is supplied from “AVDD1” connector.
AVDD2 power supply
REG: AVDD2 is supplied from regulator (T2). “AVDD2” connector should be open.<Default>
TM: AVDD2 is supplied from “AVDD2” connector.
VDD (Logic) power supply
REG: VDD is supplied from regulator (T2). “Logic” connector should be open.<Default>
TM: VDD is supplied from “Logic” connector.
DVDD power supply
REG: DVDD is supplied from regulator (T3). “DVDD” connector should be open.<Default>
TM: DVDD is supplied from “DVDD” connector.
Analog GND and Digital GND
Open: Separated.
Short: Common. <Default>
Mode Setting of AK4682
Master: Master Mode.
Slave: Slave Mode. <Default>
Input of AK4141’s TXIN
OPT: OPT of PORT3 (RX).
GND: GND. <Default>
Input of AK4114 (DIR)’s RX
OPT: OPT of PORT3 (RX). <Default>
COAX: BNC of J10 (COAX).
Output of AK4114 (DIT)’s TX1
OPT: OPT of PORT5 (TX) <Default>
COAX: BNC of J11 (COAX)
Termination of J2 (External Clock)
Open: No termination. <Default>
Short: 51Ω.
Input of AK4141’s MCKI
DIR: IMCLK. <Default>
EXT: External clock from J11.
<KM088102>
2007/11
-3-
[AKD4141-A]
4
LRCK5
5
SCLK5
6
LRCK4
7
SCLK4
9
SDTI5
12
SDTI4
13
SDTI3
15
SDTI2
17
SDTI1
8
SDTO
14
SDTIA1
16
SDTIA2
32
IMCLK
31
ILRCK
29
IBICK1
Input of AK4141’s LRCK5
OLRCK: OLRCK.
ILRCK: ILRCK. <Default>
Input of AK4141’s SCLK5
OBICK: OBICK.
IBICK: IBICK. <Default>
Input of AK4141’s LRCK4
OLRCK: OLRCK.
ILRCK: ILRCK. <Default>
Input of AK4141’s SCLK4
OBICK: OBICK
IBICK: IBICK <Default>
Input of AK4141’s SDTI5
DIR: SDTO of DIR (U7) <Default>
ADC: SDTOB of AK4682 (U5).
GND: GND.
Input of AK4141’s SDTI4
DIR: SDTI of DIR (U7) <Default>
ADC: SDTOB of AK4682 (U5).
GND: GND.
Input of AK4141’s SDTI3
DIR: SDTI of DIR (U7) <Default>
ADC: SDTOB of AK4682 (U5).
GND: GND.
Input of AK4141’s SDTI2
DIR: SDTI of DIR (U7) <Default>
ADC: SDTOB of AK4682 (U5).
GND: GND.
Input of AK4141’s SDTI2
DIR: SDTI of DIR (U7) <Default>
ADC: SDTOB of AK4682 (U5).
GND: GND.
Input of DIT (U9)’s DAUX
SDTO1: Output of AK4141’s SDTO1 <Default>
SDTO2: Output of AK4141’s SDTO2
SDTO3: Output of AK4141’s SDTO3
Input of AK4682 (U5)’s SDTIA1
SDTO1: Output of AK4141’s SDTO1 <Default>
SDTO2: Output of AK4141’s SDTO2
SDTO3: Output of AK4141’s SDTO3
Input of AK4682 (U5)’s SDTIA2
SDTO1: Output of AK4141’s SDTO1 <Default>
SDTO2: Output of AK4141’s SDTO2
SDTO3: Output of AK4141’s SDTO3
IMCLK and DIR (U7)’s MCKO1
Open: Separated.
Short: Connected. <Default>
ILRCK and DIR (U7)’s LRCK
Open: Separated.
Short: Connected. <Default>
IBICK and DIR (U7)’s BICK
Open: Separated.
Short: Connected. <Default>
<KM088102>
2007/11
-4-
[AKD4141-A]
30
SDTI
33
IBICK2
39
ILRCK
38
OLRCK
37
IBICK
36
OBICK1
35
SDTO
41
OBICK2
SDTI and DIR (U7)’s SDTO
Open: Separated.
Short: Connected. <Default>
Polarity of IBICK
THR: Through. <Default>
INV: Invert.
ILRCK and DIT (U9)’s LRCK
Open: Separated. <Default>
Short: Connected.
OLRCK and DIT (U9)’s LRCK
Open: Separated. <Default>
Short: Connected.
IBICK and DIT (U9)’s BICK
Open: Separated. <Default>
Short: Connected.
OBICK and DIT (U9)’s BICK
Open: Separated. <Default>
Short: Connected.
SDTO and DIT (U9)’s DAUX
Open: Separated. <Default>
Short: Connected.
Polarity of OBICK
THR: Through. <Default>
INV: Invert.
Table 3. Setting of jumper pins
<KM088102>
2007/11
-5-
[AKD4141-A]
„ Evaluation mode
The setup sequence from the initial state
The AKD4141 can evaluate various mode using AK4682 (CODEC), AK4114 (DIR) and AK4114 (DIT).
Set jumper pins and SW to condition to evaluate. About AK4141 and AK4682, refer to each
datasheet. About DIR and DIT, refer to Table 5.~ Table 10. in this manual.
Follows are setting examples of AK4141’s decoder.
Measurement path :
٠SIF (J1) → AK4141 (Stereo decoder) → DAC (AK4682) → LOUT1/ROUT1
٠SIF (J1) → AK4141 (Stereo decoder) → DIT (AK4141) → TX (PORT1)
Setting of AK4141 :
Using X’tal Oscillator, Master mode MCLK=256fjs, fs=48kHz.
