GM71V16400C GM71VS16400CL 4,194,304 WORDS x 4 BIT CMOS DYNAMIC RAM Description Features The GM71V(S)16400C/CL is the new generation dynamic RAM organized 4,194,304 words x 4 bit. GM71V(S)16400C/CL has realized higher density, higher performance and various functions by utilizing advanced CMOS process technology. The GM71V(S)16400C/CL offers Fast Page Mode as a high speed access mode. Multiplexed address inputs permit the GM71V(S)16400C/CL to be packaged in a standard 300 mil 24(26) pin SOJ, and a standard 300 mil 24(26) pin plastic TSOP II. The package size provides high system bit densities and is compatible with widely available automated testing and insertion equipment. System oriented features include single power supply 3.3V+/-0.3V tolerance, direct interfacing capability with high performance logic families such as Schottky TTL. * 4,194,304 Words x 4 Bit Organization * Fast Page Mode Capability * Single Power Supply (3.3V+/-0.3V) * Fast Access Time & Cycle Time Pin Configuration tRAC tCAC GM71V(S)16400C/CL-5 GM71V(S)16400C/CL-6 GM71V(S)16400C/CL-7 50 60 70 13 15 18 tRC tPC 90 110 130 35 40 45 * Low Power Active : 324/288/252mW (MAX) Standby : 7.2mW (CMOS level : MAX) : 0.36mW (L-version : MAX) * RAS Only Refresh, CAS before RAS Refresh, Hidden Refresh Capability * All inputs and outputs TTL Compatible * 4096 Refresh Cycles/64ms * 4096 Refresh Cycles/128ms (L-version) * Self Refresh Operation (L-version) * Battery backup operation (L-version) * Test function : 16bit parallel test mode 24(26) SOJ 24(26) TSOP II VCC 1 26 VSS VCC 1 26 VSS I/O1 2 25 I/O4 I/O1 2 25 I/O4 I/O2 3 24 I/O3 I/O2 3 24 I/O3 WE 4 23 CAS WE 4 23 CAS RAS 5 22 OE RAS 5 22 OE A11 6 21 A9 A11 6 21 A9 A10 8 19 A8 A10 8 19 A8 A0 9 18 A7 A0 9 18 A7 A1 10 17 A6 A1 10 17 A6 A2 11 16 A5 A2 11 16 A5 A3 12 15 A4 A3 12 15 A4 VCC 13 14 VSS VCC 13 14 VSS (Top View) Rev 0.1 / Apr’01 (Unit: ns) GM71V16400C GM71VS16400CL Pin Description Pin Function Pin Function A0-A11 Address Inputs WE Read/Write Enable A0-A11 Refresh Address Inputs OE Output Enable I/O1-I/O4 Data Input/Data Output VCC Power (+3.3V) RAS Row Address Strobe VSS Ground CAS Column Address Strobe NC No Connection Ordering Information Type No. Access Time Package GM71V(S)16400CJ/CLJ-5 GM71V(S)16400CJ/CLJ-6 GM71V(S)16400CJ/CLJ-7 50ns 60ns 70ns 300 Mil 24(26) Pin Plastic SOJ GM71V(S)16400CT/CLT-5 GM71V(S)16400CT/CLT-6 GM71V(S)16400CT/CLT-7 50ns 60ns 70ns 300 Mil 24(26) Pin Plastic TSOP II Absolute Maximum Ratings Symbol Parameter Rating Unit 0 ~ 70 C -55 ~ 125 C -0.5 ~ Vcc+0.5(<=4.6V(MAX)) V -0.5 ~ 4.6 V TA Ambient Temperature under Bias TSTG Storage Temperature VIN/OUT Voltage on any Pin Relative to VSS VCC Supply Voltage Relative to VSS IOUT Short Circuit Output Current 50 mA PD Power Dissipation 1.0 W Recommended DC Operating Conditions (TA = 0 ~ 70C) Symbol Parameter Min Typ Max Unit VCC Supply Voltage 3.0 3.3 3.6 V VIH Input High Voltage 2.0 - Vcc+0.3 V VIL Input Low Voltage -0.3 - 0.8 V Note: All voltage referred to Vss. Rev 0.1 / Apr’01 GM71V16400C DC Electrical Characteristics (VCC = 3.3V+/-0.3V, Vss = 0V, TA = 0 ~ 70C) Symbol VOH Min Max Unit 2.4 VCC V 0 0.4 V 50ns - 90 60ns - 80 70ns - 70 - 2 Parameter Output Level Output "H" Level Voltage (IOUT = -2mA) VOL Output "L" Level Voltage (IOUT = 2mA) Operating Current Average Power Supply Operating Current (RAS, CAS Cycling : tRC = tRC min) ICC1 ICC2 Standby Current (TTL) Power Supply Standby Current ,D High-Z) I 50ns - 90 Average Power Supply Current RAS Only