TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor Data Manual ADVANCE INFORMATION concerns new products in the sampling or preproduction phase of development. Characteristic data and other specifications are subject to change without notice. Literature Number: SPRS692 November 2010 TMS320C6674 Data Manual SPRS692—November 2010 www.ti.com Release History Release Date Chapter/Topic Description/Comments 1.0 November 2010 All Initial Release 2 Release History Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Contents 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 1.1 KeyStone Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 1.2 Device Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 1.3 Functional Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 2 Device Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 Device Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 DSP Core Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Memory Map Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Boot Modes Supported and PLL Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 2.5.1 Boot Device Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 2.5.2 Device Configuration Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2.5.3 PLL Boot Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Second-Level Bootloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 2.9.1 Development Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 2.9.2 Device Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 3.1 Device Configuration at Device Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 3.2 Peripheral Selection After Device Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 3.3 Device State Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 3.3.1 Device Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 3.3.2 Device Configuration Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 3.3.3 JTAG ID (JTAGID) Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 3.3.4 Kicker Mechanism (KICK0 and KICK1) Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 3.3.5 LRESETNMI PIN Status (LRSTNMIPINSTAT) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 3.3.6 LRESETNMI PIN Status Clear (LRSTNMIPINSTAT_CLR) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 3.3.7 Reset Status (RESET_STAT) Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 3.3.8 Reset Status Clear (RESET_STAT_CLR) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 3.3.9 Boot Complete (BOOTCOMPLETE) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 3.3.10 Power State Control (PWRSTATECTL) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 3.3.11 NMI Even Generation to CorePac (NMIGRx) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 3.3.12 IPC Generation (IPCGRx) Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 3.3.13 IPC Acknowledgement (IPCARx) Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 3.3.14 IPC Generation Host (IPCGRH) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 3.3.15 IPC Acknowledgement Host (IPCARH) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 3.3.16 Timer Input Selection Register (TINPSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 3.3.17 Timer Output Selection Register (TOUTPSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 3.3.18 Reset Mux (RSTMUXx) Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 3.4 Pullup/Pulldown Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 4 System Interconnect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 4.1 4.2 4.3 4.4 5 Internal Buses, Bridges, and Switch Fabrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Data Switch Fabric Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 Configuration Switch Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Bus Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 C66x CorePac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 5.1 Memory Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 5.1.1 L1P Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 5.1.2 L1D Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 5.1.3 L2 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 5.1.4 MSMC SRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 5.1.5 L3 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 5.2 Memory Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Copyright 2010 Texas Instruments Incorporated Contents 3 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 5.3 5.4 5.5 5.6 5.7 6 www.ti.com Bandwidth Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Power-Down Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 C66x CorePac Resets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 C66x CorePac Revision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 C66x CorePac Register Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Device Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 6.1 Absolute Maximum Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 6.2 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 6.3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 7 TMS320C6674 Peripheral Information and Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 7.1 Parameter Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 7.1.1 1.8-V Signal Transition Levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 7.1.2 Timing Parameters and Board Routing Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 7.2 Recommended Clock and Control Signal Transition Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 7.3 Power Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 7.3.1 Power-Supply Sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 7.3.2 Power-Down Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 7.3.3 Power Supply Decoupling and Bulk Capacitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 7.3.4 SmartReflex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 7.4 Enhanced Direct Memory Access (EDMA3) Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 7.4.1 EDMA3 Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 7.4.2 EDMA3 Channel Synchronization Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 7.4.3 EDMA3 Peripheral Register Description(s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 7.5 Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 7.5.1 Interrupt Sources and Interrupt Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 7.5.2 INTC Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 7.5.3 Inter-Processor Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 7.5.4 External Interrupts Electrical Data/Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 7.6 MPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 7.6.1 MPU Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 7.6.2 MPU Programmable Range Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 7.7 Reset Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 7.7.1 Power-on Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 7.7.2 Hard Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 7.7.3 Soft Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 7.7.4 Local Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 7.7.5 Reset Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 7.7.6 Reset Controller Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 7.7.7 Reset Electrical Data / Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 7.8 Main PLL and PLL Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 7.8.1 Main PLL Controller Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 7.8.2 PLL Controller Memory Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 7.8.3 Main PLL Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 7.8.4 Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Electrical Data/Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 7.9 DD3 PLL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 7.9.1 DDR3 PLL Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 7.9.2 DDR3 PLL Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 7.9.3 DDR3 PLL Input Clock Electrical Data/Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 7.10 PASS PLL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 7.10.1 PASS PLL Control Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 7.10.2 PASS PLL Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 7.11 DDR3 Memory Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 7.11.1 DDR3 Memory Controller Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 7.11.2 DDR3 Memory Controller Electrical Data/Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 7.12 I2C Peripheral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 7.12.1 I2C Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 7.12.2 I2C Peripheral Register Description(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 7.12.3 I2C Electrical Data/Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 4 Contents Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor www.ti.com SPRS692—November 2010 7.13 SPI Peripheral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.13.1 SPI Electrical Data/Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.14 HyperLink Peripheral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.15 UART Peripheral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.16 PCIe Peripheral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.17 TSIP Peripheral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.18 EMIF16 Peripheral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.19 Packet Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.20 Security Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.21 Ethernet MAC (EMAC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.22 Management Data Input/Output (MDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.23 Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.23.1 Timers Device-Specific Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.23.2 Timers Electrical Data/Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.24 Serial RapidIO (SRIO) Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.25 General-Purpose Input/Output (GPIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.25.1 GPIO Device-Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.25.2 GPIO Electrical Data/Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.26 Semaphore2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.27 Emulation Features and Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.27.1 Advanced Event Triggering (AET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.27.2 Trace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.27.3 IEEE 1149.1 JTAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 232 232 235 237 238 238 238 239 239 240 241 242 242 242 243 244 244 244 244 245 245 245 246 Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 8.1 Thermal Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 8.2 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 8.3 Package CYP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Copyright 2010 Texas Instruments Incorporated Contents 5 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com List of Figures Figure 1-1 Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5 Figure 2-6 Figure 2-7 Figure 2-8 Figure 2-9 Figure 2-10 Figure 2-11 Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-6 Figure 3-7 Figure 3-8 Figure 3-9 Figure 3-10 Figure 3-11 Figure 3-12 Figure 3-13 Figure 3-14 Figure 3-15 Figure 3-16 Figure 3-17 Figure 4-1 Figure 5-1 Figure 5-2 Figure 5-3 Figure 5-4 Figure 7-1 Figure 7-2 Figure 7-3 Figure 7-4 Figure 7-5 Figure 7-6 Figure 7-7 Figure 7-8 Figure 7-9 Figure 7-10 Figure 7-11 Figure 7-12 Figure 7-13 Figure 7-14 Figure 7-15 Figure 7-16 Figure 7-17 6 Functional Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 TMS320C6674 DSP Core Data Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Boot Mode Pin Decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Sleep / EMIF16 Configuration Bit Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Ethernet (SGMII) Device Configuration Bit Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Serial Rapid I/O Device Configuration Bit Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 PCI Device Configuration Bit Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 I2C Master Mode Device Configuration Bit Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 I2C Passive Mode Device Configuration Bit Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 SPI Device Configuration Bit Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 HyperLink Boot Device Configuration Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 CYP 841-Pin BGA Package Bottom View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Device Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Device Configuration Register (DEVCFG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 JTAG ID (JTAGID) Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 LRESETNMI PIN Status Register (LRSTNMIPINSTAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 LRESETNMI PIN Status Clear Register (LRSTNMIPINSTAT_CLR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Reset Status Register (RESET_STAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Reset Status Clear Register (RESET_STAT_CLR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Boot Complete Register (BOOTCOMPLETE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Power State Control Register (PWRSTATECTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 NMI Generation Register (NMIGRx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 IPC Generation Registers (IPCGRx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 IPC Acknowledgement Registers (IPCARx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 IPC Generation Registers (IPCGRH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 IPC Acknowledgement Register (IPCARH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Timer Input Selection Register (TINPSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Timer Output Selection Register (TOUTPSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Reset Mux Register RSTMUXx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Packed DMA Priority Allocation Register (PKTDMA_PRI_ALLOC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 C66x CorePac Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 TMS320C6674 L1P Memory Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 TMS320C6674 L1D Memory Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 TMS320C6674 L2 Memory Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Test Load Circuit for AC Timing Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Input and Output Voltage Reference Levels for AC Timing Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Rise and Fall Transition Time Voltage Reference Levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Board-Level Input/Output Timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 POR-Controlled Power Sequencing — Core Before IO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 POR-Controlled Power Sequencing — IO Before Core. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 RESETFULL-Controlled Device Initialization — Core Before IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 RESETFULL-Controlled Device Initialization — IO Before Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 SmartReflex 4-Pin VID Interface Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 SmartReflex I2C Interface Receive Timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 SmartReflex I2C Interface Transmit Timings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109 TMS320C6674 Interrupt Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 NMI and Local Reset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187 Configuration Register (CONFIG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 Programmable Range n Start Address Register (PROGn_MPSAR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 Programmable Range n End Address Register (PROGn_MPEAR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 List of Figures Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-18 Figure 7-19 Figure 7-20 Figure 7-21 Figure 7-22 Figure 7-23 Figure 7-24 Figure 7-25 Figure 7-26 Figure 7-27 Figure 7-28 Figure 7-29 Figure 7-30 Figure 7-31 Figure 7-32 Figure 7-33 Figure 7-34 Figure 7-35 Figure 7-36 Figure 7-37 Figure 7-38 Figure 7-39 Figure 7-40 Figure 7-41 Figure 7-42 Figure 7-43 Figure 7-44 Figure 7-45 Figure 7-46 Figure 7-47 Figure 7-48 Figure 7-49 Figure 7-50 Figure 7-51 Figure 7-52 Figure 7-53 Figure 7-54 Figure 7-55 Figure 7-56 Figure 7-57 Figure 7-58 Figure 7-59 Figure 7-60 Figure 7-61 Figure 7-62 Figure 8-1 Power-On Reset Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 Full-Reset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 Hard-Reset Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Soft-Reset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Boot Configuration Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Main PLL and PLL Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 PLL Secondary Control Register (SECCTL)) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213 PLL Controller Divider Register (PLLDIVn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213 PLL Controller Clock Align Control Register (ALNCTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214 PLLDIV Divider Ratio Change Status Register (DCHANGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214 SYSCLK Status Register (SYSTAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215 Reset Type Status Register (RSTYPE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215 Reset Control Register (RSTCTRL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216 Reset Configuration Register (RSTCFG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Reset Isolation Register (RSISO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Main PLL Control Register (MAINPLLCTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220 PLL Transition Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221 DDR3 PLL Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 DDR3 PLL Control Register (DDR3PLLCTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 DDR3 PLL DDRCLK Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223 PASS PLL Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224 PASS PLL Control Register (PASSPLLCTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224 PASS PLL Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225 I2C Module Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228 I2C Receive Timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230 I2C Transmit Timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231 SPI Master Mode Timing Diagrams — Base Timings for 3 Pin Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234 SPI Additional Timings for 4 Pin Master Mode with Chip Select Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234 HyperLink Station Management Clock Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236 HyperLink Station Management Transmit Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236 HyperLink Station Management Receive Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236 UART Receive Timing Waveform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 UART CTS (Clear-to-Send Input) — Autoflow Timing Waveform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 UART Transmit Timing Waveform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 UART RTS (Request-to-Send Output) — Autoflow Timing Waveform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 MACID1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 MACID2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 MDIO Input Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241 MDIO Output Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241 Timer Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243 GPIO Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244 Trace Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246 JTAG Test-Port Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247 HS-RTDX Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247 CYP (S–PBGA–N841) Pb-Free Plastic Ball Grid Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250 Copyright 2010 Texas Instruments Incorporated List of Figures 7 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com List of Tables Table 2-1 Table 2-2 Table 2-3 Table 2-4 Table 2-5 Table 2-6 Table 2-7 Table 2-8 Table 2-9 Table 2-10 Table 2-11 Table 2-12 Table 2-13 Table 2-14 Table 2-15 Table 2-16 Table 2-17 Table 2-18 Table 3-1 Table 3-2 Table 3-3 Table 3-4 Table 3-5 Table 3-6 Table 3-7 Table 3-8 Table 3-9 Table 3-10 Table 3-11 Table 3-12 Table 3-13 Table 3-14 Table 3-15 Table 3-16 Table 3-17 Table 3-18 Table 3-19 Table 4-1 Table 4-2 Table 4-3 Table 5-1 Table 5-2 Table 5-3 Table 5-4 Table 6-1 Table 6-2 Table 6-3 Table 7-1 Table 7-2 Table 7-3 8 List of Tables Characteristics of the TMS320C6674 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Memory Map Summary for TMS320C6674. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Boot Mode Pins: Boot Device Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Sleep / EMIF16 Configuration Bit Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Ethernet (SGMII) Configuration Bit Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Serial Rapid I/O Configuration Bit Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 PCI Device Configuration Bit Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BAR Config / PCIe Window Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 I2C Master Mode Device Configuration Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 I2C Passive Mode Device Configuration Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 SPI Device Configuration Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 HyperLink Boot Device Configuration Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 C66x DSP System PLL Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 I/O Functional Symbol Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Terminal Functions — Signals and Control by Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Terminal Functions — Power and Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Terminal Functions — By Signal Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Terminal Functions — By Ball Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 TMS320C6674 Device Configuration Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Device State Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Device Status Register Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Device Configuration Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 JTAG ID Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 LRESETNMI PIN Status Register (LRSTNMIPINSTAT) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 LRESETNMI PIN Status Clear Register (LRSTNMIPINSTAT_CLR) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Reset Status Register (RESET_STAT) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Reset Status Clear Register (RESET_STAT_CLR) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Boot Complete Register (BOOTCOMPLETE) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Power State Control Register (PWRSTATECTL) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 NMI Generation Register (NMIGRx) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 IPC Generation Registers (IPCGRx) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 IPC Acknowledgement Registers (IPCARx) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 IPC Generation Registers (IPCGRH) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 IPC Acknowledgement Register (IPCARH) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Timer Input Selection Field Description (TINPSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Timer Output Selection Field Description (TOUTPSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Reset Mux Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 DSP/2 Data SCR Connection Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 DSP/3 Data SCR Connection Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 Packed DMA Priority Allocation Register (PKTDMA_PRI_ALLOC) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Available Memory Page Protection Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 C66x CorePac Reset (Global or Local) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 CorePac Revision ID Register (MM_REVID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 CorePac Revision ID Register (MM_REVID) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Absolute Maximum Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 Board-Level Timing Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Power Supply Rails on TMS320C6674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 POR-Controlled Power Sequencing — Core Before IO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-4 Table 7-5 Table 7-6 Table 7-7 Table 7-8 Table 7-9 Table 7-10 Table 7-11 Table 7-12 Table 7-13 Table 7-14 Table 7-15 Table 7-16 Table 7-17 Table 7-18 Table 7-19 Table 7-20 Table 7-21 Table 7-22 Table 7-23 Table 7-24 Table 7-25 Table 7-26 Table 7-27 Table 7-28 Table 7-29 Table 7-30 Table 7-31 Table 7-32 Table 7-33 Table 7-34 Table 7-35 Table 7-36 Table 7-37 Table 7-38 Table 7-39 Table 7-40 Table 7-41 Table 7-42 Table 7-43 Table 7-44 Table 7-45 Table 7-46 Table 7-47 Table 7-48 Table 7-49 Table 7-50 Table 7-51 Table 7-52 Table 7-53 Table 7-54 Table 7-55 Table 7-56 Table 7-57 POR-Controlled Power Sequencing — IO Before Core. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 RESETFULL-Controlled Device Initialization — Core Before IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 RESETFULL-Controlled Device Initialization — IO Before Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Clock Sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 SmartReflex 4-Pin VID Interface Switching Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 SmartReflex I2C Interface Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 SmartReflex I2C Interface Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 EDMA3 Parameter RAM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 TPCC0 Events for C6674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 TPCC1 Events for C6674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 TPCC3 Events for C6674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 EDMA3 Channel Controller 0 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 EDMA3 Channel Controller 1 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 EDMA3 Channel Controller 2 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139 EDMA3 Channel Controller 0 Parameter RAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 EDMA3 Channel Controller 1 Parameter RAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 EDMA3 Channel Controller 2 Parameter RAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 EDMA3 TPCC0 Transfer Controller 0 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 EDMA3 TPCC0 Transfer Controller 1 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 EDMA3 TPCC 1 Transfer Controller 0 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156 EDMA3 TPCC1 Transfer Controller 1 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 EDMA3 TPCC1 Transfer Controller 2 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 EDMA3 TPCC1 Transfer Controller 3 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 EDMA3 TPCC2 Transfer Controller 0 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 EDMA3 TPCC2 Transfer Controller 1 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 EDMA3 TPCC2 Transfer Controller 2 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 EDMA3 TPCC2 Transfer Controller 3 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 TMS320C6674 System Event Mapping — C66x CorePac Primary Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 INTC0 Event Inputs (Secondary Interrupts for C66x CorePacs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 INTC2 Event Inputs (Secondary Events for TPCC1 and TPCC2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 INTC3 Event Inputs (Secondary Events for TPCC0 and HyperLink) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 INTC0/INTC1 Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 INTC2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 INTC3 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 IPC Generation Registers (IPCGRx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 NMI and Local Reset Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187 MPU Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 MPU Memory Regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Device Master Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 MPU0 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 MPU1 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 MPU2 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 MPU3 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192 Configuration Register (CONFIG) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU0) . . . . . . . . . . . . . . . . . . . . . . . .194 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU1) . . . . . . . . . . . . . . . . . . . . . . . .195 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU2) . . . . . . . . . . . . . . . . . . . . . . . .195 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU3) . . . . . . . . . . . . . . . . . . . . . . . .196 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU0). . . . . . . . . . . . . . . . . . . . . . . . .196 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU1) . . . . . . . . . . . . . . . . . . . . . . . .197 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU2). . . . . . . . . . . . . . . . . . . . . . . . .197 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU3) . . . . . . . . . . . . . . . . . . . . . . . .198 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) Field Descriptions . . . . . . . . . . . .199 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) Reset Values . . . . . . . . . . . . . . . . .201 Copyright 2010 Texas Instruments Incorporated List of Tables 9 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-58 Table 7-59 Table 7-60 Table 7-61 Table 7-62 Table 7-63 Table 7-64 Table 7-65 Table 7-66 Table 7-67 Table 7-68 Table 7-69 Table 7-70 Table 7-71 Table 7-72 Table 7-73 Table 7-74 Table 7-75 Table 7-76 Table 7-77 Table 7-78 Table 7-79 Table 7-80 Table 7-81 Table 7-82 Table 7-83 Table 7-84 Table 7-85 Table 7-86 Table 7-87 Table 7-88 Table 7-89 Table 7-90 Table 7-91 Table 7-92 Table 7-93 Table 7-94 Table 7-95 Table 7-96 Table 7-97 Table 7-98 Table 7-99 Table 8-1 10 www.ti.com Reset Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202 Reset Timing Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Reset Switching Characteristics Over Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 Boot Configuration Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Main PLL Stabilization, Lock, and Reset Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 PLL Controller Registers (Including Reset Controller). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212 PLL Secondary Control Register (SECCTL) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213 PLL Controller Divider Register (PLLDIVn) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213 PLL Controller Clock Align Control Register (ALNCTL) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214 PLLDIV Divider Ratio Change Status Register (DCHANGE) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215 SYSCLK Status Register (SYSTAT) Field Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215 Reset Type Status Register (RSTYPE) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216 Reset Control Register (RSTCTRL) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216 Reset Configuration Register (RSTCFG) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Reset Isolation Register (RSISO) Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Main PLL Control Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219 DDR3 PLL Control Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 DDR3 PLL DDRREFCLK(N|P) Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223 PASS PLL Control Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224 PASS PLL Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225 I2C Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228 I2C Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229 I2C Switching Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230 SPI Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232 SPI Switching Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232 HyperLink Peripheral Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 HyperLink Peripheral Switching Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 UART Timing Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 UART Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 MACID1 Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 MACID2 Register Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 MDIO Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241 MDIO Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241 Timer Input Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242 Timer Output Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242 GPIO Input Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244 GPIO Output Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244 Trace Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245 JTAG Test Port Timing Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246 JTAG Test Port Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246 HS-RTDX Switching Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247 Thermal Resistance Characteristics (PBGA Package) [CMH/GMH] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249 List of Tables Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com • Four TMS320C66x™ DSP Core Subsystems (C66x CorePacs), Each with – 1.25 GHz C66x Fixed/Floating-Point CPU Core › 40 GMAC/Core for Fixed Point @ 1.25 GHz › 20 GFLOP/Core for Floating Point @ 1.25 GHz – Memory › 32K Byte L1P Per Core › 32K Byte L1D Per Core › 512K Byte Local L2 Per Core – – • Multicore Shared Memory Controller (MSMC) – 4096 KB MSM SRAM Memory Shared by Four DSP C66x CorePacs – Memory Protection Unit for Both MSM SRAM and DDR3_EMIF – • Multicore Navigator – 8192 Multipurpose Hardware Queues with Queue Manager – Packet-Based DMA for Zero-Overhead Transfers – • Network Coprocessors – Packet Accelerator Enables Support for › Transport Plane IPsec, GTP-U, SCTP, PDCP › L2 User Plane PDCP (RoHC, Air Ciphering) › 1 Gbps Wire Speed Throughput at 1.5M Packets Per Second – Security Accelerator Engine Enables Support for › IPSec, SRTP, 3GPP, WiMAX Air Interface, and SSL/TLS Security › ECB, CBC, CTR, F8, A5/3, CCM, GCM, HMAC, CMAC, GMAC, AES, DES, 3DES, Kasumi, SNOW 3G, SHA-1, SHA-2 (256-bit Hash), MD5 › Up to 2.8 Gbps Encryption Speed – • Peripherals – Four Lanes of SRIO 2.1 › 1.24/2.5/3.125/5 GBaud Operation Supported Per Lane – – – – – – – – › Supports Direct I/O, Message Passing › Supports Four 1×, Two 2×, One 4×, and Two 1x + One 2x Link Configurations Two Lanes PCIe Gen2 › Supports Up To 5 GBaud Per Lane HyperLink › Supports Connections to Other KeyStone Architecture Devices Providing Resource Scalability › Supports up to 50 Gbaud Ethernet MAC Subsystem (EMAC) › Two SGMII Ports › Supports 10/100/1000 Mbps operation 64-Bit DDR3 Interface (DDR3-1600) › 8G Byte Addressable Memory Space 16-Bit EMIF › Support For Up To 256MB NAND Flash and 16MB NOR Flash › Support For Asynchronous SRAM up to 1MB Two Telecom Serial Ports (TSIP) › Supports 1024 DS0s Per TSIP › Supports 2/4/8 Lanes at 32.768/16.384/8.192 Mbps Per Lane UART Interface 2 I C Interface 16 GPIO Pins SPI Interface Semaphore Module Eight 64-Bit Timers Three On-Chip PLLs • Commercial Temperature: – 0°C to 100°C • Extended Temperature: – - 40°C to 105°C Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION 1 Features TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 1.1 KeyStone Architecture TI’s KeyStone Multicore Architecture provides a high performance structure for integrating RISC and DSP cores with application specific coprocessors and I/O. KeyStone is the first of its kind that provides adequate internal bandwidth for nonblocking access to all processing cores, peripherals, coprocessors, and I/O. This is achieved with four main hardware elements: Multicore Navigator, TeraNet, Multicore Shared Memory Controller, and HyperLink. ADVANCE INFORMATION Multicore Navigator is an innovative packet-based manager that controls 8192 queues. When tasks are allocated to the queues, Multicore Navigator provides hardware-accelerated dispatch that directs tasks to the appropriate available hardware. The packet-based system on a chip (SoC) uses the two Tbps capacity of the TeraNet switched central resource to move packets. The Multicore Shared Memory Controller enables processing cores to access shared memory directly without drawing from TeraNet’s capacity, so packet movement cannot be blocked by memory access. HyperLink provides a 50-Gbps chip-level interconnect that allows SoCs to work in tandem. Its low-protocol overhead and high throughput make Hyperlink an ideal interface for chip-to-chip interconnections. Working with Multicore Navigator, HyperLink dispatches tasks to tandem devices transparently and executes tasks as if they are running on local resources. 1.2 Device Description The TMS320C6674 DSP is a highest-performance fixed/floating-point DSP that is based on TI's KeyStone multicore architecture. Integrated with the new and innovative C66x DSP core, this device can run at a core speed of up to 1.25 GHz. For developers of a broad range of applications, such as mission critical, medical imaging, test and automation and other applications requiring high performance, TI's TMS320C6674 DSP offers 5 GHz cumulative DSP and enables a platform that is power efficient and easy to use. In addition, it is fully backward compatible with all existing C6000 family of fixed and floating point DSPs. TI's Keystone architecture provides a programmable platform integrating various subsystems (C66x cores, Memory subsystem, Peripherals and accelerators) and uses several innovative components and techniques to maximize intra device and inter device communication that allows the various DSP resources to operate efficiently and seamlessly. Central to this architecture are key components such as Multicore navigator that allow for efficient data management between the various chip components, Teranet switch fabric that is a 2 TB non-blocking switch fabric enabling fast and contention free internal data movement, as well as the Multicore shared memory controller that allows access to shared and external memory directly without drawing from switch fabric capacity. For fixed point use, the C66x core has 4X the multiply accumulate (MAC) capability of current generation C64x+ cores. In addition, the C66x core integrates floating point capability and the per core raw computational performance is an industry-leading 32 MACS/cycle and 16 flops/cycle. It can execute 8 single precision floating point MAC operations per cycle and can perform double and mixed precision operations and is IEEE754 compliant. The C66x core incorporates 90 new instructions targeted for floating point and vector math oriented processing, compared to the C64x+ core. These enhancements yield sizeable performance improvements in popular DSP kernels used in signal processing, mathematical, and image acquisition functions. The C66x core is backwards code compatible with TI's previous generation C6000 fixed and floating point DSP cores, ensuring software portability and shortened software development cycles for applications migrating to faster hardware. The C6674 DSP integrates a large amount of on-chip memory. In addition to 32KB of L1 program and data cache, there is 512KB of dedicated memory per core that can be configured as mapped RAM or cache. The device also integrates 4096KB of Multicore Shared Memory that can be used as a shared L2 SRAM and/or shared L3 SRAM. All L2 memories incorporate error detection and error correction. For fast access to external memory this device includes 64 bit DDR-3 running at 1600MHz and has ECC DRAM support. 12 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor www.ti.com SPRS692—November 2010 The C6674 device has a complete set of development tools, which includes: an enhanced C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows® debugger interface for visibility into source code execution. Copyright 2010 Texas Instruments Incorporated 13 ADVANCE INFORMATION This family supports a plethora of high speed standard interfaces including RapidIO ver 2, PCI Express Gen2 and Gigabit Ethernet, as well as an integrated Ethernet switch. It also includes I2C, UART, Telecom Serial Port (TSIP) and a 16 bit EMIF interface, along with general purpose CMOS IO. For high throughput, low latency communication between devices or with an FPGA, this device also sports a 50Gbps FD interface called Hyperlink. Adding to the network awareness of this device is a network co-processor which includes both packet and optional security acceleration. The packet accelerator can process up to 1.5 M packets/s and enables a single IP address to be used for the entire multicore C6674 device. It also provides L2 to L4 classification, along with checksum and QoS capabilities. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 1.3 Functional Block Diagram Figure 1-1 shows the functional block diagram of the TMS320C6674 device. Figure 1-1 Functional Block Diagram C6674 Memory Subsystem 4MB MSM SRAM 64-Bit DDR3 EMIF C66x™ CorePac C66x™ CorePac 32KB L1 32KB L1 C66x™P-Cache D-Cache 512KB L2 Cache CorePac 32KB L1 32KB L1 C66x™P-Cache D-Cache 512KB L2 Cache CorePac 32KB L1 32KB L1 MSMC ADVANCE INFORMATION Debug & Trace Boot ROM Semaphore Power Management P-Cache PLL 512KB L2 Cache 32KB L1 D-Cache 32KB L1 P-Cache ´3 D-Cache 512KB L2 Cache EDMA ´3 4 Cores @ up to 1.25 GHz TeraNet HyperLink Multicore Navigator 14 Switch Ethernet Switch ´4 SRIO SGMII ´2 ´2 TSIP SPI UART ´2 PCIe I2C GPIO EMIF 16 Queue Manager Packet DMA Security Accelerator Packet Accelerator Network Coprocessor Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2 Device Overview 2.1 Device Characteristics Table 2-1 provides an overview of the TMS320C6674 DSP. The table shows significant features of the device, including the capacity of on-chip RAM, the peripherals, the DSP frequency, and the package and pin count. Characteristics of the TMS320C6674 Processor HARDWARE FEATURES Peripherals 1 EDMA3 (16 independent channels) [DSP/2 clock rate] 1 EDMA3 (64 independent channels) [DSP/3 clock rate] 2 High-speed 1×/2x/4× Serial RapidIO Port (4 lanes) 1 PCIe (2 lanes) 1 10/100/1000 Ethernet MAC (EMAC) 2 Management Data Input/Output (MDIO) 1 HyperLink 1 EMIF16 1 TSIP 2 SPI 1 UART 1 2 Accelerators TMS320C6674 DDR3 Memory Controller (64-bit bus width) [1.5 V I/O] (clock source = DDRREFCLKN|P) IC 1 64-Bit Timers (Configurable) (internal clock source = DSP/6 clock frequency) 8 64-bit (each configurable as 2 32-bit timers) General-Purpose Input/Output Port (GPIO) 16 Packet Accelerator 1 Security Accelerator ADVANCE INFORMATION Table 2-1 (1) Size (Bytes) 1 6528KB 128KB L1 Program Memory [SRAM/Cache] On-Chip Memory 128KB L1 Data Memory [SRAM/Cache] Organization 2048KB L2 Unified Memory/Cache 4096KB MSM SRAM 128KB L3 ROM C66x CorePac Revision ID CorePac Revision ID Register (address location: 0181 2000h) See Section 5.6 ‘‘C66x CorePac Revision’’ on page 89. JTAG BSDL_ID JTAGID register (address location: 0262 0018h) See Section 3.3.3 ‘‘JTAG ID (JTAGID) Register Description’’ on page 65 Frequency MHz Cycle Time Voltage 1250 (1.25 GHz) 1000 (1.0 GHz) ns 1 ns Core (V) SmartReflex variable supply I/O (V) 1.0 V, 1.5 V, and 1.8 V Process Technology μm 0.040 μm Product Status (2) Product Preview (PP), Advance Information (AI), or Production Data (PD) PP End of Table 2-1 1 The Crypto Accelerator function is subject to export control and will be enabled only for approved device shipments. 2 PRODUCT PREVIEW information concerns experimental products (designated as TMX) that are in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. Copyright 2010 Texas Instruments Incorporated Device Overview 15 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.2 DSP Core Description ADVANCE INFORMATION The C66x Digital Signal Processor (DSP) extends the performance of the C64x+ and C674x DSPs through enhancements and new features. Many of the new features target increased performance for vector processing. The C64x+ and C674x DSPs support 2-way SIMD operations for 16-bit data and 4-way SIMD operations for 8-bit data. On the C66x DSP, the vector processing capability is improved by extending the width of the SIMD instructions. C66x DSPs can execute instructions that operate on 128-bit vectors. For example the QMPY32 instruction is able to perform the element-to-element multiplication between two vectors of four 32-bit data each. The C66x DSP also supports SIMD for floating-point operations. Improved vector processing capability (each instruction can process multiple data in parallel) combined with the natural instruction level parallelism of C6000 architecture (e.g execution of up to 8 instructions per cycle) results in a very high level of parallelism that can be exploited by DSP programmers through the use of TI's optimized C/C++ compiler. The C66x DSP consists of eight functional units, two register files, and two data paths as shown in Figure 2-1. The two general-purpose register files (A and B) each contain 32 32-bit registers for a total of 64 registers. The general-purpose registers can be used for data or can be data address pointers. The data types supported include packed 8-bit data, packed 16-bit data, 32-bit data, 40-bit data, and 64-bit data. Multiplies also support 128-bit data. 40-bit-long or 64-bit-long values are stored in register pairs, with the 32 LSBs of data placed in an even register and the remaining 8 or 32 MSBs in the next upper register (which is always an odd-numbered register). 