(1) Setting of MCLK. X’tal Oscillator (X1) is used.
12.288MHz (fs=48kHz, MCLK=256fs) is equipped on the board by initial setting.
When evaluate it in other conditions, please attach a X’tal oscillator according to evaluation mode.
(2) Setting of DIP SW1.
(2-1) Setting of Master Mode
Please set MSN (No.6) of DIP SW1 to “H”. (Master Mode : MCKI=256fs)
(2-2) Setting of SIF input. Please set 6M5 pin and 4M5[2-0] pin according to carrier frequency.
(2-2-1) In case of including the 6.5MHz carrier.
6M5 (No.5) of DIP SW1 = “L” : L NICAM.
6M5 (No.5) of DIP SW1 = “H” : D/K
(2-2-2) In case of including the 4.5MHz carrier.
4M5[2-0] (No.4-2) of DIP SW1 = “LHL” : EIAJ.
4M5[2-0] (No.4-2) of DIP SW1 = “LLH” : M-Korea.
4M5[2-0] (No.4-2) of DIP SW1 = “LLL” : PAL (Chroma Carrier)
4M5[2-0] (No.4-2) of DIP SW1 = “HLL” : FM-Stereo Radio EU
4M5[2-0] (No.4-2) of DIP SW1 = “HHH” : FM-Stereo Radio US
(Note.) The details please refer to Table 4. in this manual.
(3) Setting of the jumper pins. Jumper pins should be set as follows.
Please set JP14 and JP16 according to the output of AK4141.
The following are setting examples of JP14=SDTO1 and JP16=SDTO2.
JP10
LRCK
ILRCK OLRCK
JP11
SCLK
IBICK
OBICK
Master Slave
JP16
SDTIA2
JP14
SDTIA1
JP20
M/S CODEC
SDTO1
SDTO2
SDTO3
SDTO1
SDTO2
SDTO3
(4) Please set toggle SW2 (AK4141) to “H”.
(5) Please write register of AK4141 with control software.
The following is register setting from the initial state of AK4141.
01H : MCKE bit & MCKD bit “0” → “1” (MCKO output for AK4682 : MCKO=256fs)
(6) Please supply SIF signal from J1 (SIF1).
(7) Please write register of AK4141 with control software.
41H : ASD bit = “0” → “1”. (Automatic system detection ON)
<KM088102>
2007/11
-6-
[AKD4141-A]
(8) Please set toggle SW3 (CODEC) to “H”.
(9) Please write register of AK4682 with control software.
The following is register setting from the initial state of AK4682.
1. 02H : DIFA[1-0] bit “11” → “10” (Audio interface format : Left justified)
(Note) In case of AK4141 evaluation using AK4682, it is necessary to correspond to audio interface format
for AK4141 and AK4682. Audio interface format of AK4141’s initial state is Left justified.
<KM088102>
2007/11
-7-
[AKD4141-A]
„ Setting of DIP SW
(1). Setting of SW1 (AK4141)
SW1
No.
1
Name
ON (“H”)
IIS
2
3
4
4M50
4M51
4M52
5
6M5
6
MSN
7
8
CAD0
CAD1
OFF (“L”)
Default
Audio Data Format Select Pin. ORed with ODIF bit, ORed with IDIF0 bit.
“L”: 24 bit Left Justified if IDIF0 bit = “0” (default).
“H”: 24/16 bit IIS.
Decoder Standard Preference Control 0 for 4.5MHz carrier.
4M5 [2:0] pin
“LLL”: PAL (Chroma Carrier)
“LLH”: M-Korea
“LHL”: EIAJ
“LHH”: Reserved
“HLL”: FM-Stereo Radio EU
“HLH”: FM-Stereo Radio EU
“HHL”: FM-Stereo Radio EU
“HHH”: FM-Stereo Radio US
This Pin is internally XORed with 4M5[2-0] bit (default = “011”).
Decoder Standard Preference Control for 6.5MHz carrier.
“L”: SECAM L NICAM
“H”: D/K1, D/K2, D/K3 or D/K NICAM
This Pin is internally XORed with 6M5 bit (default = “0”).
Master Mode Select Pin. ORed with CKS [1:0] bits.
“L”: Slave mode if CKS [2:0] bits = “000” (default).
“H”: Master mode of MCLK=256fs if CKS2 bit = “0” (default).
Chip Address 0 pin. Should match CAD0 bit in IIC first byte.
Chip Address 1 pin. Should match CAD1 bit in IIC first byte.
Table 4. SW1 Setting
L
L
L
L
L
L
L
L
(2). Setting of SW4 (DIR: AK4114)
SW4
Name
ON (“H”)
OFF (“L”)
Default
No.
1
DIF2
H
AK4114 Output Audio Interface Format Setting
2
DIF1
L
refer to Table 6.
3
DIF0
L
4
CM1
L
AK4114 Clock Mode Setting
Fixed to “L”.
5
CM0
L
6
OCKS1
H
AK4114 Master Clock Frequency Setting
refer to Table 7
7
OCKS0
L
Table 5. SW4 Setting
Mode
0
1
2
3
4
5
6
7
DIF2
pin
L
L
L
L
H
H
H
H
DIF1
pin
L
L
H
H
L
L
H
H
DIF0
LRCK
BICK
SDTO Format
pin
I/O
L
16bit, Right justified
H/L
O
64fs
H
18bit, Right justified
H/L
O
64fs
L
20bit, Right justified
H/L
O
64fs
H
24bit, Right justified
H/L
O
64fs
L
24bit, Left justified
H/L
O
64fs
H
24bit, I2S Compatible L/H
O
64fs
L
24bit, Left justified
H/L
I
64-128fs
H
24bit, I2S Compatible L/H
I
64-128fs
Table 6. AK4114 Output Audio Interface Format Setting
<KM088102>
I/O
O
O
O
O
O
O
I
I
(Default)
2007/11
-8-
[AKD4141-A]
OCKS1 OCKS0 MCKO1
fs (max)
pin
pin
0
L
L
256fs
96 kHz
1
L
H
256fs
96 kHz
2
H
L
512fs
48 kHz
3
H
H
128fs
192 kHz
Table 7. AK4114 Master Clock Frequency Setting
Mode
(Default)
(3). Setting of SW6 (DIT: AK4114)
SW6
Name
ON (“H”)
OFF (“L”)
Default
No.
