2N2894ADCSM DUAL HIGH SPEED, MEDIUM POWER PNP GENERAL PURPOSE TRANSISTOR IN A HERMETICALLY SEALED CERAMIC SURFACE MOUNT PACKAGE MECHANICAL DATA Dimensions in mm (inches) FEATURES 3 1 4 A 6 5 6.22 ± 0.13 (0.245 ± 0.005) 0.23 rad. (0.009) A= 1.27 ± 0.13 (0.05 ± 0.005) LCC2 PACKAGE Underside View PAD 1 - Collector 1 PAD 2 - Base 1 PAD 3 - Base 2 PAD 4 - Collector 2 PAD 5 - Emitter 2 PAD 6 - Emitter 1 4.32 ± 0.13 (0.170 ± 0.005) 2 • SILICON PLANAR EPITAXIAL DUAL PNP TRANSISTOR 1.40 ± 0.15 (0.055 ± 0.006) 1.65 ± 0.13 (0.065 ± 0.005) 0.64 ± 0.08 (0.025 ± 0.003) 2.54 ± 0.13 (0.10 ± 0.005) 2.29 ± 0.20 (0.09 ± 0.008) • HERMETIC CERAMIC SURFACE MOUNT PACKAGE • CECC SCREENING OPTIONS AVAILABLE • SPACE QUALITY LEVELS OPTIONS • HIGH SPEED SATURATED SWITCHING APPLICATIONS: For high reliablitity general purpose applications requiring small size and low weight devices. ABSOLUTE MAXIMUM RATINGS(Tcase = 25°C unless otherwise stated) PER SIDE VCBO VCEO VEBO IC PD PD Rja Tj Tstg Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Collector Current Device Dissipation Derate above 50°C Thermal Resistance Junction to Ambient Max Junction Temperature Storage Temperature TOTAL –12V –12V –4.5V –200mA 300mW 500mW 2mW / °C 3.3mW / °C 420°C / W 250°C / W 200°C –65 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 6621 Issue 1 2N2894ADCSM ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit V(BR)CBO* Collector – Base Breakdown Voltage IC = 10μA IE = 0 – 12 V(BR)CEO Collector – Emitter Breakdown Voltage IC = 10mA IB = 0 – 12 V(BR)EBO Emitter – Base Breakdown Voltage IE = 100μA IC = 0 – 4.5 ICBO Collector Cut-off Current VCB = –10V Tamb = 125°C – 10 μA ICES Collector Cut-off Current VBE = 0 VCE = –10V – 50 nA IC = –10mA IB = –1.0mA –0.130 IC = –30mA IB = –3mA –0.190 IC = –100mA IB = –10mA – 0.450 IC = –10mA IB = –1.0mA –0.78 –0.920 IC = –30mA IB = –3mA –0.85 –1.15 IC = –100mA IB = –10mA IC = –10mA VCE = –0.3V 30 IC = –30mA VCE = –0.5V 40 IC = –100mA VCE = –1.0V 30 IC = –30mA VCE = –0.5V VCE(sat) VBE(sat) hFE Collector – Emitter Saturation Voltage Base – Emitter On Voltage DC Current Gain Tamb = -55°C fT Current Gain Bandwidth Product Cebo Emitter – Base – Capacitance Ccbo Collector – Base – Capacitance ton Turn on Time toff Turn off Time VCE = –10V f = 100MHz IC = –30mA VEB = –5V IC = 0 f = 140kHz VCB = –5V IE = 0 f = 140kHz IC = –30mA VCE = –2V IB2 = –1.5mA IC = –30mA VCE = –2V IB1 = IB2= –1.5mA V V V –1.5 150 –— 20 800 MHz 6 pF 4.5 pF 60 ns 35 ns * Pulse Test: tp ≤ 300μs, δ ≤ 2%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 6621 Issue 1