- SERIES 62 POWER RELAYS 16 - 20 A a range of power relays with high insulation between circuits (2500 V) and 2 or 3 CO or NO contacts PCB mount, plug-in FASTON 187 (4.8 x 0.5 mm) or FASTON 250 (6.3 x 0.8 mm) versions available AC or DC coils dual-function test button module facilities: low consumption LED indicator and surge supression diode available rear DIN rail mount options sockets and accessories: see 92 series approvals (according to type): IMQ, SEMKO, SEV, cUL, VDE DOOR, GATE OPENERS ESCALATORS LIFTS ELECTRIC MOTOR LOADS PLASTIC MOLDING CERAMICS MACHINES INDUSTRY MACHINES 3 67 62.22 62.23 0300 c c P.C.B. RELAY TYPE 62.22 2 CO (DPDT) 16 A TYPE 62.23 3 CO (3PDT) 16 A (*) - tin plated copper pins (1.5 x 0.8 mm) - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 38 35.5 35.5 38 6 6 45.5 38 45.5 38 P.C.B. RELAY (3 mm gap between open contacts) TYPE 62.22 - 0300 2 NO (DPST) 20 A TYPE 62.23 - 0300 3 NO (3PST) 16 A (*) - tin plated copper pins (1.5 x 0.8 mm) - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 7.9 11.1 1 4 3 6 A 4 2 1 9 7 5 A 62.22 8 5.8 5.5 22.2 3 3 4 6 B 62.22 8.7 7.9 1 2 3 4 5 6 7 8 5.4 5.8 8 9 7.6 A B 62.23 8.7 A 8 11.2 9 B 62.23 - 0300 22.2 7.9 7.9 4 6 7 9 8 B 62.22 - 0300 8.7 11.1 11.1 7.9 11.2 11.2 7.6 A 8.6 7.6 7.9 6 8 7 B 7.9 11.1 5 4 62.22 - 0300 11.1 11.1 11.1 62.23 - 0300 9 A B 8 2 A 7.9 6 7 7.9 7.6 7.9 4 9 5.4 5.8 9 22.2 6 7.9 1 7.9 62.22 - 0300 62.23 7 68 8.6 7.6 7.9 8 7 B 7.9 11.1 62.23 4 5 6 7 8 9 8 2 7.9 2 22.2 62.22 2 7.9 7.6 A B 62.23 - 0300 8.7 62.32 62.43 c c FASTON 187 PLUG-IN RELAY TYPE 62.32 2 CO (DPDT) 16 A TYPE 62.33 3 CO (3PDT) 16 A (*) - tin plated copper connections: FASTON 187 (4.8 x 0.5 mm) - test button, LED and diode available - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 38 35.5 38 38 35.5 11.1 1 4 7 3 6 9 A 4 2 1 8.6 7.6 8.3 5.5 7.9 22 5 A 7.9 7.9 11.1 62.42 3 8 7 B 62.32 8 62.33 6 9 B 1 4 3 6 A 62.33 4 2 1 9 7 5 8.6 7.6 8.3 3 8 7 A B 62.42 7.9 7.9 5.5 62.43 6 9 B 62.43 7.9 22.2 1 3 4 6 7 9 A B 62.42 7.9 5.5 8.3 7.6 8.6 1.5 8 35.5 8 1.5 22 62.32 35.5 8 7 7 45.5 45.5 38 P.C.B. RELAY TYPE 62.42 2 CO (DPDT) 16 A TYPE 62.43 3 CO (3PDT) 16 A (*) - tin plated copper pins (1.5 X 0.5 mm) - test button, LED and diode available - standard contact material: Ag CdO - option: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 7.9 11.1 11.1 1 2 3 4 5 6 7 8 9 A B 5.5 8.3 7.6 8.6 62.43 69 62.52 62.53 0300 c c P.C.B. RELAY WITH BIFURCATED TERMINALS TYPE 62.52 2 CO (DPDT) 16 A TYPE 62.53 3 CO (3PDT) 16 A (*) - tin plated copper pins (1.7 x 0.8 mm) - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 35.5 38 38 35.5 1 4 3 6 A 5 A B 3 3 4 6 2 9 5.4 5.8 A B 62.52 1 2 3 4 5 6 8 7 8.7 8 9 5.4 5.8 7.6 A B 62.53 8.7 7 9 B 62.52 - 0300 4.6 5.6 6 9 5.6 4.6 6.5 4.6 6.5 4.6 5.6 11.3 8 7.6 A 6 8 A B 4 8 5 4 7 17.6 8 11.3 62.53 - 0300 62.53 - 0300 5.6 4.6 8.6 7.6 5.6 4.6 6.5 4.6 6.5 4.6 5.6 9 A B 5.6 4.6 6.5 4.6 6.5 4.6 5.6 7.6 4.6 5.6 6 7 9 4.6 5.6 1 17.6 4 6 62.53 17.6 5.6 4.6 62.52 - 0300 8 7 7 70 4 2 1 62.52 5.6 4.6 8 5.8 5.5 62.53 