1
DIF2
H
AK4114 Input Audio Interface Format Setting
2
DIF1
L
refer to Table 9.
3
DIF0
L
4
CM1
AK4114 Clock Mode Setting Fixed to “L”.
L
5
CM0
AK4114 Clock Mode Setting Fixed to “H”.
H
6
OCKS1
L
AK4114 Master Clock Frequency Setting
refer to Table 10.
7
OCKS0
L
Table 8. SW6 Setting
Mode
0
1
2
3
4
5
6
7
DIF2
pin
L
L
L
L
H
H
H
H
DIF1
pin
L
L
H
H
L
L
H
H
DIF0
LRCK
BICK
DAUX Format
pin
I/O
L
24bit, Left justified
H/L
O
64fs
H
24bit, Left justified
H/L
O
64fs
L
24bit, Left justified
H/L
O
64fs
H
24bit, Left justified
H/L
O
64fs
L
24bit, Left justified
H/L
O
64fs
H
24bit, I2S Compatible L/H
O
64fs
L
24bit, Left justified
H/L
I
64-128fs
H
24bit, I2S Compatible L/H
I
64-128fs
Table 9. AK4114 Input Audio Interface Format Setting
I/O
O
O
O
O
O
O
I
I
(Default)
OCKS1 OCKS0 MCKO1 fs (max)
pin
pin
0
L
L
256fs
96 kHz
(Default)
1
L
H
256fs
96 kHz
2
H
L
512fs
48 kHz
3
H
H
128fs
192 kHz
Table 10. AK4114 Master Clock Frequency Setting
Mode
<KM088102>
2007/11
-9-
[AKD4141-A]
„ Serial Control
GND
GND
GND
10
GND
PORT2
uP I/F
GND
The AK4141 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT2
(CTRL) with PC by 10 wire flat cable packed with the AKD4141.
6
CCLK
CSN
CDTI
CDTO
1
NC
Red
5
Figure 2. Connect of 10 wire flat cable
<KM088102>
2007/11
- 10 -
[AKD4141-A]
Control Software Manual
„ Set-up of evaluation board and control software
1. Set up the AKD4141-A according to previous term.
2. Connect IBM-AT compatible PC with AKD4141-A by 10-line type flat cable (packed with AKD4141-A).
Take care of the direction of 10pin header. (Please install the driver in the CD-ROM when this control software
is used on Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device
control software”. In case of Windows95/98/ME, this installation is not needed. This control software does not
operate on Windows NT.)
3. Insert the CD-ROM labeled “AK4141-A Evaluation Kit” into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of “akd4141.exe” and “akd4682 .exe” to set up the
control program.
5. Then please evaluate according to the follows.
„ Operation flow
Keep the following flow.
1. Set up the control program according to explanation above.
2. Click “Port Reset” button.
3. Click “Write default” button
„ Explanation of each buttons
[Port Reset] :
[Write default] :
[All Write] :
[All Read] :
[Function1] :
[Function2] :
[Function3] :
[Function4] :
[Function5]:
[SAVE] :
[OPEN] :
[Write] :
[Read]:
Set up the USB interface board (AKDUSBIF-A) .
Initialize the register of AK4141.
Write all registers that is currently displayed.
Read all registers of the AK4141.
Dialog to write data by keyboard operation.
Dialog to write data by keyboard operation.
The sequence of register setting can be set and executed.
The sequence that is created on [Function3] can be assigned to buttons and executed.
The register setting that is created by [SAVE] function on main window can be assigned to
buttons and executed.
Save the current register setting.
Write the saved values to all register.
Dialog to write data by mouse operation.
Dialog to read data by mouse operation.
„ Indication of data
Input data is indicated on the register map. Red letter indicates “H” or “1” and blue one indicates “L” or “0”.
Blank is the part that is not defined in the datasheet.
<KM088102>
2007/11
- 11 -
[AKD4141-A]
„ Explanation of each dialog
1. [Write Dialog] : Dialog to write data by mouse operation
There are dialogs corresponding to each register.
Click the [Write] button corresponding to each register to set up the dialog. If you check the check box, data
becomes “H” or “1”. If not, “L” or “0”.
If you want to write the input data to AK4141, click [OK] button. If not, click [Cancel] button.
2. [Function1 Dialog] : Dialog to write data by keyboard operation
Address Box:
Data Box:
Input registers address in 2 figures of hexadecimal.
Input registers data in 2 figures of hexadecimal.
If you want to write the input data to AK4141, click [OK] button. If not, click [Cancel] button.
3. [Function2 Dialog] : Dialog to evaluate VOL
Address Box:
Input registers address in 2 figures of hexadecimal.
Start Data Box:
Input starts data in 2 figures of hexadecimal.
End Data Box:
Input end data in 2 figures of hexadecimal.
Interval Box:
Data is written to AK4141 by this interval.
Step Box:
Data changes by this step.
Mode Select Box:
If you check this check box, data reaches end data, and returns to start data.