128-bit data values are stored in register quadruplets, with the 32 LSBs of data placed in a register that is a multiple of 4 and the remaining 96 MSBs in the next 3 upper registers. The eight functional units (.M1, .L1, .D1, .S1, .M2, .L2, .D2, and .S2) are each capable of executing one instruction every clock cycle. The .M functional units perform all multiply operations. The .S and .L units perform a general set of arithmetic, logical, and branch functions. The .D units primarily load data from memory to the register file and store results from the register file into memory. Each C66x .M unit can perform one of the following fixed-point operations each clock cycle: four 32 × 32 bit multiplies, sixteen 16 × 16 bit multiplies, four 16 × 32 bit multiplies, four 8 × 8 bit multiplies, four 8 × 8 bit multiplies with add operations, and four 16 × 16 multiplies with add/subtract capabilities. There is also support for Galois field multiplication for 8-bit and 32-bit data. Many communications algorithms such as FFTs and modems require complex multiplication. Each C66x .M unit can perform one 16 × 16 bit complex multiply with or without rounding capabilities, two 16 × 16 bit complex multiplies with rounding capability, and a 32 × 32 bit complex multiply with rounding capability. The C66x can also perform two 16 × 16 bit and one 32 × 32 bit complex multiply instructions that multiply a complex number with a complex conjugate of another number with rounding capability. Communication signal processing also requires an extensive use of matrix operations. Each C66x .M unit is capable of multiplying a [1 × 2] complex vector by a [2 × 2] complex matrix per cycle with or without rounding capability. A version also exists allowing multiplication of the conjugate of a [1 × 2] vector with a [2 × 2] complex matrix. Each C66x .M unit also includes IEEE floating-point multiplication operations from the C674x DSP, which includes one single-precision multiply each cycle and one double-precision multiply every 4 cycles. There is also a mixed-precision multiply that allows multiplication of a single-precision value by a double-precision value and an operation allowing multiplication of two single-precision numbers resulting in a double-precision number. The C66x DSP improves the performance over the C674x double-precision multiplies by adding a instruction allowing one double-precision multiply per cycle and also reduces the number of delay slots from 10 down to 4. Each C66x .M unit can also perform one the following floating-point operations each clock cycle: one, two, or four single-precision multiplies or a complex single-precision multiply. The .L and .S units can now support up to 64-bit operands. This allows for new versions of many of the arithmetic, logical, and data packing instructions to allow for more parallel operations per cycle. Additional instructions were added yielding performance enhancements of the floating point addition and subtraction instructions, including the ability to perform one double precision addition or subtraction per cycle. Conversion to/from integer and single-precision values can now be done on both .L and .S units on the C66x. Also, by taking advantage of the larger 16 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor www.ti.com SPRS692—November 2010 operands, instructions were also added to double the number of these conversions that can be done. The .L unit also has additional instructions for logical AND and OR instructions, as well as, 90 degree or 270 degree rotation of complex numbers (up to two per cycle). Instructions have also been added that allow for the computing the conjugate of a complex number. • • • • • • Cache line fills Writes from L1D to L2 or from the CorePac to MSMC and/or other system endpoints Victim write backs Block or global coherence operations Cache mode changes Outstanding XMC prefetch requests This is useful as a simple mechanism for programs to wait for these requests to reach their endpoint. It also provides ordering guarantees for writes arriving at a single endpoint via multiple paths, multiprocessor algorithms that depend on ordering, and manual coherence operations. For more details on the C66x DSP and its enhancements over the C64x+ and C674x architectures, see the following documents: • C66x CPU and Instruction Set Reference Guide (literature number SPRUGH7) • C66x DSP Cache User Guide (literature number SPRUGY8) • C66x CorePac User Guide (literature number SPRUGW0) Copyright 2010 Texas Instruments Incorporated Device Overview 17 ADVANCE INFORMATION The MFENCE instruction is a new instruction introduced on the C66x DSP. This instruction will create a DSP stall until the completion of all the DSP-triggered memory transactions, including: TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 2-1 shows the DSP core functional units and data paths. Figure 2-1 TMS320C6674 DSP Core Data Paths Note: Default bus width is 64 bits (i.e. a register pair) src1 .L1 Register File A (A0, A1, A2, ...A31) src2 dst ST1 src1 .S1 src2 ADVANCE INFORMATION dst src1 src1_hi Data Path A .M1 src2 src2_hi dst2 dst1 LD1 32 src1 DA1 32 .D1 dst 32 src2 32 32 2´ 1´ src2 DA2 32 .D2 dst src1 Register File B (B0, B1, B2, ...B31) 32 32 32 32 32 LD2 dst1 dst2 src2_hi .M2 src2 src1_hi src1 Data Path B dst .S2 src2 src1 ST2 dst .L2 src2 src1 32 Control Register 32 18 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.3 Memory Map Summary Table 2-2 shows the memory map address ranges of the TMS320C6674 device. Table 2-2 Memory Map Summary for TMS320C6674 (Part 1 of 7) Start End Bytes Description 00000000 007FFFFF 8M Reserved 00800000 0087FFFF 512K Local L2 SRAM 00880000 00DFFFFF 5M+512K Reserved 00E00000 00E07FFF 32K Local L1P SRAM 00E08000 00EFFFFF 1M-32K Reserved 00F00000 00F07FFF 32K L1D SRAM 00F08000 017FFFFF 9M-32K Reserved 01800000 01BFFFFF 4M C66x CorePac Registers 01C00000 01CFFFFF 1M Reserved 01D00000 01D0007F 128 Tracer 0 01D00080 01D07FFF 32K-128 Reserved 01D08000 01D0807F 128 Tracer 1 01D08080 01D0FFFF 32K-128 Reserved 01D10000 01D1007F 128 Tracer 2 01D10080 01D17FFF 32K-128 Reserved 01D18000 01D1807F 128 Tracer3 01D18080 01D1FFFF 32K-128 Reserved 01D20000 01D2007F 128 Tracer 4 01D20080 01D27FFF 32K-128 Reserved 01D28000 01D2807F 128 Tracer 5 01D28080 01D2FFFF 32K-128 Reserved 01D30000 01D3007F 128 Tracer 6 01D30080 01D37FFF 32K-128 Reserved 01D38000 01D3807F 128 Tracer 7 01D38080 01D3FFFF 32K-128 Reserved 01D40000 01D4007F 128 Tracer 8 01D40080 01D47FFF 32K-128 Reserved 01D48000 01D4807F 128 Tracer 9 01D48080 01D4FFFF 32K-128 Reserved 01D50000 01D5007F 128 Tracer 10 01D50080 01D57FFF 32K-128 Reserved 01D58000 01D5807F 128 Tracer 11 01D58080 01D5FFFF 32K-128 Reserved 01D60000 01D6007F 128 Tracer 12 01D60080 01D67FFF 32K-128 Reserved 01D68000 01D6807F 128 Tracer 13 01D68080 01D6FFFF 32K-128 Reserved 01D70000 01D7007F 128 Tracer 14 01D70080 01D77FFF 32K-128 Reserved 01D78000 01D7807F 128 Tracer 15 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Address Device Overview 19 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-2 www.ti.com Memory Map Summary for TMS320C6674 (Part 2 of 7) Address Start End Bytes Description 01D78080 01D7FFFF 32K-128 Reserved 01D80000 01D8007F 128 Tracer 16 01D80080 01DFFFFF 512K-128 Reserved 01E00000 01E3FFFF 256K Telecom Serial Interface Port (TSIP) 0 01E40000 01E7FFFF 256K Reserved 01E80000 01EBFFFF 256K Telecom Serial Interface Port (TSIP) 1 ADVANCE INFORMATION 01EC0000 01FFFFFF 1M +256K Reserved 02000000 0209FFFF 640K Packet Accelerator Subsystem Configuration 020A0000 021FFFFF 1M + 384K Reserved 02200000 0220007F 128 Timer0 02200080 0220FFFF 64K-128 Reserved 02210000 0221007F 128 Timer1 02210080 0221FFFF 64K-128 Reserved 02220000 0222007F 128 Timer2 02220080 0222FFFF 64K-128 Reserved 02230000 0223007F 128 Timer3 02230080 0223FFFF 64K-128 Reserved 02240000 0224007F 128 Timer4 02240080 0224FFFF 64K-128 Reserved 02250000 0225007F 128 Timer5 02250080 0225FFFF 64K-128 Reserved 02260000 0226007F 128 Timer6 02260080 0226FFFF 64K-128 Reserved 02270000 0227007F 128 Timer7 02270080 0227FFFF 64K-128 Reserved 02280000 0228007F 128 Reserved 02280080 0228FFFF 64K-128 Reserved 02290000 0229007F 128 Reserved 02290080 0229FFFF 64K-128 Reserved 022A0000 022A007F 128 Reserved 022A0080 022AFFFF 64K-128 Reserved 022B0000 022B007F 128 Reserved 022B0080 022BFFFF 64K-128 Reserved 022C0000 022C007F 128 Reserved 022C0080 022CFFFF 64K-128 Reserved 022D0000 022D007F 128 Reserved 022D0080 022DFFFF 64K-128 Reserved 022E0000 022E007F 128 Reserved 022E0080 022EFFFF 64K-128 Reserved 022F0000 022F007F 128 Reserved 022F0080 022FFFFF 64K-128 Reserved 02300000 0230FFFF 64K Reserved 02310000 023101FF 512 PLL Controller 20 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-2 Memory Map Summary for TMS320C6674 (Part 3 of 7) End Bytes Description 02310200 0231FFFF 64K-512 Reserved 02320000 023200FF 256 GPIO 02320100 0232FFFF 64K-256 Reserved 02330000 023303FF 1K SmartRlex 02330400 0234FFFF 127K Reserved 02350000 02350FFF 4K Power Sleep Controller (PSC) 02351000 0235FFFF 64K-4K Reserved 02360000 023603FF 1K Memory Protection Unit (MPU) 0 02360400 02367FFF 31K Reserved 02368000 023683FF 1K Memory Protection Unit (MPU) 1 02368400 0236FFFF 31K Reserved 02370000 023703FF 1K Memory Protection Unit (MPU) 2 02370400 02377FFF 31K Reserved 02378000 023783FF 1K Memory Protection Unit (MPU) 3 02378400 0237FFFF 31K Reserved 02380000 0243FFFF 768K Reserved 02440000 02443FFF 16K DSP Trace Formatter 0 02444000 0244FFFF 48K Reserved 02450000 02453FFF 16K DSP Trace Formatter 1 02454000 0245FFFF 48K Reserved 02460000 02463FFF 16K DSP Trace Formatter 2 02464000 0246FFFF 48K Reserved 02470000 02473FFF 16K DSP Trace Formatter 3 02474000 0247FFFF 48K Reserved 02480000 02483FFF 16K Reserved 02484000 0248FFFF 48K Reserved 02490000 02493FFF 16K Reserved 02494000 0249FFFF 48K Reserved 024A0000 024A3FFF 16K Reserved 024A4000 024AFFFF 48K Reserved 024B0000 024B3FFF 16K Reserved 024B4000 024BFFFF 48K Reserved 024C0000 0252FFFF 448K Reserved 02530000 0253007F 128 I2C Data & Control 02530080 0253FFFF 64K-128 Reserved 02540000 0254003F 64 UART 02540400 0254FFFF 64K-64 Reserved 02550000 025FFFFF 704K Reserved 02600000 02601FFF 8K Secondary Interrupt Controller (INTC) 0 02602000 02603FFF 8K Reserved 02604000 02605FFF 8K Reserved 02606000 02607FFF 8K Reserved 02608000 02609FFF 8K Secondary Interrupt Controller (INTC) 2 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Address Start Device Overview 21 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-2 www.ti.com Memory Map Summary for TMS320C6674 (Part 4 of 7) Address Start End Bytes Description 0260A000 0260BFFF 8K Reserved 0260C000 0260DFFF 8K Secondary Interrupt Controller (INTC) 3 0260E000 0261FFFF 72K Reserved 02620000 026207FF 2K Chip-Level Registers (boot cfg) 02620800 0263FFFF 126K Reserved 02640000 026407FF 2K Semaphore ADVANCE INFORMATION 02640800 0264FFFF 64K-2K Reserved 02650000 026FFFFF 704K Reserved 02700000 02707FFF 32K EDMA Channel Controller (TPCC) 0 02708000 0271FFFF 96K Reserved 02720000 02727FFF 32K EDMA Channel Controller (TPCC) 1 02728000 0273FFFF 96K Reserved 02740000 02747FFF 32K EDMA Channel Controller (TPCC) 2 02748000 0275FFFF 96K Reserved 02760000 027603FF 1K EDMA TPCC0 Transfer Controller (TPTC) 0 02760400 02767FFF 31K Reserved 02768000 027683FF 1K EDMA TPCC0 Transfer Controller (TPTC) 1 02768400 0276FFFF 31K Reserved 02770000 027703FF 1K EDMA TPCC1 Transfer Controller (TPTC) 0 02770400 02777FFF 31K Reserved 02778000 027783FF 1K EDMA TPCC1 Transfer Controller (TPTC) 1 02780400 0277FFFF 31K Reserved 02780000 027803FF 1K EDMA TPCC1 Transfer Controller (TPTC) 2 02780400 02787FFF 31K Reserved 02788000 027883FF 1K EDMA TPCC1Transfer Controller (TPTC) 3 02788400 0278FFFF 31K Reserved 02790000 027903FF 1K EDMA TPCC2 Transfer Controller (TPTC) 0 02790400 02797FFF 31K Reserved 02798000 027983FF 1K EDMA TPCC2 Transfer Controller (TPTC) 1 02798400 0279FFFF 31K Reserved 027A0000 027A03FF 1K EDMA TPCC2 Transfer Controller (TPTC) 2 027A0400 027A7FFF 31K Reserved 027A8000 027A83FF 1K EDMA TPCC2 Transfer Controller (TPTC) 3 027A8400 027AFFFF 31K Reserved 027B0000 027CFFFF 128K Reserved 027D0000 027D3FFF 16K TI Embedded Trace Buffer (TETB) core 0 027D4000 027DFFFF 48K Reserved 027E0000 027E3FFF 16K TI Embedded Trace Buffer (TETB) core 1 027E4000 027EFFFF 48K Reserved 027F0000 027F3FFF 16K TI Embedded Trace Buffer (TETB) core 2 027F4000 027FFFFF 48K Reserved 02800000 02803FFF 16K TI Embedded Trace Buffer (TETB) core 3 02804000 0280FFFF 48K Reserved 22 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-2 Memory Map Summary for TMS320C6674 (Part 5 of 7) End Bytes Description 02810000 02813FFF 16K Reserved 02814000 0281FFFF 48K Reserved 02820000 02823FFF 16K Reserved 02824000 0282FFFF 48K Reserved 02830000 02833FFF 16K Reserved 02834000 0283FFFF 48K Reserved 02840000 02843FFF 16K Reserved 02844000 0284FFFF 48K Reserved 02850000 02857FFF 32K TI Embedded Trace Buffer (TETB) — system 02858000 0285FFFF 32K Reserved 02860000 028FFFFF 640K Reserved 02900000 02907FFF 32K Serial RapidIO (SRIO) Configuration 02908000 029FFFFF 1M-32K Reserved 02A00000 02BFFFFF 2M Queue Manager Subsystem Configuration 02C00000 07FFFFFF 84M Reserved 08000000 0800FFFF 64K Extended Memory Controller (XMC) Configuration 08010000 0BBFFFFF 60M-64K Reserved 0BC00000 0BCFFFFF 1M Multicore Shared Memory Controller (MSMC) Config 0BD00000 0BFFFFFF 3M Reserved 0C000000 0C3FFFFF 4M Multicore Shared Memory 0C400000 107FFFFF 68 M Reserved 10800000 1087FFFF 512K Core0 L2 SRAM 10880000 108FFFFF 512K Reserved 10900000 10DFFFFF 5M Reserved 10E00000 10E07FFF 32K Core0 L1P SRAM 10E08000 10EFFFFF 1M-32K Reserved 10F00000 10F07FFF 32K Core0 L1D SRAM 10F08000 117FFFFF 9M-32K Reserved 11800000 1187FFFF 512K Core1 L2 SRAM 11880000 118FFFFF 512K Reserved 11900000 11DFFFFF 5M Reserved 11E00000 11E07FFF 32K Core1 L1P SRAM 11E08000 11EFFFFF 1M-32K Reserved 11F00000 11F07FFF 32K Core1 L1D SRAM 11F08000 127FFFFF 9M-32K Reserved 12800000 1287FFFF 512K Core2 L2 SRAM 12880000 128FFFFF 512K Reserved 12900000 12DFFFFF 5M Reserved 12E00000 12E07FFF 32K Core2 L1P SRAM 12E08000 12EFFFFF 1M-32K Reserved 12F00000 12F07FFF 32K Core2 L1D SRAM 12F08000 137FFFFF 9M-32K Reserved 13800000 1387FFFF 512K Core3 L2 SRAM Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Address Start Device Overview 23 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-2 www.ti.com Memory Map Summary for TMS320C6674 (Part 6 of 7) Address ADVANCE INFORMATION Start End Bytes Description 13880000 138FFFFF 512K Reserved 13900000 13DFFFFF 5M Reserved 13E00000 13E07FFF 32K Core3 L1P SRAM 13E08000 13EFFFFF 1M-32K Reserved 13F00000 13F07FFF 32K Core3 L1D SRAM 13F08000 147FFFFF 9M-32K Reserved 14800000 1487FFFF 512K Reserved 14880000 148FFFFF 512K Reserved 14900000 14DFFFFF 5M Reserved 14E00000 14E07FFF 32K Reserved 14E08000 14EFFFFF 1M-32K Reserved 14F00000 14F07FFF 32K Reserved 14F08000 157FFFFF 9M-32K Reserved 15800000 1587FFFF 512K Reserved 15880000 158FFFFF 512K Reserved 15900000 15DFFFFF 5M Reserved 15E00000 15E07FFF 32K Reserved 15E08000 15EFFFFF 1M-32K Reserved 15F00000 15F07FFF 32K Reserved 15F08000 167FFFFF 9M-32K Reserved 16800000 1687FFFF 512K Reserved 16880000 168FFFFF 512K Reserved 16900000 16DFFFFF 5M Reserved 16E00000 16E07FFF 32K Reserved 16E08000 16EFFFFF 1M-32K Reserved 16F00000 16F07FFF 32K Reserved 16F08000 177FFFFF 9M-32K Reserved 17800000 1787FFFF 512K Reserved 17880000 178FFFFF 512K Reserved 17900000 17DFFFFF 5M Reserved 17E00000 17E07FFF 32K Reserved 17E08000 17EFFFFF 1M-32K Reserved 17F00000 17F07FFF 32K Reserved 17F08000 1FFFFFFF 129M-32K Reserved 20000000 200FFFFF 1M System Trace Manager (STM) Configuration 20100000 20AFFFFF 10M Reserved 20B00000 20B1FFFF 128K Boot ROM 20B20000 20BEFFFF 832K Reserved 20BF0000 20BF03FF 1K SPI 20BF0400 20BFFFFF 63K Reserved 20C00000 20C000FF 256 EMIF-16 Config 20C00100 20FFFFFF 12M - 256 Reserved 21000000 210000FF 256 DDR3 EMIF Configuration 24 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-2 Memory Map Summary for TMS320C6674 (Part 7 of 7) End Bytes Description 21000100 21400000 213FFFFF 4M-256 Reserved 214003FF 1K HyperLink Config 21400400 217FFFFF 4M-1K Reserved 21800000 21807FFF 32K PCIe Config 21808000 33FFFFFF 296M-32K Reserved 34000000 341FFFFF 2M Queue Manager Subsystem Data 34200000 3FFFFFFF 190M Reserved 40000000 4FFFFFFF 256M HyperLink data 50000000 5FFFFFFF 256M Reserved 60000000 6FFFFFFF 256M PCIe Data 70000000 73FFFFFF 64M EMIF16 CS2 Data NAND Memory 74000000 77FFFFFF 64M EMIF16 CS3 Data NAND Memory 78000000 7BFFFFFF 64M EMIF16 CS4 Data NOR Memory 7C000000 7FFFFFFF 64M EMIF16 CS5 Data SRAM Memory 80000000 8FFFFFFF 256M DDR3_ Data 90000000 9FFFFFFF 256M DDR3_ Data A0000000 AFFFFFFF 256M DDR3_ Data B0000000 BFFFFFFF 256M DDR3_ Data C0000000 CFFFFFFF 256M DDR3_ Data D0000000 DFFFFFFF 256M DDR3_ Data E0000000 EFFFFFFF 256M DDR3_ Data F0000000 FFFFFFFF 256M DDR3_ Data ADVANCE INFORMATION Address Start End of Table 2-2 2.4 Boot Sequence The boot sequence is a process by which the DSP's internal memory is loaded with program and data sections. The DSP's internal registers are programmed with predetermined values. The boot sequence is started automatically after each power-on reset, warm reset, and system reset. A local reset to an individual C66x CorePac should not affect the state of the hardware boot controller on the device. For more details on the initiators of the resets, see section ‘‘Reset Controller’’. The C6674 supports several boot processes that begins execution at the ROM base address, which contains the bootloader code necessary to support various device boot modes. The boot processes are software-driven and use the BOOTMODE[12:0] device configuration inputs to determine the software configuration that must be completed. For more details on Boot Sequence see the Bootloader for the C66x DSP User Guide (literature number SPRUGY5). Copyright 2010 Texas Instruments Incorporated Device Overview 25 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.5 Boot Modes Supported and PLL Settings ADVANCE INFORMATION The device supports several boot processes, which leverage the internal boot ROM. Most boot processes are software driven, using the BOOTMODE[3:0] device configuration inputs to determine the software configuration that must be completed. From a hardware perspective, there are two possible boot modes: • Public ROM Boot - C66x CorePac 0 is released from reset and begins executing from the L3 ROM base 2 address. After performing the boot process (e.g., from I C ROM, Ethernet, or RapidIO), the C66x CorePac 0 then begins execution from the provided boot entry point, other C66x CorePac’s are released from reset based on interrupts generated by C66x CorePac 0, see the Bootloader for the C66x DSP User Guide (literature number SPRUGY5) for more details. • Secure ROM Boot - On secure devices, the C66x CorePac 0 is released from reset and begin executing from secure ROM. Software in the secure ROM will free up internal RAM pages, after which the C66x CorePac 0 initiates the boot process. The C66x CorePac 0 performs any authentication and decryption required on the bootloaded image prior to beginning execution. The boot process performed by the C66x CorePac 0 in public ROM boot and secure ROM boot are determined by the BOOTMODE[12:0] value in the DEVSTAT register. The C66x CorePac 0 reads this value, and then executes the associated boot process in software. Figure 2-2 shows the bits associated with BOOTMODE[12:0]. Figure 2-2 Boot Mode Pin Decoding Boot Mode Pins 12 11 10 9 8 7 PLL Mult 2 I C /SPI Ext Dev Cfg 6 5 4 3 Device Configuration 2 1 0 Boot Device 2.5.1 Boot Device Field The Boot Device field BOOTMODE[2:0] defines the boot device that is chosen. Table 2-3 shows the supported boot modes. Table 2-3 26 Boot Mode Pins: Boot Device Values Bit Field Value 2-0 Boot Device 0 Sleep / test modes / EMIF16 1 Serial Rapid I/O 2 Ethernet (SGMII) (PA driven from core clk) 3 Ethernet (SGMII) (PA driver from PA clk) 4 PCI 5 IC 6 SPI 7 HyperLink Device Overview Description 2 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.5.2 Device Configuration Field The device configuration fields BOOTMODE[9:3] are used to configure the boot peripheral and, therefore, the bit definitions depend on the boot mode 2.5.2.1 Sleep / EMIF16 Boot Device Configuration Figure 2-3 Sleep / EMIF16 Configuration Bit Fields 9 8 7 Reserved Bit Field Reserved 7 Wait Enable Value 0-3 Sub-Mode 3 Reserved Sub-Mode Reserved Description Reserved 0 Wait enable disabled (EMIF16 sub mode) 1 Wait enable enabled (EMIF16 sub mode) 0 Sleep boot 1 4-3 4 Sleep / EMIF16 Configuration Bit Field Descriptions 9-8 6-5 Wait Enable 5 0-3 ADVANCE INFORMATION Table 2-4 6 EMIF16 boot Reserved 2.5.2.2 Ethernet (SGMII) Boot Device Configuration Figure 2-4 Ethernet (SGMII) Device Configuration Bit Fields 9 8 7 SerDes Clock Mult Table 2-5 Ext connection 5 Device ID 4 3 Reserved Ethernet (SGMII) Configuration Bit Field Descriptions Bit Field 9-8 SerDes Clock Mult 7-6 6 Ext connection Value Description The output frequency of the PLL must be 1.25 GBs. 0 ×8 for input clock of 156.25 MHz 1 ×5 for input clock of 250 MHz 2 ×4 for input clock of 312.5 MHz 3 Reserved 0 Mac to Mac connection, master with auto negotiation 1 Mac to Mac connection, slave, and Mac to Phy 2 Mac to Mac, forced link 3 Mac to fiber connection 5 Device ID 0-7 This value is used in the device ID field of the Ethernet-ready frame. 4-3 Reserved 0-3 Reserved Copyright 2010 Texas Instruments Incorporated Device Overview 27 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.5.2.3 Serial Rapid I/O Boot Device Configuration The device ID is always set to 0xff (8-bit node IDs) or 0xffff (16 bit node IDs) at power-on reset. Figure 2-5 Serial Rapid I/O Device Configuration Bit Fields 9 8 Lane Setup Table 2-6 9 Lane Setup 4 Ref Clock Value 3 Reserved Description 0 ADVANCE INFORMATION Data Rate Ref Clock 4-3 5 Serial Rapid I/O Configuration Bit Field Descriptions Field 6-5 6 Data Rate Bit 8-7 7 Reserved Port Configured as 4 ports each 1 lane wide (4 -1× ports) 1 Port Configured as 2 ports 2 lanes wide (2 – 2× ports) 0 Data Rate = 1.25 GBs 1 Data Rate = 2.5 GBs 2 Data Rate = 3.125 GBs 3 Data Rate = 5.0 GBs 0 Reference Clock = 156.25 MHz 1 Reference Clock = 250 MHz 2 Reference Clock = 312.5 MHz 0-3 Reserved In SRIO boot mode, the message mode will be enabled by default. If use of the memory reserved for received messages is required and reception of messages cannot be prevented, the master can disable the message mode by writing to the boot table and generating a boot restart. 2.5.2.4 PCI Boot Device Configuration Extra device configuration is provided in the PCI bits in the DEVSTAT register. Figure 2-6 PCI Device Configuration Bit Fields 9 8 7 Reserved Table 2-7 5 4 BAR Config 3 Reserved PCI Device Configuration Bit Field Descriptions Bit Field 9 Reserved 8-5 Bar Config 0-0xf 4-3 Reserved 0-3 28 6 Device Overview Value Description Reserved See Table 2-8. Reserved Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com BAR Config / PCIe Window Sizes 32-Bit Address Translation 64-Bit Address Translation BAR cfg BAR0 BAR1 BAR2 BAR3 BAR4 BAR5 0b0000 PCIe MMRs 32 32 32 32 Clone of BAR4 BAR1/2 BAR3/4 0b0001 16 16 32 64 0b0010 16 32 32 64 0b0011 32 32 32 64 0b0100 16 16 64 64 0b0101 16 32 64 64 0b0110 32 32 64 64 0b0111 32 32 64 128 0b1000 64 64 128 256 0b1001 4 128 128 128 0b1010 4 128 128 256 0b1011 0b1100 4 128 256 256 256 256 0b1101 512 512 0b1110 1024 1024 0b1111 2048 2048 2.5.2.5 I2C Boot Device Configuration 2.5.2.5.1 I2C Master Mode In master mode, the I2C device configuration uses ten bits of device configuration instead of seven as used in other 2 boot modes. In this mode, the device will make the initial read of the I C EEPROM while the PLL is in bypass mode. The initial read will contain the desired clock multiplier, which will be set up prior to any subsequent reads. I2C Master Mode Device Configuration Bit Fields Figure 2-7 12 11 10 9 Reserved Speed Address Mode 8 7 6 5 4 3 Parameter Index (0) Table 2-9 I2C Master Mode Device Configuration Field Descriptions Bit Field 12 Reserved 11 Speed 10 9 Address Mode Value Description Reserved 0 I2C data rate set to approximately 20 kHz 1 I C fast mode. Data rate set to approximately 400 kHz (will not exceed) 0 Boot from I2C EEPROM at I2C bus address 0x50 1 Boot from I C EEPROM at I C bus address 0x51 0 Master mode 1 Passive mode (see section I C Passive Mode) 2 2 2 2 8-3 Parameter Index 0-63 Identifies the index of the configuration table initially read from the I2C EEPROM 4-3 Reserved 0-3 Reserved Copyright 2010 Texas Instruments Incorporated Device Overview 29 ADVANCE INFORMATION Table 2-8 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.5.2.5.2 I2C Passive Mode In passive mode, the device does not drive the clock, but simply acks data received on the specified address. I2C Passive Mode Device Configuration Bit Fields Figure 2-8 9 8 7 Mode (1) Table 2-10 6 5 4 2 Receive I C Address 3 Reserved I2C Passive Mode Device Configuration Field Descriptions ADVANCE INFORMATION Bit Field Value 9 Mode 0 Master Mode (See ‘‘I2C Master Mode’’ on page 29) 1 Passive Mode 2 Description 2 8-5 Receive I C Address 0-15 The I C Bus address the device will listen to for data 4-3 Reserved 0-3 Reserved 2.5.2.6 SPI Boot Device Configuration In SPI boot mode, the SPI device configuration uses ten bits of device configuration instead of seven as used in other boot modes. Figure 2-9 SPI Device Configuration Bit Fields 12 11 Mode Table 2-11 Bit Field 12-11 Mode 10 9 10 9 4, 5 Pin Addr Width 8 7 Chip Select 5 4 Parameter Table Index 3 Reserved SPI Device Configuration Field Descriptions 4, 5 Pin Addr Width Value Description Clk Pol / Phase 0 Data is output on the rising edge of SPICLK. Input data is latched on the falling edge. 1 Data is output one half-cycle before the first rising edge of SPICLK and on subsequent falling edges. Input data is latched on the rising edge of SPICLK. 2 Data is output on the falling edge of SPICLK. Input data is latched on the rising edge. 3 Data is output one half-cycle before the first falling edge of SPICLK and on subsequent rising edges. Input data is latched on the falling edge of SPICLK. 0 4-pin mode used 1 5-pin mode used 0 16-bit address values are used 1 24-bit address values are used 8-7 Chip Select 0-3 The chip select field value 6-5 Parameter Table Index 0-3 Specifies which parameter table is loaded 4-3 Reserved 0-3 Reserved 30 6 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.5.2.7 HyperLink Boot Device Configuration Figure 2-10 HyperLink Boot Device Configuration Fields 9 8 7 Reserved Data Rate Field 9 Reserved 8-7 Data Rate 4-3 4 3 Ref Clock Reserved HyperLink Boot Device Configuration Field Descriptions Bit 6-5 5 Value Description Reserved Ref Clocks Reserved 0 1.25 GBs 1 3.125 GBs 2 6.25 GBs 3 12.5 GBs 0 156.25 MHz 1 250 MHz 2 312.5 MHz 0-3 Reserved 2.5.3 PLL Boot Configuration Settings The PLL default settings are determined by the BOOTMODE[12:10] bits. The Table 2-13 shows settings for various input clock frequencies. This will set the PLL to the maximum clock setting for the device. CLK = CLKIN × (PLLM+1) ÷ (2 × (PLLD+1)) The PA configuration is also shown. The PA is configured with these values only if the Ethernet boot mode is selected with the input clock set to match the main PLL clock (not the PA SerDes clock). See Table 2-3 for details on configuring Ethernet boot mode. See section 7.8 ‘‘Main PLL and PLL Controller’’ on page 209 for further details Table 2-13 BOOTMODE [12:10] C66x DSP System PLL Configuration Input Clock Freq (MHz) 800 MHz Device PLLD PLLM DSP ƒ 1000 MHz Device PLLD PLLM DSP ƒ 1200 MHz Device PLLD PLLM DSP ƒ PA = 350 MHz PLLD PLLM DSP ƒ 0b000 50.00 0 31 800 0 39 1000 0 47 1200 0 41 1050 0b001 66.67 0 23 800.04 0 29 1000.05 0 35 1200.06 1 62 1050.053 0b010 80.00 0 19 800 0 24 1000 0 29 1200 3 104 1050 0b011 100.00 0 15 800 0 19 1000 0 23 1200 0 20 1050 0b100 156.25 24 255 800 4 63 1000 24 383 1200 24 335 1050 0b101 250.00 4 31 800 0 7 1000 4 47 1200 4 41 1050 0b110 312.50 24 127 800 4 31 1000 24 191 1200 24 167 1050 0b111 122.88 47 624 800 28 471 999.989 31 624 1200 11 204 1049.6 2.6 Second-Level Bootloaders Any of the boot modes can be used to download a second-level bootloader. A second-level bootloader allows for any level of customization to current boot methods as well as the definition of a completely customized boot. Copyright 2010 Texas Instruments Incorporated Device Overview 31 ADVANCE INFORMATION Table 2-12 6 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.7 Terminals Figure 2-11 Shows the TMS320C6674CYP ball grid area (BGA) package (bottom view) Figure 2-11 CYP 841-Pin BGA Package Bottom View AH AF AD AB Y AJ AG AE AC AA ADVANCE INFORMATION W V T U R P N M L K J H F D G E C B A 3 1 2 5 4 9 7 6 8 11 13 15 17 19 21 23 25 27 29 10 12 14 16 18 20 22 24 26 28 2.8 Terminal Functions The terminal functions table (Table 2-15) identifies the external signal names, the associated pin (ball) numbers, the pin type (I, O/Z, or I/O/Z), whether the pin has any internal pullup/pulldown resistors, and gives functional pin descriptions. This table is arranged by function. The power terminal functions table (Table 2-16) lists the various power supply pins and ground pins and gives functional pin descriptions. Table 2-17 shows all pins arranged by signal name. Table 2-18 shows all pins arranged by ball number. There are 17 pins that have a secondary function as well as a primary function. The secondary function is indicated with a dagger (†). For more detailed information on device configuration, peripheral selection, multiplexed/shared pins, and pullup/pulldown resistors, see section 3.4 ‘‘Pullup/Pulldown Resistors’’ on page 77. Use the symbol definitions in Table 2-14 when reading Table 2-15. Table 2-14 I/O Functional Symbol Definitions Functional Symbol IPD or IPU A Table 2-15 Column Heading Definition Internal 100-μA pulldown or pullup is provided for this terminal. In most systems, a 1-kΩ resistor can be used to oppose the IPD/IPU. For more detailed information on pulldown/pullup resistors and situations in which external pulldown/pullup resistors are required, see Hardware Design Guide for KeyStone Devices (literature number SPRABI2). IPD/IPU Analog signal Type Ground Type Input terminal Type O Output terminal Type S Supply voltage Type Z Three-state terminal or high impedance Type GND I End of Table 2-14 32 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-15 Terminal Functions — Signals and Control by Function (Part 1 of 13) Signal Name Ball No. Type IPD/IPU Description LENDIAN † H25 IOZ UP Endian configuration pin (Pin shared with GPIO[0]) BOOTMODE00 † J28 IOZ Down BOOTMODE01† J29 IOZ Down BOOTMODE02 † J26 IOZ Down BOOTMODE03 † J25 IOZ Down BOOTMODE04 † J27 IOZ Down BOOTMODE05 † J24 IOZ Down BOOTMODE06 † K27 IOZ Down BOOTMODE07 † K28 IOZ Down BOOTMODE08 † K26 IOZ Down BOOTMODE09 † K29 IOZ Down BOOTMODE10 † L28 IOZ Down BOOTMODE11 † L29 IOZ Down ADVANCE INFORMATION Boot Configuration Pins See Section 2.5 ‘‘Boot Modes Supported and PLL Settings’’ on page 26 for more details (Pins shared with GPIO[1:13]) BOOTMODE12 † K25 IOZ Down PCIESSMODE0 † K24 IOZ Down PCIESSMODE1 † L27 IOZ Down PCIESSEN † L24 I Down CORECLKP AG3 I CORECLKN AG4 I SRIOSGMIICLKP AG6 I SRIOSGMIICLKN AJ6 I DDRCLKP G29 I DDRCLKN H29 I PCIECLKP AG5 I PCIECLKN AH5 I MCMCLKP W2 I MCMCLKN Y2 I PASSCLKP AJ5 I PASSCLKN AJ4 I AVDDA1 H22 P AVDDA2 AC6 P DDR_CLK PLL Power Supply Pin AVDDA3 AD5 P PS_SS_CLK PLL Power Supply Pin PCIe Mode selection pins (Pins shared with GPIO[14:15]) PCIe module enable (Pin shared with TIMI0) Clock / Reset Core Clock Input to main PLL. RapidIO/SGMII Reference Clock to drive the RapidIO and SGMII SerDes DDR Reference Clock Input to DDR PLL ( PCIe Clock Input to drive PCIe SerDes HyperLink Reference Clock to drive the HyperLink SerDes Packet Sub-system Reference Clock SYS_CLK PLL Power Supply Pin SYSCLKOUT AE3 OZ Down System Clock Output to be used as a general purpose output clock for debug purposes PACLKSEL AE4 I Down PA clock select to choose between core clock and PASSCLK pins HOUT AD20 OZ UP Interrupt output pulse created by IPCGRH NMI M25 I UP Non-maskable Interrupt LRESET N26 I UP Warm Reset LRESETNMIEN M27 I UP Enable for core selects Copyright 2010 Texas Instruments Incorporated Device Overview 33 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-15 www.ti.com Terminal Functions — Signals and Control by Function (Part 2 of 13) ADVANCE INFORMATION Signal Name Ball No. Type IPD/IPU CORESEL0 AF2 Down CORESEL1 AD4 I Down CORESEL2 AE6 I Down CORESEL3 AE5 I Down RESETFULL N25 I UP Full Reset RESET M29 I UP Warm Reset of non isolated portion on the IC POR AC20 I RESETSTAT N27 O UP Reset Status Output BOOTCOMPLETE AE2 OZ Down Boot progress indication output PTV15 G22 A I Description Select for the target core for LRESET and NMI. For more details see Table 7-39‘‘NMI and Local Reset Timing Requirements’’ on page 187 Power-on Reset PTV Compensation NMOS Reference Input DDR DDRDQM0 E29 OZ DDRDQM1 C27 OZ DDRDQM2 A25 OZ DDRDQM3 A22 OZ DDRDQM4 A10 OZ DDRDQM5 A8 OZ DDRDQM6 B5 OZ DDRDQM7 B2 OZ DDRDQM8 A20 OZ DDRDQS0P C28 IOZ DDRDQS0N C29 IOZ DDRDQS1P A27 IOZ DDRDQS1N B27 IOZ DDRDQS2P A24 IOZ DDRDQS2N B24 IOZ DDRDQS3P A21 IOZ DDRDQS3N B21 IOZ DDRDQS4P A9 IOZ DDRDQS4N B9 IOZ DDRDQS5P B6 IOZ DDRDQS5N A6 IOZ DDRDQS6P B3 IOZ DDRDQS6N A3 IOZ DDRDQS7P D1 IOZ DDRDQS7N C1 IOZ DDRDQS8P A19 IOZ DDRDQS8N B19 IOZ 34 Device Overview DDR EMIF Data Masks DDR EMIF Data Strobe Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-15 Terminal Functions — Signals and Control by Function (Part 3 of 13) Signal Name Ball No. Type DDRCB00 E19 IOZ DDRCB01 C20 IOZ DDRCB02 D19 IOZ B20 IOZ DDRCB04 C19 IOZ DDRCB05 C18 IOZ DDRCB06 B18 IOZ DDRCB07 A18 IOZ Description DDR EMIF Check Bits ADVANCE INFORMATION DDRCB03 IPD/IPU Copyright 2010 Texas Instruments Incorporated Device Overview 35 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-15 www.ti.com Terminal Functions — Signals and Control by Function (Part 4 of 13) Signal Name Ball No. Type DDRD00 E28 DDRD01 D29 IOZ DDRD02 E27 IOZ DDRD03 D28 IOZ DDRD04 D27 IOZ ADVANCE INFORMATION DDRD05 B28 IOZ DDRD06 E26 IOZ DDRD07 F25 IOZ DDRD08 F24 IOZ DDRD09 E24 IOZ DDRD10 E25 IOZ DDRD11 D25 IOZ DDRD12 D26 IOZ DDRD13 C26 IOZ DDRD14 B26 IOZ DDRD15 A26 IOZ DDRD16 F23 IOZ DDRD17 F22 IOZ DDRD18 D24 IOZ DDRD19 E23 IOZ DDRD20 A23 IOZ DDRD21 B23 IOZ DDRD22 C24 IOZ DDRD23 E22 IOZ DDRD24 D21 IOZ DDRD25 F20 IOZ DDRD26 E21 IOZ DDRD27 F21 IOZ DDRD28 D22 IOZ DDRD29 C21 IOZ DDRD30 B22 IOZ DDRD31 C22 IOZ DDRD32 E10 IOZ DDRD33 D10 IOZ DDRD34 B10 IOZ DDRD35 D9 IOZ DDRD36 E9 IOZ DDRD37 C9 IOZ DDRD38 B8 IOZ DDRD39 E8 IOZ DDRD40 A7 IOZ DDRD41 D7 IOZ 36 Device Overview IPD/IPU Description IOZ DDR EMIF Data Bus Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Terminal Functions — Signals and Control by Function (Part 5 of 13) Signal Name Ball No. Type DDRD42 E7 IOZ DDRD43 C7 IOZ DDRD44 B7 IOZ DDRD45 E6 IOZ DDRD46 D6 IOZ DDRD47 C6 IOZ DDRD48 C5 IOZ DDRD49 A5 IOZ DDRD50 B4 IOZ DDRD51 A4 IOZ DDRD52 D4 IOZ DDRD53 E4 IOZ DDRD54 C4 IOZ DDRD55 C3 IOZ DDRD56 F4 IOZ DDRD57 D2 IOZ DDRD58 E2 IOZ DDRD59 C2 IOZ DDRD60 F2 IOZ DDRD61 F3 IOZ DDRD62 E1 IOZ DDRD63 F1 IOZ DDRCE0 C11 OZ DDRCE1 C12 OZ DDRBA0 A13 OZ DDRBA1 B13 OZ DDRBA2 C13 OZ DDRA00 A14 OZ DDRA01 B14 OZ DDRA02 F14 OZ DDRA03 F13 OZ DDRA04 A15 OZ DDRA05 C15 OZ DDRA06 B15 OZ DDRA07 D15 OZ DDRA08 F15 OZ DDRA09 E15 OZ DDRA10 E16 OZ DDRA11 D16 OZ DDRA12 E17 OZ DDRA13 C16 OZ DDRA14 D17 OZ DDRA15 C17 OZ DDRCAS D12 OZ IPD/IPU Copyright 2010 Texas Instruments Incorporated Description ADVANCE INFORMATION Table 2-15 DDR EMIF Data Bus DDR EMIF Chip Enables DDR EMIF Bank Address DDR EMIF Address Bus DDR EMIF Column Address Strobe Device Overview 37 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-15 www.ti.com Terminal Functions — Signals and Control by Function (Part 6 of 13) Signal Name Ball No. Type DDRRAS C10 OZ DDR EMIF Row Address Strobe DDRWE E12 OZ DDR EMIF Write Enable DDRCKE0 D11 OZ DDR EMIF Clock Enable DDR EMIF Clock Enable ADVANCE INFORMATION DDRCKE1 E18 OZ DDRCLKOUTP0 A12 OZ DDRCLKOUTN0 B12 OZ DDRCLKOUTP1 A16 OZ DDRCLKOUTN1 B16 OZ DDRODT0 D13 OZ IPD/IPU Description DDR EMIF Output Clocks to drive SDRAMs (one clock pair per SDRAM) DDR EMIF On Die Termination Outputs used to set termination on the SDRAMs DDRODT1 E13 OZ DDR EMIF On Die Termination Outputs used to set termination on the SDRAMs DDRRESET E11 OZ DDR Reset signal DDRSLRATE0 G27 I Down DDRSLRATE1 H27 I Down VREFSSTL E14 P DDR Slew rate control Reference Voltage Input for SSTL15 buffers used by DDR EMIF (VDDS15 ÷ 2) EMIF16 EMIFRW P26 O UP EMIFCE0 P25 O UP EMIFCE1 R27 O UP EMIFCE2 R28 O UP EMIFCE3 R25 O UP EMIFOE R26 O UP EMIFWE P24 O UP EMIFBE0 R24 O UP EMIFBE1 R23 O UP EMIFWAIT0 T29 I Down EMIFWAIT1 T28 I Down 38 Device Overview EMIF16 Control Signals Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Terminal Functions — Signals and Control by Function (Part 7 of 13) Signal Name Ball No. Type IPD/IPU EMIFA00 T27 Down EMIFA01 T24 O Down EMIFA02 U29 O Down EMIFA03 T25 O Down EMIFA04 U27 O Down EMIFA05 U28 O Down EMIFA06 U25 O Down EMIFA07 U24 O Down EMIFA08 V28 O Down EMIFA09 V29 O Down EMIFA10 V27 O Down EMIFA11 V26 O Down EMIFA12 V25 O Down O EMIFA13 V24 O Down EMIFA14 W28 O Down EMIFA15 W27 O Down EMIFA16 W29 O Down EMIFA17 W26 O Down EMIFA18 W25 O Down EMIFA19 W24 O Down EMIFA20 W23 O Down EMIFA21 Y29 O Down EMIFA22 Y28 O Down EMIFA23 U23 O Down EMIFD00 Y27 IOZ Down EMIFD01 AB29 IOZ Down EMIFD02 AA29 IOZ Down EMIFD03 Y26 IOZ Down EMIFD04 AA27 IOZ Down EMIFD05 AB27 IOZ Down EMIFD06 AA26 IOZ Down EMIFD07 AA25 IOZ Down EMIFD08 Y25 IOZ Down EMIFD09 AB25 IOZ Down EMIFD10 AA24 IOZ Down EMIFD11 Y24 IOZ Down EMIFD12 AB23 IOZ Down EMIFD13 AB24 IOZ Down EMIFD14 AB26 IOZ Down EMIFD15 AC25 IOZ Down Copyright 2010 Texas Instruments Incorporated Description ADVANCE INFORMATION Table 2-15 EMIF16 Address EMIF16 Data Device Overview 39 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-15 Signal Name www.ti.com Terminal Functions — Signals and Control by Function (Part 8 of 13) Ball No. Type IPD/IPU Description EMU ADVANCE INFORMATION EMU00 AC29 IOZ UP EMU01 AC28 IOZ UP EMU02 AC27 IOZ UP EMU03 AC26 IOZ UP EMU04 AD29 IOZ UP EMU05 AD28 IOZ UP EMU06 AD27 IOZ UP EMU07 AE29 IOZ UP EMU08 AE28 IOZ UP EMU09 AF29 IOZ UP EMU10 AE27 IOZ UP EMU11 AF28 IOZ UP EMU12 AG29 IOZ UP EMU13 AD26 IOZ UP EMU14 AG28 IOZ UP EMU15 AG27 IOZ UP EMU16 AJ27 IOZ UP EMU17 AF27 IOZ UP EMU18 AH27 IOZ UP Emulation and Trace Port General Purpose Input/Output (GPIO) GPIO00 H25 IOZ UP GPIO01 J28 IOZ Down GPIO02 J29 IOZ Down GPIO03 J26 IOZ Down GPIO04 J25 IOZ Down GPIO05 J27 IOZ Down GPIO06 J24 IOZ Down GPIO07 K27 IOZ Down GPIO08 K28 IOZ Down GPIO09 K26 IOZ Down GPIO10 K29 IOZ Down GPIO11 L28 IOZ Down GPIO12 L29 IOZ Down GPIO13 K25 IOZ Down GPIO14 K24 IOZ Down GPIO15 L27 IOZ Down 40 Device Overview General Purpose Input/Output These GPIO pins have secondary functions assigned to them as mentioned in the ‘‘Boot Configuration Pins’’ on page 33. