AOSMD AO6801A

AO6801A
30V Dual P-Channel MOSFET
General Description
Product Summary
The AO6801A uses advanced trench technology to
provide excellent RDS(ON) and low gate charge. This
device is suitable for use as a load switch or in PWM
applications.
ID (at VGS=-10V)
VDS
-30V
-2.3A
RDS(ON) (at VGS =-10V)
< 115mΩ
RDS(ON) (at VGS =-4.5V)
< 150mΩ
RDS(ON) (at VGS =-2.5V)
< 200mΩ
TSOP6
Top View
D1
Bottom View
D2
Top View
G1
1
6
D1
S2
2
5
S1
G2
3
4
D2
G2
G1
S1
Pin1
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
TA=25°C
Continuous Drain
Current
Pulsed Drain Current
Power Dissipation
Junction and Storage Temperature Range
Thermal Characteristics
Parameter
Maximum Junction-to-Ambient A
Maximum Junction-to-Ambient A D
Maximum Junction-to-Lead
Rev 0: Dec. 2011
Steady-State
Steady-State
V
A
1.15
W
0.73
TJ, TSTG
Symbol
t ≤ 10s
±12
-11
PD
TA=70°C
Units
V
-2
IDM
TA=25°C
B
Maximum
-30
-2.3
ID
TA=70°C
C
S2
RθJA
RθJL
www.aosmd.com
-55 to 150
Typ
78
106
64
°C
Max
110
150
80
Units
°C/W
°C/W
°C/W
Page 1 of 5
AO6801A
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
STATIC PARAMETERS
Drain-Source Breakdown Voltage
BVDSS
IDSS
Zero Gate Voltage Drain Current
Conditions
Min
ID=-250µA, VGS=0V
-30
-1
TJ=55°C
-5
Gate-Body leakage current
VDS=0V, VGS=±12V
VGS(th)
Gate Threshold Voltage
VDS=VGS ID=-250µA
-0.6
ID(ON)
On state drain current
VGS=-10V, VDS=-5V
-11
VGS=-10V, ID=-2.3A
Static Drain-Source On-Resistance
TJ=125°C
88
115
143
190
A
mΩ
150
mΩ
mΩ
VDS=-5V, ID=-2.3A
IS
Maximum Body-Diode Continuous Current
8
-0.78
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Gate resistance
V
200
IS=-1A,VGS=0V
Rg
nA
-1.4
103
Diode Forward Voltage
Output Capacitance
±100
-1
139
Forward Transconductance
Reverse Transfer Capacitance
µA
VGS=-2.5V, ID=-1A
VSD
Coss
Units
VGS=-4.5V, ID=-2A
gFS
Crss
Max
V
VDS=-30V, VGS=0V
IGSS
RDS(ON)
Typ
260
VGS=0V, VDS=-15V, f=1MHz
S
-1
V
-1.5
A
315
pF
37
pF
20
pF
8
12
Ω
SWITCHING PARAMETERS
Qg(10V) Total Gate Charge
5.9
7
nC
Qg(4.5V) Total Gate Charge
2.8
4
nC
Qgs
Gate Source Charge
VGS=0V, VDS=0V, f=1MHz
VGS=-10V, VDS=-15V, ID=-2.3A
4
0.7
nC
Qgd
Gate Drain Charge
1
nC
tD(on)
Turn-On DelayTime
6
ns
tr
Turn-On Rise Time
3.5
ns
VGS=-10V, VDS=-15V, RL=6.5Ω,
RGEN=3Ω
tD(off)
Turn-Off DelayTime
tf
Turn-Off Fall Time
trr
Body Diode Reverse Recovery Time
IF=-2.3A, dI/dt=100A/µs
11.5
Qrr
Body Diode Reverse Recovery Charge IF=-2.3A, dI/dt=100A/µs
4.5
20
ns
5
ns
15
ns
nC
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The
value in any given application depends on the user's specific board design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using ≤ 10s junction-to-ambient thermal resistance.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency and duty cycles to keep
initialTJ=25°C.