Refresh Mode t = min) 60ns - 80 70ns - 70 Fast Page Mode Current 50ns - 80 Fast Page Mode ( PC = tPC min) 60ns - 70 70ns - 60 ICC5 ICC6 CAS-before-RAS Refresh Current t = min) ns 60 - 100 - 90 - 70ns Battery Backup Operating Current(Standby with CBR Refresh) (CBR refresh, tRC = 31.3us, tRAS <= 0.3us, DOUT = High-Z, CMOS interface) I IL(O) (D is Disabled, 0V<= <= 4.6V) Note: 1. I I 2. Address can be changed once or less while RAS = V 3. Address can be changed once or less while CAS = V 4. L - Version. ’01 mA 2 1, 3 uA 4 mA - uA 5 Self-Refresh Mode Current (RAS, CAS<=0.2V, =High-Z, CMOS interface) Input Leakage Current Any Input (0V<=VIN<= 4.6V) mA 70 Standby Current RAS = VIH CAS = VIL DOUT = Enable L(I) mA mA Power Supply Standby Current (RAS, CAS >= VCC - 0.2V, DOUT = High-Z) Note -10 1 200 uA 10 uA 10 uA GM71V16400C GM71VS16400CL Capacitance (VCC = 3.3V+/-0.3V, TA = 25C) Symbol Parameter Min Max Unit Note CI1 Input Capacitance (Address) - 5 pF 1 CI2 Input Capacitance (Clocks) - 7 pF 1 CI/O Output Capacitance (Data-In/Out) - 7 pF 1, 2 Note: 1. Capacitance measured with Boonton Meter or effective capacitance measuring method. 2. CAS = VIH to disable DOUT. AC Characteristics (VCC = 3.3V+/-0.3V, Vss=0V, TA = 0 ~ 70C, Notes 1, 2, 3,19,20) Test Conditions Input rise and fall times : 2ns Input timing reference levels : 0.8V, 2.0V Output timing reference levels : 0.8V, 2.0V Output load : 1 TTL gate + CL (100pF) (Including scope and jig) Read, Write, Read-Modify-Write and Refresh Cycles (Common Parameters) Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-6 C/CL-7 C/CL-5 Unit Note Min Max Min Max Min Max tRC Random Read or Write Cycle Time 90 - 110 - 130 - ns tRP RAS Precharge Time 30 - 40 - 50 - ns tCP CAS Precharge Time 8 - 10 - 10 - ns tRAS RAS Pulse Width 50 10,000 60 10,000 70 10,000 ns tCAS CAS Pulse Width 13 10,000 15 10,000 18 10,000 ns tASR Row Address Set up Time 0 - 0 - 0 - ns tRAH Row Address Hold Time 8 - 10 - 10 - ns tASC Column Address Set-up Time 0 - 0 - 0 - ns tCAH tRCD tRAD tRSH tCSH Column Address Hold Time 8 - 10 - 15 - ns RAS to CAS Delay Time 18 45 20 45 20 52 ns 4 RAS to Column Address Delay Time 13 30 15 30 15 35 ns 5 RAS Hold Time 13 - 15 - 18 - ns CAS Hold Time 50 - 60 - 70 - ns tCRP tODD CAS to RAS Precharge Time 5 - 5 - 5 - ns 13 - 15 - 18 - ns 6 OE Delay Time from DIN 0 - 0 - 0 - ns 7 CAS Delay Time from DIN 0 - 0 - 0 - ns 7 Transition Time (Rise and Fall) 3 50 3 50 3 50 ns 8 tDZO tDZC tT OE to DIN Delay Time Rev 0.1 / Apr’01 GM71V16400C Read Cycle GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-5 C/CL-6 C/CL-7 Symbol Unit Note 9,10,21 Min Max Min Max Min tRAC tCAC Access Time from RAS - 50 - 60 - 70 ns Access Time from CAS - 13 - 15 - 18 ns tAA Access Time from Address - 25 - 30 - 35 ns tOAC Access Time from OE - 13 - 15 - 18 ns tRCS tRCH Read Command Setup Time 0 - 0 - 0 - ns Read Command Hold Time to CAS 0 - 0 - 0 - ns 13 tRRH Read Command Hold Time to RAS 5 - 5 - 5 - ns 13 tRAL tCAL Column Address to RAS Lead Time 25 - 30 - 35 - ns Column Address to CAS Lead Time 25 - 30 - 35 - ns tCLZ CAS to Output in low-Z 0 - 0 - 0 - ns tOH Output Data Hold Time 3 - 3 - 3 - ns tOHO Output Data Hold Time from OE 3 - 3 - 3 - ns tOEZ tOFF Output Buffer Turn-off Time to OE - 13 - 15 - 15 ns 14 Output Buffer Turn-off Time - 13 - 15 - 15 ns 14 tCDD CAS to DIN Delay Time 13 - 15 - 18 - ns 6 Unit Note 15 10,11, 18,21 10,12, 18,21 10 Write Cycle Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-6 C/CL-7 C/CL-5 