[Example] Start Data = 00, End Data = 09
Data flow: 00 01 02 03 04 05 06 07 08 09 09 08 07 06 05 04 03 02 01 00
If you do not check this check box, data reaches end data, but does not return to start data.
[Example] Start Data = 00, End Data = 09
Data flow: 00 01 02 03 04 05 06 07 08 09
If you want to write the input data to AK4141, click [OK] button. If not, click [Cancel] button.
<KM088102>
2007/11
- 12 -
[AKD4141-A]
4. [Save] and [Open]
4-1. [Save]
Save the current register setting data. The extension of file name is “akr”.
<Operation flow>
(1) Click [Save] Button.
(2) Set the file name and push [Save] Button. The extension of file name is “akr”.
4-2. [Open]
The register setting data saved by [Save] is written to AK4141. The file type is the same as [Save].
<Operation flow>
(1) Click [Open] Button.
(2) Select the file (*.akr) and Click [Open] Button.
<KM088102>
2007/11
- 13 -
[AKD4141-A]
5. [Function3 Dialog]
The sequence of register setting can be set and executed.
(1) Click [F3] Button.
(2) Set the control sequence.
Set the address, Data and Interval time. Set “-1” to the address of the step where the sequence should be
paused.
(3) Click [Start] button. Then this sequence is executed.
The sequence is paused at the step of Interval="-1". Click [START] button, the sequence restarts from the paused
step.
This sequence can be saved and opened by [Save] and [Open] button on the Function3 window. The extension of
file name is “aks”.
Figure 3. Window of [F3]
<KM088102>
2007/11
- 14 -
[AKD4141-A]
6. [Function4 Dialog]
The sequence that is created on [Function3] can be assigned to buttons and executed. When [F4] button is clicked,
the window as shown in Figure 4. opens.
Figure 4. [F4] window
<KM088102>
2007/11
- 15 -
[AKD4141-A]
6-1. [OPEN] buttons on left side and [START] buttons
(1) Click [OPEN] button and select the sequence file (*.aks).
The sequence file name is displayed as shown in Figure 5.
Figure 5. [F4] window (2)
(2) Click [START] button, then the sequence is executed.
6-2. [SAVE] and [OPEN] buttons on right side
[SAVE] : The sequence file names can assign be saved. The file name is *.ak4.
[OPEN] : The sequence file names assign that are saved in *.ak4 are loaded.
6-3. Note
(1) This function doesn't support the pause function of sequence function.
(2) All files need to be in same folder used by [SAVE] and [OPEN] function on right side.
(3) When the sequence is changed in [Function3], the file should be loaded again in order to reflect the change.
<KM088102>
2007/11
- 16 -
[AKD4141-A]
7. [Function5 Dialog]
The register setting that is created by [SAVE] function on main window can be assigned to buttons and executed.
When [F5] button is clicked, the following window as shown in Figure 6.opens.
Figure 6. [F5] window
7-1. [OPEN] buttons on left side and [WRITE] button
(1) Click [OPEN] button and select the register setting file (*.akr).
The register setting file name is displayed as shown in Figure 7.
(2) Click [WRITE] button, then the register setting is executed.
<KM088102>
2007/11
- 17 -
[AKD4141-A]
Figure 7. [F5] windows(2)
7-2. [SAVE] and [OPEN] buttons on right side
[SAVE] : The register setting file names assign can be saved. The file name is *.ak5.
[OPEN] : The register setting file names assign that are saved in *.ak5 are loaded.
7-3. Note
(1) All files need to be in same folder used by [SAVE] and [OPEN] function on right side.
(2) When the register setting is changed by [Save] Button in main window, the file should be loaded again in
order to reflect the change.
<KM088102>
2007/11
- 18 -
[AKD4141-A]
MEASUREMENT RESULTS
[Measurement condition]
• Measurement unit
• fs
• Power Supply
• Temperature
: Audio Precision, System Two Cascade
ROHDE & SCHWARZ, TV TEST TRANSMITTER SFM
: 48kHz
: AVDD = TVDD = 3.3V, DVDD = 1.8V
: Room
[Measurement Results]
FM Characteristics ( BG A2)
Result (Lch / Rch)
Unit
S / (N+D)
0dB Input
63.2 / 68.4
dB
S/N
No Signal, A-weighting
69.5 / 73.4
dB
Result (Lch / Rch)
Unit
NICAM Characteristics ( BG NICAM)
S / (N+D)
0dB Input
67.4 / 67.3
dB
Dynamic Range
-60dB Input, A-weighting
79.0 / 78.8
dB
Result (Mono)
Unit
AM Characteristics ( L )
S / (N+D)
0dB Input
40.1
dB
S/N
No Signal, A-weighting
72.2
dB
<KM088102>
2007/11
- 19 -
[AKD4141-A]
[Plots]
FM : BG A2
AKM
BG A2
FFT (0dBr)
+0
-20
-40
-60
d
B
r
-80
-100
1
-120
-140
-160
-180
20
50
100
200
500
1k
2k
5k
10k
20k
Hz
Figure 8. FFT (0dB Input)
AKM
BG A2
FFT (No Signal)
+0
-20
-40
-60
d
B
r
-80
-100
1
-120
-140
-160
-180
20
50
100
200
500
1k
2k
5k
10k
20k
Hz
Figure 9. FFT (No Signal)
<KM088102>
2007/11
- 20 -
[AKD4141-A]
NICAM : BG NICAM
AKM
NICAM
FFT (0dBr)
+0
-20
-40
-60
d
B
r
-80
-100
1
-120
-140
-160
-180
20
50
100
200
500
1k
2k
5k
10k
20k
2k
5k
10k
20k
Hz
Figure 10. FFT (0dB Input)
AKM
NICAM
FFT (-60dBr)
+0
-20
-40
-60
d
B
r
-80
-100
1
-120
-140
-160
-180
20
50
100
200
500
1k
Hz
Figure 11. FFT (-60dB Input)
<KM088102>
2007/11
- 21 -
[AKD4141-A]
AM : L
AKM
AM Mono
FFT (0dBr)
+0
-20
-40
-60
d
B
r
-80
-100
1
-120
-140
-160
-180
20
50
100
200
500
1k
2k
5k
10k
20k
2k
5k
10k
20k
Hz
Figure 12. FFT (0dB Input)
AKM
AM Mono
FFT (No Signal)
+0
-20
-40
-60
d
B
r
-80
-100
1
-120
-140
-160
-180
20
50
100
200
500
1k
Hz
Figure 13. FFT (No Signal)
<KM088102>
2007/11
- 22 -
[AKD4141-A]
Revision History
Date
(yy/mm/dd)
07/05/30
Manual
Board
Revision
Revision
KM088100
0
Reason
Page
Contents
First Edition
07/06/26
KM088101
1
Change
07/11/13
KM088102
2
Change
Change
Addition
24
Circuit diagram was changed.