9 7 8.6 7.6 5.6 4.6 6.5 4.6 6.5 4.6 5.6 B 62.53 - 0300 8.7 4 5 6 7 8 9 2 4.6 5.6 2 17.6 62.52 2 5.6 4.6 6 6 45.5 38 45.5 38 P.C.B. RELAY WITH BIFURCATED TERMINALS (3 mm gap between open contacts) TYPE 62.52 - 0300 2 NO (DPST) 20 A TYPE 62.53 - 0300 3 NO (3PST) 16 A (*) - tin plated copper connections (1.7 x0.8 mm) - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 11.3 8 7.6 A B 62.52 - 0300 8.7 62.62 62.83 c c FASTON 187 FLANGE RELAY TYPE 62.62 2 CO (DPDT) 16 A TYPE 62.63 3 CO (3PDT) 16 A (*) - cover with flanges for Ø 3 ÷ 3.5 mm screw mount - tin plated copper connections: FASTON 187 (4.8 x 0.5 mm) - test button, LED and diode available - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 35.5 38 35.5 38 45.5 7.9 22.2 8 7 B 62.62 3 A 1 6 4 7 9 3 6 9 A B 4 2 1 5 3 8 7 B 62.82 62.63 8.6 7.6 7.9 A 6 9 B 62.83 38 3.6 8 5.8 5.5 38 3.6 9.5 A 5 11.1 62.83 45 9 4 2 1 7.9 9.5 6 45 3 7.9 62.82 12.2 7 5.5 3.5 4 8.6 7.6 8.3 3.5 1 7.9 3.5 11.1 62.63 3.5 7.9 63.2 7.9 8 7 22.2 62.62 63.2 7.9 3.6 20.1 12.2 38 45.5 38 FASTON 250 FLANGE RELAY TYPE 62.82 2 CO (DPDT) 16 A TYPE 62.83 3 CO (3PDT) 16 A (*) - cover with flanges for Ø 3 ÷ 3.5 mm screw mount - tin plated copper connections: FASTON 250 (6.3 x 0.8 mm) - test button, LED and diode available - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) 3.6 20.1 71 TECHNICAL DATA DIELECTRIC STRENGTH tested at: leakage current ≤ 10 mA for 1 min at 50 Hz 62.82 0300 c FASTON 250 FLANGE RELAY (3 mm gap between open contact) TYPE 62.82 - 0300 2 NO (DPST) 20 A TYPE 62.83 - 0300 3 NO (3PST) 16 A (*) - cover with flanges for Ø 3 ÷ 3.5 mm screw mount - tin plated copper connections: FASTON 250 (6.3 x 0.8 mm) - test button, LED and diode available - standard contact material: Ag CdO - options: see coding table page 76 - ordering information: see page 76 (*) Common phase connection; if different phases are connected to adjacent contacts, then rated current = 10 A 250 V AC (P max = 2500 V A) between coil and contacts between open contacts 1500 V between open contacts NO version 2500 V between adjacent contacts 2500 V between frame and live parts relay without external ground SURGE TEST (1.2/50µs) voltage between coil and contacts 4000 V INSULATION RESISTANCE 3 ≥ 20 · 10 MΩ INSULATION GROUP C 400 MAX SWITCHING FREQUENCY - without load: - at rated load: 36000 cycles/h 600 cycles/h AMBIENT TEMPERATURE – 40 to + 70 °C (T max = 50°C NO version) MECHANICAL LIFE AC: 10 · 1066 cycles DC: 30 · 10 cycles PROTECTION CATEGORY OF ENCLOSURES IP 40 OPERATE AND RELEASE TIME pick-up time (from 0 to UN) drop-out time (from UN to 0) ≤ 30 ms (including contact bounce) ≤ 30 ms (including contact bounce) TYPE OF DUTY continuous PICK-UP CLASS C (according to IEC 255) DIELECTRIC TEST 38 TYPE OF RELAY 35.5 8 45.5 38 7.9 22.2 7.9 7.9 62.82 - 0300 6 4 7 A 9 62.82 - 0300 7.9 5 4 8.6 7.6 8 11.3 6 8 7 B 11.1 62.83 - 0300 A 9 B 62.83 - 0300 3.5 38 3.6 20.1 72 12.2 3.5 63.2 45 9.5 3.6 2500 V 2 all - or - nothing CONTACT SPECIFICATION 2 - 3 CO (DPDT - 3PDT) 3 NO (3PST) 62.22 - 