Min Max Min Max Min Max tWCS Write Command Setup Time 0 - 0 - 0 - ns tWCH Write Command Hold Time 8 - 10 - 15 - ns tWP Write Command Pulse Width 8 - 10 - 10 - ns tRWL Write Command to RAS Lead Time 13 - 15 - 18 - ns tCWL Write Command to CAS Lead Time 13 - 15 - 18 - ns tDS tDH Data-in Setup Time 0 - 0 - 0 - ns 16 Data-in Hold Time 8 - 10 - 15 - ns 16 Rev 0.1 / Apr’ GM71VS16400CL Read- Modify-Write Cycle Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tRWC Read-Modify-Write Cycle Time tRWD 131 - 155 - 181 - ns RAS to WE Delay Time 73 - 85 - 98 - ns 15 tCWD CAS to WE Delay Time 36 - 40 - 46 - ns 15 tAWD Column Address to WE Delay Time 48 - 55 - 63 - ns 15 tOEH OE Hold Time from WE 13 - 15 - 18 - ns Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tCSR CAS Setup Time (CAS-before-RAS Refresh Cycle) 5 - 5 - 5 - ns tCHR CAS Hold Time (CAS-before-RAS Refresh Cycle) 8 - 10 - 10 - ns tWRP WE Setup Time (CAS-before-RAS Refresh Cycle) 0 - 0 - 0 - ns tWRH WE Hold Time (CAS-before-RAS Refresh Cycle) 10 - 10 - 10 - ns tRPC RAS Precharge to CAS Hold Time 5 - 5 - 5 - ns Fast Page Mode Cycle Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-6 C/CL-7 C/CL-5 Unit Note Min Max Min Max Min Max tPC Fast Page Mode Cycle Time tRASP 35 - 40 - 45 - ns Fast Page Mode RAS Pulse Width - 100,000 - 100,000 - 100,000 ns 17 tACP Access Time from CAS Precharge - 30 - 35 - 40 ns 10,18,21 tRHCP RAS Hold Time from CAS Precharge 30 - 35 - 40 - ns Rev 0.1 / Apr’01 GM71V16400C GM71VS16400CL Fast Page Mode Read-Modify-Write Cycle Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tPRWC Fast Page Mode Read-Modify-Write Cycle Time 76 - 85 - 96 - ns tCPW WE Delay Time from CAS Precharge 53 - 60 - 68 - ns 15 Unit Note Test Mode Cycle ∗20 Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-5 C/CL-6 C/CL-7 Min Max Min Max Min Max tWTS Test Mode WE Setup Time 0 - 0 - 0 - ns tWTH Test Mode WE Hold Time 10 - 10 - 10 - ns Refresh Symbol Parameter GM71V(S)16400 GM71V(S)16400 GM71V(S)16400 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tREF Refresh Period - 64 - 64 - 64 ms tREF Refresh Period (L - version) - 128 - 128 - 128 ms 4096 cycles 4096 cycles Unit Note Self Refresh Mode ( L-version ) Symbol Parameter tRASS RAS Pulse Width(Self-Refresh) tRPS tCHS GM71VS16400 CL-5 GM71VS16400 CL-6 GM71VS16400 CL-7 Min Max Min Max Min Max 100 - 100 - 100 - us RAS Precharge Time(Self-Refresh) 90 - 110 - 130 - ns CAS Hold Time(Self-Refresh) -50 - -50 - -50 - ns Rev 0.1 / Apr’01 GM71V16400C Notes: 1. AC Measurements assume tT = 5ns. 2. initialization cycles (any combination of cycles containing RAS-only refresh or CAS-beforeRAS refresh). If the internal refresh counter is used, a minimum of eight CAS-before-RAS 3. Only row address is indispensable on address A10 and A11. 4. Operation with the tRCD(max) limit insures that tRAC(max) can be met, tRCD(max) is specified as a reference point only; if tRCD is greater than the specified tRCD(max) limit, then access time is controlled exclusively by tCAC. 5. Operation with the tRAD(max) limit insures that tRAC(max) can be met, tRAD(max) is specified as a reference point only; if tRAD is greater than the specified tRAD(max) limit, then access time is controlled exclusively by tAA. 6. Either tODD or tCDD must be satisfied. 7. Either tDZO or tDZC must be satisfied. 8. VIH (min) and VIL(max) are reference levels for measuring timing of input signals. Also, transition times are measured between VIH(min) and VIL(max). 