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-15 Terminal Functions — Signals and Control by Function (Part 9 of 13) Signal Name Ball No. Type IPD/IPU Description HyperLink U2 I MCMRXP0 T2 I MCMRXN1 T1 I MCMRXP1 R1 I MCMRXN2 M1 I MCMRXP2 N1 I MCMRXN3 P2 I MCMRXP3 N2 I MCMTXN0 M5 O MCMTXP0 N5 O MCMTXN1 T4 O MCMTXP1 U4 O MCMTXN2 R5 O MCMTXP2 T5 O MCMTXN3 N4 O MCMTXP3 P4 O Serial HyperLink Receive Data ADVANCE INFORMATION MCMRXN0 Serial HyperLink Transmit Data MCMRXFLCLK W3 O Down MCMRXFLDAT W4 O Down MCMTXFLCLK AA1 I Down MCMTXFLDAT AA3 I Down MCMRXPMCLK Y3 I Down MCMRXPMDAT Y4 I Down MCMTXPMCLK AA2 O Down MCMTXPMDAT AA4 O Down MCMREFCLKOUTP Y1 O MCMREFCLKOUTN W1 O Serial HyperLink Sideband Signals HyperLink Reference clock output for daisy chain connection 2 I C 2 SCL AD3 IOZ I C Clock SDA AC4 IOZ I2C Data JTAG TCK N29 I UP JTAG Clock Input TDI P27 I UP JTAG Data Input TDO R29 OZ UP JTAG Data Output TMS P29 I UP JTAG Test Mode Input TRST P28 I Down JTAG Reset MDIO MDIO G26 IOZ UP MDIO Data MDCLK H26 O Down MDIO Clock PCIERXN0 AH7 I PCIERXP0 AH8 I PCIERXN1 AJ9 I PCIERXP1 AJ8 I PCIe Copyright 2010 Texas Instruments Incorporated PCIexpress Receive Data (2 links) Device Overview 41 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-15 www.ti.com Terminal Functions — Signals and Control by Function (Part 10 of 13) Signal Name Ball No. Type PCIETXN0 AF8 O PCIETXP0 AF7 O PCIETXN1 AG9 O PCIETXP1 AG8 O IPD/IPU Description PCIexpress Transmit Data (2 links) Serial RapidIO ADVANCE INFORMATION RIORXN0 AJ11 I RIORXP0 AJ12 I RIORXN1 AH10 I RIORXP1 AH11 I RIORXN2 AH14 I RIORXP2 AH13 I RIORXN3 AJ15 I RIORXP3 AJ14 I RIOTXN0 AF10 O RIOTXP0 AF11 O RIOTXN1 AG11 O RIOTXP1 AG12 O RIOTXN2 AG15 O RIOTXP2 AG14 O RIOTXN3 AF14 O RIOTXP3 AF13 O SGMII0RXN AJ18 I SGMII0RXP AJ17 I SGMII0TXN AG18 O SGMII0TXP AG17 O SGMII1RXN AH17 I SGMII1RXP AH16 I SGMII1TXN AF17 O SGMII1TXP AF16 O Serial RapidIO Receive Data (2 links) Serial RapidIO Receive Data (2 links) Serial RapidIO Transmit Data (2 links) Serial RapidIO Transmit Data (2 links) SGMII Ethernet MAC SGMII Receive Data Ethernet MAC SGMII Transmit Data Ethernet MAC SGMII Receive Data Ethernet MAC SGMII Transmit Data SmartReflex 2 VCL M24 IOZ Voltage Control I C Clock VD M23 IOZ Voltage Control I2C Data VCNTL0 L23 OZ VCNTL1 K23 OZ VCNTL2 J23 OZ VCNTL3 H23 OZ SPISCS0 AG1 OZ UP SPI Interface Enable 0 SPISCS1 AG2 OZ UP SPI Interface Enable 1 SPICLK AE1 OZ Down SPI Clock SPIDIN AD2 I Down SPI Data In SPIDOUT AB1 OZ Down SPI Data Out Voltage Control Outputs to variable core power supply SPI 42 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-15 Signal Name Terminal Functions — Signals and Control by Function (Part 11 of 13) Ball No. Type IPD/IPU Description Timer TIMI0 L24 I Down TIMI1 L26 I Down TIMO0 L25 OZ Down TIMO1 M26 OZ Down CLKA0 AF25 I Down Timer Inputs Timer Outputs CLKB0 AG25 I Down FSA0 AJ26 I Down FSB0 AG26 I Down TR00 AH26 I Down TR01 AJ25 I Down TR02 AD23 I Down TR03 AD24 I Down TR04 AC23 I Down TR05 AH25 I Down TR06 AC24 I Down TR07 AE25 I Down TX00 AE24 OZ Down TX01 AD25 OZ Down TX02 AJ24 OZ Down TX03 AG24 OZ Down TX04 AH24 OZ Down TX05 AF24 OZ Down TX06 AE23 OZ Down TX07 AF23 OZ Down Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION TSIP TSIP0 Device Overview 43 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-15 www.ti.com Terminal Functions — Signals and Control by Function (Part 12 of 13) Signal Name Ball No. Type IPD/IPU CLKA1 AJ23 Down I ADVANCE INFORMATION CLKB1 AH23 I Down FSA1 AG23 I Down FSB1 AJ22 I Down TR10 AE22 I Down TR11 AD21 I Down TR12 AC21 I Down TR13 AJ21 I Down TR14 AH22 I Down TR15 AJ20 I Down TR16 AH21 I Down TR17 AG21 I Down TX10 AF21 OZ Down TX11 AD22 OZ Down TX12 AC22 OZ Down TX13 AE21 OZ Down TX14 AG20 OZ Down TX15 AE20 OZ Down TX16 AH20 OZ Down TX17 AF20 OZ Down Description TSIP1 UART UARTRXD AD1 I Down UART Serial Data In UARTTXD AC1 OZ Down UART Serial Data Out UARTCTS AB3 I Down UART Clear To Send UARTRTS AB2 OZ Down UART Request To Send RSV01 AH28 IOZ Down Reserved - leave unconnected RSV02 N24 OZ Down Reserved - leave unconnected RSV03 N23 OZ Down Reserved - leave unconnected RSV04 AH2 O Reserved - leave unconnected RSV05 AJ3 O Reserved - leave unconnected RSV06 H28 O Reserved - leave unconnected RSV07 G28 O Reserved - leave unconnected RSV08 AH19 A Reserved - leave unconnected RSV09 AF19 A Reserved - leave unconnected RSV10 K22 A Reserved - leave unconnected RSV11 J22 A Reserved - leave unconnected RSV12 Y5 A Reserved - leave unconnected RSV13 W5 A Reserved - leave unconnected RSV14 W6 A Reserved - leave unconnected RSV15 AE12 A Reserved - leave unconnected RSV16 AC9 A Reserved - leave unconnected RSV17 AD19 A Reserved - leave unconnected RSV24 AH4 O Reserved - leave unconnected Reserved 44 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 2-15 Terminal Functions — Signals and Control by Function (Part 13 of 13) Signal Name Ball No. Type RSV25 AH3 IPD/IPU RSV20 AF3 OZ Down Reserved - leave unconnected RSV21 G25 OZ Down Reserved - leave unconnected RSV22 AF1 OZ Down Reserved - leave unconnected O Description Reserved - leave unconnected End of Table 2-15 Terminal Functions — Power and Ground Supply Ball No. Volts Description AVDDA1 H22 1.8 PLL Supply - CORE_PLL AVDDA2 AC6 1.8 PLL Supply - DDR3_PLL AVDDA3 AD5 1.8 PLL Supply - PASS_PLL CVDD H7, H9, H11, H13, H15, H17, H19, H21, J10, J12, J16, J18, J20, K11, K17, K19, K21, L10, L12, L16, 0.9 to L18, M11, M13, M15, M17, M19, N8, N10, N12, N14, N16, N18, P9, P11, P13, P15, P17, P19, P21, R8, R10, R18, R20, R22, T9, T11, T13, T15, T17, T19, T21, U8, U10, U18, U20, U22, V9, V11, 1.1 V17, V19, V21, W8, W10, W18, W20, W22, Y9, Y11, Y13, Y15, Y17, Y19, Y21, AA8, AA10, AA12, AA14, AA16, AA18, AA22 SmartReflex core supply voltage CVDD1 J8, J14, K7, K9, K13, K15, L8, L14, L20, L22, M9, M21, N20, N22, R12, R14, R16, U12, U14, U16, V13, V15, W12, W14, W16 Fixed core supply voltage DVDD15 A2, A11, A17, A28, B1, B29, C14, C25, D5, D8, D20, D23, E3, F5, F7, F9, F11, F17, F19, F26, F28, 1.5 G2, G4, G8, G10, G12, G14, G16, G18, G20, G23 DDR IO supply DVDD18 H24, N28, P23, T23, U26, V23, Y7, Y23, AA6, AB5, AB7, AB19, AB21, AB28, AC3, AF5, AF26, AG22, AH1, AH29, AJ2, AJ28 1.8 IO supply VDDR1 V5 1.5 HyperLink SerDes regulator supply VDDR2 AE10 1.5 PCIe SerDes regulator supply VDDR3 AE16 1.5 SGMII SerDes regulator supply VDDR4 AE14 1.5 SRIO SerDes regulator supply VDDT1 M7, N6, P7, R6, T7, U6, V7 1.0 HyperLink SerDes termination supply VDDT2 AB9, AB11, AB13, AB15, AB17, AC8, AC10, AC12, AC14, AC16, AC18, AD7, AD9, AD11, AD13, AD15, AD17, AE18 1.0 SGMII/SRIO/PCIe SerDes termination supply VREFSSTL E14 0.75 DDR3 reference voltage VSS A1, A29, B11, B17, B25, C8, C23, D3, D14, D18, E5, E20, F6, F8, F10, F12, F16, F18, F27, F29, G1, GND G3, G5, G6, G7, G9, G11, G13, G15, G17, G19, G21, G24, H1, H2, H3, H4, H5, H6, H8, H10, H12, H14, H16, H18, H20, J1, J2, J3, J4, J5, J6, J7, J9, J11, J13, J15, J17, J19, J21, K1, K2, K3, K4, K5, K6, K8, K10, K12, K14, K16, K18, K20, L1, L2, L3, L4, L5, L6, L7, L9, L11, L13, L15, L17, L19, L21, M2, M3, M4, M6, M8, M10, M12, M14, M16, M18, M20, M22, M28, N3, N7, N9, N11, N13, N15, N17, N19, N21, P1, P3, P5, P6, P8, P10, P12, P14, P16, P18, P20, P22, R2, R3, R4, R7, R9, R11, R13, R15, R17, R19, R21, T3, T6, T8, T10, T12, T14, T16, T18, T20, T22, T26, U1, U3, U5, U7, U9, U11, U13, U15, U17, U19, U21, V1, V2, V3, V4, V6, V8, V10, V12, V14, V16, V18, V20, V22, W7, W9, W11, W13, W15, W17, W19, W21, Y6, Y8, Y10, Y12, Y14, Y16, Y18, Y20, Y22, AA5, AA7, AA9, AA11, AA13, AA15, AA17, AA19, AA23, AA28, AB4, AB6, AB8, AB10, AB12, AB14, AB16, AB18, AB20, AB22, AC2, AC5, AC7, AC11, AC13, AC15, AC17, AC19, AD6, AD8, AD10, AD12, AD14, AD16, AD18, AE7, AE8, AE9, AE11, AE13, AE15, AE17, AE19, AE26, AF4, AF6, AF9, AF12, AF15, AF18, AF22, AG7, AG10, AG13, AG16, AG19, AH6, AH9, AH12, AH15, AH18, AJ1, AJ7, AJ10, AJ13, AJ16, AJ19, AJ29 1.0 Ground End of Table 2-16 Copyright 2010 Texas Instruments Incorporated Device Overview 45 ADVANCE INFORMATION Table 2-16 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-17 Terminal Functions — By Signal Name (Part 1 of 13) www.ti.com Table 2-17 Terminal Functions — By Signal Name (Part 2 of 13) Table 2-17 Terminal Functions — By Signal Name (Part 3 of 13) Signal Name Ball Number Signal Name Ball Number Signal Name AVDDA1 H22 CVDD1 J8, J14, K7, K9, K13, K15, L8, L14, L20, L22, M9, M21, N20, N22, R12, R14, R16, U12, U14, U16, V13, V15, W12, W14, W16 DDRD00 E28 DDRD01 D29 DDRA00 A14 DDRA01 AVDDA2 AC6 AVDDA3 AD5 ADVANCE INFORMATION DDRD02 E27 DDRD03 D28 DDRD04 D27 DDRD05 B28 B14 DDRD06 E26 DDRA02 F14 DDRD07 F25 DDRA03 F13 DDRD08 F24 DDRA04 A15 DDRD09 E24 DDRA05 C15 DDRD10 E25 DDRA06 B15 DDRD11 D25 DDRA07 D15 DDRD12 D26 DDRA08 F15 DDRD13 C26 DDRA09 E15 DDRD14 B26 DDRA10 E16 DDRD15 A26 DDRA11 D16 DDRD16 F23 DDRA12 E17 DDRD17 F22 DDRA13 C16 DDRD18 D24 DDRA14 D17 DDRD19 E23 DDRA15 C17 DDRD20 A23 DDRBA0 A13 DDRD21 B23 DDRBA1 B13 DDRD22 C24 DDRBA2 C13 DDRD23 E22 DDRCAS D12 DDRD24 D21 DDRCB00 E19 DDRD25 F20 DDRCB01 C20 DDRD26 E21 DDRCB02 D19 DDRD27 F21 DDRCB03 B20 DDRD28 D22 DDRCB04 C19 DDRD29 C21 DDRCB05 C18 DDRD30 B22 DDRCB06 B18 DDRD31 C22 DDRCB07 A18 DDRD32 E10 N16, N18, P9, P11, P13, P15, P17, P19, P21, R8, R10, R18, R20, R22, T9, T11, T13, T15, T17, T19, T21, U8, U10, U18, U20, U22, V9, V11, V17, V19, V21, W8, DDRCE0 C11 DDRD33 D10 DDRCE1 C12 DDRD34 B10 DDRCKE0 D11 DDRD35 D9 DDRCKE1 E18 DDRD36 E9 DDRCLKN H29 DDRD37 C9 W10, W18, W20, W22, Y9, Y11, Y13, Y15, Y17, Y19, Y21, AA8, AA10, AA12, AA14, AA16, AA18, AA22 DDRCLKOUTN0 B12 DDRD38 B8 DDRCLKOUTN1 B16 DDRD39 E8 DDRCLKOUTP0 A12 DDRD40 A7 DDRCLKOUTP1 A16 DDRD41 D7 DDRCLKP G29 BOOTCOMPLETE AE2 BOOTMODE00 † J28 BOOTMODE01† BOOTMODE02 † BOOTMODE03 † BOOTMODE04 † J29 J26 J25 J27 BOOTMODE05 † J24 BOOTMODE06 † K27 BOOTMODE07 † K28 BOOTMODE08 † K26 BOOTMODE09 † BOOTMODE10 † K29 L28 BOOTMODE11 † L29 BOOTMODE12 † K25 CLKA0 CLKA1 CLKB0 CLKB1 CORECLKN CORECLKP AF25 AJ23 AG25 AH23 AG4 AG3 CORESEL0 AF2 CORESEL1 AD4 CORESEL2 CORESEL3 CVDD CVDD CVDD 46 Device Overview Ball Number AE6 AE5 H7, H9, H11, H13, H15, H17, H19, H21, J10, J12, J16, J18, J20, K11, K17, K19, K21, L10, L12, L16, L18, M11, M13, M15, M17, M19, N8, N10, N12, N14, Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-17 Terminal Functions — By Signal Name (Part 4 of 13) Table 2-17 Signal Name Ball Number Signal Name DDRD42 E7 DDRD43 C7 DDRD44 B7 DDRD45 E6 DDRD46 DDRD47 Terminal Functions — By Signal Name (Part 5 of 13) Table 2-17 Terminal Functions — By Signal Name (Part 6 of 13) Ball Number Signal Name Ball Number DDRDQS5P B6 EMIFA18 W25 DDRDQS6N A3 EMIFA19 W24 DDRDQS6P B3 EMIFA20 W23 DDRDQS7N C1 EMIFA21 Y29 D6 DDRDQS7P D1 EMIFA22 Y28 C6 DDRDQS8N B19 EMIFA23 U23 DDRD48 C5 DDRDQS8P A19 EMIFBE0 R24 DDRD49 A5 DDRODT0 D13 EMIFBE1 R23 DDRD50 B4 DDRODT1 E13 EMIFCE0 P25 DDRD51 A4 DDRRAS C10 EMIFCE1 R27 DDRD52 D4 DDRRESET E11 EMIFCE2 R28 DDRD53 E4 DDRSLRATE0 G27 EMIFCE3 R25 DDRD54 C4 DDRSLRATE1 H27 EMIFD00 Y27 DDRD55 C3 DDRWE E12 EMIFD01 AB29 DDRD56 F4 DVDD15 AA29 D2 EMIFD03 Y26 DDRD58 E2 EMIFD04 AA27 DDRD59 C2 EMIFD05 AB27 DDRD60 F2 EMIFD06 AA26 DDRD61 F3 A2, A11, A17, A28, B1, B29, C14, C25, D5, D8, D20, D23, E3, F5, F7, F9, F11, F17, F19, F26, F28, G2, G4, G8, G10, G12, G14, G16, G18, G20, G23 EMIFD02 DDRD57 EMIFD07 AA25 DDRD62 E1 EMIFD08 Y25 DDRD63 F1 EMIFD09 AB25 DDRDQM0 E29 DDRDQM1 C27 DDRDQM2 A25 DDRDQM3 A22 DDRDQM4 A10 DDRDQM5 A8 DDRDQM6 B5 DDRDQM7 B2 DDRDQM8 A20 DDRDQS0N C29 DDRDQS0P C28 DDRDQS1N B27 DDRDQS1P A27 DDRDQS2N B24 DDRDQS2P A24 DDRDQS3N B21 DDRDQS3P A21 DDRDQS4N B9 DDRDQS4P A9 DDRDQS5N A6 Copyright 2010 Texas Instruments Incorporated DVDD18 EMIFA00 H24, N28, P23, T23, U26, V23, Y7, Y23, AA6, AB5, AB7, AB19, AB21, AB28, AC3, AF5, AF26, AG22, AH1, AH29, AJ2, AJ28 T27 EMIFA01 T24 EMIFA02 U29 EMIFA03 T25 EMIFA04 U27 EMIFA05 U28 EMIFA06 U25 EMIFA07 U24 EMIFA08 V28 EMIFA09 V29 EMIFA10 V27 EMIFA11 V26 EMIFA12 V25 EMIFA13 V24 EMIFA14 W28 EMIFA15 W27 EMIFA16 W29 EMIFA17 W26 EMIFD10 AA24 EMIFD11 Y24 EMIFD12 AB23 EMIFD13 AB24 EMIFD14 AB26 EMIFD15 AC25 EMIFOE R26 EMIFRW P26 EMIFWAIT0 T29 EMIFWAIT1 T28 EMIFWE P24 EMU00 AC29 EMU01 AC28 EMU02 AC27 EMU03 AC26 EMU04 AD29 EMU05 AD28 EMU06 AD27 EMU07 AE29 EMU08 AE28 Device Overview ADVANCE INFORMATION www.ti.com 47 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-17 Terminal Functions — By Signal Name (Part 7 of 13) www.ti.com Table 2-17 Terminal Functions — By Signal Name (Part 8 of 13) Table 2-17 Terminal Functions — By Signal Name (Part 9 of 13) ADVANCE INFORMATION Signal Name Ball Number Signal Name Ball Number Signal Name Ball Number EMU09 AF29 MCMRXN2 M1 RESETSTAT N27 EMU10 AE27 MCMRXN3 P2 RESET M29 EMU11 AF28 MCMRXP0 T2 RIORXN0 AJ11 EMU12 AG29 MCMRXP1 R1 RIORXN1 AH10 EMU13 AD26 MCMRXP2 N1 RIORXN2 AH14 EMU14 AG28 MCMRXP3 N2 RIORXN3 AJ15 EMU15 AG27 MCMRXPMCLK Y3 RIORXP0 AJ12 EMU16 AJ27 MCMRXPMDAT Y4 RIORXP1 AH11 EMU17 AF27 MCMTXFLCLK AA1 RIORXP2 AH13 EMU18 AH27 MCMTXFLDAT AA3 RIORXP3 AJ14 FSA0 AJ26 MCMTXN0 M5 RIOTXN0 AF10 FSA1 AG23 MCMTXN1 T4 RIOTXN1 AG11 FSB0 AG26 MCMTXN2 R5 RIOTXN2 AG15 FSB1 AJ22 MCMTXN3 N4 RIOTXN3 AF14 GPIO00 H25 MCMTXP0 N5 RIOTXP0 AF11 GPIO01 J28 MCMTXP1 U4 RIOTXP1 AG12 GPIO02 J29 MCMTXP2 T5 RIOTXP2 AG14 GPIO03 J26 MCMTXP3 P4 RIOTXP3 AF13 GPIO04 J25 MCMTXPMCLK AA2 RSV01 AH28 GPIO05 J27 MCMTXPMDAT AA4 RSV02 N24 GPIO06 J24 MDCLK H26 RSV03 N23 GPIO07 K27 MDIO G26 RSV04 AH2 GPIO08 K28 NMI M25 RSV05 AJ3 GPIO09 K26 PACLKSEL AE4 RSV06 H28 GPIO10 K29 PASSCLKN AJ4 RSV07 G28 GPIO11 L28 PASSCLKP AJ5 RSV08 AH19 GPIO12 L29 PCIECLKN AH5 RSV09 AF19 GPIO13 K25 PCIECLKP AG5 RSV0A AA21 GPIO14 K24 PCIERXN0 AH7 RSV0B AA20 GPIO15 L27 PCIERXN1 AJ9 RSV10 K22 HOUT AD20 PCIERXP0 AH8 RSV11 J22 LENDIAN † H25 PCIERXP1 AJ8 RSV12 Y5 LRESETNMIEN M27 PCIESSMODE0 † K24 RSV13 W5 LRESET N26 PCIESSMODE1 † L27 RSV14 W6 MCMCLKN Y2 PCIESSEN † L24 RSV15 AE12 MCMCLKP W2 PCIETXN0 AF8 RSV16 AC9 MCMREFCLKOUTN W1 PCIETXN1 AG9 RSV17 AD19 MCMREFCLKOUTP Y1 PCIETXP0 AF7 RSV20 AF3 MCMRXFLCLK W3 PCIETXP1 AG8 RSV21 G25 MCMRXFLDAT W4 POR AC20 RSV22 AF1 MCMRXN0 U2 PTV15 G22 RSV24 AH4 MCMRXN1 T1 RESETFULL N25 RSV25 AH3 48 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-17 Signal Name Terminal Functions — By Signal Name (Part 10 of 13) Table 2-17 Terminal Functions — By Signal Name (Part 11 of 13) Ball Number Signal Name SCL AD3 SDA AC4 SGMII0RXN AJ18 TX01 AD25 SGMII0RXP AJ17 TX02 AJ24 SGMII0TXN AG18 TX03 AG24 SGMII0TXP AG17 TX04 AH24 SGMII1RXN AH17 TX05 AF24 SGMII1RXP AH16 TX06 AE23 SGMII1TXN AF17 TX07 AF23 SGMII1TXP AF16 TX10 AF21 SPICLK AE1 TX11 AD22 SPIDIN AD2 TX12 AC22 SPIDOUT AB1 TX13 AE21 SPISCS0 AG1 TX14 AG20 SPISCS1 AG2 TX15 AE20 SRIOSGMIICLKN AJ6 TX16 AH20 SRIOSGMIICLKP AG6 TX17 AF20 SYSCLKOUT AE3 UARTCTS AB3 TCK N29 UARTRTS AB2 TDI P27 UARTRXD AD1 TDO R29 UARTTXD AC1 TIMI0 L24 VCL M24 TIMI1 L26 VCNTL0 L23 TIMO0 L25 VCNTL1 K23 TIMO1 M26 VCNTL2 J23 TMS P29 VCNTL3 H23 TR00 AH26 VD M23 TR01 AJ25 VDDR1 V5 TR02 AD23 VDDR2 AE10 TR03 AD24 VDDR3 AE16 TR04 AC23 VDDR4 AE14 TR05 AH25 VDDT1 TR06 AC24 M7, N6, P7, R6, T7, U6, V7 TR07 AE25 VDDT2 AB9, AB11, AB13, AB15, AB17, AC8, AC10, AC12, AC14, AC16, AC18, AD7, AD9, AD11, AD13, AD15, AD17, AE18 VREFSSTL E14 TR10 AE22 TR11 AD21 TR12 AC21 TR13 AJ21 TR14 AH22 TR15 AJ20 TR16 AH21 TR17 AG21 Copyright 2010 Texas Instruments Incorporated Table 2-17 Terminal Functions — By Signal Name (Part 12 of 13) Ball Number Signal Name Ball Number TRST P28 VSS TX00 AE24 A1, A29, B11, B17, B25, C8, C23, D3, D14, D18, E5, E20, F6, F8, F10, F12, F16, F18, F27, F29, G1, G3, G5, G6, G7, G9, G11, G13, G15, G17, G19, G21, G24, VSS H1, H2, H3, H4, H5, H6, H8, H10, H12, H14, H16, H18, H20, J1, J2, J3, J4, J5, J6, J7, J9, J11, J13, J15, J17, J19, J21, K1, K2, K3, K4, K5, K6, K8, K10, K12, K14, K16, VSS K18, K20, L1, L2, L3, L4, L5, L6, L7, L9, L11, L13, L15, L17, L19, L21, M2, M3, M4, M6, M8, M10, M12, M14, M16, M18, M20, M22, M28, N3, N7, N9, VSS N11, N13, N15, N17, N19, N21, P1, P3, P5, P6, P8, P10, P12, P14, P16, P18, P20, P22, R2, R3, R4, R7, R9, R11, R13, R15, R17, R19, R21, T3, T6, T8, T10, T12, VSS T14, T16, T18, T20, T22, T26, U1, U3, U5, U7, U9, U11, U13, U15, U17, U19, U21, V1, V2, V3, V4, V6, V8, V10, V12, V14, V16, V18, V20, V22, W7, W9, W11, VSS W13, W15, W17, W19, W21, Y6, Y8, Y10, Y12, Y14, Y16, Y18, Y20, Y22, AA5, AA7, AA9, AA11, AA13, AA15, AA17, AA19, AA23, AA28, AB4, AB6, AB8, VSS AB10, AB12, AB14, AB16, AB18, AB20, AB22, AC2, AC5, AC7, AC11, AC13, AC15, AC17, AC19, AD6, AD8, AD10, AD12, AD14, AD16, AD18, AE7, AE8, Device Overview ADVANCE INFORMATION www.ti.com 49 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-17 www.ti.com Terminal Functions — By Signal Name (Part 13 of 13) ADVANCE INFORMATION Signal Name Ball Number VSS AE9, AE11, AE13, AE15, AE17, AE19, AE26, AF4, AF6, AF9, AF12, AF15, AF18, AF22AG7, AG10, AG13, AG16, AG19, AH6, AH9, AH12, AH15, AH18, VSS AJ1, AJ7, AJ10, AJ13, AJ16, AJ19, AJ29 End of Table 2-17 50 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-18 Terminal Functions — By Ball Number (Part 1 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 2 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 3 of 21) Signal Name Ball Number Signal Name Ball Number Signal Name A1 VSS B14 DDRA01 C27 DDRDQM1 A2 DVDD15 B15 DDRA06 C28 DDRDQS0P A3 DDRDQS6N B16 DDRCLKOUTN1 C29 DDRDQS0N A4 DDRD51 B17 VSS D1 DDRDQS7P A5 DDRD49 B18 DDRCB06 D2 DDRD57 A6 DDRDQS5N B19 DDRDQS8N D3 VSS A7 DDRD40 B20 DDRCB03 D4 DDRD52 A8 DDRDQM5 B21 DDRDQS3N D5 DVDD15 A9 DDRDQS4P B22 DDRD30 D6 DDRD46 A10 DDRDQM4 B23 DDRD21 D7 DDRD41 A11 DVDD15 B24 DDRDQS2N D8 DVDD15 A12 DDRCLKOUTP0 B25 VSS D9 DDRD35 A13 DDRBA0 B26 DDRD14 D10 DDRD33 A14 DDRA00 B27 DDRDQS1N D11 DDRCKE0 A15 DDRA04 B28 DDRD05 D12 DDRCAS A16 DDRCLKOUTP1 B29 DVDD15 D13 DDRODT0 A17 DVDD15 C1 DDRDQS7N D14 VSS A18 DDRCB07 C2 DDRD59 D15 DDRA07 A19 DDRDQS8P C3 DDRD55 D16 DDRA11 A20 DDRDQM8 C4 DDRD54 D17 DDRA14 A21 DDRDQS3P C5 DDRD48 D18 VSS A22 DDRDQM3 C6 DDRD47 D19 DDRCB02 A23 DDRD20 C7 DDRD43 D20 DVDD15 A24 DDRDQS2P C8 VSS D21 DDRD24 A25 DDRDQM2 C9 DDRD37 D22 DDRD28 A26 DDRD15 C10 DDRRAS D23 DVDD15 A27 DDRDQS1P C11 DDRCE0 D24 DDRD18 A28 DVDD15 C12 DDRCE1 D25 DDRD11 A29 VSS C13 DDRBA2 D26 DDRD12 B1 DVDD15 C14 DVDD15 D27 DDRD04 B2 DDRDQM7 C15 DDRA05 D28 DDRD03 B3 DDRDQS6P C16 DDRA13 D29 DDRD01 B4 DDRD50 C17 DDRA15 E1 DDRD62 B5 DDRDQM6 C18 DDRCB05 E2 DDRD58 B6 DDRDQS5P C19 DDRCB04 E3 DVDD15 B7 DDRD44 C20 DDRCB01 E4 DDRD53 B8 DDRD38 C21 DDRD29 E5 VSS B9 DDRDQS4N C22 DDRD31 E6 DDRD45 B10 DDRD34 C23 VSS E7 DDRD42 B11 VSS C24 DDRD22 E8 DDRD39 B12 DDRCLKOUTN0 C25 DVDD15 E9 DDRD36 B13 DDRBA1 C26 DDRD13 E10 DDRD32 Ball Number Copyright 2010 Texas Instruments Incorporated Device Overview ADVANCE INFORMATION www.ti.com 51 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-18 Terminal Functions — By Ball Number (Part 4 of 21) www.ti.com Table 2-18 Terminal Functions — By Ball Number (Part 5 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 6 of 21) ADVANCE INFORMATION Ball Number Signal Name Ball Number Signal Name Ball Number E11 DDRRESET F24 DDRD08 H8 VSS E12 DDRWE F25 DDRD07 H9 CVDD E13 DDRODT1 F26 DVDD15 H10 VSS E14 VREFSSTL F27 VSS H11 CVDD E15 DDRA09 F28 DVDD15 H12 VSS E16 DDRA10 F29 VSS H13 CVDD E17 DDRA12 G1 VSS H14 VSS E18 DDRCKE1 G2 DVDD15 H15 CVDD E19 DDRCB00 G3 VSS H16 VSS E20 VSS G4 DVDD15 H17 CVDD E21 DDRD26 G5 VSS H18 VSS E22 DDRD23 G6 VSS H19 CVDD E23 DDRD19 G7 VSS H20 VSS E24 DDRD09 G8 DVDD15 H21 CVDD E25 DDRD10 G9 VSS H22 AVDDA1 E26 DDRD06 G10 DVDD15 H23 VCNTL3 E27 DDRD02 G11 VSS H24 DVDD18 E28 DDRD00 G12 DVDD15 H25 GPIO00 E29 DDRDQM0 G13 VSS H25 LENDIAN † F1 DDRD63 G14 DVDD15 H26 MDCLK F2 DDRD60 G15 VSS H27 DDRSLRATE1 F3 DDRD61 G16 DVDD15 H28 RSV06 F4 DDRD56 G17 VSS H29 DDRCLKN F5 DVDD15 G18 DVDD15 J1 VSS F6 VSS G19 VSS J2 VSS F7 DVDD15 G20 DVDD15 J3 VSS F8 VSS G21 VSS J4 VSS F9 DVDD15 G22 PTV15 J5 VSS F10 VSS G23 DVDD15 J6 VSS F11 DVDD15 G24 VSS J7 VSS F12 VSS G25 RSV21 J8 CVDD1 F13 DDRA03 G26 MDIO J9 VSS F14 DDRA02 G27 DDRSLRATE0 J10 CVDD F15 DDRA08 G28 RSV07 J11 VSS F16 VSS G29 DDRCLKP J12 CVDD F17 DVDD15 H1 VSS J13 VSS F18 VSS H2 VSS J14 CVDD1 F19 DVDD15 H3 VSS J15 VSS F20 DDRD25 H4 VSS J16 CVDD F21 DDRD27 H5 VSS J17 VSS F22 DDRD17 H6 VSS J18 CVDD F23 DDRD16 H7 CVDD J19 VSS 52 Device Overview Signal Name Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-18 Ball Number Terminal Functions — By Ball Number (Part 7 of 21) Table 2-18 Signal Name Ball Number J20 CVDD J21 VSS J22 RSV11 J23 VCNTL2 J24 GPIO06 J24 BOOTMODE05 † J25 GPIO04 J25 BOOTMODE03 † J26 GPIO03 J26 BOOTMODE02 † J27 J27 Terminal Functions — By Ball Number (Part 8 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 9 of 21) Signal Name Ball Number Signal Name K25 BOOTMODE12 † M1 MCMRXN2 K26 GPIO09 M2 VSS K26 BOOTMODE08 † M3 VSS K27 GPIO07 M4 VSS K27 BOOTMODE06 † M5 MCMTXN0 K28 GPIO08 M6 VSS K28 BOOTMODE07 † M7 VDDT1 K29 GPIO10 M8 VSS K29 BOOTMODE09 † M9 CVDD1 L1 VSS M10 VSS GPIO05 L2 VSS M11 CVDD BOOTMODE04 † L3 VSS M12 VSS J28 GPIO01 L4 VSS M13 CVDD J28 BOOTMODE00 † L5 VSS M14 VSS J29 GPIO02 L6 VSS M15 CVDD J29 BOOTMODE01† L7 VSS M16 VSS K1 VSS L8 CVDD1 M17 CVDD K2 VSS L9 VSS M18 VSS K3 VSS L10 CVDD M19 CVDD K4 VSS L11 VSS M20 VSS K5 VSS L12 CVDD M21 CVDD1 K6 VSS L13 VSS M22 VSS K7 CVDD1 L14 CVDD1 M23 VD K8 VSS L15 VSS M24 VCL K9 CVDD1 L16 CVDD M25 NMI K10 VSS L17 VSS M26 TIMO1 K11 CVDD L18 CVDD M27 LRESETNMIEN K12 VSS L19 VSS M28 VSS K13 CVDD1 L20 CVDD1 M29 RESET K14 VSS L21 VSS N1 MCMRXP2 K15 CVDD1 L22 CVDD1 N2 MCMRXP3 K16 VSS L23 VCNTL0 N3 VSS K17 CVDD L24 TIMI0 N4 MCMTXN3 K18 VSS L24 PCIESSEN † N5 MCMTXP0 K19 CVDD L25 TIMO0 N6 VDDT1 K20 VSS L26 TIMI1 N7 VSS K21 CVDD L27 GPIO15 N8 CVDD K22 RSV10 L27 PCIESSMODE1 † N9 VSS K23 VCNTL1 L28 GPIO11 N10 CVDD K24 GPIO14 L28 BOOTMODE10 † N11 VSS K24 PCIESSMODE0 † L29 GPIO12 N12 CVDD K25 GPIO13 L29 BOOTMODE11 † N13 VSS Copyright 2010 Texas Instruments Incorporated Device Overview ADVANCE INFORMATION www.ti.com 53 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-18 Ball Number Terminal Functions — By Ball Number (Part 10 of 21) www.ti.com Table 2-18 Terminal Functions — By Ball Number (Part 11 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 12 of 21) ADVANCE INFORMATION Signal Name Ball Number Signal Name Ball Number N14 CVDD P27 TDI T11 CVDD N15 VSS P28 TRST T12 VSS N16 CVDD P29 TMS T13 CVDD N17 VSS R1 MCMRXP1 T14 VSS N18 CVDD R2 VSS T15 CVDD N19 VSS R3 VSS T16 VSS N20 CVDD1 R4 VSS T17 CVDD N21 VSS R5 MCMTXN2 T18 VSS N22 CVDD1 R6 VDDT1 T19 CVDD N23 RSV03 R7 VSS T20 VSS N24 RSV02 R8 CVDD T21 CVDD N25 RESETFULL R9 VSS T22 VSS N26 LRESET R10 CVDD T23 DVDD18 N27 RESETSTAT R11 VSS T24 EMIFA01 N28 DVDD18 R12 CVDD1 T25 EMIFA03 N29 TCK R13 VSS T26 VSS P1 VSS R14 CVDD1 T27 EMIFA00 P2 MCMRXN3 R15 VSS T28 EMIFWAIT1 P3 VSS R16 CVDD1 T29 EMIFWAIT0 P4 MCMTXP3 R17 VSS U1 VSS P5 VSS R18 CVDD U2 MCMRXN0 P6 VSS R19 VSS U3 VSS P7 VDDT1 R20 CVDD U4 MCMTXP1 P8 VSS R21 VSS U5 VSS P9 CVDD R22 CVDD U6 VDDT1 P10 VSS R23 EMIFBE1 U7 VSS P11 CVDD R24 EMIFBE0 U8 CVDD P12 VSS R25 EMIFCE3 U9 VSS P13 CVDD R26 EMIFOE U10 CVDD P14 VSS R27 EMIFCE1 U11 VSS P15 CVDD R28 EMIFCE2 U12 CVDD1 P16 VSS R29 TDO U13 VSS P17 CVDD T1 MCMRXN1 U14 CVDD1 P18 VSS T2 MCMRXP0 U15 VSS P19 CVDD T3 VSS U16 CVDD1 P20 VSS T4 MCMTXN1 U17 VSS P21 CVDD T5 MCMTXP2 U18 CVDD P22 VSS T6 VSS U19 VSS P23 DVDD18 T7 VDDT1 U20 CVDD P24 EMIFWE T8 VSS U21 VSS P25 EMIFCE0 T9 CVDD U22 CVDD P26 EMIFRW T10 VSS U23 EMIFA23 54 Device Overview Signal Name Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-18 Terminal Functions — By Ball Number (Part 13 of 21) Table 2-18 Ball Number Signal Name Ball Number U24 EMIFA07 U25 EMIFA06 U26 DVDD18 U27 EMIFA04 U28 U29 Terminal Functions — By Ball Number (Part 14 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 15 of 21) Signal Name Ball Number W8 CVDD Y21 CVDD W9 VSS Y22 VSS W10 CVDD Y23 DVDD18 W11 VSS Y24 EMIFD11 EMIFA05 W12 CVDD1 Y25 EMIFD08 EMIFA02 W13 VSS Y26 EMIFD03 V1 VSS W14 CVDD1 Y27 EMIFD00 V2 VSS W15 VSS Y28 EMIFA22 V3 VSS W16 CVDD1 Y29 EMIFA21 V4 VSS W17 VSS AA1 MCMTXFLCLK V5 VDDR1 W18 CVDD AA2 MCMTXPMCLK V6 VSS W19 VSS AA3 MCMTXFLDAT V7 VDDT1 W20 CVDD AA4 MCMTXPMDAT V8 VSS W21 VSS AA5 VSS V9 CVDD W22 CVDD AA6 DVDD18 V10 VSS W23 EMIFA20 AA7 VSS V11 CVDD W24 EMIFA19 AA8 CVDD V12 VSS W25 EMIFA18 AA9 VSS V13 CVDD1 W26 EMIFA17 AA10 CVDD V14 VSS W27 EMIFA15 AA11 VSS V15 CVDD1 W28 EMIFA14 AA12 CVDD V16 VSS W29 EMIFA16 AA13 VSS V17 CVDD Y1 MCMREFCLKOUTP AA14 CVDD V18 VSS Y2 MCMCLKN AA15 VSS V19 CVDD Y3 MCMRXPMCLK AA16 CVDD V20 VSS Y4 MCMRXPMDAT AA17 VSS V21 CVDD Y5 RSV12 AA18 CVDD V22 VSS Y6 VSS AA19 VSS V23 DVDD18 Y7 DVDD18 AA20 RSV0B V24 EMIFA13 Y8 VSS AA21 RSV0A V25 EMIFA12 Y9 CVDD AA22 CVDD V26 EMIFA11 Y10 VSS AA23 VSS V27 EMIFA10 Y11 CVDD AA24 EMIFD10 V28 EMIFA08 Y12 VSS AA25 EMIFD07 V29 EMIFA09 Y13 CVDD AA26 EMIFD06 W1 MCMREFCLKOUTN Y14 VSS AA27 EMIFD04 W2 MCMCLKP Y15 CVDD AA28 VSS W3 MCMRXFLCLK Y16 VSS AA29 EMIFD02 W4 MCMRXFLDAT Y17 CVDD AB1 SPIDOUT W5 RSV13 Y18 VSS AB2 UARTRTS W6 RSV14 Y19 CVDD AB3 UARTCTS W7 VSS Y20 VSS AB4 VSS Copyright 2010 Texas Instruments Incorporated Signal Name Device Overview ADVANCE INFORMATION www.ti.com 55 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 2-18 Terminal Functions — By Ball Number (Part 16 of 21) www.ti.com Table 2-18 Terminal Functions — By Ball Number (Part 17 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 18 of 21) ADVANCE INFORMATION Ball Number Signal Name Ball Number Signal Name Ball Number Signal Name AB5 DVDD18 AC18 VDDT2 AE2 BOOTCOMPLETE AB6 VSS AC19 VSS AE3 SYSCLKOUT AB7 DVDD18 AC20 POR AE4 PACLKSEL AB8 VSS AC21 TR12 AE5 CORESEL3 AB9 VDDT2 AC22 TX12 AE6 CORESEL2 AB10 VSS AC23 TR04 AE7 VSS AB11 VDDT2 AC24 TR06 AE8 VSS AB12 VSS AC25 EMIFD15 AE9 VSS AB13 VDDT2 AC26 EMU03 AE10 VDDR2 AB14 VSS AC27 EMU02 AE11 VSS AB15 VDDT2 AC28 EMU01 AE12 RSV15 AB16 VSS AC29 EMU00 AE13 VSS AB17 VDDT2 AD1 UARTRXD AE14 VDDR4 AB18 VSS AD2 SPIDIN AE15 VSS AB19 DVDD18 AD3 SCL AE16 VDDR3 AB20 VSS AD4 CORESEL1 AE17 VSS AB21 DVDD18 AD5 AVDDA3 AE18 VDDT2 AB22 VSS AD6 VSS AE19 VSS AB23 EMIFD12 AD7 VDDT2 AE20 TX15 AB24 EMIFD13 AD8 VSS AE21 TX13 AB25 EMIFD09 AD9 VDDT2 AE22 TR10 AB26 EMIFD14 AD10 VSS AE23 TX06 AB27 EMIFD05 AD11 VDDT2 AE24 TX00 AB28 DVDD18 AD12 VSS AE25 TR07 AB29 EMIFD01 AD13 VDDT2 AE26 VSS AC1 UARTTXD AD14 VSS AE27 EMU10 AC2 VSS AD15 VDDT2 AE28 EMU08 AC3 DVDD18 AD16 VSS AE29 EMU07 AC4 SDA AD17 VDDT2 AF1 RSV22 AC5 VSS AD18 VSS AF2 CORESEL0 AC6 AVDDA2 AD19 RSV17 AF3 RSV20 AC7 VSS AD20 HOUT AF4 VSS AC8 VDDT2 AD21 TR11 AF5 DVDD18 AC9 RSV16 AD22 TX11 AF6 VSS AC10 VDDT2 AD23 TR02 AF7 PCIETXP0 AC11 VSS AD24 TR03 AF8 PCIETXN0 AC12 VDDT2 AD25 TX01 AF9 VSS AC13 VSS AD26 EMU13 AF10 RIOTXN0 AC14 VDDT2 AD27 EMU06 AF11 RIOTXP0 AC15 VSS AD28 EMU05 AF12 VSS AC16 VDDT2 AD29 EMU04 AF13 RIOTXP3 AC17 VSS AE1 SPICLK AF14 RIOTXN3 56 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Ball Number Terminal Functions — By Ball Number (Part 19 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 20 of 21) Table 2-18 Terminal Functions — By Ball Number (Part 21 of 21) Signal Name Ball Number Signal Name Ball Number AF15 VSS AG28 EMU14 AJ12 RIORXP0 AF16 SGMII1TXP AG29 EMU12 AJ13 VSS AF17 SGMII1TXN AH1 DVDD18 AJ14 RIORXP3 AF18 VSS AH2 RSV04 AJ15 RIORXN3 AF19 RSV09 AH3 RSV25 AJ16 VSS AF20 TX17 AH4 RSV24 AJ17 SGMII0RXP AF21 TX10 AH5 PCIECLKN AJ18 SGMII0RXN AF22 VSS AH6 VSS AJ19 VSS AF23 TX07 AH7 PCIERXN0 AJ20 TR15 AF24 TX05 AH8 PCIERXP0 AJ21 TR13 AF25 CLKA0 AH9 VSS AJ22 FSB1 AF26 DVDD18 AH10 RIORXN1 AJ23 CLKA1 AF27 EMU17 AH11 RIORXP1 AJ24 TX02 AF28 EMU11 AH12 VSS AJ25 TR01 AF29 EMU09 AH13 RIORXP2 AJ26 FSA0 AG1 SPISCS0 AH14 RIORXN2 AJ27 EMU16 AG2 SPISCS1 AH15 VSS AJ28 DVDD18 AG3 CORECLKP AH16 SGMII1RXP AJ29 VSS AG4 CORECLKN AH17 SGMII1RXN AG5 PCIECLKP AH18 VSS AG6 SRIOSGMIICLKP AH19 RSV08 AG7 VSS AH20 TX16 AG8 PCIETXP1 AH21 TR16 AG9 PCIETXN1 AH22 TR14 AG10 VSS AH23 CLKB1 AG11 RIOTXN1 AH24 TX04 AG12 RIOTXP1 AH25 TR05 AG13 VSS AH26 TR00 AG14 RIOTXP2 AH27 EMU18 AG15 RIOTXN2 AH28 RSV01 AG16 VSS AH29 DVDD18 AG17 SGMII0TXP AJ1 VSS AG18 SGMII0TXN AJ2 DVDD18 AG19 VSS AJ3 RSV05 AG20 TX14 AJ4 PASSCLKN AG21 TR17 AJ5 PASSCLKP AG22 DVDD18 AJ6 SRIOSGMIICLKN AG23 FSA1 AJ7 VSS AG24 TX03 AJ8 PCIERXP1 AG25 CLKB0 AJ9 PCIERXN1 AG26 FSB0 AJ10 VSS AG27 EMU15 AJ11 RIORXN0 Copyright 2010 Texas Instruments Incorporated Signal Name ADVANCE INFORMATION Table 2-18 End of Table 2-18 Device Overview 57 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2.9 Development 2.9.1 Development Support In case the customer would like to develop their own features and software on the C6674 device, TI offers an extensive line of development tools for the TMS320C6000™ DSP platform, including tools to evaluate the performance of the processors, generate code, develop algorithm implementations, and fully integrate and debug software and hardware modules. The tool's support documentation is electronically available within the Code Composer Studio™ Integrated Development Environment (IDE). ADVANCE INFORMATION The following products support development of C6000™ DSP-based applications: • Software Development Tools: – Code Composer Studio™ Integrated Development Environment (IDE), including Editor C/C++/Assembly Code Generation, and Debug plus additional development tools – Scalable, Real-Time Foundation Software (DSP/BIOS™), which provides the basic run-time target software needed to support any DSP application. • Hardware Development Tools: – Extended Development System (XDS™) Emulator (supports C6000™ DSP multiprocessor system debug) – EVM (Evaluation Module) 2.9.2 Device Support 2.9.2.1 Device and Development-Support Tool Nomenclature To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all DSP devices and support tools. Each DSP commercial family member has one of three prefixes: TMX, TMP, or TMS (e.g., TMX320CMH). Texas Instruments recommends two of three possible prefix designators for its support tools: TMDX and TMDS. These prefixes represent evolutionary stages of product development from engineering prototypes (TMX/TMDX) through fully qualified production devices/tools (TMS/TMDS). Device development evolutionary flow: • TMX: Experimental device that is not necessarily representative of the final device's electrical specifications • TMP: Final silicon die that conforms to the device's electrical specifications but has not completed quality and reliability verification • TMS: Fully qualified production device Support tool development evolutionary flow: • TMDX: Development-support product that has not yet completed Texas Instruments internal qualification testing. • TMDS: Fully qualified development-support product TMX and TMP devices and TMDX development-support tools are shipped with the following disclaimer: "Developmental product is intended for internal evaluation purposes." TMS devices and TMDS development-support tools have been characterized fully, and the quality and reliability of the device have been demonstrated fully. TI's standard warranty applies. Predictions show that prototype devices (TMX or TMP) have a greater failure rate than the standard production devices. Texas Instruments recommends that these devices not be used in any production system because their expected end-use failure rate still is undefined. Only qualified production devices are to be used. 58 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Related Documentation from Texas Instruments 64-bit Timer (Timer 64) for KeyStone Devices User Guide SPRUGV5 Antenna Interface 2 (AIF2) for KeyStone Devices User Guide SPRUGV7 Bootloader for the C66x DSP User Guide SPRUGY5 C66x CorePac User Guide SPRUGW0 C66x CPU and Instruction Set Reference Guide SPRUGH7 C66x DSP Cache User Guide SPRUGY8 DDR3 Design Guide for KeyStone Devices SPRABI1 Emulation and Trace Headers Technical Reference SPRU655 Enhanced Direct Memory Access 3 (EDMA3) for KeyStone Devices User Guide SPRUGS5 Ethernet Media Access Control (EMAC) for KeyStone Devices User Guide SPRUGV9 External Memory Interface (EMIF16) for KeyStone Devices User Guide SPRUGZ3 Fast Fourier Transform Coprocessor (FFTC) for KeyStone Devices User Guide SPRUGS2 General Purpose Input/Output (GPIO) for KeyStone Devices User Guide SPRUGV1 Hardware Design Guide for KeyStone Devices SPRABI2 HyperLink for KeyStone Devices User Guide SPRUGW8 2 Inter Integrated Circuit (I C) for KeyStone Devices User Guide SPRUGV3 Interrupt Controller (INTC) for KeyStone Devices User Guide SPRUGW4 Memory Protection Unit (MPU) for KeyStone Devices User Guide SPRUGW5 Multicore Navigator for KeyStone Devices User Guide SPRUGR9 Multicore Shared Memory Controller (MSMC) for KeyStone Devices User Guide SPRUGW7 Packet Accelerator (PA) for KeyStone Devices User Guide SPRUGS4 Peripheral Component Interconnect Express (PCIe) for KeyStone Devices User Guide SPRUGS6 Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide SPRUGV2 Power Management for KeyStone Devices SPRABH0 Power Sleep Controller (PSC) for KeyStone Devices User Guide SPRUGV4 Serial Peripheral Interface (SPI) for KeyStone Devices User Guide SPRUGP2 Serial RapidIO (SRIO) for KeyStone Devices User Guide SPRUGW1 Telecom Serial Interface Port (TSIP) for the C66x DSP User Guide SPRUGY4 Universal Asynchronous Receiver/Transmitter (UART) for KeyStone Devices User Guide SPRUGP1 Using Advanced Event Triggering to Debug Real-Time Problems in High Speed Embedded Microprocessor Systems SPRA387 Using Advanced Event Triggering to Find and Fix Intermittent Real-Time Bugs SPRA753 Copyright 2010 Texas Instruments Incorporated Device Overview ADVANCE INFORMATION These documents describe the TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor. Copies of these documents are available on the Internet at www.ti.com 59 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com ADVANCE INFORMATION 60 Device Overview Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 3 Device Configuration On the TMS320C6674 device, certain device configurations like boot mode and endianess, are selected at device power-on reset. The status of the peripherals (enabled/disabled) is determined after device power-on reset. By default, the peripherals on the device are disabled and need to be enabled by software before being used. Table 3-1 describes the device configuration pins. The logic level is latched at power-on reset to determine the device configuration. The logic level on the device configuration pins can be set by using external pullup/pulldown resistors or by using some control device (e.g., FPGA/CPLD) to intelligently drive these pins. When using a control device, care should be taken to ensure there is no contention on the lines when the device is out of reset. The device configuration pins are sampled during power-on reset and are driven after the reset is removed. To avoid contention, the control device must stop driving the device configuration pins of the DSP. Note—If a configuration pin must be routed out from the device and it is not driven (Hi-Z state), the internal pullup/pulldown (IPU/IPD) resistor should not be relied upon. TI recommends the use of an external pullup/pulldown resistor. For more detailed information on pullup/pulldown resistors and situations in which external pullup/pulldown resistors are required, see Section 3.4 ‘‘Pullup/Pulldown Resistors’’ on page 77. Table 3-1 TMS320C6674 Device Configuration Pins Configuration Pin Pin No. IPD/IPU (1) Functional Description (1) (2) H25 IPU Device endian mode (LENDIAN). 0 = Device operates in big endian mode 1 = Device operates in little endian mode BOOTMODE[12:0] (1) (2) J28, J29, J26, J25, J27, J24, K27, K28, K26, K29, L28, L29, K25 IPD Method of boot. L27, K24 IPD PCIe Subsystem mode selection. 00 = PCIe in end point mode 01 = PCIe legacy end point (no support for MSI) 10 = PCIe in root complex mode 11 = Reserved L24 IPD PCIe subsystem enable/disable. 0 = PCIE Subsystem is disabled 1 = PCIE Subsystem is enabled AE4 IPD Packet accelerator subsystem clock select. 0 = SYSCLK / ALTCORECLK (controlled by CORECLKSEL pin) is used as the input to PA_SS PLL 1 = PASSCLK is used as the input to PASS PLL LENDIAN PCIESSMODE[1:0] (1) (2) PCIESSEN (1) (2) PACLKSEL (1) Some pins may not be used by bootloader and can be used as general purpose config pins. Refer to the Bootloader for the C66x DSP User Guide (literature number SPRUGY5) for how to determine the device enumeration ID value. End of Table 3-1 1 Internal 100-μA pulldown or pullup is provided for this terminal. In most systems, a 1-kΩ resistor can be used to oppose the IPD/IPU. For more detailed information on pulldown/pullup resistors and situations in which external pulldown/pullup resistors are required, see Section 3.4 ‘‘Pullup/Pulldown Resistors’’ on page 77. 2 These signal names are the secondary functions of these pins. 3.2 Peripheral Selection After Device Reset Several of the peripherals on the TMS320C6674 are controlled by the Power Sleep Controller (PSC). By default, the PCIe, SRIO, and HyperLink are held in reset and clock-gated. The memories in these modules are also in a low-leakage sleep mode. Software is required to turn these memories on. Then, the software enables the modules (turns on clocks and de-asserts reset) before these modules can be used. Copyright 2010 Texas Instruments Incorporated Device Configuration 61 ADVANCE INFORMATION 3.1 Device Configuration at Device Reset TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com If one of the above modules is used in the selected ROM boot mode, the ROM code will automatically enable the module. All other modules come up enabled by default and there is no special software sequence to enable. For more detailed information on the PSC usage, see the Power Sleep Controller (PSC) for KeyStone Devices User Guide (literature number SPRUGV4). 3.3 Device State Control Registers The TMS320C6674 device has a set of registers that are used to control the status of its peripherals. These registers are shown in Table 3-2. ADVANCE INFORMATION Table 3-2 Device State Control Registers (Part 1 of 3) Address Start Address End Size Acronym 0x02620000 0x02620007 8B Reserved Description 0x02620008 0x02620017 16B Reserved 0x02620018 0x0262001B 4B JTAGID 0x0262001C 0x0262001F 4B Reserved 0x02620020 0x02620023 4B DEVSTAT 0x02620024 0x02620037 20B Reserved 0x02620038 0x0262003B 4B KICK0 0x0262003C 0x0262003F 4B KICK1 0x02620040 0x02620043 4B DSP_BOOT_ADDR0 The boot address for C66x DSP CorePac 0 0x02620044 0x02620047 4B DSP_BOOT_ADDR1 The boot address for C66x DSP CorePac 1 0x02620048 0x0262004B 4B DSP_BOOT_ADDR2 The boot address for C66x DSP CorePac 2 The boot address for C66x DSP CorePac 3 See section 3.3.3 See section 3.3.1 See section 3.3.4 0x0262004C 0x0262004F 4B DSP_BOOT_ADDR3 0x02620050 0x02620053 4B Reserved 0x02620054 0x02620057 4B Reserved 0x02620058 0x0262005B 4B Reserved 0x0262005C 0x0262005F 4B Reserved 0x02620060 0x026200DF 128B Reserved 0x026200E0 0x0262010F 48B Reserved 0x02620110 0x02620117 8B MACID 0x02620118 0x0262012F 24B Reserved 0x02620130 0x02620133 4B LRSTNMIPIN See section 3.3.6 See section 3.3.8 0x02620134 0x02620137 4B RESET_STAT_CLR 0x02620138 0x0262013B 4B Reserved 0x0262013C 0x0262013F 4B BOOTCOMPLETE 0x02620140 0x02620143 4B Reserved See section 7.19 ‘‘Ethernet MAC (EMAC)’’ on page 190 See section 3.3.9 0x02620144 0x02620147 4B RESET_STAT See section 3.3.7 0x02620148 0x0262014B 4B LRSTNMIPINSTAT See section 3.3.5 0x0262014C 0x0262014F 4B DEVCFG See section 3.3.2 0x02620150 0x02620153 4B PWRSTATECTL See section 3.3.10 0x02620154 0x0262017F 44B Reserved 0x02620180 0x02620183 4B Reserved 0x02620184 0x0262018F 12B Reserved 62 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Device State Control Registers (Part 2 of 3) Address Start Address End Size Acronym 0x02620190 0x02620193 4B Reserved 0x02620194 0x02620197 4B Reserved 0x02620198 0x0262019B 4B Reserved 0x0262019C 0x0262019F 4B Reserved 0x026201A0 0x026201A3 4B Reserved 0x026201A4 0x026201A7 4B Reserved 0x026201A8 0x026201AB 4B Reserved 0x026201AC 0x026201AF 4B Reserved 0x026201B0 0x026201B3 4B Reserved 0x026201B4 0x026201B7 4B Reserved 0x026201B8 0x026201BB 4B Reserved 0x026201BC 0x026201BF 4B Reserved 0x026201C0 0x026201C3 4B Reserved 0x026201C4 0x026201C7 4B Reserved 0x026201C8 0x026201CB 4B Reserved 0x026201CC 0x026201CF 4B Reserved 0x026201D0 0x026201FF 48B Reserved 0x02620200 0x02620203 4B NMIGR0 0x02620204 0x02620207 4B NMIGR1 0x02620208 0x0262020B 4B NMIGR2 0x0262020C 0x0262020F 4B NMIGR3 0x02620210 0x02620213 4B NMIGR4 0x02620214 0x02620217 4B NMIGR5 0x02620218 0x0262021B 4B NMIGR6 0x0262021C 0x0262021F 4B NMIGR7 0x02620220 0x0262023F 32B Reserved 0x02620240 0x02620243 4B IPCGR0 0x02620244 0x02620247 4B IPCGR1 0x02620248 0x0262024B 4B IPCGR2 0x0262024C 0x0262024F 4B IPCGR3 0x02620250 0x02620253 4B IPCGR4 0x02620254 0x02620257 4B IPCGR5 0x02620258 0x0262025B 4B IPCGR6 0x0262025C 0x0262025F 4B IPCGR7 0x02620260 0x0262027B 28B Reserved Description See section 3.3.11 See section 3.3.12 0x0262027C 0x0262027F 4B IPCGRH See section 3.3.14 0x02620280 0x02620283 4B IPCAR0 See section 3.3.13 0x02620284 0x02620287 4B IPCAR1 0x02620288 0x0262028B 4B IPCAR2 0x0262028C 0x0262028F 4B IPCAR3 0x02620290 0x02620293 4B IPCAR4 0x02620294 0x02620297 4B IPCAR5 0x02620298 0x0262029B 4B IPCAR6 0x0262029C 0x0262029F 4B IPCAR7 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 3-2 Device Configuration 63 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-2 www.ti.com Device State Control Registers (Part 3 of 3) Address Start Address End Size Acronym 0x026202A0 0x026202BB 28B Reserved 0x026202BC 0x026202BF 4B IPCARH 0x026202C0 0x026202FF 64B Reserved Description See section 3.3.15 0x02620300 0x02620303 4B TINPSEL See section 3.3.16 0x02620304 0x02620307 4B TOUTPSEL See section 3.3.17 See section 3.3.18 ADVANCE INFORMATION 0x02620308 0x0262030B 4B RSTMUX0 0x0262030C 0x0262030F 4B RSTMUX1 0x02620310 0x02620313 4B RSTMUX2 0x02620314 0x02620317 4B RSTMUX3 0x02620318 0x0262031B 4B RSTMUX4 0x0262031C 0x0262031F 4B RSTMUX5 0x02620320 0x02620323 4B RSTMUX6 0x02620324 0x02620327 4B RSTMUX7 0x02620328 0x0262032B 4B MAINPLLCTL0 0x0262032C 0x0262032F 4B Reserved 0x02620330 0x02620333 4B DDR3PLLCTL0 0x02620334 0x02620337 4B Reserved 0x02620338 0x0262033B 4B PAPLLCTL0 0x0262033C 0x0262033F 4B Reserved See section 7.8 ‘‘Main PLL and PLL Controller’’ on page 209 See section 7.9 ‘‘DD3 PLL’’ on page 222 See section 7.10 ‘‘PASS PLL’’ on page 224 End of Table 3-2 3.3.1 Device Status Register The Device Status Register depicts the device configuration selected upon a power-on reset by either the POR or RESETFULL pin. Once set, these bits will remain set until a power-on reset. The Device Status Register is shown in Figure 3-1 and described in Table 3-3. Figure 3-1 Device Status Register 31 18 Reserved 17 16 PACLKSEL PCIESSEN PCIESSMODE[1:0 BOOTMODE[12:0] LENDIAN R-x R/W-xx R/W-xxxxxxxxxxxx R-x (1) R-0 15 14 13 1 0 Legend: R = Read only; RW = Read/Write; -n = value after reset 1 x indicates the bootstrap value latched via the external pin Table 3-3 Device Status Register Field Descriptions (Part 1 of 2) Bit Field Description 31-18 Reserved Reserved. Read only, writes have no effect. 17 PACLKSEL PA Clock select to select the reference clock for PA Sub-System PLL 0 = Selects PASSCLKP/N 1 = Selects output of Main PLL MUX (SYSCLK vs. ALTCORECLK - depending on CORECLKSEL pin) 16 PCIESSEN PCIe module enable 0 = PCIe module disabled 1 = PCIe module enabled 64 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Device Status Register Field Descriptions (Part 2 of 2) Bit Field Description 15-14 PCIESSMODE[1:0] PCIe Mode selection pins 00b = PCIe in End-point mode 01b = PCIe in Legacy End-point mode (no support for MSI) 10b = PCIe in Root complex mode 11b = Reserved 13-1 BOOTMODE[12:0] Determines the bootmode configured for the device. For more information on bootmode, refer to Section 2.5 ‘‘Boot Modes Supported and PLL Settings’’ on page 27 and see the Bootloader for the C66x DSP User Guide (literature number SPRUGY5). 0 LENDIAN Device Endian mode (LENDIAN) — Shows the status of whether the system is operating in Big Endian mode or Little Endian mode (default). 0 = System is operating in Big Endian mode 1 = System is operating in Little Endian mode (default) End of Table 3-3 3.3.2 Device Configuration Register The Device Configuration Register is one-time writeable through software. The register is reset on all hard resets and is locked after the first write. The Device Configuration Register is shown in Figure 3-2 and described in Table 3-4. Figure 3-2 Device Configuration Register (DEVCFG) 31 1 0 Reserved SYSCLKOUTEN R-0 R/W-1 Legend: R = Read only; RW = Read/Write; -n = value after reset Table 3-4 Bit 31:1 0 Device Configuration Register Field Descriptions Field Description Reserved Reserved. Read only, writes have no effect. SYSCLKOUTEN SYSCLKOUT Enable 0 = No clock output 1 = Clock output enabled (default) End of Table 3-4 3.3.3 JTAG ID (JTAGID) Register Description The JTAG ID register is a read-only register that identifies to the customer the JTAG/Device ID. For the device, the JTAG ID register resides at address location 0x0262 0018. The JTAG ID Register is shown in Figure 3-3 and described in Table 3-5. Figure 3-3 JTAG ID (JTAGID) Register 31 28 27 12 11 1 0 VARIANT PART NUMBER MANUFACTURER LSB R-0000 R-0000 0000 1001 1110b 0000 0010 111b R-1 Legend: RW = Read/Write; R = Read only; -n = value after reset Copyright 2010 Texas Instruments Incorporated Device Configuration 65 ADVANCE INFORMATION Table 3-3 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-5 Bit www.ti.com JTAG ID Register Field Descriptions Acronym Value Description 31-28 VARIANT 0000b Variant (4-Bit) value. The value of this field depends on the silicon revision being used. 27-12 PART NUMBER 0000 0000 1001 1110b Part Number for boundary scan 11-1 MANUFACTURER 0000 0010 111b Manufacturer LSB 1b This bit is read as a 1 for TMS320C6674 0 End of Table 3-5 3.3.4 Kicker Mechanism (KICK0 and KICK1) Register ADVANCE INFORMATION The Bootcfg module contains a kicker mechanism to prevent any spurious writes from changing any of the Bootcfg MMR values. When the kicker is locked (which it is initially after power on reset) none of the Bootcfg MMRs are writable (they are only readable). This mechanism requires two MMR writes to the KICK0 and KICK1 registers with exact data values before the kicker lock mechanism is un-locked. See Table 3-2 ‘‘Device State Control Registers’’ on page 62 for the address location. Once released then all the Bootcfg MMRs having “write” permissions are writable (the read only MMRs are still read only). The first KICK0 data is 0x83e70b13. The second KICK1 data is 0x95a4f1e0. Writing any other data value to either of these kick MMRs will lock the kicker mechanism and block any writes to Bootcfg MMRs. In order to ensure protection to all Bootcfg MMRs, software must always re-lock the kicker mechanism after completing the MMR writes. 3.3.5 LRESETNMI PIN Status (LRSTNMIPINSTAT) Register The LRSTNMIPINSTAT Register is created in Boot Configuration to latch the status of LRESET and NMI based on CORESEL. The LRESETNMI PIN Status Register is shown in Figure 3-4 and described in Table 3-6. Figure 3-4 LRESETNMI PIN Status Register (LRSTNMIPINSTAT) 31 20 19 18 17 16 Reserved NMI3 NMI2 NMI1 NMI0 R, +0000 0000 R-0 R-0 R-0 R-0 15 4 3 2 1 0 Reserved LR3 LR2 LR1 LR0 R, +0000 0000 R-0 R-0 R-0 R-0 Legend: R = Read only; -n = value after reset; Table 3-6 Bit LRESETNMI PIN Status Register (LRSTNMIPINSTAT) Field Descriptions Field 31-20 Description Reserved Reserved 19 NMI3 CorePac 3 in NMI 18 NMI2 CorePac 2 in NMI 17 NMI1 CorePac 1 in NMI 16 NMI0 CorePac 0 in NMI Reserved Reserved 3 LR3 CorePac 3 in Local Reset 2 LR2 CorePac 2 in Local Reset 1 LR1 CorePac 1 in Local Reset 0 LR0 CorePac 0 in Local Reset 15-4 End of Table 3-6 66 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 3.3.6 LRESETNMI PIN Status Clear (LRSTNMIPINSTAT_CLR) Register The LRSTNMIPINSTAT_CLR Register is used to clear the status of LRESET and NMI based on CORESEL. The LRESETNMI PIN Status Clear Register is shown in Figure 3-5 and described in Table 3-7. Figure 3-5 LRESETNMI PIN Status Clear Register (LRSTNMIPINSTAT_CLR) 31 20 19 18 17 16 Reserved NMI3 NMI2 NMI1 NMI0 R, +0000 0000 WC,+0 WC,+0 WC,+0 WC,+0 15 4 3 2 1 0 Reserved LR3 LR2 LR1 LR0 R, +0000 0000 WC,+0 WC,+0 WC,+0 WC,+0 Table 3-7 LRESETNMI PIN Status Clear Register (LRSTNMIPINSTAT_CLR) Field Descriptions Bit 31-20 Field Description Reserved Reserved 19 NMI3 CorePac 3 in NMI Clear 18 NMI2 CorePac 2 in NMI Clear 17 NMI1 CorePac 1 in NMI Clear 16 NMI0 CorePac 0 in NMI Clear 15-4 Reserved Reserved 3 LR3 CorePac 3 in Local Reset Clear 2 LR2 CorePac 2 in Local Reset Clear 1 LR1 CorePac 1 in Local Reset Clear 0 LR0 CorePac 0 in Local Reset Clear End of Table 3-7 3.3.7 Reset Status (RESET_STAT) Register The reset status register (RESET_STAT) captures the status of Local reset (LRx) for each of the cores and also the global device reset (GR). Software can use this information to take different device initialization steps, if desired. • In case of Local reset: The LRx bits are written as 1 and GR bit is written as 0 only when the CorePac receives an local reset without receiving a global reset. • In case of Global reset: The LRx bits are written as 0 and GR bit is written as 1 only when a global reset is asserted. The Reset Status Register is shown in Figure 3-6 and described in Table 3-8. Figure 3-6 31 Reset Status Register (RESET_STAT) 30 4 3 2 1 0 GR Reserved LR3 LR2 LR1 LR0 R, +1 R, + 000 0000 0000 0000 0000 0000 R,+0 R,+0 R,+0 R,+0 Legend: R = Read only; -n = value after reset Copyright 2010 Texas Instruments Incorporated Device Configuration 67 ADVANCE INFORMATION Legend: R = Read only; -n = value after reset; WC = Write 1 to Clear TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-8 Reset Status Register (RESET_STAT) Field Descriptions Bit Field 31 www.ti.com Description GR Global reset status 0 = Device has not received a global reset. 1 = Device received a global reset. Reserved Reserved 3 LR3 CorePac 3 reset status 0 = CorePac 3 has not received a local reset. 1 = CorePac 3 received a local reset. 2 LR2 CorePac 2 reset status 0 = CorePac 2 has not received a local reset. 1 = CorePac 2 received a local reset. 1 LR1 CorePac 1 reset status 0 = CorePac 1 has not received a local reset. 1 = CorePac 1 received a local reset. 0 LR0 CorePac 0 reset status 0 = CorePac 0 has not received a local reset. 1 = CorePac 0 received a local reset. 30-4 ADVANCE INFORMATION End of Table 3-8 3.3.8 Reset Status Clear (RESET_STAT_CLR) Register The RESET_STAT bits can be cleared by writing 1 to the corresponding bit in the RESET_STAT_CLR register. The Reset Status Clear Register is shown in Figure 3-7 and described in Table 3-9. Figure 3-7 31 Reset Status Clear Register (RESET_STAT_CLR) 30 4 3 2 1 0 GR Reserved LR3 LR2 LR1 LR0 RW, +0 R, + 000 0000 0000 0000 0000 0000 RW,+0 RW,+0 RW,+0 RW,+0 Legend: R = Read only; RW = Read/Write; -n = value after reset Table 3-9 Bit 31 30-4 Reset Status Clear Register (RESET_STAT_CLR) Field Descriptions Field Description GR Global Reset Clear bit 0 = Writing a 0 has no effect. 1 = Writing a 1 to the GR bit clears the corresponding bit in the RESET_STAT register. Reserved Reserved 3 LR3 CorePac 3 reset Clear bit 0 = Writing a 0 has no effect. 1 = Writing a 1 to the LR3 bit clears the corresponding bit in the RESET_STAT register. 2 LR2 CorePac 2 reset Clear bit 0 = Writing a 0 has no effect. 1 = Writing a 1 to the LR2 bit clears the corresponding bit in the RESET_STAT register. 1 LR1 CorePac 1 reset Clear bit 0 = Writing a 0 has no effect. 1 = Writing a 1 to the LR1 bit clears the corresponding bit in the RESET_STAT register. 