0300 62.52 - 0300 62.82 - 0300 4000 VA 5000 VA RATED CURRENT 16 A 20 A MAXIMUM PEAK CURRENT 30 A 40 A RATED VOLTAGE 250 V AC 250 V AC MAXIMUM SWITCHING VOLTAGE 400 V AC 400 V AC NOMINAL RATE IN AC1 BREAKING CAPACITY IN DC1 see diagram H 62 0.8 kW, 1.2 HP 0.8 kW, 1.2 HP CONTACT RESISTANCE: - initial ≤ 50 mΩ ≤ 50 mΩ STANDARD CONTACT MATERIAL Ag CdO Ag CdO SINGLE PHASE HP MOTOR RATING H 62 F 62 20 MAX SWITCHING CURRENT (A) CYCLES 5 · 106 5 5 · 10 5 · 104 10 6 4 2 1 1 2 3 4 KVA B 0.4 0.2 0.1 0 A 0.6 20 60 100 140 180 220 VOLTAGE V (DC) LOAD Breaking capacity for DC1 load at 600 cycles/h. Load applied to 1 contact. A = for relays types 62.22 - 0300 - 62.52 - 0300 and 62.82 - 0300 B = other types Contact life vs AC1 load at 600 cycles/h. K 62 REDUCTION FACTOR K 1 0.8 0.6 0.4 1 0.8 0.6 0.4 0.2 COS ϕ Load reduction factor vs cos ϕ. 73 COIL SPECIFICATION VERSIONS: AC - alternating current 50/60 Hz DC - direct current DI - DC coil with a diode in parallel AC DC AC - NO DC - NO 2.2 VA 1.3 W 3 VA 3W OPERATING RANGE 0.8 ÷ 1.1 UN 0.8 ÷ 1.1 UN 0.85 ÷ 1.1 UN 0.85 ÷ 1.1 UN HOLDING VOLTAGE ≤ 0.8 UN ≤ 0.6 UN ≤ 0.8 UN ≤ 0.6 UN MUST DROP-OUT VOLTAGE ≥ 0.2 UN ≥ 0.1 UN ≥ 0.2 UN ≥ 0.1 UN 180 A 250 A 220 A 420 A F (+155°C) F (+155°C) F (+155°C) F (+155°C) 41°C/W 41°C/W 38°C/W 38°C/W RATED POWER NOMINAL MAGNETOMOTIVE FORCE THERMAL INSULATION CLASS OF WIRE THERMAL RESISTANCE CONDUCTED DISTURBANCE IMMUNITY BURST (acc. to EN 61000-4-4) SURGE (acc. to EN 61000-4-5) livel 4 (4kV) livel 4 (4kV) AC VERSION DATA (R values relate to +20°C. Tolerance of R and I values: ±10%.) rated voltage UN (V) U min U max (V) (V) resistance R (Ω) inductance with closed armature (H) nominal absorption I at UN 50 Hz (mA) CO NO CO NO CO NO CO NO CO NO 6 4.8 5.1 6.6 6.6 4.6 3.5 367 550 0.05 0.032 12 9.6 10.2 13.2 13.2 19 14 183 275 0.2 0.13 24 19.2 20.4 26.4 26.4 80 67 92 137 0.8 0.52 48 38.4 40.8 52.8 52.8 320 220 46 70 3.2 2 60 48 51 66 66 500 350 37 55 4.9 3.3 110 88 93.5 121 121 1800 1200 20 30 16.5 11 125 100 106 137 137 2000 1400 17.6 26 22 14.6 230 184 196 253 253 7250 5000 10.4 14 66 50 240 192 204 264 264 8500 5300 9.2 13.2 78 55 DC VERSION DATA (R values relate to +20°C. Tolerance of R and I values: ±10%.) rated voltage UN (V) 74 U min U max (V) (V) resistance R (Ω) nominal absorption I at UN (mA) CO NO CO NO CO NO CO NO 6 4.8 5.1 6.6 6.6 28 12 214 500 12 9.6 10.2 13.2 13.2 110 48 109 250 24 19.2 20.4 26.4 26.4 445 192 54 125 48 38.4 40.8 52.8 52.8 1770 770 27 63 60 48 51 66 66 2760 1200 21.7 50 110 88 93.5 121 121 9420 4000 11.7 27 125 100 106 137 137 12000 5200 10.4 24 COIL SPECIFICATION R 62 Umin UN 1 0.9 0.8 0.7 0.6 0.5 - 40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) DC coil min pick-up voltage vs ambient temperature. Valid for CO (DPDT) types. Umin = pick-voltage UN = rated voltage S 62/2 70 70 60 60 1.1 UN 50 UN 40 30 0.8 UN 20 TEMPERATURE RISE "∆t " (°C) TEMPERATURE RISE "∆t " (°C) S 62/1 50 1.1 UN 40 UN 30 0.8 UN 20 10 10 0 0 10 20 30 40 50 10 60 min 20 HEATING TIME 40 50 60 min HEATING TIME Temperature rise "∆t " vs applied voltage. DC coils. Temperature rise "∆t " vs applied voltage. AC 50 Hz coils. S 62NO/1 S 62NO/2 1.1 UN 90 80 90 80 UN 70 60 0.85 UN 50 40 30 TEMPERATURE RISE "∆t " (°C) TEMPERATURE RISE "∆t " (°C) 30 70 UN 60 50 0.85 UN 40 30 20 20 10 10 0 1.1 UN 0 10 20 30 40 50 60 min HEATING TIME Temperature rise "∆t " vs applied voltage. DC coils, NO version. 