C12: 0.1uF → 1uF
Device revision was changed.
Rev.A → Rev.B
24
Circuit diagram was changed.
C14: 47nF → 4.7nF
19-22 Table data and plot data were added.
IMPORTANT NOTICE
z These products and their specifications are subject to change without notice.
When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei
EMD Corporation (AKEMD) or authorized distributors as to current status of the products.
z AKEMD assumes no liability for infringement of any patent, intellectual property, or other rights in the application
or use of any information contained herein.
z Any export of these products, or devices or systems containing them, may require an export license or other official
approval under the law and regulations of the country of export pertaining to customs and tariffs, currency exchange,
or strategic materials.
z AKEMD products are neither intended nor authorized for use as critical componentsNote1) in any safety, life support,
or other hazard related device or systemNote2), and AKEMD assumes no responsibility for such use, except for the
use approved with the express written consent by Representative Director of AKEMD. As used here:
Note1) A critical component is one whose failure to function or perform may reasonably be expected to result,
whether directly or indirectly, in the loss of the safety or effectiveness of the device or system containing it, and
which must therefore meet very high standards of performance and reliability.
Note2) A hazard related device or system is one designed or intended for life support or maintenance of safety
or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to function or
perform may reasonably be expected to result in loss of life or in significant injury or damage to person or
property.
z It is the responsibility of the buyer or distributor of AKEMD products, who distributes, disposes of, or otherwise
places the product with a third party, to notify such third party in advance of the above content and conditions, and
the buyer or distributor agrees to assume any and all responsibility and liability for and hold AKEMD harmless
from any and all claims arising from the use of said product in the absence of such notification.
<KM088102>
2007/11
- 23 -
A
SIF1
J1
BNC-R-PC
B
C
C1
10n
D
E
AK4141-AVDD1
R1
(Open)
AK4141-AVDD2
AGND
AGND
CN1
49
50
51
52
53
54
55
56
57
58
59
A
64pin_4
60
C2
10n
61
J3
BNC-R-PC
62
SIF2
63
A
AGND
AGND
64
AGND
R3
(Open)
C3
AGND
SW1
DSS108
9
8
7
6
5
4
3
2
1
IIS
4M50
4M51
4M52
6M5
MSN
CAD0
CAD1
1
2
3
4
5
6
7
8
10u
C6
C8
22p
C7
0.1u
VDD
10u
X1 22p
2
16
15
14
13
12
11
10
9
C5
AGND
+
RP1
M9-1-473
47K
AGNDC4
AGNDAGND
+
AGND
C9
C10
1
HC-49/U
12.288MHz
0.1u
C11
C12
0.1u
0.1u
0.1u
1u
CN2
64pin_1
CN3
64pin_3
MODE-AK4141
3
VREFH
37
38
VREFL
AVSS1
SIF2
39
40
41
SIF1
VCOM
42
43
AVSS1
44
46
47
45
XTI
AVDD1
C13
XTO
2
AVSS2
47
B
C14
1
FILT2
FILT1
36
2
IIS
CAD1
35
46
OLRCK
OLRCK
ILRCK
ILRCK
OBICK
OBICK