0 LR0 CorePac 0 reset Clear bit 0 = Writing a 0 has no effect. 1 = Writing a 1 to the LR0 bit clears the corresponding bit in the RESET_STAT register. End of Table 3-9 68 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 3.3.9 Boot Complete (BOOTCOMPLETE) Register The BOOTCOMPLETE register controls the BOOTCOMPLETE pin status. The purpose is to indicate the completion of the ROM booting process. The Boot Complete Register is shown in Figure 3-8 and described in Table 3-10. Figure 3-8 Boot Complete Register (BOOTCOMPLETE) 31 4 3 2 1 0 Reserved BC3 BC2 BC1 BC0 R, + 0000 0000 0000 0000 0000 0000 RW,+0 RW,+0 RW,+0 RW,+0 Table 3-10 Bit Boot Complete Register (BOOTCOMPLETE) Field Descriptions Field Description Reserved Reserved 3 BC3 CorePac 3 boot status 0 = CorePac 3 boot NOT complete 1 = CorePac 3 boot complete 2 BC2 CorePac 2 boot status 0 = CorePac 2 boot NOT complete 1 = CorePac 2 boot complete 1 BC1 CorePac 1 boot status 0 = CorePac 1 boot NOT complete 1 = CorePac 1 boot complete 0 BC0 CorePac 0 boot status 0 = CorePac 0 boot NOT complete 1 = CorePac 0 boot complete 31-4 ADVANCE INFORMATION Legend: R = Read only; RW = Read/Write; -n = value after reset End of Table 3-10 The BCx bit indicates the boot complete status of the corresponding core. All BCx bits will be sticky bits — that is they can be set only once by the software after device reset and they will be cleared to 0 on all device resets. Boot ROM code will be implemented such that each core will set its corresponding BCx bit immediately before branching to the predefined location in memory. 3.3.10 Power State Control (PWRSTATECTL) Register The PWRSTATECTL register is controlled by the software to indicate the power-saving mode. ROM code reads this register to differentiate between the various power saving modes. This register is cleared only by POR and will survive all other device resets. See the Hardware Design Guide for KeyStone Devices in ‘‘Related Documentation from Texas Instruments’’ on page 59 for more information. The Power State Control Register is shown in Figure 3-9 and described in Table 3-11. Figure 3-9 Power State Control Register (PWRSTATECTL) 31 3 2 1 0 GENERAL_PURPOSE HIBERNATION_MODE HIBERNATION STANDBY RW, +0000 0000 0000 0000 0000 0000 0000 0 RW,+0 RW,+0 RW,+0 Legend: RW = Read/Write; -n = value after reset Copyright 2010 Texas Instruments Incorporated Device Configuration 69 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-11 Bit www.ti.com Power State Control Register (PWRSTATECTL) Field Descriptions Field Description GENERAL_PURPOSE Used to provide a start address for execution out of the hibernation modes. See the Bootloader for the C66x DSP User Guide in ‘‘Related Documentation from Texas Instruments’’ on page 59. 2 HIBERNATION_MODE Indicates whether the device is in hibernation mode 1 or mode 2. 0 = Hibernation mode 1 1 = Hibernation mode 2 1 HIBERNATION Indicates whether the device is in hibernation mode or not. 0 = Not in hibernation mode 1 = Hibernation mode 0 STANDBY Indicates whether the device is in standby mode or not. 0 = Not in standby mode 1 = Standby mode 31-3 ADVANCE INFORMATION End of Table 3-11 3.3.11 NMI Even Generation to CorePac (NMIGRx) Register NMIGRx registers are used for generating NMI events to the corresponding CorePac. The C6674 has four NMIGRx registers (NMIGR0 through NMIGR3). The NMIGR0 register generates an NMI event to CorePac0, the NMIGR1 register generates an NMI event to CorePac1, and so on. Writing a 1 to the NMIG field generates a NMI pulse. Writing a 0 has no effect and Reads return 0 and have no other effect. The NMI Even Generation to CorePac Register is shown in Figure 3-10 and described in Table 3-12. Figure 3-10 NMI Generation Register (NMIGRx) 31 1 0 GENERAL_PURPOSE NMIG R, +0000 0000 0000 0000 0000 0000 0000 000 RW,+0 Legend: RW = Read/Write; -n = value after reset Table 3-12 Bit Field 31-1 0 NMI Generation Register (NMIGRx) Field Descriptions Description Reserved Reserved NMIG Reads return 0 Writes: 0 = No effect 1 = Creates NMI pulse to the corresponding CorePac — CorePac0 for NMIGR0, etc. End of Table 3-12 3.3.12 IPC Generation (IPCGRx) Registers IPCGRx are the IPC interrupt generation registers to facilitate inter CorePac interrupts. The C6674 has four IPCGRx registers (IPCGR0 through IPCGR3) registers. This can be used by external hosts or CorePacs to generate interrupts to other CorePacs. A write of 1 to IPCG field of IPCGRx register will generate an interrupt pulse to CorePacx (0 <= x <= 3). 70 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com These registers also provide a Source ID facility by which up to 28 different sources of interrupts can be identified. Allocation of source bits to source processor and meaning is entirely based on software convention. The register field descriptions are given in the following tables. Virtually anything can be a source for these registers as this is completely controlled by software. Any master that has access to BOOTCFG module space can write to these registers. The IPC Generation Register is shown in Figure 3-11 and described in Table 3-13. Figure 3-11 IPC Generation Registers (IPCGRx) 31 30 29 28 SRCS27 SRCS26 SRCS25 SRCS24 RW +0 RW +0 RW +0 RW +0 27 8 7 6 5 4 3 1 0 SRCS23 – SRCS4 SRCS3 SRCS2 RCS1 SRCS0 Reserved IPCG RW +0 (per bit field) RW +0 RW +0 RW +0 RW +0 R, +000 RW +0 Table 3-13 Bit 31-4 ADVANCE INFORMATION Legend: R = Read only; RW = Read/Write; -n = value after reset IPC Generation Registers (IPCGRx) Field Descriptions Field Description SRCSx Reads return current value of internal register bit. Writes: 0 = No effect 1 = Sets both SRCSx and the corresponding SRCCx. 3-1 0 Reserved Reserved IPCG Reads return 0. Writes: 0 = No effect 1 = Creates an Inter-DSP interrupt. End of Table 3-13 3.3.13 IPC Acknowledgement (IPCARx) Registers IPCARx are the IPC interrupt-acknowledgement registers to facilitate inter-CorePac core interrupts. The C6674 has four IPCARx (IPCAR0 through IPCAR3) registers. These registers also provide a Source ID facility by which up to 28 different sources of interrupts can be identified. Allocation of source bits to source processor and meaning is entirely based on software convention. The register field descriptions are given in the following tables. Virtually anything can be a source for these registers as this is completely controlled by software. Any master that has access to BOOTCFG module space can write to these registers. The IPC Acknowledgement Register is shown in Figure 3-12 and described in Table 3-14. Figure 3-12 IPC Acknowledgement Registers (IPCARx) 31 30 29 28 SRCC27 SRCC26 SRCC25 SRCC24 RW +0 RW +0 RW +0 RW +0 27 8 7 6 5 4 3 0 SRCC23 – SRCC4 SRCC3 SRCC2 RCC1 SRCC0 Reserved RW +0 (per bit field) RW +0 RW +0 RW +0 RW +0 R, +0000 Legend: R = Read only; RW = Read/Write; -n = value after reset Copyright 2010 Texas Instruments Incorporated Device Configuration 71 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-14 Bit 31-4 www.ti.com IPC Acknowledgement Registers (IPCARx) Field Descriptions Field Description SRCCx Reads return current value of internal register bit. Writes: 0 = No effect 1 = Clears both SRCCx and the corresponding SRCSx 3-0 Reserved Reserved End of Table 3-14 ADVANCE INFORMATION 3.3.14 IPC Generation Host (IPCGRH) Register IPCGRH register is provided to facilitate host DSP interrupt. Operation and use of IPCGRH is the same as other IPCGR registers. Interrupt output pulse created by IPCGRH is driven on a device pin, host interrupt/event output (HOUT). The host interrupt output pulse should be stretched. It should be asserted for 4 bootcfg clock cycles (DSP/6) followed by a deassertion of 4 bootcfg clock cycles. Generating the pulse will result in 8 DSP/6 cycle pulse blocking window. Write to IPCGRH with IPCG bit (bit 0) set will only generate a pulse if they are beyond 8 DSP/6 cycle period. The IPC Generation Host Register is shown in Figure 3-13 and described in Table 3-15. Figure 3-13 IPC Generation Registers (IPCGRH) 31 30 29 28 SRCS27 SRCS26 SRCS25 SRCS24 RW +0 RW +0 RW +0 RW +0 27 8 7 6 5 4 3 1 0 SRCS23 – SRCS4 SRCS3 SRCS2 RCS1 SRCS0 Reserved IPCG RW +0 (per bit field) RW +0 RW +0 RW +0 RW +0 R, +000 RW +0 Legend: R = Read only; RW = Read/Write; -n = value after reset Table 3-15 Bit IPC Generation Registers (IPCGRH) Field Descriptions Field 31-4 SRCSx Description Reads return current value of internal register bit. Writes: 0 = No effect 1 = Sets both SRCSx and the corresponding SRCCx. 3-1 0 Reserved Reserved IPCG Reads return 0. Writes: 0 = No effect 1 = Creates an interrupt pulse on device pin (host interrupt/event output in HOUT pin) End of Table 3-15 72 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 3.3.15 IPC Acknowledgement Host (IPCARH) Register IPCARH registers are provided to facilitate host DSP interrupt. Operation and use of IPCARH is the same as other IPCAR registers. The IPC Acknowledgement Host Register is shown in Figure 3-14 and described in Table 3-16. Figure 3-14 IPC Acknowledgement Register (IPCARH) 31 30 29 28 SRCC27 SRCC26 SRCC25 SRCC24 RW +0 RW +0 RW +0 RW +0 27 8 7 6 5 4 3 0 SRCC23 – SRCC4 SRCC3 SRCC2 RCC1 SRCC0 Reserved RW +0 (per bit field) RW +0 RW +0 RW +0 RW +0 R, +0000 Table 3-16 Bit IPC Acknowledgement Register (IPCARH) Field Descriptions Field 31-4 Description SRCCx Reads return current value of internal register bit. Writes: 0 = No effect 1 = Clears both SRCCx and the corresponding SRCSx 3-0 Reserved Reserved End of Table 3-16 3.3.16 Timer Input Selection Register (TINPSEL) Timer input selection is handled within the control register TINPSEL. The Timer Input Selection Register is shown in Figure 3-15 and described in Table 3-17. Figure 3-15 Timer Input Selection Register (TINPSEL) 31 16 Reserved 15 14 13 12 11 10 TINPHSEL7 TINPLSEL7 TINPHSEL6 TINPLSEL6 TINPHSEL5 TINPLSEL5 RW, +1 RW, +0 RW, +1 RW, +0 RW, +1 RW, +0 10 9 8 7 6 5 4 3 2 1 0 TINPLSEL5 TINPHSEL4 TINPLSEL4 TINPHSEL3 TINPLSEL3 TINPHSEL2 TINPLSEL2 TINPHSEL1 TINPLSEL1 TINPHSEL0 TINPLSEL0 RW, +0 RW, +1 RW, +0 RW, +1 RW, +0 RW, +1 RW, +0 RW, +1 RW, +1 RW, +1 RW, +0 R = Read only; RW = Read/Write; -n = value after reset Table 3-17 Bit Timer Input Selection Field Description (TINPSEL) (Part 1 of 2) Field 31-16 Reserved Description Reserved 15 TINPHSEL7 Input select for TIMER7 high. 0 = TIMI0 1 = TIMI1 14 TINPLSEL7 Input select for TIMER7 low. 0 = TIMI0 1 = TIMI1 13 TINPHSEL6 Input select for TIMER6 high. 0 = TIMI0 1 = TIMI1 Copyright 2010 Texas Instruments Incorporated Device Configuration 73 ADVANCE INFORMATION Legend: R = Read only; RW = Read/Write; -n = value after reset TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-17 Bit www.ti.com Timer Input Selection Field Description (TINPSEL) (Part 2 of 2) ADVANCE INFORMATION Field Description 12 TINPLSEL6 Input select for TIMER6 low. 0 = TIMI0 1 = TIMI1 11 TINPHSEL5 Input select for TIMER5 high. 0 = TIMI0 1 = TIMI1 10 TINPLSEL5 Input select for TIMER5 low. 0 = TIMI0 1 = TIMI1 9 TINPHSEL4 Input select for TIMER4 high. 0 = TIMI0 1 = TIMI1 8 TINPLSEL4 Input select for TIMER4 low. 0 = TIMI0 1 = TIMI1 7 TINPHSEL3 Input select for TIMER3 high. 0 = TIMI0 1 = TIMI1 6 TINPLSEL3 Input select for TIMER3 low. 0 = TIMI0 1 = TIMI1 5 TINPHSEL2 Input select for TIMER2 high. 0 = TIMI0 1 = TIMI1 4 TINPLSEL2 Input select for TIMER2 low. 0 = TIMI0 1 = TIMI1 3 TINPHSEL1 Input select for TIMER1 high. 0 = TIMI0 1 = TIMI1 2 TINPLSEL1 Input select for TIMER1 low. 0 = TIMI0 1 = TIMI1 1 TINPHSEL0 Input select for TIMER0 high. 0 = TIMI0 1 = TIMI1 0 TINPLSEL0 Input select for TIMER0 low. 0 = TIMI0 1 = TIMI1 End of Table 3-17 74 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 3.3.17 Timer Output Selection Register (TOUTPSEL) The timer output selection is handled within the control register TOUTSEL. The Timer Output Selection Register is shown in Figure 3-16 and described in Table 3-18. Figure 3-16 Timer Output Selection Register (TOUTPSEL) 31 10 9 5 4 0 Reserved TOUTPSEL1 TOUTPSEL0 R,+000000000000000000000000 RW,+00001 RW,+00000 Table 3-18 ADVANCE INFORMATION Legend: R = Read only; RW = Read/Write; -n = value after reset Timer Output Selection Field Description (TOUTPSEL) Bit Field Description 31-9 Reserved Reserved 9-5 TOUTPSEL1 Output select for TIMO1 00000: TOUTL0 00001: TOUTH0 00010: TOUTL1 00011: TOUTH1 00100: TOUTL2 00101: TOUTH2 00110: TOUTL3 00111: TOUTH3 4 Reserved Reserved 4-0 TOUTPSEL0 Output select for TIMO0 00000: TOUTL0 00001: TOUTH0 00010: TOUTL1 00011: TOUTH1 00100: TOUTL2 00101: TOUTH2 00110: TOUTL3 00111: TOUTH3 01000: TOUTL4 01001: TOUTH4 01010: TOUTL5 01011: TOUTH5 01100: TOUTL6 01101: TOUTH6 01110: TOUTL7 01111: TOUTH7 10000 to 11111: Reserved 01000: TOUTL4 01001: TOUTH4 01010: TOUTL5 01011: TOUTH5 01100: TOUTL6 01101: TOUTH6 01110: TOUTL7 01111: TOUTH7 10000 to 11111: Reserved End of Table 3-18 3.3.18 Reset Mux (RSTMUXx) Register The software controls the Reset Mux block through the reset multiplex registers using RSTMUX0 through RSTMUX3 for each of the four CorePacs on the C6674. These registers are located in Bootcfg memory space. The Timer Output Selection Register is shown in Figure 3-17 and described in Table 3-19. Figure 3-17 Reset Mux Register RSTMUXx 31 10 9 8 7 5 4 3 1 0 Reserved EVTSTATCLR Reserved DELAY EVTSTAT OMODE LOCK R, +0000 0000 0000 0000 0000 00 RC, +0 R, +0 RW, +100 R, +0 RW, +000 RW, +0 Legend: R = Read only; RW = Read/Write; -n = value after reset; RC = Read only and write 1 to clear Copyright 2010 Texas Instruments Incorporated Device Configuration 75 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 3-19 Bit 31-10 Reset Mux Register Field Descriptions Field Description Reserved Reserved 9 EVTSTATCLR 8 Reserved 7-5 www.ti.com 0 = Writing O had no effect 1 = Writing 1 to this bit clears the EVTSTAT bit Reserved ADVANCE INFORMATION DELAY 000b = 256 DSP/6 cycles delay between NMI & Local reset, when OMODE = 100b 001b = 512 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b 010b = 1024 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b 011b = 2048 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b 100b = 4096 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b (Default) 101b = 8192 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b 110b = 16384 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b 111b = 32768 DSP/6 cycles delay between NMI & Local reset, when OMODE=100b 4 EVTSTAT 0 = No event received (Default) 1 = WD timer event received by Reset Mux block 3-1 OMODE 000b = WD Timer Event input to the Reset Mux block does not cause any output event (Default) 001b = Reserved 010b = WD Timer Event input to the Reset Mux block causes local reset input to CorePac 011b = WD Timer Event input to the Reset Mux block causes NMI input to CorePac 100b = WD Timer Event input to the Reset Mux block causes NMI input followed by Local reset input to CorePac. Delay between NMI and local reset is set in DELAY bit field. 101b = WD Timer Event input to the Reset Mux block causes Device Reset to C6674 110b = Reserved 111b = Reserved LOCK 0 = Register fields are not locked (Default) 1 = Register fields are locked until the next timer reset 0 End of Table 3-19 76 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor www.ti.com SPRS692—November 2010 3.4 Pullup/Pulldown Resistors Proper board design should ensure that input pins to the device always be at a valid logic level and not floating. This may be achieved via pullup/pulldown resistors. The device features internal pullup (IPU) and internal pulldown (IPD) resistors on most pins to eliminate the need, unless otherwise noted, for external pullup/pulldown resistors. For the device configuration pins (listed in Table 3-1), if they are both routed out and are not driven (in Hi-Z state), it is strongly recommended that an external pullup/pulldown resistor be implemented. Although, internal pullup/pulldown resistors exist on these pins and they may match the desired configuration value, providing external connectivity can help ensure that valid logic levels are latched on these device configuration pins. In addition, applying external pullup/pulldown resistors on the device configuration pins adds convenience to the user in debugging and flexibility in switching operating modes. Tips for choosing an external pullup/pulldown resistor: • Consider the total amount of current that may pass through the pullup or pulldown resistor. Make sure to include the leakage currents of all the devices connected to the net, as well as any internal pullup or pulldown resistors. • Decide a target value for the net. For a pulldown resistor, this should be below the lowest VIL level of all inputs connected to the net. For a pullup resistor, this should be above the highest VIH level of all inputs on the net. A reasonable choice would be to target the VOL or VOH levels for the logic family of the limiting device; which, by definition, have margin to the VIL and VIH levels. • Select a pullup/pulldown resistor with the largest possible value that can still ensure that the net will reach the target pulled value when maximum current from all devices on the net is flowing through the resistor. The current to be considered includes leakage current plus, any other internal and external pullup/pulldown resistors on the net. • For bidirectional nets, there is an additional consideration that sets a lower limit on the resistance value of the external resistor. Verify that the resistance is small enough that the weakest output buffer can drive the net to the opposite logic level (including margin). • Remember to include tolerances when selecting the resistor value. • For pullup resistors, also remember to include tolerances on the DVDD rail. For most systems: • A 1-kΩ resistor can be used to oppose the IPU/IPD while meeting the above criteria. Users should confirm this resistor value is correct for their specific application. • A 20-kΩ resistor can be used to compliment the IPU/IPD on the device configuration pins while meeting the above criteria. Users should confirm this resistor value is correct for their specific application. For more detailed information on input current (II), and the low-level/high-level input voltages (VIL and VIH) for the TMS320C6674 device, see Section 6.3 ‘‘Electrical Characteristics’’ on page 93. To determine which pins on the device include internal pullup/pulldown resistors, see Table 2-15 ‘‘Terminal Functions — Signals and Control by Function’’ on page 33. Copyright 2010 Texas Instruments Incorporated Device Configuration 77 ADVANCE INFORMATION An external pullup/pulldown resistor needs to be used in the following situations: • Device Configuration Pins: If the pin is both routed out and are not driven (in Hi-Z state), an external pullup/pulldown resistor must be used, even if the IPU/IPD matches the desired value/state. • Other Input Pins: If the IPU/IPD does not match the desired value/state, use an external pullup/pulldown resistor to pull the signal to the opposite rail. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com ADVANCE INFORMATION 78 Device Configuration Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor www.ti.com SPRS692—November 2010 4 System Interconnect On the TMS320C6674 device, the C66x CorePac, the EDMA3 transfer controllers, and the system peripherals are interconnected through two switch fabrics. The switch fabrics allow for low-latency, concurrent data transfers between master peripherals and slave peripherals. The switch fabrics also allow for seamless arbitration between the system masters when accessing system slaves. Two types of buses exist in the device: data buses and configuration buses. Some peripherals have both a data bus and a configuration bus interface, while others only have one type of interface. Furthermore, the bus interface width and speed varies from peripheral to peripheral. Configuration buses are mainly used to access the register space of a peripheral and the data buses are used mainly for data transfers. However, in some cases, the configuration bus is also used to transfer data. Similarly, the data bus can also be used to access the register space of a peripheral. For example, the DDR3 memory controller registers are accessed through their data bus interface. The C66x CorePac, the EDMA3 traffic controllers, and the various system peripherals can be classified into two categories: masters and slaves. Masters are capable of initiating read and write transfers in the system and do not rely on the EDMA3 for their data transfers. Slaves on the other hand rely on the EDMA3 to perform transfers to and from them. Examples of masters 2 include the EDMA3 traffic controllers, SRIO, and EMAC. Examples of slaves include the SPI, UART, and I C. The device contains two switch fabrics (the TeraNet) through which masters and slaves communicate. The data switch fabric, known as the data switched central resource (SCR), is a high-throughput interconnect mainly used to move data across the system (for more information, see Section 4.2 ‘‘Data Switch Fabric Connections’’). The data SCR is further divided into two smaller SCRs. One connects very high speed masters to slaves via 256-bit data buses running at a DSP/2 frequency. The other connects masters to slaves via 128-bit data buses running at a DSP/3 frequency. Peripherals that match the native bus width of the SCR it is connected to can connect directly to the data SCR; other peripherals require a bridge. The configuration switch fabric, also known as the configuration switch central resource (SCR), is mainly used to access peripheral registers (for more information, see Section 4.3 ‘‘Configuration Switch Fabric’’). The configuration SCR connects the C66x CorePac and masters on the data switch fabric to slaves via 32-bit configuration buses running at a DSP/3 frequency. As with the data SCR, some peripherals require the use of a bridge to interface to the configuration SCR. Bridges perform a variety of functions: • Conversion between configuration bus and data bus. • Width conversion between peripheral bus width and SCR bus width. • Frequency conversion between peripheral bus frequency and SCR bus frequency. Copyright 2010 Texas Instruments Incorporated System Interconnect 79 ADVANCE INFORMATION 4.1 Internal Buses, Bridges, and Switch Fabrics TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 4.2 Data Switch Fabric Connections A detailed figure will be added here for a future release. Connection information is shown in the tables below. Table 4-1 DSP/2 Data SCR Connection Matrix Slave To DSP/3 Data SCR Masters HyperLink_Slave MSMC_SMS MSMC_SES Br_1 Br_2 Br_3 Br_4 Y Y Y N Y N N TPCC0 TC0_RD TPCC0 TC0_WR Y Y Y N Y N N TPCC0 TC1_RD Y Y Y N N Y N Y Y Y N N Y N HyperLink_Master N Y Y Y N N N MSMC_master Y N N N N N Y From DSP/3 Data SCR Br_5 Y Y Y N N N N From DSP/3 Data SCR Br_6 Y Y Y N N N N From DSP/3 Data SCR Br_7 Y Y Y N N N N From DSP/3 Data SCR Br_8 Y Y Y N N N N From DSP/3 Data SCR Br_9 Y Y Y N N N N From DSP/3 Data SCR Br_10 Y Y Y N N N N End of Table 4-1 Table 4-2 DSP/3 Data SCR Connection Matrix (Part 1 of 2) Br_14 (to Config SCR) Br_13 (to Config SCR) Br_12 (to Config SCR) Br_10 (to DSP/2 Data SCR) Br_9 (to DSP/2 Data SCR) Br_8 (to DSP/2 Data SCR) Br_7 (to DSP/2 Data SCR) Br_6 (to DSP/2 Data SCR) Br_5 (to DSP/2 Data SCR) EMIF16 HyperLink Slave QM Slave PCIe Slave SPI Boot ROM SRIO_Data_Slave CorePac3_SDMA CorePac2_SDMA Masters CorePac1_SDMA Slaves CorePac0_SDMA ADVANCE INFORMATION TPCC0 TC1_WR HyperLink Data Y Y Y Y Y Y Y Y Y N Y N N N N N N Y N N TPCC0_TC0_RD Y Y Y Y Y Y Y Y N Y Y N N N N N N Y N N TPCC0_TC0_WR Y Y Y Y Y N Y Y N Y Y N N N N N N Y N N TPCC0_TC1_RD Y Y Y Y Y Y Y Y N Y Y N N N N N N Y N N TPCC0_TC1_WR Y Y Y Y Y N Y Y N Y Y N N N N N N Y N N TPCC1_TC0_RD Y Y Y Y Y Y Y Y N Y Y Y N N N N N Y N N TPCC1_TC0_WR Y Y Y Y Y N Y Y N Y Y Y N N N N N Y N N TPCC1_TC1_RD Y Y Y Y Y Y Y Y Y Y Y N Y N N N N N Y N TPCC1_TC1_WR Y Y Y Y Y N Y Y Y Y Y N Y N N N N N Y N TPCC1_TC2_RD Y Y Y Y Y Y Y Y N Y Y N N Y N N N N N Y TPCC1_TC2_WR Y Y Y Y Y N Y Y N Y Y N N Y N N N N N Y TPCC1_TC3_RD Y Y Y Y Y Y Y Y N Y Y N N N Y N N Y N N TPCC1_TC3_WR Y Y Y Y Y N Y Y N Y Y N N N Y N N Y N N TPCC2_TC0_RD Y Y Y Y Y Y Y Y N Y Y N N N N Y N Y N N TPCC2_TC0_WR Y Y Y Y Y N Y Y N Y Y N N N N Y N Y N N TPCC2_TC1_RD Y Y Y Y Y Y Y Y Y Y Y N N N N N Y N Y N 80 System Interconnect Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 4-2 DSP/3 Data SCR Connection Matrix (Part 2 of 2) TPCC2_TC1_WR Y Y Y Y Y N Y Y Y Y Y N N N N N Y N Y N TPCC2_TC2_RD Y Y Y Y Y Y Y Y N Y Y Y N N N N N Y N N TPCC2_TC2_WR Y Y Y Y Y N Y Y N Y Y Y N N N N N Y N N TPCC2_TC3_RD Y Y Y Y Y Y Y Y N Y Y N Y N N N N N N Y TPCC2_TC3_WR Y Y Y Y Y N Y Y N Y Y N Y N N N N N N Y SRIO Messaging Y Y Y Y N N N N Y N Y N N N N Y N N N N SRIO Data Master Y Y Y Y N N Y N Y Y Y N N N N Y N Y N N PCIe Master Y Y Y Y N N Y N Y Y Y N N Y N N N Y N N Packet Accelerator Data Y Y Y Y N N N N Y N N N N N N N Y N N N MSMC Data (Br_4) Y Y Y Y Y Y Y Y Y Y Y N N N N N N Y N N Queue Manager Y Y Y Y N N N N Y Y N N N N Y N N N N N TSIP 0 Y Y Y Y N N N N N N N Y N N N N N N N N TSIP 1 Y Y Y Y N N N N N N N Y N N N N N N N N ADVANCE INFORMATION Br_14 (to Config SCR) Br_13 (to Config SCR) Br_12 (to Config SCR) Br_10 (to DSP/2 Data SCR) Br_9 (to DSP/2 Data SCR) Br_8 (to DSP/2 Data SCR) Br_7 (to DSP/2 Data SCR) Br_6 (to DSP/2 Data SCR) Br_5 (to DSP/2 Data SCR) EMIF16 HyperLink Slave QM Slave PCIe Slave SPI Boot ROM SRIO_Data_Slave CorePac3_SDMA CorePac2_SDMA Masters CorePac1_SDMA CorePac0_SDMA Slaves End of Table 4-2 Copyright 2010 Texas Instruments Incorporated System Interconnect 81 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 4.3 Configuration Switch Fabric A detailed figure will be added here for a future release. All masters can talk to all slaves on the configuration switch fabric. 4.4 Bus Priorities The priority level of all master peripheral traffic is defined at the TeraNet boundary. User programmable priority registers will be present to allow software configuration of the data traffic through the TeraNet. Note that a lower number means higher priority - PRI = 000b = urgent, PRI = 111b = low. ADVANCE INFORMATION All other masters provide their priority directly and do not need a default priority setting. Examples include the CorePacs, whose priorities are set through software in the UMC control registers. All the Packet DMA based peripherals also have internal registers to define the priority level of their initiated transactions. The Packet DMA secondary port is one master port that does not have priority allocation register inside the IP. The priority level for transaction from this master port is described by PKTDMA_PRI_ALLOC register in Figure 4-1 and Table 4-3. Figure 4-1 Packed DMA Priority Allocation Register (PKTDMA_PRI_ALLOC) 31 16 15 10 9 8 7 4 3 2 0 Reserved PKTDMA_PRI R/W-00000000000000000000001000011 RW-000 Legend: R = Read only; R/W = Read/Write; -n = value after reset Table 4-3 Bit Packed DMA Priority Allocation Register (PKTDMA_PRI_ALLOC) Field Descriptions Acronym Description 31-10 Reserved Reserved. 2-0 PKDTDMA_PRI Control the priority level for the transactions from Packet DMA Master port, which access the external linking RAM. End of Table 4-3 For all other modules, see the respective User Guides in “Related Documentation from Texas Instruments” on page 59 for programmable priority registers. 82 System Interconnect Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com The C66x CorePac consists of several components: • The C66x DSP and associated C66x CorePac core • Level-one and level-two memories (L1P, L1D, L2) • Data Trace Formatter (DTF) • Embedded Trace Buffer (ETB) • Interrupt controller • Power-down controller • External memory controller • Extended memory controller • A dedicated power/sleep controller (LPSC) The C66x CorePac also provides support for memory protection, bandwidth management (for resources local to the C66x CorePac) and address extension. Figure 5-1 shows a block diagram of the C66x CorePac. Figure 5-1 C66x CorePac Block Diagram Interrupt and Exception Controller Instruction Fetch 16-/32-bit Instruction Dispatch Control Registers In-Circuit Emulation Boot Controller Instruction Decode Data Path B Data Path A PLLC LPSC A Register File B Register File A31-A16 A15-A0 B31-B16 B15-B0 .M1 xx xx .M2 xx xx GPSC .L1 .S1 .D1 .D2 .S2 Data Memory Controller (DMC) With Memory Protect/Bandwidth Mgmt .L2 Extended Memory Controller (XMC) C66x DSP Core L2 Cache/ SRAM 512KB MSM SRAM 4096KB DDR3 SRAM DMA Switch Fabric External Memory Controller (EMC) Program Memory Controller (PMC) With Memory Protect/Bandwidth Mgmt Unified Memory Controller (UMC) 32KB L1P CFG Switch Fabric 32KB L1D For more detailed information on the TMS320C66x CorePac on the C6674 device, see the C66x CorePac User Guide (literature number SPRUGW0). Copyright 2010 Texas Instruments Incorporated C66x CorePac 83 ADVANCE INFORMATION 5 C66x CorePac TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 5.1 Memory Architecture Each C66x CorePac of the TMS320C6674 device contains a 512KB level-2 memory (L2), a 32KB level-1 program memory (L1P), and a 32KB level-1 data memory (L1D). The device also contain a 4096KB multicore shared memory (MSM). All memory on the C6674 has a unique location in the memory map (see Table 2-2 ‘‘Memory Map Summary for TMS320C6674’’ on page 19. The L1P and L1D cache can be reconfigured via software through the L1PMODE field of the L1P Configuration Register (L1PCFG) and the L1DMODE field of the L1D Configuration Register (L1DCFG) of the C66x CorePac. L1D is a two-way set-associative cache, while L1P is a direct-mapped cache. ADVANCE INFORMATION The on-chip bootloader changes the reset configuration for L1P and L1D. For more information, see the Bootloader for the C66x DSP User Guide (literature number SPRUGY5). For more information on the operation L1 and L2 caches, see the C66x DSP Cache User Guide (literature number SPRUGY8). 5.1.1 L1P Memory The L1P memory configuration for the C6674 device is as follows: • Region 0 size is 0K bytes (disabled) • Region 1 size is 32K bytes with no wait states Figure 5-2 shows the available SRAM/cache configurations for L1P. Figure 5-2 TMS320C6674 L1P Memory Configurations L1P mode bits 000 001 010 011 100 1/2 SRAM All SRAM 7/8 SRAM L1P memory Block base address 00E0 0000h 16K bytes 3/4 SRAM direct mapped cache 00E0 4000h 8K bytes dm cache 84 C66x CorePac direct mapped cache direct mapped cache 00E0 6000h 4K bytes 00E0 7000h 4K bytes 00E0 8000h Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 5.1.2 L1D Memory The L1D memory configuration for the C6674 device is as follows: • Region 0 size is 0K bytes (disabled) • Region 1 size is 32K bytes with no wait states Figure 5-3 shows the available SRAM/cache configurations for L1D. Figure 5-3 TMS320C6674 L1D Memory Configurations L1D mode bits 001 010 011 100 1/2 SRAM All SRAM 7/8 SRAM L1D memory Block base address 00F0 0000h ADVANCE INFORMATION 000 16K bytes 3/4 SRAM 2-way cache 00F0 4000h 8K bytes 2-way cache 00F0 6000h 4K bytes 2-way cache 2-way cache 00F0 7000h 4K bytes 00F0 8000h 5.1.3 L2 Memory The L2 memory configuration for the C6674 device is as follows: • Total memory size is 4096KB • Each core contains 512KB of memory • Local starting address for each core is 0080 0000h Copyright 2010 Texas Instruments Incorporated C66x CorePac 85 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com L2 memory can be configured as all SRAM, all 4-way set-associative cache, or a mix of the two. The amount of L2 memory that is configured as cache is controlled through the L2MODE field of the L2 Configuration Register (L2CFG) of the C66x CorePac. Figure 5-4 shows the available SRAM/cache configurations for L2. By default, L2 is configured as all SRAM after device reset. Figure 5-4 TMS320C6674 L2 Memory Configurations L2 Mode Bits ADVANCE INFORMATION 000 001 010 011 ALL SRAM 15/16 SRAM 7/8 SRAM 3/4 SRAM 100 1/2 SRAM 101 ALL Cache L2 Memory Block Base Address 0080 0000h 256Kbytes 4-Way Cache 0084 0000h 128Kbytes 4-Way Cache 4-Way Cache 4-Way Cache 4-Way Cache 0086 0000h 64Kbytes 32Kbytes 32Kbytes 0087 0000h 0087 8000h 0087 FFFFh Global addresses are accessible to all masters in the system. In addition, local memory can be accessed directly by the associated processor through aliased addresses, where the eight MSBs are masked to zero. The aliasing is handled within the C66x CorePac and allows for common code to be run unmodified on multiple cores. For example, address location 0x10800000 is the global base address for C66x CorePac Core 0's L2 memory. C66x CorePac Core 0 can access this location by either using 0x10800000 or 0x00800000. Any other master on the device must use 0x10800000 only. Conversely, 0x00800000 can by used by any of the cores as their own L2 base addresses. For C66x CorePac Core 0, as mentioned, this is equivalent to 0x10800000, for C66x CorePac Core 1 this is equivalent to 0x11800000, and for C66x CorePac Core 2 this is equivalent to 0x12800000. Local addresses should be used only for shared code or data, allowing a single image to be included in memory. Any code/data targeted to a specific core, or a memory region allocated during run-time by a particular core should always use the global address only. 5.1.4 MSMC SRAM The MSMC SRAM configuration for the C6674 device is as follows: • Memory size is 4096KB • The MSMC SRAM can be configured as shared L2 and/or shared L3 memory • Allows extension of external addresses from 2GB to up to 8GB • Has built in memory protection features 86 C66x CorePac Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com The MSM SRAM is always configured as all SRAM. When configured as a shared L2, its contents can be cached in L1P and L1D. When configured in shared L3 mode, it’s contents can be cached in L2 also. For more details on external memory address extension and memory protection features, see the Multicore Shared Memory Controller (MSMC) for KeyStone Devices User Guide (literature number SPRUGW7). 5.1.5 L3 Memory The L3 ROM on the device is 128KB. The ROM contains software used to boot the device. There is no requirement to block accesses from this portion to the ROM. Memory protection allows an operating system to define who or what is authorized to access L1D, L1P, and L2 memory. To accomplish this, the L1D, L1P, and L2 memories are divided into pages. There are 16 pages of L1P (2KB each), 16 pages of L1D (2KB each), and 32 pages of L2 (16KB each). The L1D, L1P, and L2 memory controllers in the C66x CorePac are equipped with a set of registers that specify the permissions for each memory page. Each page may be assigned with fully orthogonal user and supervisor read, write, and execute permissions. In addition, a page may be marked as either (or both) locally accessible or globally accessible. A local access is a direct DSP access to L1D, L1P, and L2, while a global access is initiated by a DMA (either IDMA or the EDMA3) or by other system masters. Note that EDMA or IDMA transfers programmed by the DSP count as global accesses. On a secure device, pages can be restricted to secure access only (default) or opened up for public, non-secure access. The DSP and each of the system masters on the device are all assigned a privilege ID. It is possible to specify whether memory pages are locally or globally accessible. The AIDx and LOCAL bits of the memory protection page attribute registers specify the memory page protection scheme, see Table 5-1. Table 5-1 Available Memory Page Protection Schemes AIDx Bit Local Bit 0 0 Description No access to memory page is permitted. 0 1 Only direct access by DSP is permitted. 1 0 Only accesses by system masters and IDMA are permitted (includes EDMA and IDMA accesses initiated by the DSP). 1 1 All accesses permitted. End of Table 5-1 Faults are handled by software in an interrupt (or an exception, programmable within the C66x CorePac interrupt controller) service routine. A DSP or DMA access to a page without the proper permissions will: • Block the access — reads return zero, writes are ignored • Capture the initiator in a status register — ID, address, and access type are stored • Signal event to DSP interrupt controller The software is responsible for taking corrective action to respond to the event and resetting the error status in the memory controller. For more information on memory protection for L1D, L1P, and L2, see the C66x CorePac User Guide (literature number SPRUGW0). Copyright 2010 Texas Instruments Incorporated C66x CorePac 87 ADVANCE INFORMATION 5.2 Memory Protection TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 5.3 Bandwidth Management When multiple requestors contend for a single C66x CorePac resource, the conflict is resolved by granting access to the highest priority requestor. The following four resources are managed by the Bandwidth Management control hardware: • Level 1 Program (L1P) SRAM/Cache • Level 1 Data (L1D) SRAM/Cache • Level 2 (L2) SRAM/Cache • Memory-mapped registers configuration bus ADVANCE INFORMATION The priority level for operations initiated within the C66x CorePac are declared through registers in the C66x CorePac. These operations are: • DSP-initiated transfers • User-programmed cache coherency operations • IDMA-initiated transfers The priority level for operations initiated outside the C66x CorePac by system peripherals is declared through the Priority Allocation Register (PRI_ALLOC) System peripherals with no fields in PRI_ALLOC have their own registers to program their priorities, see section 4.4 ‘‘Bus Priorities’’ on page 82 for more details. More information on the bandwidth management features of the C66x CorePac can be found in the C66x CorePac User Guide (literature number SPRUGW0.) 5.4 Power-Down Control The C66x CorePac supports the ability to power-down various parts of the C66x CorePac. The power-down controller (PDC) of the C66x CorePac can be used to power down L1P, the cache control hardware, the DSP, and the entire C66x CorePac. These power-down features can be used to design systems for lower overall system power requirements. Note—The C6674 does not support power-down modes for the L2 memory at this time. More information on the power-down features of the C66x CorePac can be found in the TMS320C66x CorePac Reference Guide (literature number SPRUGW0). 5.5 C66x CorePac Resets Table 5-2 shows the reset types supported on the C6674 device and how they affect the resetting of the CorePac, either both globally or just locally. Table 5-2 C66x CorePac Reset (Global or Local) Reset Type Global C66x CorePac Reset Local C66x CorePac Reset Power-On Reset Y Y Warm Reset Y Y System Reset Y Y DSP Reset N Y End of Table 5-2 For more detailed information on the global and local C66x CorePac resets, see the C66x CorePac Reference Guide (literature number SPRUGW0). And for more detailed information on device resets, see section 7.7 ‘‘Reset Controller’’ . 88 C66x CorePac Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 5.6 C66x CorePac Revision The version and revision of the C66x CorePac can be read from the CorePac Revision ID Register (MM_REVID) located at address 0181 2000h. The MM_REVID register is shown in Table 5-3 and described in Table 5-4. The C66x CorePac revision is dependant on the silicon revision being used. Table 5-3 CorePac Revision ID Register (MM_REVID) Address - 0181 2000h 31 30 29 28 27 26 25 (1) Bit 22 21 20 19 18 17 16 6 5 4 3 2 1 0 R-h 15 14 13 12 11 10 9 8 7 REVISION Acronym Reset 23 VERSION Acronym Reset 24 ADVANCE INFORMATION Bit (1) R-n 1 R/W = Read/Write; R = Read only; -n = value after reset Table 5-4 CorePac Revision ID Register (MM_REVID) Field Descriptions Bit Acronym Value 31:16 VERSION - Version of the C66x CorePac implemented on the device. Description 15:0 REVISION - Revision of the C66x CorePac version implemented on the device. End of Table 5-4 5.7 C66x CorePac Register Descriptions See the C66x CorePac Reference Guide (literature number SPRUGW0) for register offsets and definitions. Copyright 2010 Texas Instruments Incorporated C66x CorePac 89 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com ADVANCE INFORMATION 90 C66x CorePac Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 6 Device Operating Conditions 6.1 Absolute Maximum Ratings Table 6-1 Absolute Maximum Ratings (1) Over Operating Case Temperature Range (Unless Otherwise Noted) -0.3 V to TBD V CVDD1 -0.3 V to TBD V DVDD15 -0.3 V to TBD V DVDD18 -0.3 V to TBD V VREFSSTL VDDT1, VDDT2, VDDT3 0.49 × DVDD15 to 0.51 × DVDD15 -0.3 V to TBD V VDDT4, VDDT5, VDDT6 VDDR1, VDDR2, VDDR3 -0.3 V to TBD V AVDDA1, AVDDA2, AVDDA3 -0.3 V to TBD V VSS Ground -0.3 V to TBD V DDR3 -0.3 V to TBD V 2 Input voltage (VI) range: Output voltage (VO) range: Operating case temperature range, TC: 0V LVCMOS (1.8V) IC -0.3 V to TBD V LVDS -0.3 V to TBD V LJCB -0.3 V to TBD V SERDES -0.3 V to TBD V LVCMOS (1.8V) -0.3 V to TBD V DDR3 -0.3 V to TBD V 2 IC -0.3 V to TBD V SERDES -0.3 V to TBD V Commercial Extended 0°C to 85°C -40°C to 100°C LVCMOS (1.8V) Overshoot/undershoot (3) DDR3 2 20% Overshoot/Undershoot for 20% of Signal Duty Cycle IC Storage temperature range, Tstg: -65°C to 150°C End of Table 6-1 1 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2 All voltage values are with respect to VSS. 3 Overshoot/Undershoot percentage relative to I/O operating values - for example the maximum overshoot value for 1.8-V LVCMOS signals is DVDD18 + 0.20 × DVDD18 and maximum undershoot value would be VSS - 0.20 × DVDD18 Copyright 2010 Texas Instruments Incorporated Device Operating Conditions 91 ADVANCE INFORMATION Supply voltage range (2): CVDD TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 6.2 Recommended Operating Conditions Recommended Operating Conditions (1) Table 6-2 (2) DSP at 1 GHz Min Nom 0.95 1 Max Unit 1.05 0.855 0.9 0.945 CVDD Core Supply CVDD1 SR Core Supply 0.95 1 1.05 V DVDD18 1.8-V supply I/O voltage 1.71 1.8 1.89 V DSP at 800 MHz V ADVANCE INFORMATION DVDD15 1.5-V supply I/O voltage 1.425 1.5 1.575 V VREFSSTL DDR3 reference voltage 0.49 × DVDD15 0.5 × DVDD15 0.51 × DVDD15 V SerDes regulator supply (3) 1.425 1.5 1.575 V VDDAx PLL analog supply 1.71 1.8 1.89 V VDDTx SerDes termination supply 0.95 1 1.05 V VSS Ground 0 0 0 V VDDRx LVCMOS (1.8 V) VIH High-level input voltage 2 IC DDR3 EMIF 0.65 × DVDD18 V 0.7 × DVDD18 V VREFSSTL + 0.1 V LVCMOS (1.8 V) VIL Low-level input voltage DDR3 EMIF -0.3 2 IC TC Operating case temperature Commercial Extended 0.35 × DVDD18 V VREFSSTL - 0.1 V 0.3 × DVDD18 V 0 85 °C -40 100 °C End of Table 6-2 1 All differential clock inputs comply with the LVDS Electrical Specification, IEEE 1596.3-1996 and all SERDES I/Os comply with the XAUI Electrical Specification, IEEE 802.3ae-2002. 2 All SERDES I/Os comply with the XAUI Electrical Specification, IEEE 802.3ae-2002. 3 Where x = 1, 2, 3, 4... to indicate all supplies of the same kind. 92 Device Operating Conditions Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 6.3 Electrical Characteristics Table 6-3 Electrical Characteristics Over Recommended Ranges of Supply Voltage and Operating Case Temperature (Unless Otherwise Noted) Parameter LVCMOS (1.8 V) VOH High-level output voltage Test Conditions (1) IO = IOH Min Typ Max Unit DVDD18 - 0.45 DVDD15 - 0.4 DDR3 V 2 (2) IC VOL Low-level output voltage IO = IOL DDR3 2 IC 0.4 IO = 3 mA, pulled up to 1.8 V No IPD/IPU LVCMOS (1.8 V) II (3) Input current [DC] 2 Low-level output current [DC] IOL Internal pullup Internal pulldown IC IOH High-level output current [DC] 0.45 0.1 × DVDD18 V < VI < 0.9 × DVDD18 V -5 (4) Off-state output current [DC] 5 50 100 170 -170 -100 -50 -10 10 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD IOZ LVCMOS (1.8 V) V 0.4 μA μA mA mA TBD -2 2 μA End of Table 6-3 1 2 3 For test conditions shown as MIN, MAX, or TYP, use the appropriate value specified in the recommended operating conditions table. I2C uses open collector IOs and does not have a VOH Minimum. II applies to input-only pins and bi-directional pins. For input-only pins, II indicates the input leakage current. For bi-directional pins, II includes input leakage current and off-state (Hi-Z) output leakage current. 4 IOZ applies to output-only pins, indicating off-state (Hi-Z) output leakage current. Copyright 2010 Texas Instruments Incorporated Device Operating Conditions 93 ADVANCE INFORMATION LVCMOS (1.8 V) TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com ADVANCE INFORMATION 94 Device Operating Conditions Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7 TMS320C6674 Peripheral Information and Electrical Specifications This chapter covers the various peripherals on the TMS320C6674 DSP. Peripheral-specific information, timing diagrams, electrical specifications, and register memory maps are described in this chapter. 7.1 Parameter Information The data manual provides timing at the device pin. For output analysis, the transmission line and associated parasitics (vias, multiple nodes, etc.) must also be taken into account. The transmission line delay varies depending on the trace length. An approximate range for output delays can vary from 176 ps to 2 ns depending on the end product design. For recommended transmission line lengths, see the appropriate application notes, user guides, and design guides. A transmission line delay of 2 ns was used for all output measurements, except the DDR3, which was evaluated using a 528-ps delay. 2 Figure 7-1 represents all device outputs, except differential or I C. Figure 7-1 Test Load Circuit for AC Timing Measurements Device DDR3 Output Test Load Transmission Line Zo = 50 W 4 pF Data Manual Timing Reference Point (Device Terminal) Device Output Test Load Excluding DDR3 Transmission Line Zo = 50 W 5 pF The load capacitance value stated is only for characterization and measurement of AC timing signals. This load capacitance value does not indicate the maximum load the device is capable of driving. 