D. The RθJA is the sum of the thermal impedence from junction to lead RθJL and lead to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-ambient thermal impedence which is measured with the device mounted on 1in2 FR-4 board with
2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev 0: Dec. 2011
www.aosmd.com
Page 2 of 5
AO6801A
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
15
10
-4.5V
-10V
12
VDS=-5V
8
-3V
-6V
6
-ID(A)
-ID (A)
9
-2.5V
4
6
VGS=-2V
3
125°C
2
25°C
0
0
0
1
2
3
4
0
5
210
2
3
4
2
Normalized On-Resistance
190
VGS=-2.5V
170
RDS(ON) (mΩ
Ω)
1
-VGS(Volts)
Figure 2: Transfer Characteristics (Note E)
-VDS (Volts)
Fig 1: On-Region Characteristics (Note E)
150
130
VGS=-4.5V
110
90
VGS=-10V
70
50
1.8
VGS=-10V
ID=-2.3A
1.6
1.4
1.2
VGS=-4.5V
ID=-2A
1
17
5
2
VGS=-2.5V
ID=-1A 10
0.8
0
1
2
3
4
5
6
-ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate
Voltage (Note E)
0
25
50
75
100
125
150
175
0
Temperature (°C)
Figure 4: On-Resistance vs. Junction
18Temperature
(Note E)
250
1.0E+02
ID=-2.3A
1.0E+01
40
1.0E+00
125°C
-IS (A)
RDS(ON) (mΩ
Ω)
200
150
125°C
1.0E-01
1.0E-02
1.0E-03
100
25°C
25°C
1.0E-04
1.0E-05
50
0
4
6
8
10
-VGS (Volts)
Figure 5: On-Resistance vs. Gate-Source Voltage
(Note E)
Rev 0: Dec. 2011
2
www.aosmd.com
0.0
0.2
0.4
0.6
0.8
1.0
1.2
-VSD (Volts)
Figure 6: Body-Diode Characteristics (Note E)
Page 3 of 5
AO6801A
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10
400
VDS=-15V
ID=-2.3A
8
Ciss
Capacitance (pF)
-VGS (Volts)
300
6
4
200
100
Coss
2
0
Crss
0
0
1
2
3
4
5
Qg (nC)
Figure 7: Gate-Charge Characteristics
6
0
5
10
15
20
25
-VDS (Volts)
Figure 8: Capacitance Characteristics
30
10000
100.0
TA=25°C
1000
10µs
RDS(ON)
limited
1.0
100µs
1ms
10ms
0.1
TJ(Max)=150°C
TA=25°C
Power (W)
ID (Amps)
10.0
100
10
10s
DC
1
0.0
0.00001
0.01
0.1
1
VDS (Volts)
10
0.001
0.1
10
1000
100
Pulse Width (s)
Figure 10: Single Pulse Power Rating Junction-toAmbient (Note F)
Figure 9: Maximum Forward Biased Safe
Operating Area (Note F)
Zθ JA Normalized Transient
Thermal Resistance
10
D=Ton/T
TJ,PK=TA+PDM.ZθJA.RθJA
1
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
RθJA=150°C/W
0.1
PD
0.01
Single Pulse
Ton
T
0.001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance (Note F)
Rev 4: April 2011
www.aosmd.com
Page 4 of 5
AO6801A
Gate Charge Test Circuit & Waveform
Vgs
Qg
-10V
-
-
VDC
+
VDC
Qgd
Qgs
Vds
+
DUT
Vgs
Ig
Charge
Resistive Switching Test Circuit & Waveforms
RL
Vds
toff
ton
Vgs
-
DUT
Vgs
VDC
td(on)
t d(off)
tr
tf
90%
Vdd
+
Rg
Vgs
10%
Vds
Unclamped Inductive Switching (UIS) Test Circuit & Waveforms
2
L
E AR= 1/2 LIAR
Vds
Vds
Id
-
Vgs
Vgs
VDC
+
Rg
BVDSS
Vdd
Id
I AR
DUT
Vgs
Vgs
Diode Recovery Test Circuit & Waveforms
Q rr = - Idt
Vds +
DUT
Vgs
Vds Isd
Vgs
Ig
Rev 0: Dec. 2011
L
-Isd
+ Vdd
t rr
dI/dt
-I RM
Vdd
VDC
-
-I F
-Vds
www.aosmd.com
Page 5 of 5