IBICK
IBICK
45
CAD1
JP4 HIF3G-50P-2.54DSA (3x1)
LRCK5
5
R4
51
3
LRCK5
CAD0
34
44
CAD0
JP5 HIF3G-50P-2.54DSA (3x1)
SCLK5
6
R5
51
4
SCLK5
MSN
33
43
MSN
7
R6
51
5
SDTI5
6M5
32
42
6M5
JP6 HIF3G-50P-2.54DSA (3x1)
LRCK4
8
R8
51
6
LRCK4
INT
31
JP7 HIF3G-50P-2.54DSA (3x1)
SCLK4
9
R9
51
7
SCLK4
SDTO1
30
R10
51
40
10
R11
51
8
SDTI4
SDTO2
29
R12
51
39
ILRCK
OBICK
IBICK
11
R13
51
9
SDTI3
SDTO3
28
R14
51
38
12
R15
51
10
SDTI2
LRCK
27
R16
JP9
HIF3G-50P-2.54DSA (3x2) SDTI5
DIR
ADC
GND
SDTI
AK4682-SDTOB
U1B
3
74AC14
OLRCK
C
4.7n
4
14
0.68u
IIS
AK4141
R7
4
R17
13
51
11
SDTI1
SCLK
26
4M50
MCKO
25
JP15
HIF3G-50P-2.54DSA (3x2) SDTI2
DIR
ADC
GND
51
37
R18
51
36
R19
51
35
TXOUT
34
24
SDA
4M52
23
22
TVDD
21
20
19
TVSS
DVSS
DVDD
TXIN
18
17
MCKI
PDN
16
13
SDTI3
SCL
15
15
12
14
14
4M50
4M51
JP13
HIF3G-50P-2.54DSA (3x2) SDTI3
DIR
ADC
GND
16
33
JP8
HIF3G-50P-2.54DSA (3x2)
SDTO1
SDTO2
SDTO3
SDTO
SDTO
JP17
HIF3G-50P-2.54DSA (3x2) SDTI1
DIR
ADC
GND
C15
AK4682-SDTIA1
SDTIA1
AK4682-SDTIA2
SDTO1
32
31
30
29
28
SDTO2
27
AGND 10u
25
24
23
C18
26
+
1
3
SDTO3
U3A
10k
470
74LS07
4
PORT2
A1-10PA-2.54DSA
6
7
8
9
10
C20
0.1u
PDN-AK4141
DGND
5
4
3
2
1
up-I/F
R28
U3B
10k
470
74LS07
3
R30
AK4141-TVDD
C19
0.1u
IN
VCC
1
GND
4141TX(OPT)
DGND
10k
VDD
R29
E
AK4682-SDA
(short)
SDA(ACK)
51
Title
Size
DGND
A2
Date:
A
3
2
AK4682-SCL
R26
4
VDD
100
R24
14
R27
SCL
SDA
SDA(ACK)
10k
2
7
1
PORT1
TOTX141
VDD
4M52
R23
7
3
74HC14
2
SW2
ATE1D-2M3
U4B
2
7
1
74HC14
R22
14
U4A
H
7
14
2
1
R25
10k
14
R21
VDD
L
10u
AK4141-DVDD
AK4141-TXIN
DGND
VDD
E
AGND
AGND AGND
JP2
HIF3G-50P-2.54DSA (2x1)
D1
HSU119
JP14
HIF3G-50P-2.54DSA (3x2)
SDTO1
SDTO2
SDTO3
64pin_2
4M51
DGND
EXT-T
IBICK
AK4141-MCKO
0.1u
C17
22
21
20
19
CN4
18
JP132
HIF3G-50P-2.54DSA (3x1)
MCKI
17
14
EXT
OBICK
IBICK
7
74AC14
R2
51
2
ILRCK
OBICK
+
1
OLRCK
ILRCK
SDTIA2
C16
0.1u
IMCLK
EXT
HIF3G-50P-2.54DSA (3x1) JP11
SCLK
OLRCK
D
R20
100
SDTI1
DIR
HIF3G-50P-2.54DSA (3x1) JP10
LRCK
JP16
HIF3G-50P-2.54DSA (3x2)
SDTO1
SDTO2
SDTO3
SDTI2
U1A
VDD
41
SDTI4
J2
BNC-R-PC
1
C
JP12
HIF3G-50P-2.54DSA (3x2)SDTI4
DIR
ADC
GND
AGND
LED1
SML-210LT
2
INT
SDTI5
D
1k
7
B
48
U2
48
1
IIS
4M50
4M51
4M52
6M5
MSN
CAD0
CAD1
AVDD2
DGND
B
C
-24-
D
AKD4141-A
Document Number
Rev
AK4141 Stereo Decoder
Monday, June 18, 2007
E
Sheet
1
2
of
5
B
C
D
E
AK4682-DVDD1
A
A
A
+
C21 10u
1
AK4141-MCKO
LIN3
38
RIN3
37
39
NC
41
40
LIN4
RIN4
42
NC
RIN5
LIN5
45
44
46
NC
LIN6
RIN6
AGND
DVSS1
RIN2
36
LIN2
35
AGND
(short)
2
MCLKB
3
TVDD
NC
34
4
LRCKB
RIN1
33
(short)
5
BICKB
LIN1
32
(short)
6
SDTOB
AVDD1
31
AK4682-TVDD
C23
10u
+
R32
AGND
(short)
R34
R35
C24
0.1u
AGND
R33
(Short)
B
J4
RIN1
C25
+
R31
47
48
DVDD1
U5
AGND
43
AGND
C22 0.1u
2
3
1
2.2u
B
MR-552LS
AGND
(short)
8
R38
(short)
9
AK4141-MCKO
R39
(short)
10
AK4682-SDTIA1
R40
(short)
11
AK4682-SDTIA2
R42
(short)
12
30
VCOM3
29
VCOM36
28
MCLKA
AVSS2
27
SDTIA1
AVDD2
26
SDTIA2
ROUT3
25
BICKA
C29
0.1u
C31
0.1u
C30
10u
C32
10u
C33
0.1u
C34
10u
2.2u
AGND
