DYNEX DFM1200FXM12

DFM1200FXM12-A000
Fast Recovery Diode Module
Replaces DS5480-1.3
DS5480-2 April 2010 (LN26760)
FEATURES
KEY PARAMETERS

VRRM
VF
IF
IFM
Low Reverse Recovery Charge

High Switching Speed

Low Forward Volt Drop

Isolated AlSiC Base with AlN Substrates

Dual Diodes can be paralleled for 2400A Rating

Lead Free Construction
1200V
1.9V
1200A
2400A
(typ)
(max)
(max)
1(K)
2(K)
3(A)
4(A)
APPLICATIONS

Chopper Diodes

Boost and Buck Circuits

Free-wheel Circuits

Multi-level Switch Inverters
The DFM1200FXM12-A000 is a dual 1200V, fast
recovery diode (FRD) module. Designed for low
power loss, the module is suitable for a variety of high
voltage applications in motor drives and power
conversion.
External connection required for a single 2400A diode
Fig. 1 Circuit configuration
Fast switching times and low reverse recovery losses
allow high frequency operation, making the device
suitable for the latest drive designs employing PWM
and high frequency switching.
The module incorporates an electrically isolated base
plate and low inductance construction enabling circuit
designers to optimise circuit layouts and utilise
grounded heat sinks for safety.
ORDERING INFORMATION
Order As:
DFM1200FXM12-A000
Note: When ordering, please use the complete part
number
Outline type code: F
(See Fig. 7 for further information)
Fig. 2 Package
1 /6
www.dynexsemi.com
DFM1200FXM12-A000
ABSOLUTE MAXIMUM RATINGS
Stresses above those listed under ‘Absolute Maximum Ratings’ may cause permanent damage to the device. In
extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package.
Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect
device reliability.
Tcase = 25°C unless stated otherwise
Symbol
VRRM
Parameter
Test Conditions
Max.
Units
Repetitive peak reverse voltage
Tj = 125°C
1200
V
IF
Forward current (per arm)
DC, Tcase = 75°C, Tj = 125°C
1200
A
IFM
Max. forward current
Tcase = 110°C, tp = 1ms
2400
A
I t value fuse current rating
VR = 0, tp = 10ms, Tj = 125°C
400
kA s
Pmax
Max. transistor power dissipation
Tcase = 25°C, Tj = 125°C
5000
W
Visol
Isolation voltage – per module
Commoned terminals to base plate.
AC RMS, 1 min, 50Hz
2500
V
QPD
Partial discharge – per module
IEC1287, V1 = 1300V, V2 = 1000V, 50Hz RMS
10
pC
2
It
2
2
THERMAL AND MECHANICAL RATINGS
Internal insulation material:
AlN
Baseplate material:
AlSiC
Creepage distance:
20mm
Clearance:
10mm
CTI (Comparative Tracking Index):
350
Symbol
Parameter
Rth(j-c)
Thermal resistance (per arm)
Rth(c-h)
Thermal resistance –
case to heatsink (per module)
Tj
Tstg
Test Conditions
Min
Typ.
Max
Units
-
-
20
°C/kW
-
-
8
°C/kW
-
-
125
°C
-40
-
125
°C
Mounting – M6
-
-
5
Nm
Electrical connections – M8
-
-
10
Nm
Continuous dissipation –
junction to case
Mounting torque 5Nm
(with mounting grease)
Junction temperature
Storage temperature range
Screw Torque
2/6
www.dynexsemi.com
DFM1200FXM12-A000
STATIC ELECTRICAL CHARACTERISTICS – PER ARM
Tcase = 25°C unless stated otherwise.
Symbol
Parameter
IRM
Peak reverse current
VF
Forward voltage
LM
Test Conditions
Min
Typ
VR = 1200V, Tj = 125°C
Max
Units
30
mA
IF = 1200A
1.9
2.2
V
IF = 1200A, Tj = 125°C
2.1
2.4
V
Inductance
20
nH
STATIC ELECTRICAL CHARACTERISTICS
Tcase = 25°C unless stated otherwise.
Symbol
LM
Parameter
Test Conditions
Min
Module inductance
(externally connected in parallel)
Typ
Max
15
Units
nH
DYNAMIC ELECTRICAL CHARACTERISTICS – PER ARM
Tcase = 25°C unless stated otherwise
Symbol
Parameter
Qrr
Reverse recovery charge
Irr
Peak reverse recovery current
Erec
Reverse recovery energy
Test Conditions
Min
Typ.
Max
Units
200
μC
VR = 600V
800
A
dIF/dt = 9000A/μs
80
mJ
IF = 1200A
Tcase = 125°C unless stated otherwise
Parameter
Symbol
Qrr
Reverse recovery charge
Irr
Peak reverse recovery current
Erec
Reverse recovery energy
Test Conditions
Min
Typ.
Max
Units
300
μC
VR = 600V
920
A
dIF/dt = 8400A/μs
140
mJ
IF = 1200A
3 /6
www.dynexsemi.com
DFM1200FXM12-A000
Fig. 3 Diode typical forward characteristics
Fig. 4 Transient thermal impedance
Fig. 5 DC Current rating vs case temperature
Fig. 6 RBSOA
4/6
www.dynexsemi.com
DFM1200FXM12-A000
PACKAGE DETAILS
For further package information, please visit our website or contact Customer Services.
All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
130±0.5
114 ±0.1
29.2 ±0.5
57 ±0.25
57 ±0.25
screwing depth
max 16
14.5±0.2
11 ±0.2
35 ±0.2
140 ±0.5
124 ±0.25
30 ±0.2
5.25±0.3
4 x M8
2.5 ±0.2
3 x M4
16 ±0.2 18.5 ±0.2
6x
7
28 ±0.5
screwing depth
max 8
61.4 ±0.3
18 ±0.2
external connection
2(C)
3(A)
4(A)
38
+1.5
-0.0
1(C)
external connection
Nominal Weight: 900g
Module Outline Type Code:
F
Fig. 7 Module outline drawing
5 /6
www.dynexsemi.com
DFM1200FXM12-A000
HEADQUARTERS OPERATIONS
CUSTOMER SERVICE
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln
Lincolnshire, LN6 3LF, United Kingdom
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln
Lincolnshire, LN6 3LF, United Kingdom
Fax:
Tel:
Fax:
Tel:
+44(0)1522 500020
+44(0)1522 502901 / 502753
email:
[email protected]
+44(0)1522 500550
+44(0)1522 500500
 Dynex Semiconductor TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRODUCED IN UNITED KINGDOM.
Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hand corner of the front page, to indicate product status.
The annotations are as follows:Target Information:
This is the most tentative form of information and represents a very preliminary specification.
No actual work on the product has been started.
Preliminary Information:
The product is in design and development.
The datasheet represents the product as it is understood but may change.
Advance Information:
The product design is complete and final characterisation for volume production is well in hand.
No Annotation:
The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the company in writing) may not be used, appli ed or reproduced for any purpose nor form part of any order or
contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee expressed or implied is made regarding the capability, performance or
suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible
methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the users responsibility to
fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These
products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and servi ces provided
subject to the Company’s conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
6/6
www.dynexsemi.com