9. Assume that tRCD<=tRCD(max) and tRAD<=tRAD(max). If tRCD or tRAD is greater than the maximum recommended value shown in this table, tRAC exceeds the value shown. 10. Measured with a load circuit equivalent to 1 TTL loads and 100pF. (VOH = 2.0V, VOL = 0.8V) 11. Assume that tRCD >=tRCD(max) and tRCD + tCAC(max) >= tRAD + tAA(max). 12. Assume that tRAD >=tRAD(max) and tRCD + tCAC(max) <= tRAD + tAA(max). 13. Either tRCH or tRRH must be satisfied for a read cycles. 14. tOFF(max) and tOEZ(max) define the time at which the outputs achieve the open circuit condition and are not referenced to output voltage levels. 15. tWCS, tRWD, tCWD, tAWD and tCPW are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only; if tWCS>=tWCS(min), the cycles is an early write cycle and the data out pin will remain open circuit (high impedance) throughout the entire cycle; if tRWD >=tRWD (min), tCWD >=tCWD (min), and tAWD >=tAWD (min), or t CWD >= t CWD (min), tAWD >= tAWD(min) and tCPW>=tCPW(min), the cycle is a read-modify-write and the data output will contain data read from the selected cell; if neither of the above sets of conditions is satisfied, the condition of the data out (at access time) is indeterminate. 16. These parameters are referenced to CAS leading edge in early write cycles and to WE leading edge in delayed write or read-modify-write cycles. 17. tRASP defines RAS pulse width in Fast page mode cycles. 18. Access time is determined by the longest among tAA or tCAC or tACP. ’01 GM71V16400C GM71VS16400CL 19. In delayed write or read-modify-write cycles, OE must disable output buffer prior to applying data to the device. After RAS is reset, if tOEH>=tCWL, the I/O pin will remain open circuit (high impedance); if tOEH < tCWL, invalid data will be out at each I/O. 20. The 16M DRAM offers a 16-bit time saving parallel test mode. Address CA0 and CA1 for the 4M x 4 are don't care during test mode. Test mode is set by performing a WE-and-CAS-beforeRAS (WCBR) cycle. In 16-bit parallel test mode, data is written into 4 bits in parallel at each I/O (I/O1 to I/O4) and read out from each I/O. If 4 bits of each I/O are equal (all 1s or 0s), data output pin is a high state during test mode read cycle, then the device has passed. If they are not equal, data output pin is a low state, then the device has failed. Refresh during test mode operation can be performed by normal read cycles or by WCBR refresh cycles. To get out of test mode and enter a normal operation mode, perform either a regular CAS-before-RAS refresh cycle or RAS-only refresh cycle. 21. In a test mode read cycle, the value of tRAC, tAA, tCAC and tACP is delayed by 2ns to 5ns for the specified value. These parameters should be specified in test mode cycles by adding the above value to the specified value in this data sheet. Rev 0.1 / Apr’01 GM71V16400C GM71VS16400CL Package Dimension 24(26)pin SOJ Unit: Inches (mm) 0.025(0.64) 0.260(6.60) MIN 0.275(6.99) MAX 0.340(8.64) MAX 0.329(8.38) MIN 0.305(7.75) MAX 0.295(7.49) MIN MIN 0.085(2.16) 0.661(16.80) MIN 0.669(17.00) MAX MIN 0.128(3.25) MIN 0.147(3.75) MAX 0.026(0.66) MIN 0.032(0.81) MAX 0.050(1.27) TYP 0.015(0.38) MIN 0.020(0.50) MAX 24(26)pin TSOP-II 0.670(17.04) MIN 0.678(17.24) MAX 0.004(0.12) MIN 0.008(0.21) MAX 0.037(0.95) MIN 0.041(1.05) MAX 0.047(1.20) MAX 0.012(0.30) MIN 0.020(0.50) MAX Rev 0.1 / Apr’01 0.016(0.40) MIN 0.024(0.60) MAX 0.371(9.42) MAX 0.355(9.02) MIN 0.303(7.72) MAX 0.296(7.52) MIN 0 ~ 5 Deg 0.050(1.27) TYP 0.003(0.08) MIN 0.007(0.18) MAX