MR-552LS
AGND
AK4682-AVDD2
C35
22u
LOUT3
PVSS
23
C39
22u
+
C44
22u
Slave
+
+
M/S CODEC
ROUT1
MR-552LS
AGND
R47
220
(short)
R51
10k
AGND
J8
AGND
MR-552LS
AGND
R49
220
J9
ROUT2
2
3
1
+ C47
4.7n
AGND
LOUT2
2
3
1
+ C45
4.7n
R48
10k
C46
22u
R50
J7
AGND
C
2
3
1
+ C42
4.7n
AGND
JP20 HIF3G-50P-2.54DSA (3x1)
MR-552LS
AGND
R44
220
AGND
LOUT1
AGND
AK4682-DVDD2
Master
AGND
R46
10k
DGND
D
J6
2
3
1
+ C36
4.7n
AGND
+
2
PDN-CODEC
R41
220
R43
10k
C41
10u
AGND
AK4682-PVDD
C43
0.1u
SW3
ATE1D-2M3
+
C40
10u
8
AK4682-SCL
9
74HC14
AK4682-SDA
U4D
6
7
74HC14
1
3
H
14
U4C
5
L
7
14
1
D2
HSU119
C38
0.1u
AK4682-DVDD2
2
R45
10k
C37
0.1u
2
3
1
AGND
24
PVDD
22
LOUT2
ROUT2
21
20
MSB
19
ROUT1
LOUT1
17
18
DVSS2
16
SCL
DVDD2
15
VDD
14
13
SDA
C
J5
LIN1
C28
+
R36
(Short)
+
OBICK
LRCKA
AVSS1
+
R37
OLRCK
AK4682
PDN
+C27
10u
+
7
AK4682-AVDD1
C26
0.1u
+
AK4682-SDTOB
D
MR-552LS
AGND
AGND
E
E
Title
Size
A2
Date:
A
B
C
-25-
D
AKD4141-A
Document Number
Rev
AK4682 CODEC
Tuesday, November 13, 2007 Sheet
E
2
2
of
5
B
C
9V-->5V
5V-->3.3V
IN
3
1
AGND AGND
+ C51
47u
C50
0.1u
2
C49
0.1u
OUT
AGND
AGND
IN
C52 + C53
47u
0.1u
AGND
AGND AGND
L1
OUT
T3
LT1963AEST-1.8
2
1
C54
0.1u
AGND
AGND
+ C55
+
C56
47u
47u
AGND
C57
0.1u
AGND
AGND
R52
AK4682-PVDD
REG
(Short)
OUT
3
A
TM
TVDD
JP21 (3X1)
TVDD
AGND
47u
AGND
R53
REG
AK4682-TVDD
(Short)
TM
DVDD
JP22 (3X1)
DVDD
R54
AK4141-DVDD
(Short)
R56
R55
AK4141-TVDD
L2
AK4682-AVDD2
(Short)
B
+ C59
C58
0.1u
AGND
AK4682-AVDD1
(short)
IN
2
C48 +
47u
E
3.3V-->1.8V
T2
TA48M033F
3
1
A
GND
T1
NJM78M05FA
GND
9V
D
GND
A
(short)
C60 +
47u
R57
L3
(Short)
(short)
C61 +
47u
B
AK4682-DVDD1
(Short)
AGND
AGND
R58
REG
AK4682-DVDD2
(Short)
TM
AVDD1
JP23 (3X1)
AVDD1
R59
AK4141-AVDD1
(Short)
L4
C62 +
47u
1
AGND
DGND
T-45(BK) T-45(BK)
1
DVDD
T-45(R)
1
Logic
T-45(R)
1
AVDD2
T-45(R)
1
AVDD1
T-45(R)
1
TVDD
T-45(R)
1
1
9V
T-45(R)
AGND
C
9V
TVDD
AVDD1
AVDD2
Logic
DVDD
AGND
(short)
C
REG
DGND
TM
AVDD2
JP24 (3X1)
AVDD2
R60
AK4141-AVDD2
(Short)
L5
(short)
C67 +
47u
AGND
REG
74AC14
14
7
14
D
C107
0.1u
C108
0.1u
C109
0.1u
DGND
DGND
8
DGND
14
11
74LS07
U3F
10
13
74LS07
DGND
JP25 (2x1)
GND
E
DGND
12
AGND
Title
A3
DGND
Date:
A
B
0.1u
for
for
for
for
for
DGND 74HC14 74HC14 74AC14 74AC14 74LS07
(Rx)
(Tx)
Size
DGND
C110
(short)
C68 +
47u
7
7
14
U3E
12
VDD
(Short)
C104
0.1u
L6
7
9
74LS07
12
7
13
10
13
74AC14
14
U1F
U8F
10
7
11
E
11
74AC14
U3D
R141
14
8
6
(3X1)
7
U1E
74AC14
14
14
7
9
74AC14
5
74LS07
7
12
U8E
8
TM
Logic
U3C
14
13
74HC14
9
74AC14
7
12
U1D
6
14
U6F
7
13
74HC14
5
74AC14
14
14
U4F
10
VDD
U8D
7
11
74HC14
VDD
U1C
7
10
7
11
74HC14
U6E
7
U4E
VDD
14
VDD
14
VDD
14
D
JP26
Logic
C
-26-
D
AKD4141-A
Document Number
Rev
2
POWER SUPPLY
Monday, June 18, 2007
Sheet
E
3
of
5
A
B
R62
OPT
PORT3
TORX141
C69
0.1u
DGND
DGND
R64
DGND
A
470
OPT
COAX
J10
BNC-R-PC
AK4141-TXIN
C70
JP28
HIF3G-50P-2.54DSA (3x1)
RX
DGND
0.1u
VDD
C71 10u
C72 0.1u
DGND
14
13
12
11
10
9
8
R66
18k
1
38
37
INT0
36
1
74AC14
2
NC
OCKS0
35
3
DIF0