7.1.1 1.8-V Signal Transition Levels All input and output timing parameters are referenced to 0.9 V for both 0 and 1 logic levels. Figure 7-2 Input and Output Voltage Reference Levels for AC Timing Measurements Vref = 0.9 V Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 95 ADVANCE INFORMATION This section describes the conditions used to capture the electrical data seen in this chapter. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com All rise and fall transition timing parameters are reference to VIL MAX and VIH MIN for input clocks. Figure 7-3 Rise and Fall Transition Time Voltage Reference Levels Vref = VIH MIN (or VOH MIN) 7.1.2 Timing Parameters and Board Routing Analysis ADVANCE INFORMATION The timing parameter values specified in this data sheet do not include delays by board routings. As a good board design practice, such delays must always be taken into account. Timing values may be adjusted by increasing/decreasing such delays. TI recommends using the available I/O buffer information specification (IBIS) models to analyze the timing characteristics correctly. To properly use IBIS models to attain accurate timing analysis for a given system, see the Using IBIS Models for Timing Analysis application report (literature number TBD). If needed, external logic hardware such as buffers may be used to compensate any timing differences. For inputs, timing is most impacted by the round-trip propagation delay from the DSP to the external device and from the external device to the DSP. This round-trip delay tends to negatively impact the input setup time margin, but also tends to improve the input hold time margins (see Table 7-1 and Figure 7-4). Table 7-1 Board-Level Timing Example (see Figure 7-4) No. Description 1 Clock route delay 2 Minimum DSP hold time 3 Minimum DSP setup time 4 External device hold time requirement 5 External device setup time requirement 6 Control signal route delay 7 External device hold time 8 External device access time 9 DSP hold time requirement 10 DSP setup time requirement 11 Data route delay End of Table 7-1 96 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-4 shows a general transfer between the DSP and an external device. The figure also shows board route delays and how they are perceived by the DSP and the external device Figure 7-4 Board-Level Input/Output Timings AECLKOUT (Output from DSP) 1 AECLKOUT (Input to External Device) 2 3 Control Signals (Input to External Device) 6 5 4 ADVANCE INFORMATION Control Signals (A) (Output from DSP) 7 8 (B) Data Signals (Output from External Device) 10 (B) Data Signals (Input to DSP) 9 11 (A) Control signals include data for writes. (B) Data signals are generated during reads from an external device. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 97 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.2 Recommended Clock and Control Signal Transition Behavior All clocks and control signals must transition between VIH and VIL (or between VIL and VIH) in a monotonic manner. 7.3 Power Supplies The following sections describe the proper power-supply sequencing and timing needed to properly power on the C6674. The various power supply rails and their primary function is listed in Table 7-2 below. Table 7-2 ADVANCE INFORMATION Name Power Supply Rails on TMS320C6674 Primary Function Voltage Notes CVDD SmartReflex core supply voltage 0.9 - 1.1 V Includes core voltage for DDR3 module CVDD1 Core supply voltage for memory array 1.0 V Fixed supply at 1.0 V VDDT1 HyperLink SerDes termination supply 1.0 V Filtered version of CVDD1. Special considerations for noise. Filter is not needed if HyperLink is not in use. VDDT2 SGMII/SRIO/PCIE SerDes termination supply 1.0 V Filtered version of CVDD1. Special considerations for noise. Filter is not needed if SGMII/SRIO/PCIE is not in use. DVDD15 1.5-V DDR3 IO supply 1.5 V VDDR1 HyperLink SerDes regulator supply 1.5 V Filtered version of DVDD15. Special considerations for noise. Filter is not needed if HyperLink is not in use. VDDR2 PCIE SerDes regulator supply 1.5 V Filtered version of DVDD15. Special considerations for noise. Filter is not needed if PCIE is not in use. VDDR3 SGMII SerDes regulator supply 1.5 V Filtered version of DVDD15. Special considerations for noise. Filter is not needed if SGMII is not in use. VDDR4 SRIO SerDes regulator supply 1.5 V Filtered version of DVDD15. Special considerations for noise. Filter is not needed if SRIO is not in use. DVDD18 1.8-V IO supply 1.8V AVDDA1 Main PLL supply 1.8 V Filtered version of DVDD18. Special considerations for noise. AVDDA2 DDR3 PLL supply 1.8 V Filtered version of DVDD18. Special considerations for noise. AVDDA3 PASS PLL supply 1.8 V Filtered version of DVDD18. Special considerations for noise. VREFSSTL 0.75-V DDR3 reference voltage 0.75 V Should track the 1.5-V supply. Use 1.5 V as source. VSS Ground GND VDDR6 End of Table 7-2 7.3.1 Power-Supply Sequencing This section defines the requirements for a power up sequencing from a Power-on reset condition. There are two acceptable power sequences for the device. The first sequence stipulates the core voltages starting before the IO voltages as shown below. 1. CVDD 2. CVDD1, VDDT1-3 3. DVDD18, AVDD1, AVDD2 (HHV) 4. DVDD15, VDDR1-6 The second sequence provides compatibility with other TI processors with the IO voltage starting before the core voltages as shown below. 1. DVDD18, AVDD1, AVDD2 (HHV) 2. CVDD 98 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 3. CVDD1, VDDT1-3 4. DVDD15, VDDR1-6 This is followed by the device initialization phase. Either POR or RESETFULL may be used to trigger the end of the initialization phase, but both must be inactive for the initialization to complete. The differences between POR-controlled initialization and RESETFULL initialization are described below. The following section has a mention of REFCLK in many places. REFCLK here refers to the clock input that has been selected as the source for the Main PLL. See Figure 7-23 for more details. For more information on Power Supply sequencing see the Hardware Design Guide for KeyStone Devices (literature number SPRABI2). 7.3.1.1 POR-Controlled Device Initialization The timing diagrams in the figures below show the power sequencing and reset control of the device when RESETFULL is held high and POR is used to control the device initialization. In this mode, POR must be held low until the power has been stable for the required 100 μsec and the device initialization requirements have been met. On the rising edge of POR, the HHV signal will go inactive allowing the core to control the state of the output buffers and pulls. The POR must be held for the 100 μsec after the power has stabilized plus the time period between that100 μsec and when the clock is active in addition to the 16 μsec following the active clock. If the clock becomes active before the 100 μsec stabilization period has expired, only the additional 16 μsecs of POR is required to complete initialization. Note—REFCLK must always be active before POR can be removed. 7.3.1.1.1 Core-Before-IO Power Sequencing Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 99 ADVANCE INFORMATION The device initialization is broken into two phases. The first phase consists of the time period from the activation of the first power supply until the point in which all supplies are active and at a valid voltage level. Either of the sequencing scenarios described above can be implemented during this phase. The figures below show both the core-before-IO voltage sequence and the IO-before-core voltage sequence. POR must be held low for the entire power stabilization phase. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com The timing diagram for core-before-IO power sequencing is shown in Figure 7-5 and defined in Table 7-3. Figure 7-5 POR-Controlled Power Sequencing — Core Before IO Pow er Stabilization Phase C hip Initialization Phase POR z R ESETFULLz ADVANCE INFORMATION t4b RESET z t1 C VD D(core AVS) t2a t5 CVDD1 (core constant) t6 t7 t3 DVDD18 (1.8V) t2b DVDD15 (1.5V) t4a t2c REFC LKP&N D DRC LKP&N RESET STATz PORz Controlled Reset Sequencing – Core before IO Table 7-3 POR-Controlled Power Sequencing — Core Before IO (Part 1 of 2) Time System State t1 Begin Power Stabilization Phase • CVDD (core AVS) ramps up. • POR must be held low through the power stabilization phase. Because POR is low, all the core logic that has async reset (created from POR) is put into the reset state. t2a • CVDD1 (core constant) ramps at the same time or shortly following CVDD. Although ramping CVDD1 and CVDD simultaneously is permitted, the voltage for CVDD1 must never exceed CVDD until after CVDD has reached a valid voltage. • The purpose of ramping up the core supplies close to each other is to reduce crowbar current. CVDD1 (core constant) should trail CVDD (core AVS) as this will ensure that the WLs in the memories are turned off and there is no current through the memory bit cells. If, however, CVDD1 (core constant) ramps up before CVDD (core AVS), then the worst-case current could be on the order of twice the specified draw of CVDD1. t2b • Once CVDD is valid, the clock drivers should be enabled. Although the clock inputs are not necessary at this time, they should either be driven with a valid clock or be held in a static state with one leg high and one leg low. t2c • The DDRCLK and REFCLK may begin to toggle anytime between when CVDD is at a valid level and the setup time before POR goes high specified by t7. t3 • DVDD18 (1.8 V) supply is ramped up followed coincidentally by HHV (1.8 V). • Filtered versions of 1.8 V can ramp simultaneously with DVDD18. • RESETSTAT is driven low once the DVDD18 supply is available. • All LVCMOS input and bidirectional pins must not be driven or pulled high until DVDD18 is present. Driving an input or bidirectional pin before DVDD18 is valid could cause damage to the device. t4a • DVDD15 (1.5 V) supply is ramped up following DVDD18. Although ramping DVDD18 and DVDD15 simultaneously is permitted, the voltage for DVDD15 must never exceed DVDD18. 100 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-3 POR-Controlled Power Sequencing — Core Before IO (Part 2 of 2) Time System State t4b • RESETFULL and RESET may be driven high anytime after DVDD18 is at a valid level. In a POR controlled boot both RESETFULL and RESET must be high before POR is driven high. t5 • POR must continue to remain low for at least 100 μs after power has stabilized. End Power Stabilization Phase t6 • Device initialization requires 500 REFCLK periods after the Power Stabilization Phase. The maximum clock period is 33.33 nsec, so a delay of an additional 16 μs is required before a rising edge of POR. The clock must be active during the entire 16 μs. t7 • The rising edge of POR will remove the reset to the efuse farm, allowing the scan to begin. • Once device initialization and the efuse farm scan are complete, the RESETSTAT signal is driven high. This delay will be 10000 to 50000 clock cycles. ADVANCE INFORMATION End Device Initialization Phase End of Table 7-3 7.3.1.1.2 IO-Before-Core Power Sequencing The timing diagram for IO-before-core power sequencing is shown in Figure 7-6 and defined in Table 7-4. Figure 7-6 POR-Controlled Power Sequencing — IO Before Core Power Stabilization Phase C hip Initialization Phase PORz RESETF ULLz R ESETz t2a CVDD(core AVS) t3a t2b CVD D1 (core constant) t6 t1 t4 DVDD18 (1.8V) DVDD15 (1.5V) t7 t5 t3c t3b REFCLKP&N D DRCLKP&N RESETST ATz PORz Controlled Reset Sequencing – IO before Core Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 101 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-4 www.ti.com POR-Controlled Power Sequencing — IO Before Core ADVANCE INFORMATION Time System State t1 Begin Power Stabilization Phase • DVDD18 (1.8 V) supply is ramped up followed coincidentally by HHV (1.8 V). • Since POR is low all the core logic having async reset (created from POR) are put into reset state once the core supply ramps. POR must remain low through Power Stabilization Phase. • Filtered versions of 1.8V can ramp simultaneously with DVDD18. • RESETSTAT is driven low once the DVDD18 supply is available. • All input and bidirectional pins must not be driven or pulled high until DVDD18 is present. Driving an input or bidirectional pin before DVDD18 could cause damage to the device. t2a • RESETFULL and RESET may be driven high anytime after DVDD18 is at a valid level. In a POR-controlled boot both RESETFULL and RESET must be high before POR is driven high. t2b • CVDD (core AVS) ramps up. t3a • CVDD1 (core constant) ramps at the same time or following CVDD. Although ramping CVDD1 and CVDD simultaneously is permitted the voltage for CVDD1 must never exceed CVDD until after CVDD has reached a valid voltage. • The purpose of ramping up the core supplies close to each other is to reduce crowbar current. CVDD1 (core constant) should trail CVDD (core AVS) as this will ensure that the WLs in the memories are turned off and there is no current through the memory bit cells. If, however, CVDD1 (core constant) ramps up before CVDD (core AVS) then the worst case current could be on the order of twice the specified draw of CVDD1. t3b • Once CVDD is valid the clock drivers should be enabled. Although the clock inputs are not necessary at this time they should either be driven with a valid clock or held is a static state with one leg high and one leg low. t3c • The DDRCLK and REFCLK may begin to toggle anytime between when CVDD is at a valid level and the setup time before POR goes high specified by t7. t4 • DVDD15 (1.5 V) supply is ramped up following CVDD1. t5 • POR must continue to remain low for at least 100 μs after power has stabilized. End Power Stabilization Phase t6 Begin Device Initialization • Device initialization requires 500 REFCLK periods after the Power Stabilization Phase. The maximum clock period is 33.33 nsec so a delay of an additional 16 μs is required before a rising edge of POR. The clock must be active during the entire 16 μs. • POR must remain low. t7 • The rising edge of the POR will remove the reset to the efuse farm allowing the scan to begin. • Once device initialization and the efuse farm scan are complete, the RESETSTAT signal is driven high. This delay will be 10000 to 50000 clock cycles. End Device Initialization Phase End of Table 7-4 7.3.1.2 RESETFULL-Controlled Device Initialization The timing diagrams in the figures below show the power sequencing and reset control of the device when RESETFULL is used to extend device initialization. In this mode, POR may be removed after the power has been stable for the required 100 μsec, but RESETFULL may be held low until the device initialization requirements have been met. On the rising edge of POR, the HHV signal will go inactive. Note—REFCLK must always be active before POR can be removed. 7.3.1.2.1 Core-Before-IO Power Sequencing 102 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com The timing diagram for core-before-IO power sequencing is shown in Figure 7-7 and defined in Table 7-5. Figure 7-7 RESETFULL-Controlled Device Initialization — Core Before IO Power Stabilization Phase Chip Initialization Phase PORz t7 RESET FULLz R ESETz t1 t4b CVDD(core AVS) CVDD1 (core constant) t6 t3 D VD D18 (1.8V) t2b t4a t8 t2c DVDD15 (1.5V) R EF CLKP&N DD RCLKP&N RESET STATz RESETFULLz Controlled Reset Sequencing – Core before IO Table 7-5 RESETFULL-Controlled Device Initialization — Core Before IO (Part 1 of 2) Time System State t1 Begin Power Stabilization Phase • CVDD (core AVS) ramps up. • POR must be held low through the power stabilization phase. Because POR is low, all the core logic that has async reset (created from POR) is put into the reset state. t2a • CVDD1 (core constant) ramps at the same time or shortly following CVDD. Although ramping CVDD1 and CVDD simultaneously is permitted, the voltage for CVDD1 must never exceed CVDD until after CVDD has reached a valid voltage. • The purpose of ramping up the core supplies close to each other is to reduce crowbar current. CVDD1 (core constant) should trail CVDD (core AVS) as this will ensure that the WLs in the memories are turned off and there is no current through the memory bit cells. If, however, CVDD1 (core constant) ramps up before CVDD (core AVS), then the worst-case current could be on the order of twice the specified draw of CVDD1. t2b • Once CVDD is valid the clock drivers should be enabled. Although the clock inputs are not necessary at this time, they should either be driven with a valid clock or held is a static state with one leg high and one leg low. t2c • The DDRCLK and REFCLK may begin to toggle anytime between when CVDD is at a valid level and the setup time before POR goes high specified by t7. t3 • DVDD18 (1.8 V) supply is ramped up followed coincidentally by HHV (1.8 V). • Filtered versions of 1.8 V can ramp simultaneously with DVDD18. • RESETSTAT is driven low once the DVDD18 supply is available. • All LVCMOS input and bidirectional pins must not be driven or pulled high until DVDD18 is present. Driving an input or bidirectional pin before DVDD18 is valid could cause damage to the device t4a • DVDD15 (1.5 V) supply is ramped up following DVDD18. Although ramping DVDD18 and DVDD15 simultaneously is permitted, the voltage for DVDD15 must never exceed DVDD18. t4b • RESET may be driven high anytime after DVDD18 is at a valid level. In a RESETFULL-controlled boot, both POR and RESET must be high before RESETFULL is driven high. t5 • POR must continue to remain low for at least 100 μs after power has stabilized. End Power Stabilization Phase Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 103 ADVANCE INFORMATION t5 t2a TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-5 www.ti.com RESETFULL-Controlled Device Initialization — Core Before IO (Part 2 of 2) Time System State t6 Begin Device Initialization Phase • Device initialization requires 500 REFCLK periods after the Power Stabilization Phase. The maximum clock period is 33.33 nsec, so a delay of an additional 16 μs is required before a rising edge of POR. The clock must be active during the entire 16 μs. In RESETFULL-controlled boot, the RESETFULL signal will continue to be low after POR transitions high. t7 • RESETFULL is held low for some period after POR has transitioned high. t8 • The rising edge of the RESETFULL will remove the reset to the efuse farm, allowing the scan to begin. • Once device initialization and the efuse farm scan are complete, the RESETSTAT signal is driven high. This delay will be 10000 to 50000 clock cycles. End Device Initialization Phase ADVANCE INFORMATION End of Table 7-5 7.3.1.2.2 IO-Before-Core Power Sequencing The timing diagram for core-before-IO power sequencing is shown in Figure 7-8 and defined in Table 7-6. Figure 7-8 RESETFULL-Controlled Device Initialization — IO Before Core Pow er Stabilization Phase C hip Initialization Phase POR z t7 R ESETFULLz RESET z C VD D(core AVS) t5 t3a t2b t6 t2a CVDD1 (core constant) DVDD18 (1.8V) t4 t8 t1 t3c DVDD15 (1.5V) t3b REFC LKP&N D DRC LKP&N RESET STATz RESETFULLz Controlled Reset Sequencing – IO before Core 104 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com RESETFULL-Controlled Device Initialization — IO Before Core Time System State t1 Begin Power Stabilization Phase • DVDD18 (1.8 V) supply is ramped up followed coincidentally by HHV (1.8 V). • Because POR is low, all the core logic that has async reset (created from POR) is put into the reset state once the core supply ramps. POR must remain low through the Power Stabilization Phase. • Filtered versions of 1.8V can ramp simultaneously with DVDD18. • RESETSTAT is driven low once the DVDD18 supply is available. • All input and bidirectional pins must not be driven or pulled high until DVDD18 is present. Driving an input or bidirectional pin before DVDD18 could cause damage to the device. t2a • RESET may be driven high anytime after DVDD18 is at a valid level. In a RESETFULL-controlled boot both POR and RESET must be high before RESETFULL is driven high. t2b • CVDD (core AVS) ramps up. t3a CVDD1 (core constant) ramps at the same time or following CVDD. Although ramping CVDD1 and CVDD simultaneously is permitted the voltage for CVDD1 must never exceed CVDD until after CVDD has reached a valid voltage. The purpose of ramping up the core supplies close to each other is to reduce crowbar current. CVDD1 (core constant) should trail CVDD (core AVS) as this will ensure that the WLs in the memories are turned off and there is no current through the memory bit cells. If, however, CVDD1 (core constant) ramps up before CVDD (core AVS) then the worst case current could be on the order of twice the specified draw of CVDD1. t3b • Once CVDD is valid, the clock drivers should be enabled. Although the clock inputs are not necessary at this time, they should either be driven with a valid clock or held is a static state with one leg high and one leg low. t3c • The DDRCLK and REFCLK may begin to toggle anytime between when CVDD is at a valid level and the setup time before POR goes high specified by t7. t4 • DVDD15 (1.5 V) supply is ramped up following CVDD1. t5 • POR must continue to remain low for at least 100 μs after power has stabilized. End Power Stabilization Phase t6 Begin Device Initialization • Device initialization requires 500 REFCLK periods after the Power Stabilization Phase. The maximum clock period is 33.33 nsec so a delay of an additional 16 μs is required before a rising edge of POR. The clock must be active during the entire 16 μs. • POR must remain low. t7 • RESETFULL is held low for some period after POR has transitioned high. • The rising edge of the RESETFULL will remove the reset to the efuse farm allowing the scan to begin. t8 • The rising edge of the RESETFULL will remove the reset to the efuse farm allowing the scan to begin. • Once device initialization and the efuse farm scan are complete the RESETSTAT signal is driven high. This delay will be 10000 to 50000 clock cycles. End Device Initialization Phase End of Table 7-6 7.3.1.3 Prolonged Resets Holding the device in POR, RESETFULL, or RESET for long periods of time will affect the long term reliability of the part. The device should not be held in a reset for times exceeding one hour and should not be held in reset for more the 5% of the time during which power is applied. Exceeding these limits will cause a gradual reduction in the reliability of the part. This can be avoided by allowing the DSP to boot and then configuring it to enter a hibernation state soon after power is applied. This will satisfy the reset requirement while limiting the power consumption of the device. 7.3.2 Power-Down Sequence The power down sequence is the exact reverse of the power-up sequence described above. The goal is to prevent a large amount of static current and to prevent overstress of the device. A power-good circuit that monitors all the supplies for the device should be used in all designs. If a catastrophic power supply failure occurs on any voltage rail, POR should transition to low to prevent over-current conditions that could possibly impact device reliability. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 105 ADVANCE INFORMATION Table 7-6 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com A system power monitoring solution is needed to shut down power to the board if a power supply fails. Long-term exposure to an environment in which one of the power supply voltages is no longer present will affect the reliability of the device. Holding the device in reset is not an acceptable solution because prolonged periods of time with an active reset can also affect long term reliability. Some of the clock inputs are required to be present for the device to initialize correctly, but behavior of many of the clocks is contingent on the state of the boot configuration pins. Table 7-7 describes the clock sequencing and the conditions that affect the clock operation. Note that all clock drivers should be in a high-impedance state until CVDD is at a valid level and that all clock inputs either be active or in a static state with one leg pulled low and the other connected to CVDD. ADVANCE INFORMATION Table 7-7 Clock Sequencing Clock Condition Sequencing DDRCLK None Must be present 16 μsec before POR transitions high. SYSCLK ALTCORECLK PASSCLK CORECLKSEL = 0 SYSCLK used to clock the core PLL. It must be present 16 μsec before POR transitions high. CORECLKSEL = 1 SYSCLK used only for AIF. Clock most be present before the reset to the AIF is removed. CORECLKSEL = 0 ALTCORECLK is not used and should be tied to a static state. CORECLKSEL = 1 ALTCORECLK is used to clock the core PLL. It must be present 16 μsec before POR transitions high. PASSCLKSEL = 0 PASSCLK is not used and should be tied to a static state. PASSCLKSEL = 1 PASSCLK is used as a source for the PA_SS PLL. It must be present before the PA_SS PLL is removed from reset and programmed. An SGMII port will be used. SRIOSGMIICLK must be present 16 μsec before POR transitions high. SGMII will not be used. SRIO SRIOSGMIICLK must be present 16 μsec before POR transitions high. will be used as a boot device. SRIOSGMIICLK SGMII will not be used. SRIO will be used after boot. PCIECLK MCMCLK SRIOSGMIICLK is used as a source to the SRIO SERDES PLL. It must be present before the SRIO is removed from reset and programmed. SGMII will not be used. SRIO will not be used. SRIOSGMIICLK is not used and should be tied to a static state. PCIE will be used as a boot device. PCIECLK must be present 16 μsec before POR transitions high. PCIE will be used after boot. PCIECLK is used as a source to the PCIE SERDES PLL. It must be present before the PCIE is removed from reset and programmed. PCIE will not be used. PCIECLK is not used and should be tied to a static state. HyperLink will be used as a boot device. MCMCLK must be present 16usec before POR transitions high. HyperLink will be used after boot. MCMCLK is used as a source to the MCM SERDES PLL. It must be present before the HyperLink is removed from reset and programmed. HyperLink will not be used. MCMCLK is not used and should be tied to a static state. End of Table 7-7 7.3.3 Power Supply Decoupling and Bulk Capacitors In order to properly decouple the supply planes on the PCB from system noise, decoupling and bulk capacitors are required. Bulk capacitors are used to minimize the effects of low frequency current transients and decoupling or bypass capacitors are used to minimize higher frequency noise. For recommendations on selection of Power Supply Decoupling and Bulk capacitors see the Hardware Design Guide for KeyStone Devices (literature number SPRABI2). 106 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.3.4 SmartReflex Texas Instruments' SmartReflex technology is used to decrease both static and dynamic power consumption while maintaining the device performance. SmartReflex in the TMS320C6674 device is a feature that allows the core voltage to be optimized based on the process corner of the device. This requires a voltage regulator for each TMS320C6674 device. To guarantee maximizing performance and minimizing power consumption of the device, SmartReflex is required to be implemented whenever the TMS320C6674 device is used. The voltage selection is done using 4 VCNTL pins which are used to select the output voltage of the core voltage regulator. For information on implementation of SmartReflex see the Power Management for KeyStone Devices application report and the Hardware Design Guide for KeyStone Devices (literature number SPRABI2). Table 7-8 SmartReflex 4-Pin VID Interface Switching Characteristics (see Figure 7-9) No. Parameter Min Max Unit 1 tosu(Bn-SELECTL) Setup Time - VCNTL[2:0] (B[2:0]]) valid before VCNTL[3] (Select) low 35.00 μs 2 toh(SELECTL-Bn) Hold Time - VCNTL[2:0] (B[2:0]]) valid after VCNTL[3] (Select) low 35.00 μs 3 tosu(Bn-SELECTH) Setup Time - VCNTL[2:0] (B[2:0]]) valid before VCNTL[3] (Select) high 35.00 μs 4 toh(SELECTH-Bn) Hold Time - VCNTL[2:0] (B[2:0]]) valid after VCNTL[3] (Select) high 35.00 μs End of Table 7-8 Figure 7-9 SmartReflex 4-Pin VID Interface Timing 2 1 4 3 VCNTL[3] (Select) VCNTL[2:0] (B[2:0]) Table 7-9 LSB VID[2:0] MSB VID[5:3] SmartReflex I2C Interface Timing Requirements (1) (Part 1 of 2) (see Figure 7-10) Standard Mode No. Min 1 tc(VCL) 2 3 4 tw(VCLL) Pulse duration, VCL low 5 tw(VCLH) Pulse duration, VCL high Max Fast Mode Min Max Cycle time, VCL 10 tsu(VCLH-VDL) Setup Time, VCL high before VD low (for a repeated START condition) 4.7 0.6 μs th(VDL-VCLL) Hold time, VCL low after VD low (for a START and a repeated START condition 4 0.6 μs Copyright 2010 Texas Instruments Incorporated 2.5 Unit s μs 4.7 1.3 μs 4 0.6 μs TMS320C6674 Peripheral Information and Electrical Specifications 107 ADVANCE INFORMATION Increasing the device complexity increases its power consumption and with the smaller transistor structures responsible for higher achievable clock rates and increased performance, comes an inevitable penalty, increasing the leakage currents. Leakage currents are present in any active circuit, independently of clock rates and usage scenarios. This static power consumption is mainly determined by transistor type and process technology. Higher clock rates also increase dynamic power, the power used when transistors switch. The dynamic power depends mainly on a specific usage scenario, clock rates, and I/O activity. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com SmartReflex I2C Interface Timing Requirements (1) (Part 2 of 2) Table 7-9 (see Figure 7-10) Standard Mode No. Min 6 tsu(VDV-VCLH) Setup time, VD valid before VCL high Fast Mode Max Min 250 100 (2) (3) (3) 3.45 0 Max Unit s ns 0.9 (4) μs ADVANCE INFORMATION 7 th(VCLL-VD) Hold time, VD valid after VCL low (for IIC bus devices) 0 8 tw(VDH) Pulse duration, VD high between STOP and START conditions 4.7 9 tr(SDA) Rise time, SDA 1000 20 + 0.1Cb (5) 300 μs 10 tr(SCL) Rise time, SCL 1000 20 + 0.1Cb (5) 300 ns 11 tf(SDA) Fall time, SDA 300 20 + 0.1Cb (5) 300 ns 12 tf(SCL) Fall time, SCL 300 20 + 0.1Cb (5) 300 ns 13 tsu(VCLH-VDH) Setup time, high before VD high (for STOP condition) 4 14 tw(SP) 0 50 ns 400 pF Cb Pulse duration, spike (must be suppressed) (5) 1.3 μs 0.6 50 Capacitive load for each bus line μs 0 400 End of Table 7-9 2 1 The I C pins SDA and SCL do not feature fail-safe I/O buffers. These pins could potentially draw current when the device is powered down 2 2 2 A Fast-mode I C-bus™ device can be used in a Standard-mode I C-bus™ system, but the requirement tsu(SDA-SCLH) ≥ 250 ns must then be met. This will automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next data bit to the 2 SDA line tr max + tsu(SDA-SCLH) = 1000 + 250 = 1250 ns (according to the Standard-mode I C-Bus Specification) before the SCL line is released. 3 A device must internally provide a hold time of at least 300 ns for the SDA signal (referred to the VIHmin of the SCL signal) to bridge the undefined region of the falling edge of SCL. 4 The maximum th(SDA-SCLL) has only to be met if the device does not stretch the low period [tw(SCLL)] of the SCL signal. 5 Cb = total capacitance of one bus line in pF. If mixed with HS-mode devices, faster fall-times are allowed. SmartReflex I2C Interface Receive Timings Figure 7-10 11 9 SDA 8 6 4 14 13 5 10 SCL 12 1 3 7 2 3 Stop Table 7-10 Start Repeated Start Stop SmartReflex I2C Interface Switching Characteristics (1) (Part 1 of 2) (see Figure 7-11) Standard Mode No. Parameter 16 tc(VCL) 17 tosu(VCLH-VDL) Setup Time, VCL high before VD low (for a repeated START condition) Min Cycle time, VCL 18 toh(VDL-VCLL) Hold time, VCL low after VD low (for a START and a repeated START condition 19 tw(VCLL) Pulse duration, VCL low 20 tw(VCLH) Pulse duration, VCL high 21 tosu(VDV-VCLH) Setup time, VD valid before VCL high 22 toh(VCLL-VD) 108 Hold time, VD valid after VCL low (for IIC bus devices) TMS320C6674 Peripheral Information and Electrical Specifications Max Fast Mode Min Max Unit 10 2.5 ms 4.7 0.6 ms 4 0.6 ms 4.7 1.3 ms 4 0.6 ms 250 100 ns 0 0 0.9 ms Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2 Table 7-10 SmartReflex I C Interface Switching Characteristics (1) (Part 2 of 2) (see Figure 7-11) No. 23 tw(VDH) Parameter Min Pulse duration, VD high between STOP and START conditions 4.7 Fast Mode Max Min Max Unit 1.3 ms 24 tr(SDA) Rise time, SDA 1000 20 + 0.1Cb (1) 300 ns 25 tr(SCL) Rise time, SCL 1000 20 + 0.1Cb (1) 300 ns 300 ns 300 ns 10 pF 26 tf(SDA) Fall time, SDA 300 20 + 0.1Cb (1) 27 tf(SCL) Fall time, SCL 300 20 + 0.1Cb (1) 28 tsu(VCLH-VDH) Setup time, high before VD high (for STOP condition) Cp Capacitance for each I2C pin 4 0.6 10 ms End of Table 7-10 1 Cb = total capacitance of one bus line in pF. If mixed with HS-mode devices, faster fall-times are allowed. Figure 7-11 SmartReflex I2C Interface Transmit Timings 24 26 SDA 23 21 19 28 20 25 SCL 27 16 18 22 17 18 Stop Start Copyright 2010 Texas Instruments Incorporated Repeated Start Stop TMS320C6674 Peripheral Information and Electrical Specifications 109 ADVANCE INFORMATION Standard Mode TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.4 Enhanced Direct Memory Access (EDMA3) Controller The primary purpose of the EDMA3 is to service user-programmed data transfers between two memory-mapped slave endpoints on the device. The EDMA3 services software-driven paging transfers (e.g., data movement between external memory and internal memory), performs sorting or subframe extraction of various data structures, services event driven peripherals, and offloads data transfers from the device CPU. There are 3 EDMA Channel Controllers on the C6674 DSP, TPCC0, TPCC1, and TPCC2. TPCC0 is optimized to be used for transfers to/from/within the MSMC and DDR-3 Subsytems. The others are to be used for the remaining traffic. ADVANCE INFORMATION Each EDMA3 Channel Controller includes the following features: • Fully orthogonal transfer description – 3 transfer dimensions: › Array (multiple bytes) › Frame (multiple arrays) › Block (multiple frames) – Single event can trigger transfer of array, frame, or entire block – Independent indexes on source and destination • Flexible transfer definition: – Increment or FIFO transfer addressing modes – Linking mechanism allows for ping-pong buffering, circular buffering, and repetitive/continuous transfers, all with no CPU intervention – Chaining allows multiple transfers to execute with one event • 128 PaRAM entries for TPCC0, 512 each for TPCC1 and TPCC2 – Used to define transfer context for channels – Each PaRAM entry can be used as a DMA entry, QDMA entry, or link entry • 16 DMA channels for TPCC0, 64 each for TPCC1 and TPCC2 – Manually triggered (CPU writes to channel controller register), external event triggered, and chain triggered (completion of one transfer triggers another) • 8 Quick DMA (QDMA) channels per EDMA 3 Channel Controller – Used for software-driven transfers – Triggered upon writing to a single PaRAM set entry • 2 transfer controllers and 2 event queues with programmable system-level priority for TPCC0, 4 transfer controllers and 4 event queues with programmable system-level priority per channel controller for TPCC1 and TPCC2 • Interrupt generation for transfer completion and error conditions • Debug visibility – Queue watermarking/threshold allows detection of maximum usage of event queues – Error and status recording to facilitate debug In the context of this document, TPTCs associated with TPCC0 are referred to as TPCC0 TPTC0 and1. TPTCs associated with TPCC1 and 2 are each referred to as TPCCx TPTC0 - 3, where x is 1 or 2. Each of the transfer controllers has a direct connection to the switched central resource (SCR). ‘‘DSP/2 Data SCR Connection Matrix’’ on page 80 and ‘‘DSP/3 Data SCR Connection Matrix’’ on page 82 lists the peripherals that can be accessed by the transfer controllers. 110 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.4.1 EDMA3 Device-Specific Information For the range of memory addresses that include EDMA3 Channel Controller (TPCC) Control Registers and EDMA3 Transfer Controller (TPTC) Control Register see Section Table 2-2‘‘Memory Map Summary for TMS320C6674’’ on page 19. For memory offsets and other details on TPCC and TPTC Control Registers entries, see the Enhanced Direct Memory Access 3 (EDMA3) for KeyStone Devices User Guide (literature number SPRUGS5) for offset addresses on Parameter RAM (PaRAM) registers. Table 7-11 EDMA3 Parameter RAM Contents (1) PaRAM Set Number Offset Address Parameters 0 4000h to 401Fh PaRAM set 0 1 4020h to 403Fh PaRAM set 1 2 4040h to 405Fh PaRAM set 2 3 4060h to 407Fh PaRAM set 3 4 4080h to 409Fh PaRAM set 4 5 40A0h to 40BFh PaRAM set 5 6 40C0h to 40DFh PaRAM set 6 7 40E0h to 40FFh PaRAM set 7 8 4100h to 411Fh PaRAM set 8 9 4120h to 413Fh PaRAM set 9 ... ... ... 63 47E0h to 47FFh PaRAM set 63 64 4800h to 481Fh PaRAM set 64 65 4820h to 483Fh PaRAM set 65 ... ... ... 254 5FC0h to 5FDFh PaRAM set 254 255 5FE0h to 5FFFh PaRAM set 255 ... ... ... 510 7FC0h to 7FDFh PaRAM set 254 511 7FE0h to 7FFFh PaRAM set 255 1 A PaRAM set can be configured for use with either DMA channel, QDMA channel, or as a reload link set. 7.4.2 EDMA3 Channel Synchronization Events The EDMA3 supports up to 16 DMA channels for TPCC0, 64 each for TPCC1 and TPCC2 that can be used to service system peripherals and to move data between system memories. DMA channels can be triggered by synchronization events generated by system peripherals. The following tables lists the source of the synchronization event associated with each of the EDMA TPCC DMA channels. On the C6674, the association of each synchronization event and DMA channel is fixed and cannot be reprogrammed. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 111 ADVANCE INFORMATION The EDMA supports two addressing modes: constant addressing and increment addressing mode. Constant addressing mode is applicable to a very limited set of use cases; for most applications increment mode can be used. On the C6674 DSP, the EDMA can use constant addressing mode only with the Enhanced Viterbi-Decoder Coprocessor (VCP) and the Enhanced Turbo Decoder Coprocessor (TCP). Constant addressing mode is not supported by any other peripheral or internal memory in the DSP. Note that increment mode is supported by all peripherals, including VCP and TCP. For more information on these two addressing modes, see the Enhanced Direct Memory Access 3 (EDMA3) for KeyStone Devices User Guide (literature number SPRUGS5). TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com For more detailed information on the EDMA3 module and how EDMA3 events are enabled, captured, processed, prioritized, linked, chained, and cleared, etc., see the Enhanced Direct Memory Access 3 (EDMA3) for KeyStone Devices User Guide (literature number SPRUGS5). Table 7-12 TPCC0 Events for C6674 ADVANCE INFORMATION Event Number Event Event Description 0 TINT8L Timer 8 interrupt low 1 TINT8H Timer 8 interrupt high 2 TINT9L Timer 9 interrupt low 3 TINT9H Timer 9 interrupt high 4 TINT10L Timer 10 interrupt low 5 TINT10H Timer 10 interrupt high 6 TINT11L Timer 11 interrupt low 7 TINT11H Timer 11 interrupt high 8 INTC3_OUT0 Interrupt Controller Output 9 INTC3_OUT1 Interrupt Controller Output 10 INTC3_OUT2 Interrupt Controller Output 11 INTC3_OUT3 Interrupt Controller Output 12 INTC3_OUT4 Interrupt Controller Output 13 INTC3_OUT5 Interrupt Controller Output 14 INTC3_OUT6 Interrupt Controller Output 15 INTC3_OUT7 Interrupt Controller Output End of Table 7-12 Table 7-13 TPCC1 Events for C6674 (Part 1 of 2) Event Number Event Event Description 0 SPIINT0 SPI interrupt 1 SPIINT1 SPI interrupt 2 SPIXEVT Transmit event 3 SPIREVT Receive event 4 I2CREVT I2C Receive event 5 I2CXEVT I2C Transmit event 6 GPINT0 GPIO Interrupt 7 GPINT1 GPIO Interrupt 8 GPINT2 GPIO Interrupt 9 GPINT3 GPIO Interrupt 10 GPINT4 GPIO Interrupt 11 GPINT5 GPIO Interrupt 12 GPINT6 GPIO Interrupt 13 GPINT7 GPIO Interrupt 14 SEMINT0 Semaphore interrupt 15 SEMINT1 Semaphore interrupt 16 SEMINT2 Semaphore interrupt 17 SEMINT3 Semaphore interrupt 18 SEMINT4 Semaphore interrupt 19 SEMINT5 Semaphore interrupt 20 SEMINT6 Semaphore interrupt 112 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com TPCC1 Events for C6674 (Part 2 of 2) Event Number Event Event Description 21 SEMINT7 Semaphore interrupt 22 TINT8L Timer interrupt low 23 TINT8H Timer interrupt high 24 TINT9L Timer interrupt low 25 TINT9H Timer interrupt high 26 TINT10L Timer interrupt low 27 TINT10H Timer interrupt high 28 TINT11L Timer interrupt low 29 TINT11H Timer interrupt high 30 TINT12L Timer interrupt low 31 TINT12H Timer interrupt high 32 TINT13L Timer interrupt low 33 TINT13H Timer interrupt high 34 TINT14L Timer interrupt low 35 TINT14H Timer interrupt high 36 TINT15L Timer interrupt low 37 TINT15H Timer interrupt high 38 INTC2_OUT44 Interrupt Controller Output 39 INTC2_OUT45 Interrupt Controller Output 40 INTC2_OUT46 Interrupt Controller Output 41 INTC2_OUT47 Interrupt Controller Output 42 INTC2_OUT0 Interrupt Controller Output 43 INTC2_OUT1 Interrupt Controller Output 44 INTC2_OUT2 Interrupt Controller Output 45 INTC2_OUT3 Interrupt Controller Output 46 INTC2_OUT4 Interrupt Controller Output 47 INTC2_OUT5 Interrupt Controller Output 48 INTC2_OUT6 Interrupt Controller Output 49 INTC2_OUT7 Interrupt Controller Output 50 INTC2_OUT8 Interrupt Controller Output 51 INTC2_OUT9 Interrupt Controller Output 52 INTC2_OUT10 Interrupt Controller Output 53 INTC2_OUT11 Interrupt Controller Output 54 INTC2_OUT12 Interrupt Controller Output 55 INTC2_OUT13 Interrupt Controller Output 56 INTC2_OUT14 Interrupt Controller Output 57 INTC2_OUT15 Interrupt Controller Output 58 INTC2_OUT16 Interrupt Controller Output 59 INTC2_OUT17 Interrupt Controller Output 60 INTC2_OUT18 Interrupt Controller Output 61 INTC2_OUT19 Interrupt Controller Output 62 INTC2_OUT20 Interrupt Controller Output 63 INTC2_OUT21 Interrupt Controller Output ADVANCE INFORMATION Table 7-13 End of Table 7-13 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 113 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-14 www.ti.com TPCC3 Events for C6674 (Part 1 of 2) ADVANCE INFORMATION Event Number Event Event Description 0 SPIINT0 SPI interrupt 1 SPIINT1 SPI interrupt 2 SPIXEVT Transmit event 3 SPIREVT Receive event 4 I2CREVT I2C Receive event 5 I2CXEVT I2C Transmit event 6 GPINT0 GPIO Interrupt 7 GPINT1 GPIO Interrupt 8 GPINT2 GPIO Interrupt 9 GPINT3 GPIO Interrupt 10 GPINT4 GPIO Interrupt 11 GPINT5 GPIO Interrupt 12 GPINT6 GPIO Interrupt 13 GPINT7 GPIO Interrupt 14 SEMINT0 Semaphore interrupt 15 SEMINT1 Semaphore interrupt 16 SEMINT2 Semaphore interrupt 17 SEMINT3 Semaphore interrupt 18 SEMINT4 Semaphore interrupt 19 SEMINT5 Semaphore interrupt 20 SEMINT6 Semaphore interrupt 21 SEMINT7 Semaphore interrupt 22 TINT8L Timer interrupt low 23 TINT8H Timer interrupt high 24 TINT9L Timer interrupt low 25 TINT9H Timer interrupt high 26 TINT10L Timer interrupt low 27 TINT10H Timer interrupt high 28 TINT11L Timer interrupt low 29 TINT11H Timer interrupt high 30 TINT12L Timer interrupt low 31 TINT12H Timer interrupt high 32 TINT13L Timer interrupt low 33 TINT13H Timer interrupt high 34 TINT14L Timer interrupt low 35 TINT14H Timer interrupt high 36 TINT15L Timer interrupt low 37 TINT15H Timer interrupt high 38 INTC2_OUT48 Interrupt Controller Output 39 INTC2_OUT49 Interrupt Controller Output 40 URXEVT UART Receive event 41 UTXEVT UART Transmit event 42 INTC2_OUT22 Interrupt Controller Output 43 INTC2_OUT23 Interrupt Controller Output 114 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com TPCC3 Events for C6674 (Part 2 of 2) Event Number Event Event Description 44 INTC2_OUT24 Interrupt Controller Output 45 INTC2_OUT25 Interrupt Controller Output 46 INTC2_OUT26 Interrupt Controller Output 47 INTC2_OUT27 Interrupt Controller Output 48 INTC2_OUT28 Interrupt Controller Output 49 INTC2_OUT29 Interrupt Controller Output 50 INTC2_OUT30 Interrupt Controller Output 51 INTC2_OUT31 Interrupt Controller Output 52 INTC2_OUT32 Interrupt Controller Output 53 INTC2_OUT33 Interrupt Controller Output 54 INTC2_OUT34 Interrupt Controller Output 55 INTC2_OUT35 Interrupt Controller Output 56 INTC2_OUT36 Interrupt Controller Output 57 INTC2_OUT37 Interrupt Controller Output 58 INTC2_OUT38 Interrupt Controller Output 59 INTC2_OUT39 Interrupt Controller Output 60 INTC2_OUT40 Interrupt Controller Output 61 INTC2_OUT41 Interrupt Controller Output 62 INTC2_OUT42 Interrupt Controller Output 63 INTC2_OUT43 Interrupt Controller Output ADVANCE INFORMATION Table 7-14 End of Table 7-14 7.4.3 EDMA3 Peripheral Register Description(s) Table 7-15 EDMA3 Channel Controller 0 Registers (Part 1 of 12) Hex Address Acronym 0270 0000 PID Register Name Peripheral ID Register 0270 0004 CCCFG 0270 0008 - 0270 00FC - EDMA3CC Configuration Register 0270 0100 DCHMAP0 DMA Channel 0 Mapping Register 0270 0104 DCHMAP1 DMA Channel 1 Mapping Register Reserved 0270 0108 DCHMAP2 DMA Channel 2 Mapping Register 0270 010C DCHMAP3 DMA Channel 3 Mapping Register 0270 0110 DCHMAP4 DMA Channel 4 Mapping Register 0270 0114 DCHMAP5 DMA Channel 5 Mapping Register 0270 0118 DCHMAP6 DMA Channel 6 Mapping Register 0270 011C DCHMAP7 DMA Channel 7 Mapping Register 0270 0120 DCHMAP8 DMA Channel 8 Mapping Register 0270 0124 DCHMAP9 DMA Channel 9 Mapping Register 0270 0128 DCHMAP10 DMA Channel 10 Mapping Register 0270 012C DCHMAP11 DMA Channel 11 Mapping Register 0270 0130 DCHMAP12 DMA Channel 12 Mapping Register 0270 0134 DCHMAP13 DMA Channel 