10 20 30 40 50 60 min HEATING TIME Temperature rise "∆t " vs applied voltage. AC 50 Hz coils, NO version. 75 ORDERING INFORMATION Example: a 62 series FASTON 250 connection relay with 2 CO (DPDT) rated at 230 V AC with NO contacts and LED has the following code: 6 2 series 8 2 8 2 coil version (see table) type No. of poles (CO) 3 0 coil rated voltage 0 3 A B 3 0 D C option (see table) For standard relays with no options, use the first 8 digits only. COIL VERSIONS Code Coil types 9 DC Direct current 8 AC Alternating current at 50/60 Hz 3 DI Direct current with a diode in parallel to coil OPTIONS (* Available for DC coil only) A Contact material B Circuit contact 0 standard 0 standard 0 standard 0 standard 3 NO 1 test button 5 top mount flange 3 LED (AC) 7 top DIN rail mount 5 test button + LED, AC only 8 rear DIN rail mount REAR DIN 46277 RAIL MOUNT (0008) A B Coil version = 3 76 C Additional features D *6 LED + diode (positive to A) DC only *7 test button + LED + diode (positive to A) DC only *8 LED + diode (positive to B) DC only *9 test button + LED + diode (positive to B) DC only TEST BUTTON (0010) A B Option= 0030 Special applications LED (0030) B A Option= 0060 - 0070 B A Option= 0080 - 0090 - SERIES 92 SOCKETS & ACCESSORIES FOR 62 SERIES RELAYS a range of sockets and accessories for the 62 series relays solder, screw terminal, PCB, panel or DIN rail 46277 mount versions available IP 20 finger protection with additional plastic cover flammability in accordance with UL 94 approvals (according to type): SEV, cUL 77 92.13 92.43.1 c c SCREW TERMINAL SOCKET (panel or DIN rail 46277 mount) TYPE 92.43.1 for relays types 62.32 - 62.33 Accessories: retaining clip TYPE 092.53 Accessories: IP 20 protective cover TYPE 092.55 P.C.B. SOCKET (flange mount with M3 screws) TYPE 92.13 for relays types 62.32 - 62.33 Accessories: retaining clip TYPE 092.54 SOLDER CONNECTIONS SOCKET TYPE 92.33 for relays types 62.32 - 62.33 Accessories: retaining clip TYPE 092.54 CHARACTERISTICS - LOAD: 16 A 250 V - INSULATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2.5 kV AC - BODY MATERIAL: self-extinguishing PPEm (V1) - CONNECTIONS: Cu Zn 33 nickel plated - Non removable pozidrive slotted terminal screws. CHARACTERISTICS - LOAD: 32 A 250 V (10 A max for each contact circuit) 3 - INSULATION RESISTANCE: ≥ 10 MΩ - DIELECTRIC STRENGTH: ≥ 2.5 kV AC - BODY MATERIAL: self-extinguishing PPEm (V1) - CONNECTIONS: Cu Zn 33 tin plated 40 1 38 1 18.5 10.5 11.1 23 11.1 36 1.6 5.5 8.3 81.5 92.13 38 1 11.1 11.1 8.3 9 13 13.1 3.75 1 9.5 = 40 21 35 = 7.6 8.3 50 50 1.6 5.5 11 24 35.5 26.5 3.75 7.6 15.5 4.5 9 92.33 11 = 31 42.5 = 4.5 11 35.5 78