OCKS1
34
4
TEST2
CM1
33
5
DIF1
CM0
32
6
NC
LED2
SML-210LT
14
AVSS
INT1
42
41
43
NC
RX0
45
46
44
RX1
NC
R
U8A
IPS0
2
R67
1k
2
1
VDD
B
INT0
7
INPUT-AK4114
RX2
48
47
U7
8
7
6
5
4
3
2
1
B
C73
0.47u
VDD
TEST1
RP2
M8-1-473
1
2
3
4
5
6
7
RX3
DIF2
DIF1
DIF0
CM1
CM0
OCKS1
OCKS0
SW4
DSS107
+
DGND
+
R65
75
AVDD
3
2
1
E
JP27
HIF3G-50P-2.54DSA (3x1)
TXIN
40
RX(COAX)
VCC
GND
OUT
GND
39
RX(OPT)
R63
(Open)
VCOM
A
D
470
VDD
L7
47u
C
47K
DGND
U6A
1
3
H
U6B
2
3
74HC14
8
PDN
31
DIF2
XTI
30
IPS1
XTO
29
AK4114
DGND
4
C74
0.1u
9
P/SN
DAUX
28
10
XTL0
MCKO2
27
11
XTL1
BICK
26
JP29
HIF3G-50P-2.54DSA (2x1)
IBICK1
SDTO
25
JP30
HIF3G-50P-2.54DSA (2x1)
SDTI
VDD
2
SW5
ATE1D-2M3
C
PDN-DIR
LRCK
DGND
24
DVSS
MCKO1
23
22
VOUT
DVDD
C76
0.1u
JP31
HIF3G-50P-2.54DSA (2x1)
ILRCK
JP32
HIF3G-50P-2.54DSA (2x1)
IMCLK
+
C78
10u
+
C77
10u
21
20
COUT
UOUT
19
18
TX1
BOUT
17
C75
0.1u
16
14
13
DGND
TX0
VIN
TVDD
12
15
DGND
DVSS
C
74HC14
7
1
L
7
14
R68
10k
7
D3
HSU119
14
1
2
VDD
VDD
VDD
DGND
DGND
D
D
IMCLK
THR JP33
HIF3G-50P-2.54DSA (3x1)
U8B
ILRCK
4
51
R70
51
R71
51
R72
51
INV
7
3
74AC14
IBICK2
14
IBICK
R69
SDTI
R73
(Open)
R74
(Open)
R75
(Open)
R76
(Open)
E
PORT4
A1-10PA-2.54DSA DGND
2
IMCLK 1
3
4 SDTI5
IBICK
6 SDTI4
ILRCK 5
7
8 SDTI3
SDTI
SDTI1 9
10 SDTI2
SDTI1
INPUT
SDTI2
SDTI3
E
SDTI4
SDTI5
DGND
Title
Size
A2
Date:
A
B
C
-27-
D
AKD4141-A
Document Number
Rev
S/PDIF INPUT
Monday, June 18, 2007
E
Sheet
2
4
of
5
A
B
C
D
E
PORT5
TOTX141
IN
VCC
3
2
GND
1
TX(OPT)
VDD
C79
0.1u
OPT
COAX
DGND
JP34
HIF3G-50P-2.54DSA (3x1)
TX
DGND
A
R77
240
C80
A
VDD
+
J11
T4
BNC-R-PC DA-02F
TX(COAX)
0.1u
C81 10u
R78
150
C82 0.1u
1:1
RP3
M8-1-473
1
B
37
INT1
AVDD
39
R
41
40
VCOM
AVSS
RX0
42
43
NC
RX1
45
44
46
RX2
INT0
36
NC
OCKS0
35
DIF0
OCKS1
34
CM1
33
CM0
32
IPS0
2
3
4
TEST2
5
DIF1
6
NC
7
DIF2
OUTPUT-AK4114
8
7
6
5
4
3
2
1
NC
VDD
TEST1
U9
14
13
12
11
10
9
8
48
SW6
DSS107
1
2
3
4
5
6
7
RX3
DIF2
DIF1
DIF0
CM1
CM0
OCKS1
OCKS0
47
DGND
38
C83
0.47u
+
DGND
B
47K
DGND
AK4114
PDN
31
XTI
30
R79
0
AK4141-MCKO
1
3
14
9
74HC14
VDD
XTO
9
P/SN
DAUX
28
10
XTL0
MCKO2
27
11
XTL1
BICK
26
12
VIN
SDTO
25
SDTO
8
C84
0.1u
JP36 HIF3G-50P-2.54DSA (2x1)
2
SW7
ATE1D-2M3
74HC14
U6D
6
7
H
IPS1
29
JP35
U6C
5
L
8
R80
10k
7
D4
HSU119
14
1
2
VDD
OBICK1
C88
10u
+
LRCK
MCKO1
JP37 HIF3G-50P-2.54DSA (2x1)
IBICK
24
23
C86
0.1u
C87
10u
22
DVSS
DVDD
21
VOUT
UOUT
20
19
BOUT
COUT
18
17
TX0
TX1
16
C85
0.1u
15
TVDD
13
DGND
14
DGND
+
C
DVSS
PDN-DIT
C
IBICK
JP38
HIF3G-50P-2.54DSA (2x1)
OLRCK
JP39
HIF3G-50P-2.54DSA (2x1)
ILRCK
VDD
DGND
VDD
ILRCK
DGND
D
D
AK4141-MCKO
OBICK
U8C
14
THR JP41
HIF3G-50P-2.54DSA (3x1)
74AC14
OLRCK
6
INV
51
R82
51
OBICK2
7
5
R81
SDTO
R85
(Open)
R86
(Open)
PORT6
A1-10PA-2.54DSA DGND
2
MCKO 1
OBICK 3
4
6
OLRCK 5
7
8 SDTO3
SDTO
SDTO1 9
10 SDTO2
R83
51
R84
51 SDTO1
R87
(Open)
OUTPUT
SDTO2
SDTO3
DGND
E
E
Title
Size
A2
Date:
A
B
C
-28-
D
AKD4141-A
Document Number
Rev
S/PDIF OUTPUT
Tuesday, November 13, 2007
E
Sheet
5
2
of
5
-29-
-30-
-31-
-32-