13 Mapping Register 0270 0138 DCHMAP14 DMA Channel 14 Mapping Register 0270 013C DCHMAP15 DMA Channel 15 Mapping Register Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 115 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-15 ADVANCE INFORMATION 116 www.ti.com EDMA3 Channel Controller 0 Registers (Part 2 of 12) Hex Address Acronym 0270 0140 ~ 0270 01FC Reserved Register Name 0270 0200 QCHMAP0 QDMA Channel 0 Mapping Register 0270 0204 QCHMAP1 QDMA Channel 1 Mapping Register 0270 0208 QCHMAP2 QDMA Channel 2 Mapping Register 0270 020C QCHMAP3 QDMA Channel 3 Mapping Register 0270 0210 QCHMAP4 QDMA Channel 4 Mapping Register 0270 0214 QCHMAP5 QDMA Channel 5 Mapping Register 0270 0218 QCHMAP6 QDMA Channel 6 Mapping Register 0270 021C QCHMAP7 QDMA Channel 7 Mapping Register 0270 0220 - 0270 023C - 0270 0240 DMAQNUM0 DMA Queue Number Register 0 0270 0244 DMAQNUM1 DMA Queue Number Register 1 0270 0248 DMAQNUM2 DMA Queue Number Register 2 0270 024C DMAQNUM3 DMA Queue Number Register 3 0270 0250 DMAQNUM4 DMA Queue Number Register 4 0270 0254 DMAQNUM5 DMA Queue Number Register 5 0270 0258 DMAQNUM6 DMA Queue Number Register 6 0270 025C DMAQNUM7 DMA Queue Number Register 7 0270 0260 QDMAQNUM QDMA Queue Number Register 0270 0264 - 0270 027C - 0270 0280 QUETCMAP 0270 0284 QUEPRI 0270 0288 - 0270 02FC - 0270 0300 EMR 0270 0304 EMRH 0270 0308 EMCR 0270 030C EMCRH Reserved Reserved Queue to TC Mapping Register Queue Priority Register Reserved Event Missed Register Event Missed Register High Event Missed Clear Register Event Missed Clear Register High 0270 0310 QEMR QDMA Event Missed Register 0270 0314 QEMCR QDMA Event Missed Clear Register EDMA3CC Error Register 0270 0318 CCERR 0270 031C CCERRCLR 0270 0320 EEVAL 0270 0324 - 0270 033C - 0270 0340 DRAE0 0270 0344 DRAEH0 0270 0348 DRAE1 0270 034C DRAEH1 0270 0350 DRAE2 0270 0354 DRAEH2 0270 0358 DRAE3 0270 035C DRAEH3 0270 0360 DRAE4 0270 0364 DRAEH4 0270 0368 DRAE5 EDMA3CC Error Clear Register Error Evaluate Register Reserved DMA Region Access Enable Register for Region 0 DMA Region Access Enable Register High for Region 0 DMA Region Access Enable Register for Region 1 DMA Region Access Enable Register High for Region 1 DMA Region Access Enable Register for Region 2 DMA Region Access Enable Register High for Region 2 DMA Region Access Enable Register for Region 3 DMA Region Access Enable Register High for Region 3 DMA Region Access Enable Register for Region 4 DMA Region Access Enable Register High for Region 4 DMA Region Access Enable Register for Region 5 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 0 Registers (Part 3 of 12) Hex Address Acronym 0270 036C DRAEH5 0270 0370 DRAE6 0270 0374 DRAEH6 Register Name DMA Region Access Enable Register High for Region 5 DMA Region Access Enable Register for Region 6 DMA Region Access Enable Register High for Region 6 0270 0378 DRAE7 0270 037C DRAEH7 DMA Region Access Enable Register for Region 7 0270 0380 QRAE0 QDMA Region Access Enable Register for Region 0 0270 0384 QRAE1 QDMA Region Access Enable Register for Region 1 DMA Region Access Enable Register High for Region 7 0270 0388 QRAE2 QDMA Region Access Enable Register for Region 2 0270 038C QRAE3 QDMA Region Access Enable Register for Region 3 0270 0390 QRAE4 QDMA Region Access Enable Register for Region 4 0270 0394 QRAE5 QDMA Region Access Enable Register for Region 5 0270 0398 QRAE6 QDMA Region Access Enable Register for Region 6 0270 039C QRAE7 QDMA Region Access Enable Register for Region 7 0270 0400 Q0E0 Event Queue 0 Entry Register 0 0270 0404 Q0E1 Event Queue 0 Entry Register 1 0270 0408 Q0E2 Event Queue 0 Entry Register 2 0270 040C Q0E3 Event Queue 0 Entry Register 3 0270 0410 Q0E4 Event Queue 0 Entry Register 4 0270 0414 Q0E5 Event Queue 0 Entry Register 5 0270 0418 Q0E6 Event Queue 0 Entry Register 6 0270 041C Q0E7 Event Queue 0 Entry Register 7 0270 0420 Q0E8 Event Queue 0 Entry Register 8 0270 0424 Q0E9 Event Queue 0 Entry Register 9 0270 0428 Q0E10 Event Queue 0 Entry Register 10 0270 042C Q0E11 Event Queue 0 Entry Register 11 0270 0430 Q0E12 Event Queue 0 Entry Register 12 0270 0434 Q0E13 Event Queue 0 Entry Register 13 0270 0438 Q0E14 Event Queue 0 Entry Register 14 0270 043C Q0E15 Event Queue 0 Entry Register 15 0270 0440 Q1E0 Event Queue 1 Entry Register 0 0270 0444 Q1E1 Event Queue 1 Entry Register 1 0270 0448 Q1E2 Event Queue 1 Entry Register 2 0270 044C Q1E3 Event Queue 1 Entry Register 3 0270 0450 Q1E4 Event Queue 1 Entry Register 4 0270 0454 Q1E5 Event Queue 1 Entry Register 5 0270 0458 Q1E6 Event Queue 1 Entry Register 6 0270 045C Q1E7 Event Queue 1 Entry Register 7 0270 0460 Q1E8 Event Queue 1 Entry Register 8 0270 0464 Q1E9 Event Queue 1 Entry Register 9 0270 0468 Q1E10 Event Queue 1 Entry Register 10 0270 046C Q1E11 Event Queue 1 Entry Register 11 0270 0470 Q1E12 Event Queue 1 Entry Register 12 0270 0474 Q1E13 Event Queue 1 Entry Register 13 0270 0478 Q1E14 Event Queue 1 Entry Register 14 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications ADVANCE INFORMATION Table 7-15 117 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-15 ADVANCE INFORMATION 118 www.ti.com EDMA3 Channel Controller 0 Registers (Part 4 of 12) Hex Address Acronym 0270 047C Q1E15 Register Name 0270 0480 ~ 0270 05FC Reserved 0270 0600 QSTAT0 Queue Status Register 0 Queue Status Register 1 Event Queue 1 Entry Register 15 0270 0604 QSTAT1 0270 0608 - 0270 061C - 0270 0620 QWMTHRA Queue Watermark Threshold A Register 0270 0624 QWMTHRB Queue Watermark Threshold B Register Reserved 0270 0628 - 0270 063C - 0270 0640 CCSTAT Reserved 0270 0644 - 0270 06FC - Reserved 0270 0700 - 0270 07FC - Reserved 0270 0800 MPFAR Memory Protection Fault Address Register 0270 0804 MPFSR Memory Protection Fault Status Register EDMA3CC Status Register 0270 0808 MPFCR Memory Protection Fault Command Register 0270 080C MPPAG Memory Protection Page Attribute Register G 0270 0810 MPPA0 Memory Protection Page Attribute Register 0 0270 0814 MPPA1 Memory Protection Page Attribute Register 1 0270 0818 MPPA2 Memory Protection Page Attribute Register 2 0270 081C MPPA3 Memory Protection Page Attribute Register 3 0270 0820 MPPA4 Memory Protection Page Attribute Register 4 0270 0824 MPPA5 Memory Protection Page Attribute Register 5 0270 0828 MPPA6 Memory Protection Page Attribute Register 6 0270 082C MPPA7 Memory Protection Page Attribute Register 7 0270 082C - 0270 0FFC - 0270 1000 ER 0270 1004 ERH Event Register High 0270 1008 ECR Event Clear Register 0270 100C ECRH 0270 1010 ESR 0270 1014 ESRH Event Set Register High 0270 1018 CER Chained Event Register 0270 101C CERH 0270 1020 EER 0270 1024 EERH Event Enable Register High 0270 1028 EECR Event Enable Clear Register 0270 102C EECRH 0270 1030 EESR 0270 1034 EESRH 0270 1038 SER 0270 103C SERH Secondary Event Register High 0270 1040 SECR Secondary Event Clear Register 0270 1044 SECRH 0270 1048 - 0270 104C - 0270 1050 IER Reserved Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 0 Registers (Part 5 of 12) Hex Address Acronym 0270 1054 IERH 0270 1058 IECR 0270 105C IECRH 0270 1060 IESR 0270 1064 IESRH Register Name Interrupt Enable High Register Interrupt Enable Clear Register Interrupt Enable Clear High Register Interrupt Enable Set Register Interrupt Enable Set High Register 0270 1068 IPR 0270 106C IPRH Interrupt Pending Register Interrupt Pending High Register 0270 1070 ICR Interrupt Clear Register 0270 1074 ICRH 0270 1078 IEVAL 0270 107C - ADVANCE INFORMATION Table 7-15 Interrupt Clear High Register Interrupt Evaluate Register Reserved 0270 1080 QER QDMA Event Register 0270 1084 QEER QDMA Event Enable Register 0270 1088 QEECR QDMA Event Enable Clear Register 0270 108C QEESR QDMA Event Enable Set Register 0270 1090 QSER QDMA Secondary Event Register 0270 1094 QSECR QDMA Secondary Event Clear Register 0270 1098 - 0270 1FFF - Reserved Shadow Region 0 Channel Registers 0270 2000 ER 0270 2004 ERH Event Register Event Register High 0270 2008 ECR Event Clear Register 0270 200C ECRH Event Clear Register High 0270 2010 ESR 0270 2014 ESRH Event Set Register High 0270 2018 CER Chained Event Register 0270 201C CERH 0270 2020 EER 0270 2024 EERH 0270 2028 EECR 0270 202C EECRH 0270 2030 EESR 0270 2034 EESRH 0270 2038 SER 0270 203C SERH 0270 2040 SECR 0270 2044 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0270 2048 - 0270 204C - 0270 2050 IER 0270 2054 IERH Interrupt Enable Register High 0270 2058 IECR Interrupt Enable Clear Register 0270 205C IECRH 0270 2060 IESR 0270 2064 IESRH Copyright 2010 Texas Instruments Incorporated Reserved Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High TMS320C6674 Peripheral Information and Electrical Specifications 119 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-15 www.ti.com EDMA3 Channel Controller 0 Registers (Part 6 of 12) Hex Address Acronym 0270 2068 IPR Register Name 0270 206C IPRH Interrupt Pending Register High 0270 2070 ICR Interrupt Clear Register Interrupt Pending Register 0270 2074 ICRH Interrupt Clear Register High 0270 2078 IEVAL Interrupt Evaluate Register 0270 207C - 0270 2080 QER Reserved QDMA Event Register ADVANCE INFORMATION 0270 2084 QEER QDMA Event Enable Register 0270 2088 QEECR QDMA Event Enable Clear Register 0270 208C QEESR QDMA Event Enable Set Register 0270 2090 QSER QDMA Secondary Event Register 0270 2094 QSECR 0270 2098 - 0270 21FF - QDMA Secondary Event Clear Register 0270 2200 ER 0270 2204 ERH Event Register High 0270 2208 ECR Event Clear Register 0270 220C ECRH 0270 2210 ESR 0270 2214 ESRH Event Set Register High 0270 2218 CER Chained Event Register 0270 221C CERH 0270 2220 EER 0270 2224 EERH Event Enable Register High 0270 2228 EECR Event Enable Clear Register 0270 222C EECRH 0270 2230 EESR 0270 2234 EESRH 0270 2238 SER 0270 223C SERH Secondary Event Register High 0270 2240 SECR Secondary Event Clear Register 0270 2244 SECRH 0270 2248 - 0270 224C - Reserved Shadow Region 1 Channel Registers 120 0270 2250 IER 0270 2254 IERH 0270 2258 IECR 0270 225C IECRH 0270 2260 IESR 0270 2264 IESRH Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0270 2268 IPR 0270 226C IPRH Interrupt Pending Register Interrupt Pending Register High 0270 2270 ICR Interrupt Clear Register 0270 2274 ICRH Interrupt Clear Register High 0270 2278 IEVAL Interrupt Evaluate Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 0 Registers (Part 7 of 12) Hex Address Acronym 0270 227C - Register Name Reserved 0270 2280 QER QDMA Event Register 0270 2284 QEER QDMA Event Enable Register 0270 2288 QEECR QDMA Event Enable Clear Register 0270 228C QEESR QDMA Event Enable Set Register 0270 2290 QSER QDMA Secondary Event Register 0270 2294 QSECR QDMA Secondary Event Clear Register 0270 2298 - 0270 23FF - Reserved ADVANCE INFORMATION Table 7-15 Shadow Region 2 Channel Registers 0270 2400 ER 0270 2404 ERH Event Register Event Register High 0270 2408 ECR Event Clear Register 0270 240C ECRH Event Clear Register High 0270 2410 ESR 0270 2414 ESRH Event Set Register High 0270 2418 CER Chained Event Register 0270 241C CERH 0270 2420 EER 0270 2424 EERH 0270 2428 EECR 0270 242C EECRH 0270 2430 EESR 0270 2434 EESRH 0270 2438 SER 0270 243C SERH 0270 2440 SECR 0270 2444 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0270 2448 - 0270 244C - 0270 2450 IER Reserved 0270 2454 IERH Interrupt Enable Register High 0270 2458 IECR Interrupt Enable Clear Register 0270 245C IECRH 0270 2460 IESR 0270 2464 IESRH 0270 2468 IPR 0270 246C IPRH Interrupt Pending Register High 0270 2470 ICR Interrupt Clear Register Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0270 2474 ICRH Interrupt Clear Register High 0270 2478 IEVAL Interrupt Evaluate Register 0270 247C - 0270 2480 QER Reserved QDMA Event Register 0270 2484 QEER QDMA Event Enable Register 0270 2488 QEECR QDMA Event Enable Clear Register 0270 248C QEESR QDMA Event Enable Set Register Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 121 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-15 www.ti.com EDMA3 Channel Controller 0 Registers (Part 8 of 12) Hex Address Acronym 0270 2490 QSER Register Name QDMA Secondary Event Register 0270 2494 QSECR 0270 2498 - 0270 25FF - QDMA Secondary Event Clear Register 0270 2600 ER 0270 2604 ERH Event Register High 0270 2608 ECR Event Clear Register 0270 260C ECRH 0270 2610 ESR 0270 2614 ESRH Event Set Register High 0270 2618 CER Chained Event Register 0270 261C CERH 0270 2620 EER 0270 2624 EERH Event Enable Register High 0270 2628 EECR Event Enable Clear Register 0270 262C EECRH 0270 2630 EESR 0270 2634 EESRH 0270 2638 SER 0270 263C SERH Secondary Event Register High 0270 2640 SECR Secondary Event Clear Register 0270 2644 SECRH 0270 2648 - 0270 264C - Reserved Shadow Region 3 Channel Registers ADVANCE INFORMATION 0270 2650 IER 0270 2654 IERH 0270 2658 IECR 0270 265C IECRH 0270 2660 IESR 0270 2664 IESRH Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0270 2668 IPR 0270 266C IPRH Interrupt Pending Register Interrupt Pending Register High 0270 2670 ICR Interrupt Clear Register 0270 2674 ICRH 0270 2678 IEVAL 0270 267C - Interrupt Clear Register High Interrupt Evaluate Register Reserved 0270 2680 QER QDMA Event Register 0270 2684 QEER QDMA Event Enable Register 0270 2688 QEECR QDMA Event Enable Clear Register 0270 268C QEESR QDMA Event Enable Set Register 0270 2690 QSER QDMA Secondary Event Register 0270 2694 QSECR QDMA Secondary Event Clear Register 0270 2698 - 0270 27FF - Reserved Shadow Region 4 Channel Registers 0270 2800 122 ER Event Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 0 Registers (Part 9 of 12) Hex Address Acronym 0270 2804 ERH Event Register High Register Name 0270 2808 ECR Event Clear Register 0270 280C ECRH Event Clear Register High 0270 2810 ESR 0270 2814 ESRH Event Set Register High 0270 2818 CER Chained Event Register 0270 281C CERH 0270 2820 EER 0270 2824 EERH 0270 2828 EECR 0270 282C EECRH 0270 2830 EESR 0270 2834 EESRH 0270 2838 SER 0270 283C SERH 0270 2840 SECR 0270 2844 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0270 2848 - 0270 284C - 0270 2850 IER 0270 2854 IERH Interrupt Enable Register High 0270 2858 IECR Interrupt Enable Clear Register 0270 285C IECRH 0270 2860 IESR 0270 2864 IESRH 0270 2868 IPR 0270 286C IPRH Interrupt Pending Register High 0270 2870 ICR Interrupt Clear Register Reserved Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0270 2874 ICRH Interrupt Clear Register High 0270 2878 IEVAL Interrupt Evaluate Register 0270 287C - 0270 2880 QER ADVANCE INFORMATION Table 7-15 Reserved QDMA Event Register 0270 2884 QEER QDMA Event Enable Register 0270 2888 QEECR QDMA Event Enable Clear Register 0270 288C QEESR QDMA Event Enable Set Register 0270 2890 QSER QDMA Secondary Event Register 0270 2894 QSECR 0270 2898 - 0270 29FF - QDMA Secondary Event Clear Register 0270 2A00 ER 0270 2A04 ERH Event Register High 0270 2A08 ECR Event Clear Register 0270 2A0C ECRH 0270 2A10 ESR 0270 2A14 ESRH Reserved Shadow Region 5 Channel Registers Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Event Set Register High TMS320C6674 Peripheral Information and Electrical Specifications 123 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-15 www.ti.com EDMA3 Channel Controller 0 Registers (Part 10 of 12) ADVANCE INFORMATION Hex Address Acronym 0270 2A18 CER 0270 2A1C CERH 0270 2A20 EER 0270 2A24 EERH Event Enable Register High 0270 2A28 EECR Event Enable Clear Register 0270 2A2C EECRH 0270 2A30 EESR 0270 2A34 EESRH 0270 2A38 SER 0270 2A3C SERH Secondary Event Register High 0270 2A40 SECR Secondary Event Clear Register 0270 2A44 SECRH 0270 2A48 - 0270 2A4C - 0270 2A50 IER 0270 2A54 IERH 0270 2A58 IECR 0270 2A5C IECRH 0270 2A60 IESR 0270 2A64 IESRH Register Name Chained Event Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0270 2A68 IPR 0270 2A6C IPRH Interrupt Pending Register Interrupt Pending Register High 0270 2A70 ICR Interrupt Clear Register 0270 2A74 ICRH Interrupt Clear Register High 0270 2A78 IEVAL Interrupt Evaluate Register 0270 2A7C - Reserved 0270 2A80 QER QDMA Event Register 0270 2A84 QEER QDMA Event Enable Register 0270 2A88 QEECR QDMA Event Enable Clear Register 0270 2A8C QEESR QDMA Event Enable Set Register 0270 2A90 QSER QDMA Secondary Event Register 0270 2A94 QSECR QDMA Secondary Event Clear Register 0270 2A98 - 0270 2BFF - Reserved Shadow Region 6 Channel Registers 124 0270 2C00 ER 0270 2C04 ERH Event Register Event Register High 0270 2C08 ECR Event Clear Register 0270 2C0C ECRH Event Clear Register High 0270 2C10 ESR 0270 2C14 ESRH Event Set Register High Event Set Register 0270 2C18 CER Chained Event Register 0270 2C1C CERH Chained Event Register High 0270 2C20 EER 0270 2C24 EERH Event Enable Register Event Enable Register High 0270 2C28 EECR Event Enable Clear Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 0 Registers (Part 11 of 12) Hex Address Acronym 0270 2C2C EECRH 0270 2C30 EESR 0270 2C34 EESRH 0270 2C38 SER 0270 2C3C SERH 0270 2C40 SECR 0270 2C44 SECRH Register Name Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0270 2C48 - 0270 2C4C - 0270 2C50 IER Reserved 0270 2C54 IERH Interrupt Enable Register High 0270 2C58 IECR Interrupt Enable Clear Register 0270 2C5C IECRH 0270 2C60 IESR 0270 2C64 IESRH 0270 2C68 IPR 0270 2C6C IPRH Interrupt Pending Register High 0270 2C70 ICR Interrupt Clear Register Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0270 2C74 ICRH Interrupt Clear Register High 0270 2C78 IEVAL Interrupt Evaluate Register 0270 2C7C - 0270 2C80 QER ADVANCE INFORMATION Table 7-15 Reserved QDMA Event Register 0270 2C84 QEER QDMA Event Enable Register 0270 2C88 QEECR QDMA Event Enable Clear Register 0270 2C8C QEESR QDMA Event Enable Set Register 0270 2C90 QSER QDMA Secondary Event Register 0270 2C94 QSECR 0270 2C98 - 0270 2DFF - QDMA Secondary Event Clear Register 0270 2E00 ER 0270 2E04 ERH Event Register High 0270 2E08 ECR Event Clear Register 0270 2E0C ECRH 0270 2E10 ESR 0270 2E14 ESRH Event Set Register High 0270 2E18 CER Chained Event Register 0270 2E1C CERH 0270 2E20 EER 0270 2E24 EERH Event Enable Register High 0270 2E28 EECR Event Enable Clear Register 0270 2E2C EECRH 0270 2E30 EESR 0270 2E34 EESRH 0270 2E38 SER 0270 2E3C SERH Reserved Shadow Region 7 Channel Registers Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High TMS320C6674 Peripheral Information and Electrical Specifications 125 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-15 www.ti.com EDMA3 Channel Controller 0 Registers (Part 12 of 12) Hex Address Acronym 0270 2E40 SECR 0270 2E44 SECRH 0270 2E48 - 0270 2E4C - 0270 2E50 IER 0270 2E54 IERH 0270 2E58 IECR 0270 2E5C IECRH ADVANCE INFORMATION 0270 2E60 IESR 0270 2E64 IESRH Register Name Secondary Event Clear Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0270 2E68 IPR 0270 2E6C IPRH Interrupt Pending Register Interrupt Pending Register High 0270 2E70 ICR Interrupt Clear Register 0270 2E74 ICRH Interrupt Clear Register High 0270 2E78 IEVAL Interrupt Evaluate Register 0270 2E7C - Reserved 0270 2E80 QER QDMA Event Register 0270 2E84 QEER QDMA Event Enable Register 0270 2E88 QEECR QDMA Event Enable Clear Register 0270 2E8C QEESR QDMA Event Enable Set Register 0270 2E90 QSER QDMA Secondary Event Register 0270 2E94 QSECR QDMA Secondary Event Clear Register 0270 2E98 - 0270 2FFF - Reserved End of Table 7-15 Table 7-16 EDMA3 Channel Controller 1 Registers (Part 1 of 14) Hex Address 126 Acronym 0272 0000 PID 0272 0004 CCCFG Register Name Peripheral ID Register EDMA3CC Configuration Register 0272 0008 - 0272 00FC - 0272 0100 DCHMAP0 DMA Channel 0 Mapping Register Reserved 0272 0104 DCHMAP1 DMA Channel 1 Mapping Register 0272 0108 DCHMAP2 DMA Channel 2 Mapping Register 0272 010C DCHMAP3 DMA Channel 3 Mapping Register 0272 0110 DCHMAP4 DMA Channel 4 Mapping Register 0272 0114 DCHMAP5 DMA Channel 5 Mapping Register 0272 0118 DCHMAP6 DMA Channel 6 Mapping Register 0272 011C DCHMAP7 DMA Channel 7 Mapping Register 0272 0120 DCHMAP8 DMA Channel 8 Mapping Register 0272 0124 DCHMAP9 DMA Channel 9 Mapping Register 0272 0128 DCHMAP10 DMA Channel 10 Mapping Register 0272 012C DCHMAP11 DMA Channel 11 Mapping Register 0272 0130 DCHMAP12 DMA Channel 12 Mapping Register 0272 0134 DCHMAP13 DMA Channel 13 Mapping Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 2 of 14) Hex Address Acronym 0272 0138 DCHMAP14 DMA Channel 14 Mapping Register Register Name 0272 013C DCHMAP15 DMA Channel 15 Mapping Register 0272 0140 DCHMAP16 DMA Channel 16 Mapping Register 0272 0144 DCHMAP17 DMA Channel 17 Mapping Register 0272 0148 DCHMAP18 DMA Channel 18 Mapping Register 0272 014C DCHMAP19 DMA Channel 19 Mapping Register 0272 0150 DCHMAP20 DMA Channel 20 Mapping Register 0272 0154 DCHMAP21 DMA Channel 21 Mapping Register 0272 0158 DCHMAP22 DMA Channel 22 Mapping Register 0272 015C DCHMAP23 DMA Channel 23 Mapping Register 0272 0160 DCHMAP24 DMA Channel 24 Mapping Register 0272 0164 DCHMAP25 DMA Channel 25 Mapping Register 0272 0168 DCHMAP26 DMA Channel 26 Mapping Register 0272 016C DCHMAP27 DMA Channel 27 Mapping Register 0272 0170 DCHMAP28 DMA Channel 28 Mapping Register 0272 0174 DCHMAP29 DMA Channel 29 Mapping Register 0272 0178 DCHMAP30 DMA Channel 30 Mapping Register 0272 017C DCHMAP31 DMA Channel 31 Mapping Register 0272 0180 DCHMAP32 DMA Channel 32 Mapping Register 0272 0184 DCHMAP33 DMA Channel 33 Mapping Register 0272 0188 DCHMAP34 DMA Channel 34 Mapping Register 0272 018C DCHMAP35 DMA Channel 35 Mapping Register 0272 0190 DCHMAP36 DMA Channel 36 Mapping Register 0272 0194 DCHMAP37 DMA Channel 37 Mapping Register 0272 0198 DCHMAP38 DMA Channel 38 Mapping Register 0272 019C DCHMAP39 DMA Channel 39 Mapping Register 0272 01A0 DCHMAP40 DMA Channel 40 Mapping Register 0272 01A4 DCHMAP41 DMA Channel 41 Mapping Register 0272 01A8 DCHMAP42 DMA Channel 42 Mapping Register 0272 01AC DCHMAP43 DMA Channel 43 Mapping Register 0272 01B0 DCHMAP44 DMA Channel 44 Mapping Register 0272 01B4 DCHMAP45 DMA Channel 45 Mapping Register 0272 01B8 DCHMAP46 DMA Channel 46 Mapping Register 0272 01BC DCHMAP47 DMA Channel 47 Mapping Register 0272 01C0 DCHMAP48 DMA Channel 48 Mapping Register 0272 01C4 DCHMAP49 DMA Channel 49 Mapping Register 0272 01C8 DCHMAP50 DMA Channel 50 Mapping Register 0272 01CC DCHMAP51 DMA Channel 51 Mapping Register 0272 01D0 DCHMAP52 DMA Channel 52 Mapping Register 0272 01D4 DCHMAP53 DMA Channel 53 Mapping Register 0272 01D8 DCHMAP54 DMA Channel 54 Mapping Register 0272 01DC DCHMAP55 DMA Channel 55 Mapping Register 0272 01E0 DCHMAP56 DMA Channel 56 Mapping Register 0272 01E4 DCHMAP57 DMA Channel 57 Mapping Register Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications ADVANCE INFORMATION Table 7-16 127 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-16 ADVANCE INFORMATION 128 www.ti.com EDMA3 Channel Controller 1 Registers (Part 3 of 14) Hex Address Acronym 0272 01E8 DCHMAP58 DMA Channel 58 Mapping Register Register Name 0272 01EC DCHMAP59 DMA Channel 59 Mapping Register 0272 01F0 DCHMAP60 DMA Channel 60 Mapping Register 0272 01F4 DCHMAP61 DMA Channel 61 Mapping Register 0272 01F8 DCHMAP62 DMA Channel 62 Mapping Register 0272 01FC DCHMAP63 DMA Channel 63 Mapping Register 0272 0200 QCHMAP0 QDMA Channel 0 Mapping Register 0272 0204 QCHMAP1 QDMA Channel 1 Mapping Register 0272 0208 QCHMAP2 QDMA Channel 2 Mapping Register 0272 020C QCHMAP3 QDMA Channel 3 Mapping Register 0272 0210 QCHMAP4 QDMA Channel 4 Mapping Register 0272 0214 QCHMAP5 QDMA Channel 5 Mapping Register 0272 0218 QCHMAP6 QDMA Channel 6 Mapping Register QDMA Channel 7 Mapping Register 0272 021C QCHMAP7 0272 0220 - 0272 023C - 0272 0240 DMAQNUM0 DMA Queue Number Register 0 0272 0244 DMAQNUM1 DMA Queue Number Register 1 Reserved 0272 0248 DMAQNUM2 DMA Queue Number Register 2 0272 024C DMAQNUM3 DMA Queue Number Register 3 0272 0250 DMAQNUM4 DMA Queue Number Register 4 0272 0254 DMAQNUM5 DMA Queue Number Register 5 0272 0258 DMAQNUM6 DMA Queue Number Register 6 0272 025C DMAQNUM7 DMA Queue Number Register 7 0272 0260 QDMAQNUM 0272 0264 - 0272 027C - 0272 0280 QUETCMAP 0272 0284 QUEPRI QDMA Queue Number Register Reserved Queue to TC Mapping Register Queue Priority Register 0272 0288 - 0272 02FC - 0272 0300 EMR 0272 0304 EMRH Event Missed Register High 0272 0308 EMCR Event Missed Clear Register 0272 030C EMCRH Event Missed Clear Register High 0272 0310 QEMR QDMA Event Missed Register 0272 0314 QEMCR QDMA Event Missed Clear Register 0272 0318 CCERR EDMA3CC Error Register 0272 031C CCERRCLR 0272 0320 EEVAL 0272 0324 - 0272 033C - 0272 0340 DRAE0 0272 0344 DRAEH0 0272 0348 DRAE1 0272 034C DRAEH1 0272 0350 DRAE2 0272 0354 DRAEH2 Reserved Event Missed Register EDMA3CC Error Clear Register Error Evaluate Register Reserved DMA Region Access Enable Register for Region 0 DMA Region Access Enable Register High for Region 0 DMA Region Access Enable Register for Region 1 DMA Region Access Enable Register High for Region 1 DMA Region Access Enable Register for Region 2 DMA Region Access Enable Register High for Region 2 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 4 of 14) Hex Address Acronym 0272 0358 DRAE3 Register Name 0272 035C DRAEH3 0272 0360 DRAE4 0272 0364 DRAEH4 0272 0368 DRAE5 0272 036C DRAEH5 0272 0370 DRAE6 0272 0374 DRAEH6 0272 0378 DRAE7 0272 037C DRAEH7 0272 0380 QRAE0 QDMA Region Access Enable Register for Region 0 0272 0384 QRAE1 QDMA Region Access Enable Register for Region 1 0272 0388 QRAE2 QDMA Region Access Enable Register for Region 2 0272 038C QRAE3 QDMA Region Access Enable Register for Region 3 0272 0390 QRAE4 QDMA Region Access Enable Register for Region 4 0272 0394 QRAE5 QDMA Region Access Enable Register for Region 5 0272 0398 QRAE6 QDMA Region Access Enable Register for Region 6 0272 039C QRAE7 0272 0400 Q0E0 Event Queue 0 Entry Register 0 0272 0404 Q0E1 Event Queue 0 Entry Register 1 0272 0408 Q0E2 Event Queue 0 Entry Register 2 0272 040C Q0E3 Event Queue 0 Entry Register 3 0272 0410 Q0E4 Event Queue 0 Entry Register 4 0272 0414 Q0E5 Event Queue 0 Entry Register 5 0272 0418 Q0E6 Event Queue 0 Entry Register 6 0272 041C Q0E7 Event Queue 0 Entry Register 7 0272 0420 Q0E8 Event Queue 0 Entry Register 8 DMA Region Access Enable Register for Region 3 DMA Region Access Enable Register High for Region 3 DMA Region Access Enable Register for Region 4 DMA Region Access Enable Register High for Region 4 DMA Region Access Enable Register for Region 5 DMA Region Access Enable Register High for Region 5 DMA Region Access Enable Register for Region 6 DMA Region Access Enable Register High for Region 6 DMA Region Access Enable Register for Region 7 DMA Region Access Enable Register High for Region 7 QDMA Region Access Enable Register for Region 7 0272 0424 Q0E9 Event Queue 0 Entry Register 9 0272 0428 Q0E10 Event Queue 0 Entry Register 10 0272 042C Q0E11 Event Queue 0 Entry Register 11 0272 0430 Q0E12 Event Queue 0 Entry Register 12 0272 0434 Q0E13 Event Queue 0 Entry Register 13 0272 0438 Q0E14 Event Queue 0 Entry Register 14 0272 043C Q0E15 Event Queue 0 Entry Register 15 0272 0440 Q1E0 Event Queue 1 Entry Register 0 0272 0444 Q1E1 Event Queue 1 Entry Register 1 0272 0448 Q1E2 Event Queue 1 Entry Register 2 0272 044C Q1E3 Event Queue 1 Entry Register 3 0272 0450 Q1E4 Event Queue 1 Entry Register 4 0272 0454 Q1E5 Event Queue 1 Entry Register 5 0272 0458 Q1E6 Event Queue 1 Entry Register 6 0272 045C Q1E7 Event Queue 1 Entry Register 7 0272 0460 Q1E8 Event Queue 1 Entry Register 8 0272 0464 Q1E9 Event Queue 1 Entry Register 9 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 7-16 TMS320C6674 Peripheral Information and Electrical Specifications 129 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-16 ADVANCE INFORMATION 130 www.ti.com EDMA3 Channel Controller 1 Registers (Part 5 of 14) Hex Address Acronym 0272 0468 Q1E10 Event Queue 1 Entry Register 10 Register Name 0272 046C Q1E11 Event Queue 1 Entry Register 11 0272 0470 Q1E12 Event Queue 1 Entry Register 12 0272 0474 Q1E13 Event Queue 1 Entry Register 13 0272 0478 Q1E14 Event Queue 1 Entry Register 14 0272 047C Q1E15 Event Queue 1 Entry Register 15 0272 0480 Q2E0 Event Queue 2 Entry Register 0 0272 0484 Q2E1 Event Queue 2 Entry Register 1 0272 0488 Q2E2 Event Queue 2 Entry Register 2 0272 048C Q2E3 Event Queue 2 Entry Register 3 0272 0490 Q2E4 Event Queue 2 Entry Register 4 0272 0494 Q2E5 Event Queue 2 Entry Register 5 0272 0498 Q2E6 Event Queue 2 Entry Register 6 0272 049C Q2E7 Event Queue 2 Entry Register 7 0272 04A0 Q2E8 Event Queue 2 Entry Register 8 0272 04A4 Q2E9 Event Queue 2 Entry Register 9 0272 04A8 Q2E10 Event Queue 2 Entry Register 10 0272 04AC Q2E11 Event Queue 2 Entry Register 11 0272 04B0 Q2E12 Event Queue 2 Entry Register 12 0272 04B4 Q2E13 Event Queue 2 Entry Register 13 0272 04B8 Q2E14 Event Queue 2 Entry Register 14 0272 04BC Q2E15 Event Queue 2 Entry Register 15 0272 04C0 Q3E0 Event Queue 3 Entry Register 0 0272 04C4 Q3E1 Event Queue 3 Entry Register 1 0272 04C8 Q3E2 Event Queue 3 Entry Register 2 0272 04CC Q3E3 Event Queue 3 Entry Register 3 0272 04D0 Q3E4 Event Queue 3 Entry Register 4 0272 04D4 Q3E5 Event Queue 3 Entry Register 5 0272 04D8 Q3E6 Event Queue 3 Entry Register 6 0272 04DC Q3E7 Event Queue 3 Entry Register 7 0272 04E0 Q3E8 Event Queue 3 Entry Register 8 0272 04E4 Q3E9 Event Queue 3 Entry Register 9 0272 04E8 Q3E10 Event Queue 3 Entry Register 10 0272 04EC Q3E11 Event Queue 3 Entry Register 11 0272 04F0 Q3E12 Event Queue 3 Entry Register 12 0272 04F4 Q3E13 Event Queue 3 Entry Register 13 0272 04F8 Q3E14 Event Queue 3 Entry Register 14 Event Queue 3 Entry Register 15 0272 04FC Q3E15 0272 0500 - 0272 05FC - 0272 0600 QSTAT0 Queue Status Register 0 0272 0604 QSTAT1 Queue Status Register 1 Reserved 0272 0608 QSTAT2 Queue Status Register 2 0272 060C QSTAT3 Queue Status Register 3 0272 0610 - 0272 061C - Reserved TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 6 of 14) Hex Address Acronym 0272 0620 QWMTHRA Queue Watermark Threshold A Register Queue Watermark Threshold B Register 0272 0624 QWMTHRB 0272 0628 - 0272 063C - 0272 0640 CCSTAT 0272 0644 - 0272 06FC - 0272 0700 - 0272 07FC - 0272 0800 MPFAR Register Name Reserved EDMA3CC Status Register Reserved Reserved Memory Protection Fault Address Register 0272 0804 MPFSR Memory Protection Fault Status Register 0272 0808 MPFCR Memory Protection Fault Command Register 0272 080C MPPAG Memory Protection Page Attribute Register G 0272 0810 MPPA0 Memory Protection Page Attribute Register 0 0272 0814 MPPA1 Memory Protection Page Attribute Register 1 0272 0818 MPPA2 Memory Protection Page Attribute Register 2 0272 081C MPPA3 Memory Protection Page Attribute Register 3 0272 0820 MPPA4 Memory Protection Page Attribute Register 4 0272 0824 MPPA5 Memory Protection Page Attribute Register 5 0272 0828 MPPA6 Memory Protection Page Attribute Register 6 0272 082C MPPA7 Memory Protection Page Attribute Register 7 0272 082C - 0272 0FFC - Reserved 0272 1000 ER 0272 1004 ERH Event Register High 0272 1008 ECR Event Clear Register 0272 100C ECRH Event Register Event Clear Register High 0272 1010 ESR 0272 1014 ESRH Event Set Register High 0272 1018 CER Chained Event Register 0272 101C CERH 0272 1020 EER 0272 1024 EERH 0272 1028 EECR 0272 102C EECRH 0272 1030 EESR 0272 1034 EESRH 0272 1038 SER 0272 103C SERH 0272 1040 SECR 0272 1044 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0272 1048 - 0272 104C - 0272 1050 IER 0272 1054 IERH Interrupt Enable High Register 0272 1058 IECR Interrupt Enable Clear Register 0272 105C IECRH 0272 1060 IESR 0272 1064 IESRH Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 7-16 Reserved Interrupt Enable Register Interrupt Enable Clear High Register Interrupt Enable Set Register Interrupt Enable Set High Register TMS320C6674 Peripheral Information and Electrical Specifications 131 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-16 www.ti.com EDMA3 Channel Controller 1 Registers (Part 7 of 14) Hex Address Acronym 0272 1068 IPR Register Name 0272 106C IPRH Interrupt Pending High Register 0272 1070 ICR Interrupt Clear Register Interrupt Pending Register 0272 1074 ICRH Interrupt Clear High Register 0272 1078 IEVAL Interrupt Evaluate Register 0272 107C - 0272 1080 QER Reserved QDMA Event Register ADVANCE INFORMATION 0272 1084 QEER QDMA Event Enable Register 0272 1088 QEECR QDMA Event Enable Clear Register 0272 108C QEESR QDMA Event Enable Set Register 0272 1090 QSER QDMA Secondary Event Register 0272 1094 QSECR 0272 1098 - 0272 1FFF - QDMA Secondary Event Clear Register 0272 2000 ER 0272 2004 ERH Event Register High 0272 2008 ECR Event Clear Register 0272 200C ECRH 0272 2010 ESR 0272 2014 ESRH Event Set Register High 0272 2018 CER Chained Event Register 0272 201C CERH 0272 2020 EER 0272 2024 EERH Event Enable Register High 0272 2028 EECR Event Enable Clear Register 0272 202C EECRH 0272 2030 EESR 0272 2034 EESRH 0272 2038 SER 0272 203C SERH Secondary Event Register High 0272 2040 SECR Secondary Event Clear Register 0272 2044 SECRH 0272 2048 - 0272 204C - Reserved Shadow Region 0 Channel Registers 132 0272 2050 IER 0272 2054 IERH 0272 2058 IECR 0272 205C IECRH 0272 2060 IESR 0272 2064 IESRH Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0272 2068 IPR 0272 206C IPRH Interrupt Pending Register Interrupt Pending Register High 0272 2070 ICR Interrupt Clear Register 0272 2074 ICRH Interrupt Clear Register High 0272 2078 IEVAL Interrupt Evaluate Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 8 of 14) Hex Address Acronym 0272 207C - Register Name Reserved 0272 2080 QER QDMA Event Register 0272 2084 QEER QDMA Event Enable Register 0272 2088 QEECR QDMA Event Enable Clear Register 0272 208C QEESR QDMA Event Enable Set Register 0272 2090 QSER QDMA Secondary Event Register 0272 2094 QSECR QDMA Secondary Event Clear Register 0272 2098 - 0272 21FF - Reserved ADVANCE INFORMATION Table 7-16 Shadow Region 1 Channel Registers 0272 2200 ER 0272 2204 ERH Event Register Event Register High 0272 2208 ECR Event Clear Register 0272 220C ECRH Event Clear Register High 0272 2210 ESR 0272 2214 ESRH Event Set Register High 0272 2218 CER Chained Event Register 0272 221C CERH 0272 2220 EER 0272 2224 EERH 0272 2228 EECR 0272 222C EECRH 0272 2230 EESR 0272 2234 EESRH 0272 2238 SER 0272 223C SERH 0272 2240 SECR 0272 2244 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0272 2248 - 0272 224C - 0272 2250 IER Reserved 0272 2254 IERH Interrupt Enable Register High 0272 2258 IECR Interrupt Enable Clear Register 0272 225C IECRH 0272 2260 IESR 0272 2264 IESRH 0272 2268 IPR 0272 226C IPRH Interrupt Pending Register High 0272 2270 ICR Interrupt Clear Register Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0272 2274 ICRH Interrupt Clear Register High 0272 2278 IEVAL Interrupt Evaluate Register 0272 227C - 0272 2280 QER Reserved QDMA Event Register 0272 2284 QEER QDMA Event Enable Register 0272 2288 QEECR QDMA Event Enable Clear Register 0272 228C QEESR QDMA Event Enable Set Register Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 133 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-16 www.ti.com EDMA3 Channel Controller 1 Registers (Part 9 of 14) Hex Address Acronym 0272 2290 QSER Register Name QDMA Secondary Event Register 0272 2294 QSECR 0272 2298 - 0272 23FF - QDMA Secondary Event Clear Register 0272 2400 ER 0272 2404 ERH Event Register High 0272 2408 ECR Event Clear Register 0272 240C ECRH 0272 2410 ESR 0272 2414 ESRH Event Set Register High 0272 2418 CER Chained Event Register 0272 241C CERH 0272 2420 EER 0272 2424 EERH Event Enable Register High 0272 2428 EECR Event Enable Clear Register 0272 242C EECRH 0272 2430 EESR 0272 2434 EESRH 0272 2438 SER 0272 243C SERH Secondary Event Register High 0272 2440 SECR Secondary Event Clear Register 0272 2444 SECRH 0272 2448 - 0272 244C - Reserved Shadow Region 2 Channel Registers ADVANCE INFORMATION 0272 2450 IER 0272 2454 IERH 0272 2458 IECR 0272 245C IECRH 0272 2460 IESR 0272 2464 IESRH Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0272 2468 IPR 0272 246C IPRH Interrupt Pending Register Interrupt Pending Register High 0272 2470 ICR Interrupt Clear Register 0272 2474 ICRH 0272 2478 IEVAL 0272 247C - Interrupt Clear Register High Interrupt Evaluate Register Reserved 0272 2480 QER QDMA Event Register 0272 2484 QEER QDMA Event Enable Register 0272 2488 QEECR QDMA Event Enable Clear Register 0272 248C QEESR QDMA Event Enable Set Register 0272 2490 QSER QDMA Secondary Event Register 0272 2494 QSECR QDMA Secondary Event Clear Register 0272 2498 - 0272 25FF - Reserved Shadow Region 3 Channel Registers 0272 2600 134 ER Event Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 10 of 14) Hex Address Acronym 0272 2604 ERH Event Register High Register Name 0272 2608 ECR Event Clear Register 0272 260C ECRH Event Clear Register High 0272 2610 ESR 0272 2614 ESRH Event Set Register High 0272 2618 CER Chained Event Register 0272 261C CERH 0272 2620 EER 0272 2624 EERH 0272 2628 EECR 0272 262C EECRH 0272 2630 EESR 0272 2634 EESRH 0272 2638 SER 0272 263C SERH 0272 2640 SECR 0272 2644 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0272 2648 - 0272 264C - 0272 2650 IER 0272 2654 IERH Interrupt Enable Register High 0272 2658 IECR Interrupt Enable Clear Register 0272 265C IECRH 0272 2660 IESR 0272 2664 IESRH 0272 2668 IPR 0272 266C IPRH Interrupt Pending Register High 0272 2670 ICR Interrupt Clear Register Reserved Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0272 2674 ICRH Interrupt Clear Register High 0272 2678 IEVAL Interrupt Evaluate Register 0272 267C - 0272 2680 QER ADVANCE INFORMATION Table 7-16 Reserved QDMA Event Register 0272 2684 QEER QDMA Event Enable Register 0272 2688 QEECR QDMA Event Enable Clear Register 0272 268C QEESR QDMA Event Enable Set Register 0272 2690 QSER QDMA Secondary Event Register 0272 2694 QSECR 0272 2698 - 0272 27FF - QDMA Secondary Event Clear Register 0272 2800 ER 0272 2804 ERH Event Register High 0272 2808 ECR Event Clear Register 0272 280C ECRH 0272 2810 ESR 0272 2814 ESRH Reserved Shadow Region 4 Channel Registers Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Event Set Register High TMS320C6674 Peripheral Information and Electrical Specifications 135 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-16 www.ti.com EDMA3 Channel Controller 1 Registers (Part 11 of 14) ADVANCE INFORMATION Hex Address Acronym 0272 2818 CER 0272 281C CERH 0272 2820 EER 0272 2824 EERH Event Enable Register High 0272 2828 EECR Event Enable Clear Register 0272 282C EECRH 0272 2830 EESR 0272 2834 EESRH 0272 2838 SER 0272 283C SERH Secondary Event Register High 0272 2840 SECR Secondary Event Clear Register 0272 2844 SECRH 0272 2848 - 0272 284C - 0272 2850 IER 0272 2854 IERH 0272 2858 IECR 0272 285C IECRH 0272 2860 IESR 0272 2864 IESRH Register Name Chained Event Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0272 2868 IPR 0272 286C IPRH Interrupt Pending Register Interrupt Pending Register High 0272 2870 ICR Interrupt Clear Register 0272 2874 ICRH 0272 2878 IEVAL 0272 287C - Interrupt Clear Register High Interrupt Evaluate Register Reserved 0272 2880 QER QDMA Event Register 0272 2884 QEER QDMA Event Enable Register 0272 2888 QEECR QDMA Event Enable Clear Register 0272 288C QEESR QDMA Event Enable Set Register 0272 2890 QSER QDMA Secondary Event Register 0272 2894 QSECR QDMA Secondary Event Clear Register 0272 2898 - 0272 29FF - Reserved Shadow Region 5 Channel Registers 136 0272 2A00 ER 0272 2A04 ERH Event Register Event Register High 0272 2A08 ECR Event Clear Register 0272 2A0C ECRH Event Clear Register High 0272 2A10 ESR 0272 2A14 ESRH Event Set Register High Event Set Register 0272 2A18 CER Chained Event Register 0272 2A1C CERH Chained Event Register High 0272 2A20 EER 0272 2A24 EERH Event Enable Register Event Enable Register High 0272 2A28 EECR Event Enable Clear Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 12 of 14) Hex Address Acronym 0272 2A2C EECRH 0272 2A30 EESR 0272 2A34 EESRH 0272 2A38 SER 0272 2A3C SERH 0272 2A40 SECR 0272 2A44 SECRH Register Name Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0272 2A48 - 0272 2A4C - 0272 2A50 IER Reserved 0272 2A54 IERH Interrupt Enable Register High 0272 2A58 IECR Interrupt Enable Clear Register 0272 2A5C IECRH 0272 2A60 IESR 0272 2A64 IESRH 0272 2A68 IPR 0272 2A6C IPRH Interrupt Pending Register High 0272 2A70 ICR Interrupt Clear Register Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0272 2A74 ICRH Interrupt Clear Register High 0272 2A78 IEVAL Interrupt Evaluate Register 0272 2A7C - 0272 2A80 QER ADVANCE INFORMATION Table 7-16 Reserved QDMA Event Register 0272 2A84 QEER QDMA Event Enable Register 0272 2A88 QEECR QDMA Event Enable Clear Register 0272 2A8C QEESR QDMA Event Enable Set Register 0272 2A90 QSER QDMA Secondary Event Register 0272 2A94 QSECR 0272 2A98 - 0272 2BFF - QDMA Secondary Event Clear Register 0272 2C00 ER 0272 2C04 ERH Event Register High 0272 2C08 ECR Event Clear Register 0272 2C0C ECRH 0272 2C10 ESR 0272 2C14 ESRH Event Set Register High 0272 2C18 CER Chained Event Register 0272 2C1C CERH 0272 2C20 EER 0272 2C24 EERH Event Enable Register High 0272 2C28 EECR Event Enable Clear Register 0272 2C2C EECRH 0272 2C30 EESR 0272 2C34 EESRH 0272 2C38 SER 0272 2C3C SERH Reserved Shadow Region 6 Channel Registers Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High TMS320C6674 Peripheral Information and Electrical Specifications 137 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-16 www.ti.com EDMA3 Channel Controller 1 Registers (Part 13 of 14) Hex Address Acronym 0272 2C40 SECR 0272 2C44 SECRH 0272 2C48 - 0272 2C4C - 0272 2C50 IER 0272 2C54 IERH 0272 2C58 IECR 0272 2C5C IECRH ADVANCE INFORMATION 0272 2C60 IESR 0272 2C64 IESRH Register Name Secondary Event Clear Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0272 2C68 IPR 0272 2C6C IPRH Interrupt Pending Register Interrupt Pending Register High 0272 2C70 ICR Interrupt Clear Register 0272 2C74 ICRH 0272 2C78 IEVAL 0272 2C7C - Interrupt Clear Register High Interrupt Evaluate Register Reserved 0272 2C80 QER QDMA Event Register 0272 2C84 QEER QDMA Event Enable Register 0272 2C88 QEECR QDMA Event Enable Clear Register 0272 2C8C QEESR QDMA Event Enable Set Register 0272 2C90 QSER QDMA Secondary Event Register 0272 2C94 QSECR QDMA Secondary Event Clear Register 0272 2C98 - 0272 2DFF - Reserved Shadow Region 7 Channel Registers 138 0272 2E00 ER 0272 2E04 ERH Event Register Event Register High 0272 2E08 ECR Event Clear Register 0272 2E0C ECRH Event Clear Register High 0272 2E10 ESR 0272 2E14 ESRH Event Set Register High 0272 2E18 CER Chained Event Register 0272 2E1C CERH 0272 2E20 EER 0272 2E24 EERH 0272 2E28 EECR 0272 2E2C EECRH 0272 2E30 EESR 0272 2E34 EESRH 0272 2E38 SER 0272 2E3C SERH 0272 2E40 SECR 0272 2E44 SECRH 0272 2E48 - 0272 2E4C - 0272 2E50 IER 0272 2E54 IERH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 1 Registers (Part 14 of 14) Hex Address Acronym 0272 2E58 IECR Register Name 0272 2E5C IECRH 0272 2E60 IESR 0272 2E64 IESRH 0272 2E68 IPR 0272 2E6C IPRH Interrupt Pending Register High 0272 2E70 ICR Interrupt Clear Register Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0272 2E74 ICRH Interrupt Clear Register High 0272 2E78 IEVAL Interrupt Evaluate Register 0272 2E7C - 0272 2E80 QER ADVANCE INFORMATION Table 7-16 Reserved QDMA Event Register 0272 2E84 QEER QDMA Event Enable Register 0272 2E88 QEECR QDMA Event Enable Clear Register 0272 2E8C QEESR QDMA Event Enable Set Register 0272 2E90 QSER QDMA Secondary Event Register 0272 2E94 QSECR 0272 2E98 - 0272 2FFF - QDMA Secondary Event Clear Register Reserved End of Table 7-16 Table 7-17 EDMA3 Channel Controller 2 Registers (Part 1 of 14) Hex Address Acronym 0274 0000 PID Register Name Peripheral ID Register 0274 0004 CCCFG 0274 0008 - 0274 00FC - EDMA3CC Configuration Register 0274 0100 DCHMAP0 DMA Channel 0 Mapping Register 0274 0104 DCHMAP1 DMA Channel 1 Mapping Register Reserved 0274 0108 DCHMAP2 DMA Channel 2 Mapping Register 0274 010C DCHMAP3 DMA Channel 3 Mapping Register 0274 0110 DCHMAP4 DMA Channel 4 Mapping Register 0274 0114 DCHMAP5 DMA Channel 5 Mapping Register 0274 0118 DCHMAP6 DMA Channel 6 Mapping Register 0274 011C DCHMAP7 DMA Channel 7 Mapping Register 0274 0120 DCHMAP8 DMA Channel 8 Mapping Register 0274 0124 DCHMAP9 DMA Channel 9 Mapping Register 0274 0128 DCHMAP10 DMA Channel 10 Mapping Register 0274 012C DCHMAP11 DMA Channel 11 Mapping Register 0274 0130 DCHMAP12 DMA Channel 12 Mapping Register 0274 0134 DCHMAP13 DMA Channel 13 Mapping Register 0274 0138 DCHMAP14 DMA Channel 14 Mapping Register 0274 013C DCHMAP15 DMA Channel 15 Mapping Register 0274 0140 DCHMAP16 DMA Channel 16 Mapping Register 0274 0144 DCHMAP17 DMA Channel 17 Mapping Register 0274 0148 DCHMAP18 DMA Channel 18 Mapping Register Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 139 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 ADVANCE INFORMATION 140 www.ti.com EDMA3 Channel Controller 2 Registers (Part 2 of 14) Hex Address Acronym 0274 014C DCHMAP19 DMA Channel 19 Mapping Register Register Name 0274 0150 DCHMAP20 DMA Channel 20 Mapping Register 0274 0154 DCHMAP21 DMA Channel 21 Mapping Register 0274 0158 DCHMAP22 DMA Channel 22 Mapping Register 0274 015C DCHMAP23 DMA Channel 23 Mapping Register 0274 0160 DCHMAP24 DMA Channel 24 Mapping Register 0274 0164 DCHMAP25 DMA Channel 25 Mapping Register 0274 0168 DCHMAP26 DMA Channel 26 Mapping Register 0274 016C DCHMAP27 DMA Channel 27 Mapping Register 0274 0170 DCHMAP28 DMA Channel 28 Mapping Register 0274 0174 DCHMAP29 DMA Channel 29 Mapping Register 0274 0178 DCHMAP30 DMA Channel 30 Mapping Register 0274 017C DCHMAP31 DMA Channel 31 Mapping Register 0274 0180 DCHMAP32 DMA Channel 32 Mapping Register 0274 0184 DCHMAP33 DMA Channel 33 Mapping Register 0274 0188 DCHMAP34 DMA Channel 34 Mapping Register 0274 018C DCHMAP35 DMA Channel 35 Mapping Register 0274 0190 DCHMAP36 DMA Channel 36 Mapping Register 0274 0194 DCHMAP37 DMA Channel 37 Mapping Register 0274 0198 DCHMAP38 DMA Channel 38 Mapping Register 0274 019C DCHMAP39 DMA Channel 39 Mapping Register 0274 01A0 DCHMAP40 DMA Channel 40 Mapping Register 0274 01A4 DCHMAP41 DMA Channel 41 Mapping Register 0274 01A8 DCHMAP42 DMA Channel 42 Mapping Register 0274 01AC DCHMAP43 DMA Channel 43 Mapping Register 0274 01B0 DCHMAP44 DMA Channel 44 Mapping Register 0274 01B4 DCHMAP45 DMA Channel 45 Mapping Register 0274 01B8 DCHMAP46 DMA Channel 46 Mapping Register 0274 01BC DCHMAP47 DMA Channel 47 Mapping Register 0274 01C0 DCHMAP48 DMA Channel 48 Mapping Register 0274 01C4 DCHMAP49 DMA Channel 49 Mapping Register 0274 01C8 DCHMAP50 DMA Channel 50 Mapping Register 0274 01CC DCHMAP51 DMA Channel 51 Mapping Register 0274 01D0 DCHMAP52 DMA Channel 52 Mapping Register 0274 01D4 DCHMAP53 DMA Channel 53 Mapping Register 0274 01D8 DCHMAP54 DMA Channel 54 Mapping Register 0274 01DC DCHMAP55 DMA Channel 55 Mapping Register 0274 01E0 DCHMAP56 DMA Channel 56 Mapping Register 0274 01E4 DCHMAP57 DMA Channel 57 Mapping Register 0274 01E8 DCHMAP58 DMA Channel 58 Mapping Register 0274 01EC DCHMAP59 DMA Channel 59 Mapping Register 0274 01F0 DCHMAP60 DMA Channel 60 Mapping Register 0274 01F4 DCHMAP61 DMA Channel 61 Mapping Register 0274 01F8 DCHMAP62 DMA Channel 62 Mapping Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 2 Registers (Part 3 of 14) Hex Address Acronym 0274 01FC DCHMAP63 DMA Channel 63 Mapping Register Register Name 0274 0200 QCHMAP0 QDMA Channel 0 Mapping Register 0274 0204 QCHMAP1 QDMA Channel 1 Mapping Register 0274 0208 QCHMAP2 QDMA Channel 2 Mapping Register 0274 020C QCHMAP3 QDMA Channel 3 Mapping Register 0274 0210 QCHMAP4 QDMA Channel 4 Mapping Register 0274 0214 QCHMAP5 QDMA Channel 5 Mapping Register 0274 0218 QCHMAP6 QDMA Channel 6 Mapping Register 0274 021C QCHMAP7 QDMA Channel 7 Mapping Register 0274 0220 - 0274 023C - 0274 0240 DMAQNUM0 DMA Queue Number Register 0 0274 0244 DMAQNUM1 DMA Queue Number Register 1 0274 0248 DMAQNUM2 DMA Queue Number Register 2 0274 024C DMAQNUM3 DMA Queue Number Register 3 0274 0250 DMAQNUM4 DMA Queue Number Register 4 0274 0254 DMAQNUM5 DMA Queue Number Register 5 0274 0258 DMAQNUM6 DMA Queue Number Register 6 0274 025C DMAQNUM7 DMA Queue Number Register 7 0274 0260 QDMAQNUM QDMA Queue Number Register 0274 0264 - 0274 027C - 0274 0280 QUETCMAP 0274 0284 QUEPRI 0274 0288 - 0274 02FC - 0274 0300 EMR 0274 0304 EMRH 0274 0308 EMCR 0274 030C EMCRH Reserved Reserved Queue to TC Mapping Register Queue Priority Register Reserved Event Missed Register Event Missed Register High Event Missed Clear Register Event Missed Clear Register High 0274 0310 QEMR QDMA Event Missed Register 0274 0314 QEMCR QDMA Event Missed Clear Register EDMA3CC Error Register 0274 0318 CCERR 0274 031C CCERRCLR 0274 0320 EEVAL 0274 0324 - 0274 033C - 0274 0340 DRAE0 0274 0344 DRAEH0 0274 0348 DRAE1 0274 034C DRAEH1 0274 0350 DRAE2 0274 0354 DRAEH2 0274 0358 DRAE3 0274 035C DRAEH3 0274 0360 DRAE4 0274 0364 DRAEH4 0274 0368 DRAE5 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 7-17 EDMA3CC Error Clear Register Error Evaluate Register Reserved DMA Region Access Enable Register for Region 0 DMA Region Access Enable Register High for Region 0 DMA Region Access Enable Register for Region 1 DMA Region Access Enable Register High for Region 1 DMA Region Access Enable Register for Region 2 DMA Region Access Enable Register High for Region 2 DMA Region Access Enable Register for Region 3 DMA Region Access Enable Register High for Region 3 DMA Region Access Enable Register for Region 4 DMA Region Access Enable Register High for Region 4 DMA Region Access Enable Register for Region 5 TMS320C6674 Peripheral Information and Electrical Specifications 141 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 ADVANCE INFORMATION 142 www.ti.com EDMA3 Channel Controller 2 Registers (Part 4 of 14) Hex Address Acronym 0274 036C DRAEH5 0274 0370 DRAE6 0274 0374 DRAEH6 Register Name DMA Region Access Enable Register High for Region 5 DMA Region Access Enable Register for Region 6 DMA Region Access Enable Register High for Region 6 0274 0378 DRAE7 0274 037C DRAEH7 DMA Region Access Enable Register for Region 7 0274 0380 QRAE0 QDMA Region Access Enable Register for Region 0 0274 0384 QRAE1 QDMA Region Access Enable Register for Region 1 DMA Region Access Enable Register High for Region 7 0274 0388 QRAE2 QDMA Region Access Enable Register for Region 2 0274 038C QRAE3 QDMA Region Access Enable Register for Region 3 0274 0390 QRAE4 QDMA Region Access Enable Register for Region 4 0274 0394 QRAE5 QDMA Region Access Enable Register for Region 5 0274 0398 QRAE6 QDMA Region Access Enable Register for Region 6 0274 039C QRAE7 QDMA Region Access Enable Register for Region 7 0274 0400 Q0E0 Event Queue 0 Entry Register 0 0274 0404 Q0E1 Event Queue 0 Entry Register 1 0274 0408 Q0E2 Event Queue 0 Entry Register 2 0274 040C Q0E3 Event Queue 0 Entry Register 3 0274 0410 Q0E4 Event Queue 0 Entry Register 4 0274 0414 Q0E5 Event Queue 0 Entry Register 5 0274 0418 Q0E6 Event Queue 0 Entry Register 6 0274 041C Q0E7 Event Queue 0 Entry Register 7 0274 0420 Q0E8 Event Queue 0 Entry Register 8 0274 0424 Q0E9 Event Queue 0 Entry Register 9 0274 0428 Q0E10 Event Queue 0 Entry Register 10 0274 042C Q0E11 Event Queue 0 Entry Register 11 0274 0430 Q0E12 Event Queue 0 Entry Register 12 0274 0434 Q0E13 Event Queue 0 Entry Register 13 0274 0438 Q0E14 Event Queue 0 Entry Register 14 0274 043C Q0E15 Event Queue 0 Entry Register 15 0274 0440 Q1E0 Event Queue 1 Entry Register 0 0274 0444 Q1E1 Event Queue 1 Entry Register 1 0274 0448 Q1E2 Event Queue 1 Entry Register 2 0274 044C Q1E3 Event Queue 1 Entry Register 3 0274 0450 Q1E4 Event Queue 1 Entry Register 4 0274 0454 Q1E5 Event Queue 1 Entry Register 5 0274 0458 Q1E6 Event Queue 1 Entry Register 6 0274 045C Q1E7 Event Queue 1 Entry Register 7 0274 0460 Q1E8 Event Queue 1 Entry Register 8 0274 0464 Q1E9 Event Queue 1 Entry Register 9 0274 0468 Q1E10 Event Queue 1 Entry Register 10 0274 046C Q1E11 Event Queue 1 Entry Register 11 0274 0470 Q1E12 Event Queue 1 Entry Register 12 0274 0474 Q1E13 Event Queue 1 Entry Register 13 0274 0478 Q1E14 Event Queue 1 Entry Register 14 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 2 Registers (Part 5 of 14) Hex Address Acronym 0274 047C Q1E15 Event Queue 1 Entry Register 15 Register Name 0274 0480 Q2E0 Event Queue 2 Entry Register 0 0274 0484 Q2E1 Event Queue 2 Entry Register 1 0274 0488 Q2E2 Event Queue 2 Entry Register 2 0274 048C Q2E3 Event Queue 2 Entry Register 3 0274 0490 Q2E4 Event Queue 2 Entry Register 4 0274 0494 Q2E5 Event Queue 2 Entry Register 5 0274 0498 Q2E6 Event Queue 2 Entry Register 6 0274 049C Q2E7 Event Queue 2 Entry Register 7 0274 04A0 Q2E8 Event Queue 2 Entry Register 8 0274 04A4 Q2E9 Event Queue 2 Entry Register 9 0274 04A8 Q2E10 Event Queue 2 Entry Register 10 0274 04AC Q2E11 Event Queue 2 Entry Register 11 0274 04B0 Q2E12 Event Queue 2 Entry Register 12 0274 04B4 Q2E13 Event Queue 2 Entry Register 13 0274 04B8 Q2E14 Event Queue 2 Entry Register 14 0274 04BC Q2E15 Event Queue 2 Entry Register 15 0274 04C0 Q3E0 Event Queue 3 Entry Register 0 0274 04C4 Q3E1 Event Queue 3 Entry Register 1 0274 04C8 Q3E2 Event Queue 3 Entry Register 2 0274 04CC Q3E3 Event Queue 3 Entry Register 3 0274 04D0 Q3E4 Event Queue 3 Entry Register 4 0274 04D4 Q3E5 Event Queue 3 Entry Register 5 0274 04D8 Q3E6 Event Queue 3 Entry Register 6 0274 04DC Q3E7 Event Queue 3 Entry Register 7 0274 04E0 Q3E8 Event Queue 3 Entry Register 8 0274 04E4 Q3E9 Event Queue 3 Entry Register 9 0274 04E8 Q3E10 Event Queue 3 Entry Register 10 0274 04EC Q3E11 Event Queue 3 Entry Register 11 0274 04F0 Q3E12 Event Queue 3 Entry Register 12 0274 04F4 Q3E13 Event Queue 3 Entry Register 13 0274 04F8 Q3E14 Event Queue 3 Entry Register 14 0274 04FC Q3E15 Event Queue 3 Entry Register 15 0274 0500 - 0274 05FC - 0274 0600 QSTAT0 Queue Status Register 0 0274 0604 QSTAT1 Queue Status Register 1 0274 0608 QSTAT2 Queue Status Register 2 Queue Status Register 3 Reserved 0274 060C QSTAT3 0274 0610 - 0274 061C - 0274 0620 QWMTHRA Queue Watermark Threshold A Register 0274 0624 QWMTHRB Queue Watermark Threshold B Register 0274 0628 - 0274 063C - 0274 0640 CCSTAT 0274 0644 - 0274 06FC - Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 7-17 Reserved Reserved EDMA3CC Status Register Reserved TMS320C6674 Peripheral Information and Electrical Specifications 143 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 ADVANCE INFORMATION 144 www.ti.com EDMA3 Channel Controller 2 Registers (Part 6 of 14) Hex Address Acronym 0274 0700 - 0274 07FC - Register Name 0274 0800 MPFAR Memory Protection Fault Address Register 0274 0804 MPFSR Memory Protection Fault Status Register Reserved 0274 0808 MPFCR Memory Protection Fault Command Register 0274 080C MPPAG Memory Protection Page Attribute Register G 0274 0810 MPPA0 Memory Protection Page Attribute Register 0 0274 0814 MPPA1 Memory Protection Page Attribute Register 1 0274 0818 MPPA2 Memory Protection Page Attribute Register 2 0274 081C MPPA3 Memory Protection Page Attribute Register 3 0274 0820 MPPA4 Memory Protection Page Attribute Register 4 0274 0824 MPPA5 Memory Protection Page Attribute Register 5 0274 0828 MPPA6 Memory Protection Page Attribute Register 6 0274 082C MPPA7 Memory Protection Page Attribute Register 7 0274 082C - 0274 0FFC - 0274 1000 ER 0274 1004 ERH Event Register High 0274 1008 ECR Event Clear Register 0274 100C ECRH 0274 1010 ESR 0274 1014 ESRH Event Set Register High 0274 1018 CER Chained Event Register 0274 101C CERH 0274 1020 EER 0274 1024 EERH Event Enable Register High 0274 1028 EECR Event Enable Clear Register 0274 102C EECRH 0274 1030 EESR 0274 1034 EESRH 0274 1038 SER 0274 103C SERH Secondary Event Register High 0274 1040 SECR Secondary Event Clear Register 0274 1044 SECRH 0274 1048 - 0274 104C - 0274 1050 IER 0274 1054 IERH 0274 1058 IECR 0274 105C IECRH 0274 1060 IESR 0274 1064 IESRH Reserved Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable High Register Interrupt Enable Clear Register Interrupt Enable Clear High Register Interrupt Enable Set Register Interrupt Enable Set High Register 0274 1068 IPR 0274 106C IPRH Interrupt Pending Register Interrupt Pending High Register 0274 1070 ICR Interrupt Clear Register 0274 1074 ICRH Interrupt Clear High Register 0274 1078 IEVAL Interrupt Evaluate Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 2 Registers (Part 7 of 14) Hex Address Acronym 0274 107C - Register Name Reserved 0274 1080 QER QDMA Event Register 0274 1084 QEER QDMA Event Enable Register 0274 1088 QEECR QDMA Event Enable Clear Register 0274 108C QEESR QDMA Event Enable Set Register 0274 1090 QSER QDMA Secondary Event Register 0274 1094 QSECR QDMA Secondary Event Clear Register 0274 1098 - 0274 1FFF - Reserved ADVANCE INFORMATION Table 7-17 Shadow Region 0 Channel Registers 0274 2000 ER 0274 2004 ERH Event Register Event Register High 0274 2008 ECR Event Clear Register 0274 200C ECRH Event Clear Register High 0274 2010 ESR 0274 2014 ESRH Event Set Register High 0274 2018 CER Chained Event Register 0274 201C CERH 0274 2020 EER 0274 2024 EERH 0274 2028 EECR 0274 202C EECRH 0274 2030 EESR 0274 2034 EESRH 0274 2038 SER 0274 203C SERH 0274 2040 SECR 0274 2044 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0274 2048 - 0274 204C - 0274 2050 IER Reserved 0274 2054 IERH Interrupt Enable Register High 0274 2058 IECR Interrupt Enable Clear Register 0274 205C IECRH 0274 2060 IESR 0274 2064 IESRH 0274 2068 IPR 0274 206C IPRH Interrupt Pending Register High 0274 2070 ICR Interrupt Clear Register Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0274 2074 ICRH Interrupt Clear Register High 0274 2078 IEVAL Interrupt Evaluate Register 0274 207C - 0274 2080 QER Reserved QDMA Event Register 0274 2084 QEER QDMA Event Enable Register 0274 2088 QEECR QDMA Event Enable Clear Register 0274 208C QEESR QDMA Event Enable Set Register Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 145 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 www.ti.com EDMA3 Channel Controller 2 Registers (Part 8 of 14) Hex Address Acronym 0274 2090 QSER Register Name QDMA Secondary Event Register 0274 2094 QSECR 0274 2098 - 0274 21FF - QDMA Secondary Event Clear Register 0274 2200 ER 0274 2204 ERH Event Register High 0274 2208 ECR Event Clear Register 0274 220C ECRH 0274 2210 ESR 0274 2214 ESRH Event Set Register High 0274 2218 CER Chained Event Register 0274 221C CERH 0274 2220 EER 0274 2224 EERH Event Enable Register High 0274 2228 EECR Event Enable Clear Register 0274 222C EECRH 0274 2230 EESR 0274 2234 EESRH 0274 2238 SER 0274 223C SERH Secondary Event Register High 0274 2240 SECR Secondary Event Clear Register 0274 2244 SECRH 0274 2248 - 0274 224C - Reserved Shadow Region 1 Channel Registers ADVANCE INFORMATION 0274 2250 IER 0274 2254 IERH 0274 2258 IECR 0274 225C IECRH 0274 2260 IESR 0274 2264 IESRH Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0274 2268 IPR 0274 226C IPRH Interrupt Pending Register Interrupt Pending Register High 0274 2270 ICR Interrupt Clear Register 0274 2274 ICRH 0274 2278 IEVAL 0274 227C - Interrupt Clear Register High Interrupt Evaluate Register Reserved 0274 2280 QER QDMA Event Register 0274 2284 QEER QDMA Event Enable Register 0274 2288 QEECR QDMA Event Enable Clear Register 0274 228C QEESR QDMA Event Enable Set Register 0274 2290 QSER QDMA Secondary Event Register 0274 2294 QSECR QDMA Secondary Event Clear Register 0274 2298 - 0274 23FF - Reserved Shadow Region 2 Channel Registers 0274 2400 146 ER Event Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 2 Registers (Part 9 of 14) Hex Address Acronym 0274 2404 ERH Event Register High Register Name 0274 2408 ECR Event Clear Register 0274 240C ECRH Event Clear Register High 0274 2410 ESR 0274 2414 ESRH Event Set Register High 0274 2418 CER Chained Event Register 0274 241C CERH 0274 2420 EER 0274 2424 EERH 0274 2428 EECR 0274 242C EECRH 0274 2430 EESR 0274 2434 EESRH 0274 2438 SER 0274 243C SERH 0274 2440 SECR 0274 2444 SECRH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0274 2448 - 0274 244C - 0274 2450 IER 0274 2454 IERH Interrupt Enable Register High 0274 2458 IECR Interrupt Enable Clear Register 0274 245C IECRH 0274 2460 IESR 0274 2464 IESRH 0274 2468 IPR 0274 246C IPRH Interrupt Pending Register High 0274 2470 ICR Interrupt Clear Register Reserved Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0274 2474 ICRH Interrupt Clear Register High 0274 2478 IEVAL Interrupt Evaluate Register 0274 247C - 0274 2480 QER ADVANCE INFORMATION Table 7-17 Reserved QDMA Event Register 0274 2484 QEER QDMA Event Enable Register 0274 2488 QEECR QDMA Event Enable Clear Register 0274 248C QEESR QDMA Event Enable Set Register 0274 2490 QSER QDMA Secondary Event Register 0274 2494 QSECR 0274 2498 - 0274 25FF - QDMA Secondary Event Clear Register 0274 2600 ER 0274 2604 ERH Event Register High 0274 2608 ECR Event Clear Register 0274 260C ECRH 0274 2610 ESR 0274 2614 ESRH Reserved Shadow Region 3 Channel Registers Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Event Set Register High TMS320C6674 Peripheral Information and Electrical Specifications 147 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 www.ti.com EDMA3 Channel Controller 2 Registers (Part 10 of 14) ADVANCE INFORMATION Hex Address Acronym 0274 2618 CER 0274 261C CERH 0274 2620 EER 0274 2624 EERH Event Enable Register High 0274 2628 EECR Event Enable Clear Register 0274 262C EECRH 0274 2630 EESR 0274 2634 EESRH 0274 2638 SER 0274 263C SERH Secondary Event Register High 0274 2640 SECR Secondary Event Clear Register 0274 2644 SECRH 0274 2648 - 0274 264C - 0274 2650 IER 0274 2654 IERH 0274 2658 IECR 0274 265C IECRH 0274 2660 IESR 0274 2664 IESRH Register Name Chained Event Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0274 2668 IPR 0274 266C IPRH Interrupt Pending Register Interrupt Pending Register High 0274 2670 ICR Interrupt Clear Register 0274 2674 ICRH 0274 2678 IEVAL 0274 267C - Interrupt Clear Register High Interrupt Evaluate Register Reserved 0274 2680 QER QDMA Event Register 0274 2684 QEER QDMA Event Enable Register 0274 2688 QEECR QDMA Event Enable Clear Register 0274 268C QEESR QDMA Event Enable Set Register 0274 2690 QSER QDMA Secondary Event Register 0274 2694 QSECR QDMA Secondary Event Clear Register 0274 2698 - 0274 27FF - Reserved Shadow Region 4 Channel Registers 148 0274 2800 ER 0274 2804 ERH Event Register Event Register High 0274 2808 ECR Event Clear Register 0274 280C ECRH Event Clear Register High 0274 2810 ESR 0274 2814 ESRH Event Set Register High Event Set Register 0274 2818 CER Chained Event Register 0274 281C CERH Chained Event Register High 0274 2820 EER 0274 2824 EERH Event Enable Register Event Enable Register High 0274 2828 EECR Event Enable Clear Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 2 Registers (Part 11 of 14) Hex Address Acronym 0274 282C EECRH 0274 2830 EESR 0274 2834 EESRH 0274 2838 SER 0274 283C SERH 0274 2840 SECR 0274 2844 SECRH Register Name Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High 0274 2848 - 0274 284C - 0274 2850 IER Reserved 0274 2854 IERH Interrupt Enable Register High 0274 2858 IECR Interrupt Enable Clear Register 0274 285C IECRH 0274 2860 IESR 0274 2864 IESRH 0274 2868 IPR 0274 286C IPRH Interrupt Pending Register High 0274 2870 ICR Interrupt Clear Register Interrupt Enable Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0274 2874 ICRH Interrupt Clear Register High 0274 2878 IEVAL Interrupt Evaluate Register 0274 287C - 0274 2880 QER ADVANCE INFORMATION Table 7-17 Reserved QDMA Event Register 0274 2884 QEER QDMA Event Enable Register 0274 2888 QEECR QDMA Event Enable Clear Register 0274 288C QEESR QDMA Event Enable Set Register 0274 2890 QSER QDMA Secondary Event Register 0274 2894 QSECR 0274 2898 - 0274 29FF - QDMA Secondary Event Clear Register 0274 2A00 ER 0274 2A04 ERH Event Register High 0274 2A08 ECR Event Clear Register 0274 2A0C ECRH 0274 2A10 ESR 0274 2A14 ESRH Event Set Register High 0274 2A18 CER Chained Event Register 0274 2A1C CERH 0274 2A20 EER 0274 2A24 EERH Event Enable Register High 0274 2A28 EECR Event Enable Clear Register 0274 2A2C EECRH 0274 2A30 EESR 0274 2A34 EESRH 0274 2A38 SER 0274 2A3C SERH Reserved Shadow Region 5 Channel Registers Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High TMS320C6674 Peripheral Information and Electrical Specifications 149 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 www.ti.com EDMA3 Channel Controller 2 Registers (Part 12 of 14) Hex Address Acronym 0274 2A40 SECR 0274 2A44 SECRH 0274 2A48 - 0274 2A4C - 0274 2A50 IER 0274 2A54 IERH 0274 2A58 IECR 0274 2A5C IECRH ADVANCE INFORMATION 0274 2A60 IESR 0274 2A64 IESRH Register Name Secondary Event Clear Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High 0274 2A68 IPR 0274 2A6C IPRH Interrupt Pending Register Interrupt Pending Register High 0274 2A70 ICR Interrupt Clear Register 0274 2A74 ICRH Interrupt Clear Register High 0274 2A78 IEVAL Interrupt Evaluate Register 0274 2A7C - Reserved 0274 2A80 QER QDMA Event Register 0274 2A84 QEER QDMA Event Enable Register 0274 2A88 QEECR QDMA Event Enable Clear Register 0274 2A8C QEESR QDMA Event Enable Set Register 0274 2A90 QSER QDMA Secondary Event Register 0274 2A94 QSECR QDMA Secondary Event Clear Register 0274 2A98 - 0274 2BFF - Reserved Shadow Region 6 Channel Registers 150 0274 2C00 ER 0274 2C04 ERH Event Register Event Register High 0274 2C08 ECR Event Clear Register 0274 2C0C ECRH Event Clear Register High 0274 2C10 ESR 0274 2C14 ESRH Event Set Register High 0274 2C18 CER Chained Event Register 0274 2C1C CERH 0274 2C20 EER 0274 2C24 EERH 0274 2C28 EECR 0274 2C2C EECRH 0274 2C30 EESR 0274 2C34 EESRH 0274 2C38 SER 0274 2C3C SERH 0274 2C40 SECR 0274 2C44 SECRH 0274 2C48 - 0274 2C4C - 0274 2C50 IER 0274 2C54 IERH Event Set Register Chained Event Register High Event Enable Register Event Enable Register High Event Enable Clear Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Register High Secondary Event Clear Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 Channel Controller 2 Registers (Part 13 of 14) Hex Address Acronym 0274 2C58 IECR Register Name 0274 2C5C IECRH 0274 2C60 IESR 0274 2C64 IESRH 0274 2C68 IPR 0274 2C6C IPRH Interrupt Pending Register High 0274 2C70 ICR Interrupt Clear Register Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register 0274 2C74 ICRH Interrupt Clear Register High 0274 2C78 IEVAL Interrupt Evaluate Register 0274 2C7C - 0274 2C80 QER ADVANCE INFORMATION Table 7-17 Reserved QDMA Event Register 0274 2C84 QEER QDMA Event Enable Register 0274 2C88 QEECR QDMA Event Enable Clear Register 0274 2C8C QEESR QDMA Event Enable Set Register 0274 2C90 QSER QDMA Secondary Event Register 0274 2C94 QSECR 0274 2C98 - 0274 2DFF - QDMA Secondary Event Clear Register 0274 2E00 ER 0274 2E04 ERH Event Register High 0274 2E08 ECR Event Clear Register 0274 2E0C ECRH 0274 2E10 ESR 0274 2E14 ESRH Event Set Register High 0274 2E18 CER Chained Event Register 0274 2E1C CERH 0274 2E20 EER 0274 2E24 EERH Event Enable Register High 0274 2E28 EECR Event Enable Clear Register 0274 2E2C EECRH 0274 2E30 EESR 0274 2E34 EESRH 0274 2E38 SER 0274 2E3C SERH Secondary Event Register High 0274 2E40 SECR Secondary Event Clear Register 0274 2E44 SECRH 0274 2E48 - 0274 2E4C - Reserved Shadow Region 7 Channel Registers 0274 2E50 IER 0274 2E54 IERH 0274 2E58 IECR 0274 2E5C IECRH 0274 2E60 IESR 0274 2E64 IESRH 0274 2E68 IPR Copyright 2010 Texas Instruments Incorporated Event Register Event Clear Register High Event Set Register Chained Event Register High Event Enable Register Event Enable Clear Register High Event Enable Set Register Event Enable Set Register High Secondary Event Register Secondary Event Clear Register High Reserved Interrupt Enable Register Interrupt Enable Register High Interrupt Enable Clear Register Interrupt Enable Clear Register High Interrupt Enable Set Register Interrupt Enable Set Register High Interrupt Pending Register TMS320C6674 Peripheral Information and Electrical Specifications 151 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-17 www.ti.com EDMA3 Channel Controller 2 Registers (Part 14 of 14) Hex Address Acronym 0274 2E6C IPRH Interrupt Pending Register High Register Name 0274 2E70 ICR Interrupt Clear Register 0274 2E74 ICRH Interrupt Clear Register High 0274 2E78 IEVAL Interrupt Evaluate Register 0274 2E7C - Reserved ADVANCE INFORMATION 0274 2E80 QER QDMA Event Register 0274 2E84 QEER QDMA Event Enable Register 0274 2E88 QEECR QDMA Event Enable Clear Register 0274 2E8C QEESR QDMA Event Enable Set Register 0274 2E90 QSER QDMA Secondary Event Register 0274 2E94 QSECR QDMA Secondary Event Clear Register 0274 2E98 - 0274 2FFF - Reserved End of Table 7-17 Table 7-18 EDMA3 Channel Controller 0 Parameter RAM Hex Address Range Acronym Register Name 0270 4000 - 0270 401F - Parameter Set 0 0270 4020 - 0270 403F - Parameter Set 1 0270 4040 - 0270 405F - Parameter Set 2 0270 4060 - 0270 407F - Parameter Set 3 0270 4080 - 0270 409F - Parameter Set 4 0270 40A0 - 0270 40BF - Parameter Set 5 0270 40C0 - 0270 40DF - Parameter Set 6 0270 40E0 - 0270 40FF - Parameter Set 7 0270 4100 - 0270 411F - Parameter Set 8 0270 4120 - 0270 413F - Parameter Set 9 0270 4FC0 - 0270 4FDF - Parameter Set 126 0270 4FE0 - 0270 4FFF - Parameter Set 127 ... ... End of Table 7-18 Table 7-19 152 EDMA3 Channel Controller 1 Parameter RAM (Part 1 of 2) Hex Address Range Acronym Register Name 0272 4000 - 0272 401F - Parameter Set 0 0272 4020 - 0272 403F - Parameter Set 1 0272 4040 - 0272 405F - Parameter Set 2 0272 4060 - 0272 407F - Parameter Set 3 0272 4080 - 0272 409F - Parameter Set 4 0272 40A0 - 0272 40BF - Parameter Set 5 0272 40C0 - 0272 40DF - Parameter Set 6 0272 40E0 - 0272 40FF - Parameter Set 7 0272 4100 - 0272 411F - Parameter Set 8 0272 4120 - 0272 413F - Parameter Set 9 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-19 EDMA3 Channel Controller 1 Parameter RAM (Part 2 of 2) Hex Address Range Acronym ... Register Name ... 0272 47E0 - 0272 47FF - Parameter Set 63 0272 4800 - 0272 481F - Parameter Set 64 0272 4820 - 0272 483F - ... Parameter Set 65 ... 0272 5FC0 - 0272 7FDF - Parameter Set 510 0272 5FE0 - 0272 7FFF - Parameter Set 511 Table 7-20 ADVANCE INFORMATION End of Table 7-19 EDMA3 Channel Controller 2 Parameter RAM Hex Address Range Acronym Register Name 0274 4000 - 0274 401F - Parameter Set 0 0274 4020 - 0274 403F - Parameter Set 1 0274 4040 - 0274 405F - Parameter Set 2 0274 4060 - 0274 407F - Parameter Set 3 0274 4080 - 0274 409F - Parameter Set 4 0274 40A0 - 0274 40BF - Parameter Set 5 0274 40C0 - 0274 40DF - Parameter Set 6 0274 40E0 - 0274 40FF - Parameter Set 7 0274 4100 - 0274 411F - Parameter Set 8 0274 4120 - 0274 413F - ... Parameter Set 9 ... 0274 47E0 - 0274 47FF - Parameter Set 63 0274 4800 - 0274 481F - Parameter Set 64 0274 4820 - 0274 483F - ... Parameter Set 65 ... 0274 5FC0 - 0274 5FDF - Parameter Set 254 0274 5FE0 - 0274 5FFF - Parameter Set 255 End of Table 7-20 Table 7-21 EDMA3 TPCC0 Transfer Controller 0 Registers (Part 1 of 3) Hex Address Range Acronym Register Name 0276 0000 PID Peripheral Identification Register 0276 0004 TCCFG EDMA3TC Configuration Register 0276 0008 - 0276 00FC - 0276 0100 TCSTAT 0276 0104 - 0276 011C - 0276 0120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 0276 0124 ERREN Error Enable Register 0276 0128 ERRCLR Error Clear Register 0276 012C ERRDET Error Details Register 0276 0130 ERRCMD Error Interrupt Command Register 0276 0134 - 0276 013C - Copyright 2010 Texas Instruments Incorporated Reserved TMS320C6674 Peripheral Information and Electrical Specifications 153 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-21 ADVANCE INFORMATION 154 www.ti.com EDMA3 TPCC0 Transfer Controller 0 Registers (Part 2 of 3) Hex Address Range Acronym 0276 0140 RDRATE 0276 0144 - 0276 023C - 0276 0240 SAOPT Register Name Read Rate Register Reserved Source Active Options Register 0276 0244 SASRC Source Active Source Address Register 0276 0248 SACNT Source Active Count Register 0276 024C SADST Source Active Destination Address Register 0276 0250 SABIDX Source Active Source B-Index Register 0276 0254 SAMPPRXY Source Active Memory Protection Proxy Register 0276 0258 SACNTRLD Source Active Count Reload Register 0276 025C SASRCBREF Source Active Source Address B-Reference Register 0276 0260 SADSTBREF Source Active Destination Address B-Reference Register 0276 0264 - 0276 027C - 0276 0280 DFCNTRLD Destination FIFO Set Count Reload Reserved 0276 0284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0276 0288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0276 028C - 0276 02FC - 0276 0300 DFOPT0 Destination FIFO Options Register 0 Reserved 0276 0304 DFSRC0 Destination FIFO Source Address Register 0 0276 0308 DFCNT0 Destination FIFO Count Register 0 0276 030C DFDST0 Destination FIFO Destination Address Register 0 0276 0310 DFBIDX0 Destination FIFO BIDX Register 0 0276 0314 DFMPPRXY0 0276 0318 - 0276 033C - 0276 0340 DFOPT1 Destination FIFO Options Register 1 0276 0344 DFSRC1 Destination FIFO Source Address Register 1 0276 0348 DFCNT1 Destination FIFO Count Register 1 0276 034C DFDST1 Destination FIFO Destination Address Register 1 0276 0350 DFBIDX1 0276 0354 DFMPPRXY1 Destination FIFO Memory Protection Proxy Register 0 Reserved Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 0276 0358 - 0276 037C - 0276 0380 DFOPT2 Destination FIFO Options Register 2 Reserved 0276 0384 DFSRC2 Destination FIFO Source Address Register 2 0276 0388 DFCNT2 Destination FIFO Count Register 2 0276 038C DFDST2 Destination FIFO Destination Address Register 2 0276 0390 DFBIDX2 Destination FIFO BIDX Register 2 0276 0394 DFMPPRXY2 0276 0398 - 0276 03BC - Destination FIFO Memory Protection Proxy Register 2 0276 03C0 DFOPT3 Destination FIFO Options Register 3 0276 03C4 DFSRC3 Destination FIFO Source Address Register 3 Reserved 0276 03C8 DFCNT3 Destination FIFO Count Register 3 0276 03CC DFDST3 Destination FIFO Destination Address Register 3 0276 03D0 DFBIDX3 Destination FIFO BIDX Register 3 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-21 EDMA3 TPCC0 Transfer Controller 0 Registers (Part 3 of 3) Hex Address Range Acronym 0276 03D4 DFMPPRXY3 0276 03D8 - 0276 7FFC - Register Name Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-21 EDMA3 TPCC0 Transfer Controller 1 Registers (Part 1 of 2) Hex Address Range Acronym Register Name 0276 8000 PID Peripheral Identification Register 0276 8004 TCCFG EDMA3TC Configuration Register 0276 8008 - 0276 80FC - 0276 8100 TCSTAT 0276 8104 - 0276 811C - 0276 8120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 0276 8124 ERREN Error Enable Register 0276 8128 ERRCLR Error Clear Register 0276 812C ERRDET Error Details Register 0276 8130 ERRCMD Error Interrupt Command Register 0276 8134 - 0276 813C - 0276 8140 RDRATE 0276 8144 - 0276 823C - 0276 8240 SAOPT Reserved Read Rate Register Reserved Source Active Options Register 0276 8244 SASRC Source Active Source Address Register 0276 8248 SACNT Source Active Count Register 0276 824C SADST Source Active Destination Address Register 0276 8250 SABIDX Source Active Source B-Index Register 0276 8254 SAMPPRXY Source Active Memory Protection Proxy Register 0276 8258 SACNTRLD Source Active Count Reload Register 0276 825C SASRCBREF Source Active Source Address B-Reference Register 0276 8260 SADSTBREF Source Active Destination Address B-Reference Register 0276 8264 - 0276 827C - 0276 8280 DFCNTRLD Destination FIFO Set Count Reload 0276 8284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0276 8288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register Reserved 0276 828C - 0276 82FC - 0276 8300 DFOPT0 Destination FIFO Options Register 0 0276 8304 DFSRC0 Destination FIFO Source Address Register 0 0276 8308 DFCNT0 Destination FIFO Count Register 0 Reserved 0276 830C DFDST0 Destination FIFO Destination Address Register 0 0276 8310 DFBIDX0 Destination FIFO BIDX Register 0 0276 8314 DFM PPRXY0 0276 8318 - 0276 833C - 0276 8340 DFOPT1 Destination FIFO Options Register 1 0276 8344 DFSRC1 Destination FIFO Source Address Register 1 0276 8348 DFCNT1 Destination FIFO Count Register 1 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 7-22 Destination FIFO Memory Protection Proxy Register 0 Reserved TMS320C6674 Peripheral Information and Electrical Specifications 155 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-22 www.ti.com EDMA3 TPCC0 Transfer Controller 1 Registers (Part 2 of 2) Hex Address Range Acronym 0276 834C DFDST1 0276 8350 DFBIDX1 0276 8354 DFMPPRXY1 Register Name Destination FIFO Destination Address Register 1 Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 0276 8358 - 0276 837C - 0276 8380 DFOPT2 Destination FIFO Options Register 2 Reserved 0276 8384 DFSRC2 Destination FIFO Source Address Register 2 0276 8388 DFCNT2 Destination FIFO Count Register 2 ADVANCE INFORMATION 0276 838C DFDST2 Destination FIFO Destination Address Register 2 0276 8390 DFBIDX2 Destination FIFO BIDX Register 2 0276 8394 DFMPPRXY2 0276 8398 - 0276 83BC - Destination FIFO Memory Protection Proxy Register 2 0276 83C0 DFOPT3 Destination FIFO Options Register 3 0276 83C4 DFSRC3 Destination FIFO Source Address Register 3 0276 83C8 DFCNT3 Destination FIFO Count Register 3 0276 83CC DFDST3 Destination FIFO Destination Address Register 3 0276 83D0 DFBIDX3 Destination FIFO BIDX Register 3 0276 83D4 DFMPPRXY3 0276 83D8 - 0276 FFFC - Reserved Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-22 Table 7-23 EDMA3 TPCC 1 Transfer Controller 0 Registers (Part 1 of 2) Hex Address Range 156 Acronym Register Name 0277 0000 PID Peripheral Identification Register 0277 0004 TCCFG EDMA3TC Configuration Register 0277 0008 - 0277 00FC - 0277 0100 TCSTAT 0277 0104 - 0277 011C - 0277 0120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 0277 0124 ERREN Error Enable Register 0277 0128 ERRCLR Error Clear Register 0277 012C ERRDET Error Details Register 0277 0130 ERRCMD Error Interrupt Command Register 0277 0134 - 0277 013C - 0277 0140 RDRATE Reserved Read Rate Register 0277 0144 - 0277 023C - 0277 0240 SAOPT Source Active Options Register Reserved 0277 0244 SASRC Source Active Source Address Register 0277 0248 SACNT Source Active Count Register 0277 024C SADST Source Active Destination Address Register 0277 0250 SABIDX Source Active Source B-Index Register 0277 0254 SAMPPRXY Source Active Memory Protection Proxy Register 0277 0258 SACNTRLD Source Active Count Reload Register 0277 025C SASRCBREF Source Active Source Address B-Reference Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 TPCC 1 Transfer Controller 0 Registers (Part 2 of 2) Hex Address Range Acronym 0277 0260 SADSTBREF 0277 0264 - 0277 027C - 0277 0280 DFCNTRLD Register Name Source Active Destination Address B-Reference Register Reserved Destination FIFO Set Count Reload 0277 0284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0277 0288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0277 028C - 0277 02FC - 0277 0300 DFOPT0 Destination FIFO Options Register 0 Reserved 0277 0304 DFSRC0 Destination FIFO Source Address Register 0 0277 0308 DFCNT0 Destination FIFO Count Register 0 0277 030C DFDST0 Destination FIFO Destination Address Register 0 0277 0310 DFBIDX0 Destination FIFO BIDX Register 0 0277 0314 DFMPPRXY0 0277 0318 - 0277 033C - 0277 0340 DFOPT1 Destination FIFO Options Register 1 0277 0344 DFSRC1 Destination FIFO Source Address Register 1 0277 0348 DFCNT1 Destination FIFO Count Register 1 0277 034C DFDST1 Destination FIFO Destination Address Register 1 0277 0350 DFBIDX1 Destination FIFO BIDX Register 1 0277 0354 DFMPPRXY1 Destination FIFO Memory Protection Proxy Register 0 Reserved Destination FIFO Memory Protection Proxy Register 1 0277 0358 - 0277 037C - 0277 0380 DFOPT2 Destination FIFO Options Register 2 0277 0384 DFSRC2 Destination FIFO Source Address Register 2 0277 0388 DFCNT2 Destination FIFO Count Register 2 0277 038C DFDST2 Destination FIFO Destination Address Register 2 0277 0390 DFBIDX2 Destination FIFO BIDX Register 2 Reserved 0277 0394 DFMPPRXY2 0277 0398 - 0277 03BC - 0277 03C0 DFOPT3 Destination FIFO Options Register 3 0277 03C4 DFSRC3 Destination FIFO Source Address Register 3 0277 03C8 DFCNT3 Destination FIFO Count Register 3 0277 03CC DFDST3 Destination FIFO Destination Address Register 3 0277 03D0 DFBIDX3 0277 03D4 DFMPPRXY3 0277 03D8 - 0277 7FFC - ADVANCE INFORMATION Table 7-23 Destination FIFO Memory Protection Proxy Register 2 Reserved Destination FIFO BIDX Register 3 Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-23 Table 7-24 EDMA3 TPCC1 Transfer Controller 1 Registers (Part 1 of 3) Hex Address Range Acronym Register Name 0277 8000 PID Peripheral Identification Register 0277 8004 TCCFG EDMA3TC Configuration Register 0277 8008 - 0277 80FC - 0277 8100 TCSTAT 0277 8104 - 0277 811C - Copyright 2010 Texas Instruments Incorporated Reserved EDMA3TC Channel Status Register Reserved TMS320C6674 Peripheral Information and Electrical Specifications 157 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-24 ADVANCE INFORMATION 158 www.ti.com EDMA3 TPCC1 Transfer Controller 1 Registers (Part 2 of 3) Hex Address Range Acronym Register Name 0277 8120 ERRSTAT Error Register 0277 8124 ERREN Error Enable Register 0277 8128 ERRCLR Error Clear Register 0277 812C ERRDET Error Details Register 0277 8130 ERRCMD Error Interrupt Command Register 0277 8134 - 0277 813C - 0277 8140 RDRATE 0277 8144 - 0277 823C - 0277 8240 SAOPT Reserved Read Rate Register Reserved Source Active Options Register 0277 8244 SASRC Source Active Source Address Register 0277 8248 SACNT Source Active Count Register 0277 824C SADST Source Active Destination Address Register 0277 8250 SABIDX Source Active Source B-Index Register 0277 8254 SAMPPRXY Source Active Memory Protection Proxy Register 0277 8258 SACNTRLD Source Active Count Reload Register 0277 825C SASRCBREF Source Active Source Address B-Reference Register 0277 8260 SADSTBREF Source Active Destination Address B-Reference Register 0277 8264 - 0277 827C - 0277 8280 DFCNTRLD Destination FIFO Set Count Reload Reserved 0277 8284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0277 8288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0277 828C - 0277 82FC - 0277 8300 DFOPT0 Destination FIFO Options Register 0 Reserved 0277 8304 DFSRC0 Destination FIFO Source Address Register 0 0277 8308 DFCNT0 Destination FIFO Count Register 0 0277 830C DFDST0 Destination FIFO Destination Address Register 0 0277 8310 DFBIDX0 Destination FIFO BIDX Register 0 0277 8314 DFMPPRXY0 0277 8318 - 0277 833C - 0277 8340 DFOPT1 Destination FIFO Options Register 1 0277 8344 DFSRC1 Destination FIFO Source Address Register 1 0277 8348 DFCNT1 Destination FIFO Count Register 1 0277 834C DFDST1 Destination FIFO Destination Address Register 1 0277 8350 DFBIDX1 0277 8354 DFMPPRXY1 Destination FIFO Memory Protection Proxy Register 0 Reserved Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 0277 8358 - 0277 837C - 0277 8380 DFOPT2 Destination FIFO Options Register 2 Reserved 0277 8384 DFSRC2 Destination FIFO Source Address Register 2 0277 8388 DFCNT2 Destination FIFO Count Register 2 0277 838C DFDST2 Destination FIFO Destination Address Register 2 0277 8390 DFBIDX2 Destination FIFO BIDX Register 2 0277 8394 DFMPPRXY2 0277 8398 - 0277 83BC - 0277 83C0 DFOPT3 Destination FIFO Memory Protection Proxy Register 2 Reserved Destination FIFO Options Register 3 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-24 EDMA3 TPCC1 Transfer Controller 1 Registers (Part 3 of 3) Hex Address Range Acronym 0277 83C4 DFSRC3 Register Name 0277 83C8 DFCNT3 Destination FIFO Count Register 3 0277 83CC DFDST3 Destination FIFO Destination Address Register 3 0277 83D0 DFBIDX3 Destination FIFO BIDX Register 3 0277 83D4 DFMPPRXY3 0277 83D8 - 0277 FFFC - Destination FIFO Source Address Register 3 Destination FIFO Memory Protection Proxy Register 3 Reserved Table 7-25 ADVANCE INFORMATION End of Table 7-24 EDMA3 TPCC1 Transfer Controller 2 Registers (Part 1 of 2) Hex Address Range Acronym Register Name 0278 0000 PID Peripheral Identification Register 0278 0004 TCCFG EDMA3TC Configuration Register 0278 0008 - 0278 00FC - 0278 0100 TCSTAT 0278 0104 - 0278 011C - 0278 0120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 0278 0124 ERREN Error Enable Register 0278 0128 ERRCLR Error Clear Register 0278 012C ERRDET Error Details Register 0278 0130 ERRCMD Error Interrupt Command Register 0278 0134 - 0278 013C - 0278 0140 RDRATE 0278 0144 - 0278 023C - 0278 0240 SAOPT Reserved Read Rate Register Reserved Source Active Options Register 0278 0244 SASRC Source Active Source Address Register 0278 0248 SACNT Source Active Count Register 0278 024C SADST Source Active Destination Address Register 0278 0250 SABIDX Source Active Source B-Index Register 0278 0254 SAMPPRXY Source Active Memory Protection Proxy Register 0278 0258 SACNTRLD Source Active Count Reload Register 0278 025C SASRCBREF Source Active Source Address B-Reference Register 0278 0260 SADSTBREF Source Active Destination Address B-Reference Register 0278 0264 - 0278 027C - 0278 0280 DFCNTRLD Destination FIFO Set Count Reload Reserved 0278 0284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0278 0288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0278 028C - 0278 02FC - 0278 0300 DFOPT0 Destination FIFO Options Register 0 Reserved 0278 0304 DFSRC0 Destination FIFO Source Address Register 0 0278 0308 DFCNT0 Destination FIFO Count Register 0 0278 030C DFDST0 Destination FIFO Destination Address Register 0 0278 0310 DFBIDX0 Destination FIFO BIDX Register 0 0278 0314 DFMPPRXY0 Copyright 2010 Texas Instruments Incorporated Destination FIFO Memory Protection Proxy Register 0 TMS320C6674 Peripheral Information and Electrical Specifications 159 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-25 www.ti.com EDMA3 TPCC1 Transfer Controller 2 Registers (Part 2 of 2) Hex Address Range Acronym 0278 0318 - 0278 033C - 0278 0340 DFOPT1 Destination FIFO Options Register 1 0278 0344 DFSRC1 Destination FIFO Source Address Register 1 0278 0348 DFCNT1 Destination FIFO Count Register 1 0278 034C DFDST1 Destination FIFO Destination Address Register 1 0278 0350 DFBIDX1 0278 0354 DFMPPRXY1 Register Name Reserved Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 ADVANCE INFORMATION 0278 0358 - 0278 037C - 0278 0380 DFOPT2 Destination FIFO Options Register 2 Reserved 0278 0384 DFSRC2 Destination FIFO Source Address Register 2 0278 0388 DFCNT2 Destination FIFO Count Register 2 0278 038C DFDST2 Destination FIFO Destination Address Register 2 0278 0390 DFBIDX2 Destination FIFO BIDX Register 2 0278 0394 DFMPPRXY2 0278 0398 - 0278 03BC - Destination FIFO Memory Protection Proxy Register 2 0278 03C0 DFOPT3 Destination FIFO Options Register 3 0278 03C4 DFSRC3 Destination FIFO Source Address Register 3 0278 03C8 DFCNT3 Destination FIFO Count Register 3 0278 03CC DFDST3 Destination FIFO Destination Address Register 3 0278 03D0 DFBIDX3 Destination FIFO BIDX Register 3 0278 03D4 DFMPPRXY3 0278 03D8 - 0278 7FFC - Reserved Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-25 Table 7-26 EDMA3 TPCC1 Transfer Controller 3 Registers (Part 1 of 2) Hex Address Range 160 Acronym Register Name 0278 8000 PID Peripheral Identification Register 0278 8004 TCCFG EDMA3TC Configuration Register 0278 8008 - 0278 80FC - 0278 8100 TCSTAT 0278 8104 - 0278 811C - 0278 8120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 0278 8124 ERREN Error Enable Register 0278 8128 ERRCLR Error Clear Register 0278 812C ERRDET Error Details Register 0278 8130 ERRCMD Error Interrupt Command Register 0278 8134 - 0278 813C - 0278 8140 RDRATE 0278 8144 - 0278 823C - 0278 8240 SAOPT Reserved Read Rate Register Reserved Source Active Options Register 0278 8244 SASRC Source Active Source Address Register 0278 8248 SACNT Source Active Count Register 0278 824C SADST Source Active Destination Address Register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 TPCC1 Transfer Controller 3 Registers (Part 2 of 2) Hex Address Range Acronym 0278 8250 SABIDX Register Name 0278 8254 SAMPPRXY Source Active Memory Protection Proxy Register 0278 8258 SACNTRLD Source Active Count Reload Register 0278 825C SASRCBREF Source Active Source Address B-Reference Register 0278 8260 SADSTBREF Source Active Destination Address B-Reference Register Source Active Source B-Index Register 0278 8264 - 0278 827C - 0278 8280 DFCNTRLD Destination FIFO Set Count Reload Reserved 0278 8284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0278 8288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0278 828C - 0278 82FC - 0278 8300 DFOPT0 Destination FIFO Options Register 0 0278 8304 DFSRC0 Destination FIFO Source Address Register 0 0278 8308 DFCNT0 Destination FIFO Count Register 0 Reserved 0278 830C DFDST0 Destination FIFO Destination Address Register 0 0278 8310 DFBIDX0 Destination FIFO BIDX Register 0 0278 8314 DFMPPRXY0 0278 8318 - 0278 833C - 0278 8340 DFOPT1 Destination FIFO Options Register 1 0278 8344 DFSRC1 Destination FIFO Source Address Register 1 0278 8348 DFCNT1 Destination FIFO Count Register 1 0278 834C DFDST1 Destination FIFO Destination Address Register 1 0278 8350 DFBIDX1 0278 8354 DFMPPRXY1 ADVANCE INFORMATION Table 7-26 Destination FIFO Memory Protection Proxy Register 0 Reserved Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 0278 8358 - 0278 837C - 0278 8380 DFOPT2 Destination FIFO Options Register 2 Reserved 0278 8384 DFSRC2 Destination FIFO Source Address Register 2 0278 8388 DFCNT2 Destination FIFO Count Register 2 0278 838C DFDST2 Destination FIFO Destination Address Register 2 0278 8390 DFBIDX2 Destination FIFO BIDX Register 2 0278 8394 DFMPPRXY2 0278 8398 - 0278 83BC - Destination FIFO Memory Protection Proxy Register 2 0278 83C0 DFOPT3 Destination FIFO Options Register 3 0278 83C4 DFSRC3 Destination FIFO Source Address Register 3 0278 83C8 DFCNT3 Destination FIFO Count Register 3 0278 83CC DFDST3 Destination FIFO Destination Address Register 3 0278 83D0 DFBIDX3 Destination FIFO BIDX Register 3 0278 83D4 DFMPPRXY3 0278 83D8 - 0278 FFFC - Reserved Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-26 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 161 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-27 EDMA3 TPCC2 Transfer Controller 0 Registers (Part 1 of 2) Hex Address Range ADVANCE INFORMATION 162 www.ti.com Acronym Register Name 0279 0000 PID Peripheral Identification Register 0279 0004 TCCFG EDMA3TC Configuration Register 0279 0008 - 0279 00FC - 0279 0100 TCSTAT 0279 0104 - 0279 011C - 0279 0120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 0279 0124 ERREN Error Enable Register 0279 0128 ERRCLR Error Clear Register 0279 012C ERRDET Error Details Register 0279 0130 ERRCMD Error Interrupt Command Register 0279 0134 - 0279 013C - 0279 0140 RDRATE Reserved Read Rate Register 0279 0144 - 0279 023C - 0279 0240 SAOPT Source Active Options Register 0279 0244 SASRC Source Active Source Address Register 0279 0248 SACNT Source Active Count Register 0279 024C SADST Source Active Destination Address Register 0279 0250 SABIDX Source Active Source B-Index Register 0279 0254 SAMPPRXY Source Active Memory Protection Proxy Register 0279 0258 SACNTRLD Source Active Count Reload Register 0279 025C SASRCBREF Source Active Source Address B-Reference Register 0279 0260 SADSTBREF Source Active Destination Address B-Reference Register 0279 0264 - 0279 027C - 0279 0280 DFCNTRLD Reserved Reserved Destination FIFO Set Count Reload 0279 0284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0279 0288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0279 028C - 0279 02FC - 0279 0300 DFOPT0 Destination FIFO Options Register 0 Reserved 0279 0304 DFSRC0 Destination FIFO Source Address Register 0 0279 0308 DFCNT0 Destination FIFO Count Register 0 0279 030C DFDST0 Destination FIFO Destination Address Register 0 0279 0310 DFBIDX0 Destination FIFO BIDX Register 0 0279 0314 DFMPPRXY0 0279 0318 - 0279 033C - Destination FIFO Memory Protection Proxy Register 0 0279 0340 DFOPT1 Destination FIFO Options Register 1 0279 0344 DFSRC1 Destination FIFO Source Address Register 1 0279 0348 DFCNT1 Destination FIFO Count Register 1 0279 034C DFDST1 Destination FIFO Destination Address Register 1 0279 0350 DFBIDX1 Destination FIFO BIDX Register 1 0279 0354 DFMPPRXY1 Reserved Destination FIFO Memory Protection Proxy Register 1 0279 0358 - 0279 037C - 0279 0380 DFOPT2 Destination FIFO Options Register 2 Reserved 0279 0384 DFSRC2 Destination FIFO Source Address Register 2 0279 0388 DFCNT2 Destination FIFO Count Register 2 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 TPCC2 Transfer Controller 0 Registers (Part 2 of 2) Hex Address Range Acronym 0279 038C DFDST2 Destination FIFO Destination Address Register 2 Register Name 0279 0390 DFBIDX2 Destination FIFO BIDX Register 2 0279 0394 DFMPPRXY2 Destination FIFO Memory Protection Proxy Register 2 0279 0398 - 0279 03BC - 0279 03C0 DFOPT3 Destination FIFO Options Register 3 Reserved 0279 03C4 DFSRC3 Destination FIFO Source Address Register 3 0279 03C8 DFCNT3 Destination FIFO Count Register 3 0279 03CC DFDST3 Destination FIFO Destination Address Register 3 0279 03D0 DFBIDX3 Destination FIFO BIDX Register 3 0279 03D4 DFMPPRXY3 0279 03D8 - 0279 7FFC - ADVANCE INFORMATION Table 7-27 Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-27 Table 7-28 EDMA3 TPCC2 Transfer Controller 1 Registers (Part 1 of 2) Hex Address Range Acronym 0279 8000 PID Peripheral Identification Register EDMA3TC Configuration Register 0279 8004 TCCFG 0279 8008 - 0279 80FC - 0279 8100 TCSTAT 0279 8104 - 0279 811C - 0279 8120 ERRSTAT 0279 8124 ERREN Register Name Reserved EDMA3TC Channel Status Register Reserved Error Register Error Enable Register 0279 8128 ERRCLR Error Clear Register 0279 812C ERRDET Error Details Register 0279 8130 ERRCMD 0279 8134 - 0279 813C - Error Interrupt Command Register Reserved 0279 8140 RDRATE 0279 8144 - 0279 823C - Read Rate Register 0279 8240 SAOPT Source Active Options Register 0279 8244 SASRC Source Active Source Address Register 0279 8248 SACNT Source Active Count Register 0279 824C SADST Source Active Destination Address Register 0279 8250 SABIDX Source Active Source B-Index Register 0279 8254 SAMPPRXY Source Active Memory Protection Proxy Register Reserved 0279 8258 SACNTRLD Source Active Count Reload Register 0279 825C SASRCBREF Source Active Source Address B-Reference Register 0279 8260 SADSTBREF 0279 8264 - 0279 827C - Source Active Destination Address B-Reference Register Reserved 0279 8280 DFCNTRLD Destination FIFO Set Count Reload 0279 8284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 0279 8288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 0279 828C - 0279 82FC - Copyright 2010 Texas Instruments Incorporated Reserved TMS320C6674 Peripheral Information and Electrical Specifications 163 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-28 www.ti.com EDMA3 TPCC2 Transfer Controller 1 Registers (Part 2 of 2) Hex Address Range Acronym 0279 8300 DFOPT0 Register Name Destination FIFO Options Register 0 0279 8304 DFSRC0 Destination FIFO Source Address Register 0 0279 8308 DFCNT0 Destination FIFO Count Register 0 0279 830C DFDST0 Destination FIFO Destination Address Register 0 0279 8310 DFBIDX0 Destination FIFO BIDX Register 0 ADVANCE INFORMATION 0279 8314 DFMPPRXY0 0279 8318 - 0279 833C - 0279 8340 DFOPT1 Destination FIFO Options Register 1 0279 8344 DFSRC1 Destination FIFO Source Address Register 1 0279 8348 DFCNT1 Destination FIFO Count Register 1 0279 834C DFDST1 Destination FIFO Destination Address Register 1 0279 8350 DFBIDX1 0279 8354 DFMPPRXY1 Destination FIFO Memory Protection Proxy Register 0 Reserved Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 0279 8358 - 0279 837C - 0279 8380 DFOPT2 Destination FIFO Options Register 2 Reserved 0279 8384 DFSRC2 Destination FIFO Source Address Register 2 0279 8388 DFCNT2 Destination FIFO Count Register 2 0279 838C DFDST2 Destination FIFO Destination Address Register 2 0279 8390 DFBIDX2 Destination FIFO BIDX Register 2 0279 8394 DFMPPRXY2 0279 8398 - 0279 83BC - Destination FIFO Memory Protection Proxy Register 2 0279 83C0 DFOPT3 Destination FIFO Options Register 3 0279 83C4 DFSRC3 Destination FIFO Source Address Register 3 0279 83C8 DFCNT3 Destination FIFO Count Register 3 0279 83CC DFDST3 Destination FIFO Destination Address Register 3 0279 83D0 DFBIDX3 Destination FIFO BIDX Register 3 0279 83D4 DFMPPRXY3 0279 83D8 - 0279 FFFC - Reserved Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-28 Table 7-29 EDMA3 TPCC2 Transfer Controller 2 Registers (Part 1 of 3) Hex Address Range 164 Acronym Register Name 027A 0000 PID Peripheral Identification Register 027A 0004 TCCFG EDMA3TC Configuration Register 027A 0008 - 027A 00FC - 027A 0100 TCSTAT 027A 0104 - 027A 011C - 027A 0120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 027A 0124 ERREN Error Enable Register 027A 0128 ERRCLR Error Clear Register 027A 012C ERRDET Error Details Register 027A 0130 ERRCMD Error Interrupt Command Register 027A 0134 - 027A 013C - Reserved TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 TPCC2 Transfer Controller 2 Registers (Part 2 of 3) Hex Address Range Acronym 027A 0140 RDRATE Register Name Read Rate Register 027A 0144 - 027A 023C - 027A 0240 SAOPT Source Active Options Register Reserved 027A 0244 SASRC Source Active Source Address Register 027A 0248 SACNT Source Active Count Register 027A 024C SADST Source Active Destination Address Register 027A 0250 SABIDX Source Active Source B-Index Register 027A 0254 SAMPPRXY Source Active Memory Protection Proxy Register 027A 0258 SACNTRLD Source Active Count Reload Register 027A 025C SASRCBREF Source Active Source Address B-Reference Register 027A 0260 SADSTBREF Source Active Destination Address B-Reference Register 027A 0264 - 027A 027C - 027A 0280 DFCNTRLD Reserved Destination FIFO Set Count Reload 027A 0284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 027A 0288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 027A 028C - 027A 02FC - 027A 0300 DFOPT0 Destination FIFO Options Register 0 027A 0304 DFSRC0 Destination FIFO Source Address Register 0 027A 0308 DFCNT0 Destination FIFO Count Register 0 Reserved 027A 030C DFDST0 Destination FIFO Destination Address Register 0 027A 0310 DFBIDX0 Destination FIFO BIDX Register 0 027A 0314 DFMPPRXY0 027A 0318 - 027A 033C - Destination FIFO Memory Protection Proxy Register 0 Reserved 027A 0340 DFOPT1 Destination FIFO Options Register 1 027A 0344 DFSRC1 Destination FIFO Source Address Register 1 027A 0348 DFCNT1 Destination FIFO Count Register 1 027A 034C DFDST1 Destination FIFO Destination Address Register 1 027A 0350 DFBIDX1 027A 0354 DFMPPRXY1 Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 027A 0358 - 027A 037C - 027A 0380 DFOPT2 Destination FIFO Options Register 2 027A 0384 DFSRC2 Destination FIFO Source Address Register 2 027A 0388 DFCNT2 Destination FIFO Count Register 2 Reserved 027A 038C DFDST2 Destination FIFO Destination Address Register 2 027A 0390 DFBIDX2 Destination FIFO BIDX Register 2 027A 0394 DFMPPRXY2 027A 0398 - 027A 03BC - 027A 03C0 DFOPT3 Destination FIFO Options Register 3 027A 03C4 DFSRC3 Destination FIFO Source Address Register 3 Destination FIFO Memory Protection Proxy Register 2 Reserved 027A 03C8 DFCNT3 Destination FIFO Count Register 3 027A 03CC DFDST3 Destination FIFO Destination Address Register 3 027A 03D0 DFBIDX3 Destination FIFO BIDX Register 3 Copyright 2010 Texas Instruments Incorporated ADVANCE INFORMATION Table 7-29 TMS320C6674 Peripheral Information and Electrical Specifications 165 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-29 www.ti.com EDMA3 TPCC2 Transfer Controller 2 Registers (Part 3 of 3) Hex Address Range Acronym 027A 03D4 DFMPPRXY3 027A 03D8 - 027A 7FFC - Register Name Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-29 Table 7-30 EDMA3 TPCC2 Transfer Controller 3 Registers (Part 1 of 2) Hex Address Range ADVANCE INFORMATION 166 Acronym Register Name 027A 8000 PID Peripheral Identification Register 027A 8004 TCCFG EDMA3TC Configuration Register 027A 8008 - 027A 80FC - 027A 8100 TCSTAT 027A 8104 - 027A 811C - 027A 8120 ERRSTAT Reserved EDMA3TC Channel Status Register Reserved Error Register 027A 8124 ERREN Error Enable Register 027A 8128 ERRCLR Error Clear Register 027A 812C ERRDET Error Details Register 027A 8130 ERRCMD Error Interrupt Command Register 027A 8134 - 027A 813C - 027A 8140 RDRATE Reserved Read Rate Register 027A 8144 - 027A 823C - 027A 8240 SAOPT Source Active Options Register Reserved 027A 8244 SASRC Source Active Source Address Register 027A 8248 SACNT Source Active Count Register 027A 824C SADST Source Active Destination Address Register 027A 8250 SABIDX Source Active Source B-Index Register 027A 8254 SAMPPRXY Source Active Memory Protection Proxy Register 027A 8258 SACNTRLD Source Active Count Reload Register 027A 825C SASRCBREF Source Active Source Address B-Reference Register 027A 8260 SADSTBREF Source Active Destination Address B-Reference Register 027A 8264 - 027A 827C - 027A 8280 DFCNTRLD Reserved Destination FIFO Set Count Reload 027A 8284 DFSRCBREF Destination FIFO Set Destination Address B Reference Register 027A 8288 DFDSTBREF Destination FIFO Set Destination Address B Reference Register 027A 828C - 027A 82FC - 027A 8300 DFOPT0 Reserved Destination FIFO Options Register 0 027A 8304 DFSRC0 Destination FIFO Source Address Register 0 027A 8308 DFCNT0 Destination FIFO Count Register 0 027A 830C DFDST0 Destination FIFO Destination Address Register 0 027A 8310 DFBIDX0 Destination FIFO BIDX Register 0 027A 8314 DFMPPRXY0 027A 8318 - 027A 833C - Destination FIFO Memory Protection Proxy Register 0 027A 8340 DFOPT1 Destination FIFO Options Register 1 027A 8344 DFSRC1 Destination FIFO Source Address Register 1 027A 8348 DFCNT1 Destination FIFO Count Register 1 Reserved TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com EDMA3 TPCC2 Transfer Controller 3 Registers (Part 2 of 2) Hex Address Range Acronym 027A 834C DFDST1 027A 8350 DFBIDX1 027A 8354 DFMPPRXY1 Register Name Destination FIFO Destination Address Register 1 Destination FIFO BIDX Register 1 Destination FIFO Memory Protection Proxy Register 1 027A 8358 - 027A 837C - 027A 8380 DFOPT2 Reserved Destination FIFO Options Register 2 027A 8384 DFSRC2 Destination FIFO Source Address Register 2 027A 8388 DFCNT2 Destination FIFO Count Register 2 027A 838C DFDST2 Destination FIFO Destination Address Register 2 027A 8390 DFBIDX2 Destination FIFO BIDX Register 2 027A 8394 DFMPPRXY2 027A 8398 - 027A 83BC - 027A 83C0 DFOPT3 Destination FIFO Options Register 3 027A 83C4 DFSRC3 Destination FIFO Source Address Register 3 027A 83C8 DFCNT3 Destination FIFO Count Register 3 027A 83CC DFDST3 Destination FIFO Destination Address Register 3 027A 83D0 DFBIDX3 027A 83D4 DFMPPRXY3 027A 83D8 - 027A FFFC - Destination FIFO Memory Protection Proxy Register 2 Reserved Destination FIFO BIDX Register 3 Destination FIFO Memory Protection Proxy Register 3 Reserved End of Table 7-30 7.5 Interrupts 7.5.1 Interrupt Sources and Interrupt Controller The CPU interrupts on the C6674 device are configured through the C66x CorePac Interrupt Controller. The interrupt controller allows for up to 128 system events to be programmed to any of the twelve CPU interrupt inputs (CPUINT4 - CPUINT15), the CPU exception input (EXCEP), or the advanced emulation logic. The 128 system events consist of both internally-generated events (within the CorePac) and chip-level events. Additional system events are routed to each of the C66x CorePacs to provide chip-level events that are not required as CPU interrupts/exceptions to be routed to the interrupt controller as emulation events. Additionally, error-class events or infrequently used events are also routed through the system event router to offload the C66x CorePac interrupt selector. This is accomplished through INTC blocks, INTC[2:0], with one controller per C66x CorePac. This is clocked using CPU/6. The event controllers consist of simple combination logic to provide additional events to each C66x CorePac, plus the TPCC. INTC0 provides 17 additional events as well as 8 broadcast events to each of the C66x CorePacs, INTC2 provides 26 and 24 additional events to TPCC1 and TPCC2 respectively, and INTC3 provides 8 and 32additional events to TPCC0 and HyperLink respectively. There are a large amount of events on the chip level. The chip level INTC provides a flexible way to combine and remap those events. Multiple events can be combined to a single event through chip level INTC. However, an event can only be mapped to a single event output from the chip level INTC. The chip level INTC also allows the software to trigger system event through memory writes. The broadcast events to C66x CorePacs can be used for synchronization among multiple cores or inter-processor communication purpose and etc. For more details on the INTC features, please refer to the Interrupt Controller (INTC) for KeyStone Devices User Guide (literature number SPRUGW4). Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 167 ADVANCE INFORMATION Table 7-30 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-12 shows the C6674 interrupt topology. Figure 7-12 TMS320C6674 Interrupt Topology 8 Broadcast Events from INTC0 5 Reserved Secondary Events 71 Primary Events Core0 INTC0 91 Core-only Secondary Events 17 Secondary Events 71 Primary Events Core1 64 Common Events 17 Secondary Events ADVANCE INFORMATION 71 Primary Events Core2 17 Secondary Events 71 Primary Events Core3 17 Secondary Events 2 Reserved Secondary Events 64 Common Events 38 Primary Events INTC2 8 Reserved Secondary Events 26 Secondary Events 40 Primary Events 88 TPCC-only Events 24 Secondary Events 32 Queue Events 17 Reserved Secondary Events 32 Secondary Events CPU/3 TPCC1 CPU/3 TPCC2 Hyper Link INTC3 8 Primary Events 63 Events 8 Secondary Events CPU/2 TPCC0 Table 7-31 shows the mapping of system events. For more information on the Interrupt Controller, see the C66x CorePac User Guide (literature number SPRUGW0). Table 7-31 TMS320C6674 System Event Mapping — C66x CorePac Primary Interrupts (Part 1 of 4) Event Number Interrupt Event Description 0 EVT0 Event combiner 0 output 1 EVT1 Event combiner 1 output 2 EVT2 Event combiner 2 output 3 EVT3 Event combiner 3 output 1 TETB is half full 4 TETBHFULLINTn 5 TETBFULLINTn 1 TETB is full 6 TETBACQINTn 1 Acquisition has been completed 7 TETBOVFLINTn1 168 TMS320C6674 Peripheral Information and Electrical Specifications Overflow Condition Interrupt Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com TMS320C6674 System Event Mapping — C66x CorePac Primary Interrupts (Part 2 of 4) Event Number Interrupt Event 8 TETBUNFLINTn 9 EMU_DTDMA 1 Description Underflow Condition Interrupt ECM interrupt for: 4 1. Host scan access 2. DTDMA transfer complete 3. AET interrupt 10 MSMC_mpf_errorn Memory protection fault indicators for local core 11 EMU_RTDXRX RTDX receive complete 12 EMU_RTDXTX RTDX transmit complete 13 IDMA0 IDMA Channel 0 Interrupt 14 IDMA1 15 SEMERRn 16 SEMINTn 2 17 PCIEXpress_MSI_INTn ADVANCE INFORMATION Table 7-31 IDMA Channel 1 Interrupt 2 Semaphore Error Interrupt Semaphore Interrupt 3 Message Signaled Interrupt Mode 18 10 TSIP0_ERRINT[n] TSIP0 receive/transmit error interrupt 19 TSIP1_ERRINT[n]10 TSIP1 receive/transmit error interrupt 9 20 INTDST(n+16) SRIO Interrupt 21 INTC0_OUT(32+0+11*n) Interrupt Controller Output 22 INTC0_OUT(32+1+11*n) Interrupt Controller Output 23 INTC0_OUT(32+2+11*n) Interrupt Controller Output 24 INTC0_OUT(32+3+11*n) Interrupt Controller Output 25 INTC0_OUT(32+4+11*n) Interrupt Controller Output 26 INTC0_OUT(32+5+11*n) Interrupt Controller Output 27 INTC0_OUT(32+6+11*n) Interrupt Controller Output 28 INTC0_OUT(32+7+11*n) Interrupt Controller Output 29 INTC0_OUT(32+8+11*n) Interrupt Controller Output 30 INTC0_OUT(32+9+11*n) Interrupt Controller Output 31 INTC0_OUT(32+10+11*n) Interrupt Controller Output 32 QM_INT_LOW_0 QM interrupt 33 QM_INT_LOW_1 QM interrupt 34 QM_INT_LOW_2 QM interrupt 35 QM_INT_LOW_3 QM interrupt 36 QM_INT_LOW_4 QM interrupt 37 QM_INT_LOW_5 QM interrupt 38 QM_INT_LOW_6 QM interrupt 39 QM_INT_LOW_7 QM interrupt 40 QM_INT_LOW_8 QM interrupt 41 QM_INT_LOW_9 QM interrupt 42 QM_INT_LOW_10 QM interrupt 43 QM_INT_LOW_11 QM interrupt 44 QM_INT_LOW_12 QM interrupt 45 QM_INT_LOW_13 QM interrupt 46 QM_INT_LOW_14 QM interrupt 47 QM_INT_LOW_15 QM interrupt 48 8 QM interrupt QM_INT_HIGH_n Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 169 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-31 www.ti.com TMS320C6674 System Event Mapping — C66x CorePac Primary Interrupts (Part 3 of 4) Event Number 49 Interrupt Event QM_INT_HIGH_(n+8) 8 Description QM interrupt 50 8 QM_INT_HIGH_(n+16) QM interrupt 51 QM_INT_HIGH_(n+24)8 QM interrupt 10 TSIP0 receive Frame Sync interrupt 10 TSIP0 receive Super frame interrupt 10 TSIP0 transmit Frame Sync interrupt 10 TSIP0 transmit Super frame interrupt 10 TSIP1 receive Frame Sync interrupt 52 TSIP0_RFSINT[n] 53 TSIP0_RSFINT[n] 54 TSIP0_XFSINT[n] 55 TSIP0_XSFINT[n] ADVANCE INFORMATION 56 TSIP1_RFSINT[n] 57 TSIP1_RSFINT[n]10 TSIP1 receive Super frame interrupt 58 10 TSIP1_XFSINT[n] TSIP1 transmit Frame Sync interrupt 59 TSIP1_XSFINT[n] 10 TSIP1 transmit Super frame interrupt 60 Reserved 61 Reserved 62 INTC0_OUT(2+8*n) Interrupt Controller Output 63 INTC0_OUT(3+8*n) Interrupt Controller Output 6 Local Timer interrupt low 64 TINTLn 65 TINTHn6 66 Reserved 67 Reserved 68 Reserved 69 Reserved 70 Reserved 71 Reserved 72 Reserved 73 Reserved 74 Reserved 75 Reserved 76 Reserved 77 Reserved 78 Reserved 79 Reserved 80 Reserved 81 Reserved 82 GPINT8 Local GPIO Interrupt 83 GPINT9 Local GPIO Interrupt 84 GPINT10 Local GPIO Interrupt 85 GPINT11 Local GPIO Interrupt 86 GPINT12 Local GPIO Interrupt 87 GPINT13 Local GPIO Interrupt 88 GPINT14 Local GPIO Interrupt 89 GPINT15 Local GPIO Interrupt 90 5 GPINTn Local GPIO Interrupt 91 IPC_LOCAL Inter DSP Interrupt from IPCGRn 92 INTC0_OUT(4+8*n) Interrupt Controller Output 170 TMS320C6674 Peripheral Information and Electrical Specifications Local Timer interrupt high Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com TMS320C6674 System Event Mapping — C66x CorePac Primary Interrupts (Part 4 of 4) Event Number Interrupt Event Description 93 INTC0_OUT(5+8*n) Interrupt Controller Output 94 INTC0_OUT(6+8*n) Interrupt Controller Output 95 INTC0_OUT(7+8*n) Interrupt Controller Output 96 INTERR Dropped CPU interrupt event 97 EMC_IDMAERR Invalid IDMA parameters 98 Reserved 99 Reserved 100 EFIINTA EFI Interrupt from Side A 101 EFIINTB EFI Interrupt from Side B 102 INTC0_OUT0 Interrupt Controller Output 103 INTC0_OUT1 Interrupt Controller Output 104 INTC0_OUT8 Interrupt Controller Output 105 INTC0_OUT9 Interrupt Controller Output 106 INTC0_OUT16 Interrupt Controller Output 107 INTC0_OUT17 Interrupt Controller Output 108 INTC0_OUT24 Interrupt Controller Output 109 INTC0_OUT25 Interrupt Controller Output 110 MDMAERREVT VbusM error event 111 Reserved 112 CPU/2_EDMACC_AETEVT CPU/2_TPCC AET Event 113 PMC_ED Single bit error detected during DMA read 114 CPU/3_1_EDMACC_AETEVT CPU/3_1_TPCC AET Event 115 CPU/3_2_EDMACC_AETEVT CPU/3_2_TPCC AET Event 116 UMC_ED1 Corrected bit error detected 117 UMC_ED2 Uncorrected bit error detected 118 PDC_INT Power Down sleep interrupt 119 SYS_CMPA SYS DSP Memory Protection fault event 120 PMC_CMPA PMC DSP Core Protection fault event 121 PMC_DMPA PMC Memory Protection fault event 122 DMC_CMPA DMC DSP Core Protection fault event 123 DMC_DMPA DMC Memory Protection fault event 124 UMC_CMPA UMC DSP Core Protection fault event 125 UMC_DMPA UMC Memory Protection fault event 126 EMC_CMPA EMC DSP Core Protection fault event 127 EMC_BUSERR EMC 1. ADVANCE INFORMATION Table 7-31 core[n] will receive TETBHFULLINTn, TETBFULLINTn, TETBACQINTn, TETBOVFLINTn and TETBUNFLINTn. 2. core[n] will receive SEMINTn and SEMERRn. 3. core[n] will receive PCIEXpress_MSI_INTn. 4. core[n] will receive MSMC_mpf_errorn. 5. core[n] will receive GPINTn. 6. core[n] will receive TINTLn and TINTHn. 8. n is core number. 9. core[n] will receive INTDST(n+16). 10. core[n] will receive TSIPx_xxx[n] End of Table 7-31 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 171 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-32 www.ti.com INTC0 Event Inputs (Secondary Interrupts for C66x CorePacs) (Part 1 of 4) ADVANCE INFORMATION Input Event# on CP_INTC System Interrupt Description 0 CPU/3_1_EDMACC_ERRINT CPU/3_1_TPCC Error Interrupt 1 CPU/3_1_EDMACC_MPINT CPU/3_1_TPCC Memory Protection Interrupt 2 CPU/3_1_EDMATC_ERRINT0 CPU/3_1_TPTC0 Error Interrupt 3 CPU/3_1_EDMATC_ERRINT1 CPU/3_1_TPTC1 Error Interrupt 4 CPU/3_1_EDMATC_ERRINT2 CPU/3_1_TPTC2 Error Interrupt 5 CPU/3_1_EDMATC_ERRINT3 CPU/3_1_TPTC3 Error Interrupt 6 CPU/3_1_EDMACC_GINT CPU/3_1_TPCC GINT 7 Reserved 8 CPU/3_1_TPCCINT0 CPU/3_1_TPCC Individual Completion Interrupt 9 CPU/3_1_TPCCINT1 CPU/3_1_TPCC Individual Completion Interrupt 10 CPU/3_1_TPCCINT2 CPU/3_1_TPCC Individual Completion Interrupt 11 CPU/3_1_TPCCINT3 CPU/3_1_TPCC Individual Completion Interrupt 12 CPU/3_1_TPCCINT4 CPU/3_1_TPCC Individual Completion Interrupt 13 CPU/3_1_TPCCINT5 CPU/3_1_TPCC Individual Completion Interrupt 14 CPU/3_1_TPCCINT6 CPU/3_1_TPCC Individual Completion Interrupt 15 CPU/3_1_TPCCINT7 CPU/3_1_TPCC Individual Completion Interrupt 16 CPU/3_2_EDMACC_ERRINT CPU/3_2_TPCC Error Interrupt 17 CPU/3_2_EDMACC_MPINT CPU/3_2_TPCC Memory Protection Interrupt 18 CPU/3_2_EDMATC_ERRINT0 CPU/3_2_TPTC0 Error Interrupt 19 CPU/3_2_EDMATC_ERRINT1 CPU/3_2_TPTC1 Error Interrupt 20 CPU/3_2_EDMATC_ERRINT2 CPU/3_2_TPTC2 Error Interrupt 21 CPU/3_2_EDMATC_ERRINT3 CPU/3_2_TPTC3 Error Interrupt 22 CPU/3_2_EDMACC_GINT CPU/3_2_TPCC GINT 23 Reserved 24 CPU/3_2_TPCCINT0 CPU/3_2_TPCC Individual Completion Interrupt 25 CPU/3_2_TPCCINT1 CPU/3_2_TPCC Individual Completion Interrupt 26 CPU/3_2_TPCCINT2 CPU/3_2_TPCC Individual Completion Interrupt 27 CPU/3_2_TPCCINT3 CPU/3_2_TPCC Individual Completion Interrupt 28 CPU/3_2_TPCCINT4 CPU/3_2_TPCC Individual Completion Interrupt 29 CPU/3_2_TPCCINT5 CPU/3_2_TPCC Individual Completion Interrupt 30 CPU/3_2_TPCCINT6 CPU/3_2_TPCC Individual Completion Interrupt 31 CPU/3_2_TPCCINT7 CPU/3_2_TPCC Individual Completion Interrupt 32 CPU/2_EDMACC_ERRINT CPU/2_TPCC Error Interrupt 33 CPU/2_EDMACC_MPINT CPU/2_TPCC Memory Protection Interrupt 34 CPU/2_EDMATC_ERRINT0 CPU/2_TPTC0 Error Interrupt 35 CPU/2_EDMATC_ERRINT1 CPU/2_TPTC1 Error Interrupt 36 CPU/2_EDMACC_GINT CPU/2_TPCC GINT 37 Reserved 38 CPU/2_TPCCINT0 CPU/2_TPCC Individual Completion Interrupt 39 CPU/2_TPCCINT1 CPU/2_TPCC Individual Completion Interrupt 40 CPU/2_TPCCINT2 CPU/2_TPCC Individual Completion Interrupt 41 CPU/2_TPCCINT3 CPU/2_TPCC Individual Completion Interrupt 42 CPU/2_TPCCINT4 CPU/2_TPCC Individual Completion Interrupt 43 CPU/2_TPCCINT5 CPU/2_TPCC Individual Completion Interrupt 172 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com INTC0 Event Inputs (Secondary Interrupts for C66x CorePacs) (Part 2 of 4) Input Event# on CP_INTC System Interrupt Description 44 CPU/2_TPCCINT6 CPU/2_TPCC Individual Completion Interrupt CPU/2_TPCC Individual Completion Interrupt 45 CPU/2_TPCCINT7 46 Reserved 47 QM_INT_PASS_TXQ_PEND_12 QM_SS_PASS pend event 48 PCIEXpress_ERR_INT Protocol Error Interrupt 49 PCIEXpress_PM_INT Power Management Interrupt 50 PCIEXpress_Legacy_INTA Legacy Interrupt Mode 51 PCIEXpress_Legacy_INTB Legacy Interrupt Mode 52 PCIEXpress_Legacy_INTC Legacy Interrupt Mode 53 PCIEXpress_Legacy_INTD Legacy Interrupt Mode 54 SPIINT0 SPI Interrupt0 55 SPIINT1 SPI Interrupt1 56 SPIXEVT Transmit event 57 SPIREVT Receive event 58 I2CINT I2C interrupt 59 I2CREVT I2C Receive event 60 I2CXEVT I2C Transmit event 61 Reserved 62 Reserved 63 TETBHFULLINT TETB is half full 64 TETBFULLINT TETB is full 65 TETBACQINT Acquisition has been completed 66 TETBOVFLINT Overflow condition occur 67 TETBUNFLINT Underflow condition occur 68 mdio_link_intr0 PASS_mdio Interrupt 69 mdio_link_intr1 PASS_mdio Interrupt 70 mdio_user_intr0 PASS_mdio Interrupt 71 mdio_user_intr1 PASS_mdio Interrupt 72 misc_intr PASS_misc Interrupt 73 CP_Tracer_core_0_INTD CP_Tracer sliding time window interrupt for individual core 74 CP_Tracer_core_1_INTD CP_Tracer sliding time window interrupt for individual core 75 CP_Tracer_core_2_INTD CP_Tracer sliding time window interrupt for individual core 76 CP_Tracer_core_3_INTD CP_Tracer sliding time window interrupt for individual core 77 CP_Tracer_DDR_INTD CP_Tracer sliding time window interrupt for DDR3 EMIF1 78 CP_Tracer_MSMC_0_INTD CP_Tracer sliding time window interrupt for MSMC SRAM Bank0 79 CP_Tracer_MSMC_1_INTD CP_Tracer sliding time window interrupt for MSMC SRAM Bank1 80 CP_Tracer_MSMC_2_INTD CP_Tracer sliding time window interrupt for MSMC SRAM Bank2 81 CP_Tracer_MSMC_3_INTD CP_Tracer sliding time window interrupt for MSMC SRAM Bank3 81 CP_Tracer_CFG_INTD CP_Tracer sliding time window interrupt for CFG0 SCR 82 CP_Tracer_QM_SS_CFG_INTD CP_Tracer sliding time window interrupt for QM_SS CFG 84 CP_Tracer_QM_SS_DMA_INTD CP_Tracer sliding time window interrupt for QM_SS Slave 85 CP_Tracer_SEM_INTD CP_Tracer sliding time window interrupt for Semaphore 86 PSC_ALLINT Power & Sleep Controller Interrupt 87 MSMC_scrub_cerror Correctable (1-bit) soft error detected during scrub cycle Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications ADVANCE INFORMATION Table 7-32 173 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-32 www.ti.com INTC0 Event Inputs (Secondary Interrupts for C66x CorePacs) (Part 3 of 4) ADVANCE INFORMATION Input Event# on CP_INTC System Interrupt Description 88 BOOTCFG_INTD Chip-level MMR Error Register 89 Reserved Reserved 90 MPU0_INTD (MPU0_ADDR_ERR_INT and MPU0 Addressing violation interrupt and Protection violation interrupt. MPU0_PROT_ERR_INT combined) 91 QM_INT_PASS_TXQ_PEND_13 92 MPU1_INTD (MPU1_ADDR_ERR_INT and MPU1 Addressing violation interrupt and Protection violation interrupt. MPU1_PROT_ERR_INT combined) 93 QM_INT_PASS_TXQ_PEND_14 94 MPU2_INTD (MPU2_ADDR_ERR_INT and MPU2 Addressing violation interrupt and Protection violation interrupt. MPU2_PROT_ERR_INT combined) QM_SS_PASS pend event QM_SS_PASS pend event 95 QM_INT_PASS_TXQ_PEND_15 96 MPU3_INTD (MPU3_ADDR_ERR_INT and MPU3 Addressing violation interrupt and Protection violation interrupt. MPU3_PROT_ERR_INT combined) QM_SS_PASS pend event 97 QM_INT_PASS_TXQ_PEND_16 QM_SS_PASS pend event 98 MSMC_dedc_cerror Correctable (1-bit) soft error detected on SRAM read 99 MSMC_dedc_nc_error Non-correctable (2-bit) soft error detected on SRAM read 100 MSMC_scrub_nc_error Non-correctable (2-bit) soft error detected during scrub cycle 101 Reserved 102 MSMC_mpf_error8 Memory protection fault indicators for each system master PrivID 103 MSMC_mpf_error9 Memory protection fault indicators for each system master PrivID 104 MSMC_mpf_error10 Memory protection fault indicators for each system master PrivID 105 MSMC_mpf_error11 Memory protection fault indicators for each system master PrivID 105 MSMC_mpf_error12 Memory protection fault indicators for each system master PrivID 107 MSMC_mpf_error13 Memory protection fault indicators for each system master PrivID 108 MSMC_mpf_error14 Memory protection fault indicators for each system master PrivID 109 MSMC_mpf_error15 Memory protection fault indicators for each system master PrivID 110 DDR3_ERR DDR3 EMIF error interrupt 111 Hyperbridge_int_o Hyperbridge Interrupt 112 INTDST0 RapidIO Interrupt 113 INTDST1 RapidIO Interrupt 114 INTDST2 RapidIO Interrupt 115 INTDST3 RapidIO Interrupt 116 INTDST4 RapidIO Interrupt 117 INTDST5 RapidIO Interrupt 118 INTDST6 RapidIO Interrupt 119 INTDST7 RapidIO Interrupt 120 INTDST8 RapidIO Interrupt 121 INTDST9 RapidIO Interrupt 122 INTDST10 RapidIO Interrupt 123 INTDST11 RapidIO Interrupt 124 INTDST12 RapidIO Interrupt 125 INTDST13 RapidIO Interrupt 126 INTDST14 RapidIO Interrupt 127 INTDST15 RapidIO Interrupt 128 EASYNCERR EMIF16 Error Interrupt 174 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com INTC0 Event Inputs (Secondary Interrupts for C66x CorePacs) (Part 4 of 4) Input Event# on CP_INTC System Interrupt Description 129 CP_Tracer_core_4_INTD CP_Tracer sliding time window interrupt for individual core 130 CP_Tracer_core_5_INTD CP_Tracer sliding time window interrupt for individual core 131 CP_Tracer_core_6_INTD CP_Tracer sliding time window interrupt for individual core 132 CP_Tracer_core_7_INTD CP_Tracer sliding time window interrupt for individual core 133 QM_INT_CDMA_0 QM Interrupt for CDMA Starvation 134 QM_INT_CDMA_1 QM Interrupt for CDMA Starvation 135 RapidIO_INT_CDMA_0 RapidIO Interrupt for CDMA Starvation 136 PASS_INT_CDMA_0 PASS Interrupt for CDMA Starvation 137 SmartReflex_intrreq0 SmartReflex Sensor interrupt 138 SmartReflex_intrreq1 SmartReflex Sensor interrupt 139 SmartReflex_intrreq2 SmartReflex Sensor interrupt 140 SmartReflex_intrreq3 SmartReflex Sensor interrupt 141 VPNoSMPSAck VPVOLTUPDATE has been asserted but SMPS has not been responded in a defined time interval 142 VPEqValue SRSINTERUPTZ is asserted, but the new voltage is not different from the current SMPS voltage. 143 VPMaxVdd the new voltage required is equal to or greater than MaxVdd. 144 VPMinVdd the new voltage required is equal to or less than MinVdd. 145 VPINIDLE Indicating that the FSM of Voltage Processor is in idle. 146 VPOPPChangeDone Indicating that the average frequency error is within the desired limit. 147 Reserved 148 UARTINT 149 URXEVT UART Receive Event 150 UTXEVT UART Transmit Event 151 QM_INT_PASS_TXQ_PEND_17 QM_SS_PASS pend event 152 QM_INT_PASS_TXQ_PEND_18 QM_SS_PASS pend event 153 QM_INT_PASS_TXQ_PEND_19 QM_SS_PASS pend event 154 QM_INT_PASS_TXQ_PEND_20 QM_SS_PASS pend event 155 QM_INT_PASS_TXQ_PEND_21 QM_SS_PASS pend event 156 QM_INT_PASS_TXQ_PEND_22 QM_SS_PASS pend event 157 QM_INT_PASS_TXQ_PEND_23 QM_SS_PASS pend event 158 QM_INT_PASS_TXQ_PEND_24 QM_SS_PASS pend event 159 QM_INT_PASS_TXQ_PEND_25 QM_SS_PASS pend event UART Interrupt End of Table 7-32 Table 7-33 INTC2 Event Inputs (Secondary Events for TPCC1 and TPCC2) (Part 1 of 5) Input Event # on INTC System Interrupt Description 0 GPINT8 GPIO Interrupt 1 GPINT9 GPIO Interrupt 2 GPINT10 GPIO Interrupt 3 GPINT11 GPIO Interrupt 4 GPINT12 GPIO Interrupt 5 GPINT13 GPIO Interrupt 6 GPINT14 GPIO Interrupt Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 175 ADVANCE INFORMATION Table 7-32 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-33 www.ti.com INTC2 Event Inputs (Secondary Events for TPCC1 and TPCC2) (Part 2 of 5) Input Event # on INTC System Interrupt Description 7 GPIO Interrupt GPINT15 ADVANCE INFORMATION 8 TETBHFULLINT TETB is half full 9 TETBFULLINT TETB is full 10 TETBACQINT Acquisition has been completed 11 TETBHFULLINT0 TETB is half full 12 TETBFULLINT0 TETB is full 13 TETBACQINT0 Acquisition has been completed 14 TETBHFULLINT1 TETB is half full 15 TETBFULLINT1 TETB is full 16 TETBACQINT1 Acquisition has been completed 17 TETBHFULLINT2 TETB is half full 18 TETBFULLINT2 TETB is full 19 TETBACQINT2 Acquisition has been completed 20 TETBHFULLINT3 TETB is half full 21 TETBFULLINT3 TETB is full 22 TETBACQINT3 Acquisition has been completed 23 Reserved 24 QM_INT_HIGH_16 QM Interrupt for IPC_core_0 25 QM_INT_HIGH_17 QM Interrupt for IPC_core_1 26 QM_INT_HIGH_18 QM Interrupt for IPC_core_2 27 QM_INT_HIGH_19 QM Interrupt for IPC_core_3 28 Reserved 29 Reserved 30 Reserved 31 Reserved 32 QM_INT_HIGH_24 QM Interrupt for IPC_core_0 33 QM_INT_HIGH_25 QM Interrupt for IPC_core_1 34 QM_INT_HIGH_26 QM Interrupt for IPC_core_2 35 QM_INT_HIGH_27 QM Interrupt for IPC_core_3 36 Reserved 37 Reserved 38 Reserved 39 Reserved 40 mdio_link_intr0 PASS_mdio Interrupt 41 mdio_link_intr1 PASS_mdio Interrupt 42 mdio_user_intr0 PASS_mdio Interrupt 43 mdio_user_intr1 PASS_mdio Interrupt 44 misc_intr PASS_misc Interrupt 45 Tracer_core_0_INTD Tracer sliding time window interrupt for individual core 46 Tracer_core_1_INTD Tracer sliding time window interrupt for individual core 47 Tracer_core_2_INTD Tracer sliding time window interrupt for individual core 48 Tracer_core_3_INTD Tracer sliding time window interrupt for individual core 49 Tracer_DDR_INTD Tracer sliding time window interrupt for DDR3 EMIF1 50 Tracer_MSMC_0_INTD Tracer sliding time window interrupt for MSMC SRAM Bank0 176 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com INTC2 Event Inputs (Secondary Events for TPCC1 and TPCC2) (Part 3 of 5) Input Event # on INTC System Interrupt Description 51 Tracer_MSMC_1_INTD Tracer sliding time window interrupt for MSMC SRAM Bank1 52 Tracer_MSMC_2_INTD Tracer sliding time window interrupt for MSMC SRAM Bank2 53 Tracer_MSMC_3_INTD Tracer sliding time window interrupt for MSMC SRAM Bank3 54 Tracer_CFG_INTD Tracer sliding time window interrupt for CFG0 SCR 55 Tracer_QM_SS_CFG_INTD Tracer sliding time window interrupt for QM_SS CFG 56 Tracer_QM_SS_DMA_INTD Tracer sliding time window interrupt for QM_SS Slave port 57 Tracer_SEM_INTD Tracer sliding time window interrupt for Semaphore 58 SEMERR0 Semaphore interrupt 59 SEMERR1 Semaphore interrupt 60 SEMERR2 Semaphore interrupt 61 SEMERR3 Semaphore interrupt 62 BOOTCFG_INTD BOOTCFG Interrupt BOOTCFG_ERR and BOOTCFG_PROT 63 PASS_INT_CDMA_0 PASS Interrupt for CDMA Starvation 64 MPU0_INTD (MPU0_ADDR_ERR_INT and MPU0_PROT_ERR_INT combined) MPU0 Addressing violation interrupt and Protection violation interrupt. 65 MSMC_scrub_cerror Correctable (1-bit) soft error detected during scrub cycle 66 MPU1_INTD (MPU1_ADDR_ERR_INT and MPU1_PROT_ERR_INT combined) MPU1 Addressing violation interrupt and Protection violation interrupt. 67 RapidIO_INT_CDMA_0 RapidIO Interrupt for CDMA Starvation 68 MPU2_INTD (MPU2_ADDR_ERR_INT and MPU2_PROT_ERR_INT combined) MPU2 Addressing violation interrupt and Protection violation interrupt. 69 QM_INT_CDMA_0 QM Interrupt for CDMA Starvation 70 MPU3_INTD (MPU3_ADDR_ERR_INT and MPU3_PROT_ERR_INT combined) MPU3 Addressing violation interrupt and Protection violation interrupt. 71 QM_INT_CDMA_1 QM Interrupt for CDMA Starvation 72 MSMC_dedc_cerror Correctable (1-bit) soft error detected on SRAM read 73 MSMC_dedc_nc_error Non-correctable (2-bit) soft error detected on SRAM read 74 MSMC_scrub_nc_error Non-correctable (2-bit) soft error detected during scrub cycle 75 Reserved 76 MSMC_mpf_error0 Memory protection fault indicators for each system master PrivID 77 MSMC_mpf_error1 Memory protection fault indicators for each system master PrivID 78 MSMC_mpf_error2 Memory protection fault indicators for each system master PrivID 79 MSMC_mpf_error3 Memory protection fault indicators for each system master PrivID 80 MSMC_mpf_error4 Memory protection fault indicators for each system master PrivID 81 MSMC_mpf_error5 Memory protection fault indicators for each system master PrivID 82 MSMC_mpf_error6 Memory protection fault indicators for each system master PrivID 83 MSMC_mpf_error7 Memory protection fault indicators for each system master PrivID 84 MSMC_mpf_error8 Memory protection fault indicators for each system master PrivID 85 MSMC_mpf_error9 Memory protection fault indicators for each system master PrivID 86 MSMC_mpf_error10 Memory protection fault indicators for each system master PrivID 87 MSMC_mpf_error11 Memory protection fault indicators for each system master PrivID 88 MSMC_mpf_error12 Memory protection fault indicators for each system master PrivID 89 MSMC_mpf_error13 Memory protection fault indicators for each system master PrivID 90 MSMC_mpf_error14 Memory protection fault indicators for each system master PrivID 91 MSMC_mpf_error15 Memory protection fault indicators for each system master PrivID Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 177 ADVANCE INFORMATION Table 7-33 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-33 www.ti.com INTC2 Event Inputs (Secondary Events for TPCC1 and TPCC2) (Part 4 of 5) Input Event # on INTC System Interrupt Description ADVANCE INFORMATION 92 Reserved 93 INTDST0 RapidIO Interrupt 94 INTDST1 RapidIO Interrupt 95 INTDST2 RapidIO Interrupt 96 INTDST3 RapidIO Interrupt 97 INTDST4 RapidIO Interrupt 98 INTDST5 RapidIO Interrupt 99 INTDST6 RapidIO Interrupt 100 INTDST7 RapidIO Interrupt 101 INTDST8 RapidIO Interrupt 102 INTDST9 RapidIO Interrupt 103 INTDST10 RapidIO Interrupt 104 INTDST11 RapidIO Interrupt 105 INTDST12 RapidIO Interrupt 106 INTDST13 RapidIO Interrupt 107 INTDST14 RapidIO Interrupt 108 INTDST15 RapidIO Interrupt 109 INTDST16 RapidIO Interrupt 110 INTDST17 RapidIO Interrupt 111 INTDST18 RapidIO Interrupt 112 INTDST19 RapidIO Interrupt 113 INTDST20 RapidIO Interrupt 114 INTDST21 RapidIO Interrupt 115 INTDST22 RapidIO Interrupt 116 INTDST23 RapidIO Interrupt 117 EASYNCERR EMIF16 Error Interrupt 118 TETBHFULLINT4 TETB is half full 119 TETBFULLINT4 TETB is full 120 TETBACQINT4 Acquisition has been completed 121 TETBHFULLINT5 TETB is half full 122 TETBFULLINT5 TETB is full 123 TETBACQINT5 Acquisition has been completed 124 TETBHFULLINT6 TETB is half full 125 TETBFULLINT6 TETB is full 126 TETBACQINT6 Acquisition has been completed 127 TETBHFULLINT7 TETB is half full 128 TETBFULLINT7 TETB is full 129 TETBACQINT7 Acquisition has been completed 130 Reserved 131 Reserved 132 Reserved 133 Reserved 134 SEMERR4 Semaphore error interrupt 135 SEMERR5 Semaphore error interrupt 178 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com INTC2 Event Inputs (Secondary Events for TPCC1 and TPCC2) (Part 5 of 5) Input Event # on INTC System Interrupt Description 136 SEMERR6 Semaphore error interrupt 137 SEMERR7 Semaphore error interrupt 138 QM_INT_HIGH_0 QM interrupt 139 QM_INT_HIGH_1 QM interrupt 140 QM_INT_HIGH_2 QM interrupt 141 QM_INT_HIGH_3 QM interrupt 142 QM_INT_HIGH_4 QM interrupt 143 QM_INT_HIGH_5 QM interrupt ADVANCE INFORMATION Table 7-33 End of Table 7-33 Table 7-34 INTC3 Event Inputs (Secondary Events for TPCC0 and HyperLink) (Part 1 of 2) Input Event # on INTC System Interrupt Description 0 GPINT0 GPIO Interrupt 1 GPINT1 GPIO Interrupt 2 GPINT2 GPIO Interrupt 3 GPINT3 GPIO Interrupt 4 GPINT4 GPIO Interrupt 5 GPINT5 GPIO Interrupt 6 GPINT6 GPIO Interrupt 7 GPINT7 GPIO Interrupt 8 GPINT8 GPIO Interrupt 9 GPINT9 GPIO Interrupt 10 GPINT10 GPIO Interrupt 11 GPINT11 GPIO Interrupt 12 GPINT12 GPIO Interrupt 13 GPINT13 GPIO Interrupt 14 GPINT14 GPIO Interrupt 15 GPINT15 GPIO Interrupt 16 TETBHFULLINT TETB is half full 17 TETBFULLINT TETB is full 18 TETBACQINT Acquisition has been completed 19 TETBHFULLINT0 TETB is half full 20 TETBFULLINT0 TETB is full 21 TETBACQINT0 Acquisition has been completed 22 TETBHFULLINT1 TETB is half full 23 TETBFULLINT1 TETB is full 24 TETBACQINT1 Acquisition has been completed 25 TETBHFULLINT2 TETB is half full 26 TETBFULLINT2 TETB is full 27 TETBACQINT2 Acquisition has been completed 28 TETBHFULLINT3 TETB is half full 29 TETBFULLINT3 TETB is full 30 TETBACQINT3 Acquisition has been completed 31 Tracer_core_0_INTD Tracer sliding time window interrupt for individual core Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 179 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-34 www.ti.com INTC3 Event Inputs (Secondary Events for TPCC0 and HyperLink) (Part 2 of 2) Input Event # on INTC System Interrupt Description 32 Tracer_core_1_INTD Tracer sliding time window interrupt for individual core 33 Tracer_core_2_INTD Tracer sliding time window interrupt for individual core 34 Tracer_core_3_INTD Tracer sliding time window interrupt for individual core 35 Tracer_DDR_INTD Tracer sliding time window interrupt for DDR3 EMIF1 36 Tracer_MSMC_0_INTD Tracer sliding time window interrupt for MSMC SRAM Bank0 37 Tracer_MSMC_1_INTD Tracer sliding time window interrupt for MSMC SRAM Bank1 38 Tracer_MSMC_2_INTD Tracer sliding time window interrupt for MSMC SRAM Bank2 ADVANCE INFORMATION 39 Tracer_MSMC_3_INTD Tracer sliding time window interrupt for MSMC SRAM Bank3 40 Tracer_CFG_INTD Tracer sliding time window interrupt for CFG0 SCR 41 Tracer_QM_SS_CFG_INTD Tracer sliding time window interrupt for QM_SS CFG 42 Tracer_QM_SS_DMA_INTD Tracer sliding time window interrupt for QM_SS Slave port 43 Tracer_SEM_INTD Tracer sliding time window interrupt for Semaphore 44 vusr_int_o HyperLink Interrupt 45 TETBHFULLINT4 TETB is half full 46 TETBFULLINT4 TETB is full 47 TETBACQINT4 Acquisition has been completed 48 TETBHFULLINT5 TETB is half full 49 TETBFULLINT5 TETB is full 50 TETBACQINT5 Acquisition has been completed 51 TETBHFULLINT6 TETB is half full 52 TETBFULLINT6 TETB is full 53 TETBACQINT6 Acquisition has been completed 54 TETBHFULLINT7 TETB is half full 55 TETBFULLINT7 TETB is full 56 TETBACQINT7 Acquisition has been completed 57 Reserved 58 Reserved 59 Reserved 60 Reserved 61 DDR3_ERR DDR3 EMIF Error interrupt 62 po_vp_smpsack_intr Indicating that Volt_Proc receives the r-edge at its smpsack input. End of Table 7-34 7.5.2 INTC Registers This section includes the offsets for INTC registers. The base addresses for interrupt control registers are INTC0 0x0260 0000, INTC1 - 0x0260 4000, INTC2 - 0x0260 8000, and INTC3 - 0x0260 C000INTC0 - 0x0260 0000, INTC1 - 0x0260 4000 7.5.2.1 INTC0/INTC1 Register Map Table 7-35 INTC0/INTC1 Register Address Offset Register Mnemonic Register Name 0x0 REVISION_REG Revision Register 0x4 CONTROL_REG Control Register 0xc HOST_CONTROL_REG Host Control Register 180 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com INTC0/INTC1 Register Address Offset Register Mnemonic Register Name 0x10 GLOBAL_ENABLE_HINT_REG Global Host Int Enable Register 0x20 STATUS_SET_INDEX_REG Status Set Index Register 0x24 STATUS_CLR_INDEX_REG Status Clear Index Register 0x28 ENABLE_SET_INDEX_REG Enable Set Index Register 0x2c ENABLE_CLR_INDEX_REG Enable Clear Index Register 0x34 HINT_ENABLE_SET_INDEX_REG Host Int Enable Set Index Register 0x38 HINT_ENABLE_CLR_INDEX_REG Host Int Enable Clear Index Register 0x200 RAW_STATUS_REG0 Raw Status Register 0 0x204 RAW_STATUS_REG1 Raw Status Register 1 0x208 RAW_STATUS_REG2 Raw Status Register 2 0x20c RAW_STATUS_REG3 Raw Status Register 3 0x210 RAW_STATUS_REG4 Raw Status Register 4 0x280 ENA_STATUS_REG0 Enabled Status Register 0 0x284 ENA_STATUS_REG1 Enabled Status Register 1 0x288 ENA_STATUS_REG2 Enabled Status Register 2 0x28c ENA_STATUS_REG3 Enabled Status Register 3 0x290 ENA_STATUS_REG4 Enabled Status Register 4 0x300 ENABLE_REG0 Enable Register 0 0x304 ENABLE_REG1 Enable Register 1 0x308 ENABLE_REG2 Enable Register 2 0x30c ENABLE_REG3 Enable Register 3 0x310 ENABLE_REG4 Enable Register 4 0x380 ENABLE_CLR_REG0 Enable Clear Register 0 0x384 ENABLE_CLR_REG1 Enable Clear Register 1 0x388 ENABLE_CLR_REG2 Enable Clear Register 2 0x38c ENABLE_CLR_REG3 Enable Clear Register 3 0x390 ENABLE_CLR_REG4 Enable Clear Register 4 0x400 CH_MAP_REG0 Interrupt Channel Map Register for 0 to 0+3 0x404 CH_MAP_REG1 Interrupt Channel Map Register for 4 to 4+3 0x408 CH_MAP_REG2 Interrupt Channel Map Register for 8 to 8+3 0x40c CH_MAP_REG3 Interrupt Channel Map Register for 12 to 12+3 0x410 CH_MAP_REG4 Interrupt Channel Map Register for 16 to 16+3 0x414 CH_MAP_REG5 Interrupt Channel Map Register for 20 to 20+3 0x418 CH_MAP_REG6 Interrupt Channel Map Register for 24 to 24+3 0x41c CH_MAP_REG7 Interrupt Channel Map Register for 28 to 28+3 0x420 CH_MAP_REG8 Interrupt Channel Map Register for 32 to 32+3 0x424 CH_MAP_REG9 Interrupt Channel Map Register for 36 to 36+3 0x428 CH_MAP_REG10 Interrupt Channel Map Register for 40 to 40+3 0x42c CH_MAP_REG11 Interrupt Channel Map Register for 44 to 44+3 0x430 CH_MAP_REG12 Interrupt Channel Map Register for 48 to 48+3 0x434 CH_MAP_REG13 Interrupt Channel Map Register for 52 to 52+3 0x438 CH_MAP_REG14 Interrupt Channel Map Register for 56 to 56+3 0x43c CH_MAP_REG15 Interrupt Channel Map Register for 60 to 60+3 0x440 CH_MAP_REG16 Interrupt Channel Map Register for 64 to 64+3 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications ADVANCE INFORMATION Table 7-35 181 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-35 www.ti.com INTC0/INTC1 Register ADVANCE INFORMATION Address Offset Register Mnemonic Register Name 0x444 CH_MAP_REG17 Interrupt Channel Map Register for 68 to 68+3 0x448 CH_MAP_REG18 Interrupt Channel Map Register for 72 to 72+3 0x44c CH_MAP_REG19 Interrupt Channel Map Register for 76 to 76+3 0x450 CH_MAP_REG20 Interrupt Channel Map Register for 80 to 80+3 0x454 CH_MAP_REG21 Interrupt Channel Map Register for 84 to 84+3 0x458 CH_MAP_REG22 Interrupt Channel Map Register for 88 to 88+3 0x45c CH_MAP_REG23 Interrupt Channel Map Register for 92 to 92+3 0x460 CH_MAP_REG24 Interrupt Channel Map Register for 96 to 96+3 0x464 CH_MAP_REG25 Interrupt Channel Map Register for 100 to 100+3 0x468 CH_MAP_REG26 Interrupt Channel Map Register for 104 to 104+3 0x46c CH_MAP_REG27 Interrupt Channel Map Register for 108 to 108+3 0x470 CH_MAP_REG28 Interrupt Channel Map Register for 112 to 112+3 0x474 CH_MAP_REG29 Interrupt Channel Map Register for 116 to 116+3 0x478 CH_MAP_REG30 Interrupt Channel Map Register for 120 to 120+3 0x47c CH_MAP_REG31 Interrupt Channel Map Register for 124 to 124+3 0x480 CH_MAP_REG32 Interrupt Channel Map Register for 128 to 128+3 0x484 CH_MAP_REG33 Interrupt Channel Map Register for 132 to 132+3 0x488 CH_MAP_REG34 Interrupt Channel Map Register for 136 to 136+3 0x48c CH_MAP_REG35 Interrupt Channel Map Register for 140 to 140+3 0x490 CH_MAP_REG36 Interrupt Channel Map Register for 144 to 144+3 0x494 CH_MAP_REG37 Interrupt Channel Map Register for 148 to 148+3 0x498 CH_MAP_REG38 Interrupt Channel Map Register for 152 to 152+3 0x49c CH_MAP_REG39 Interrupt Channel Map Register for 156 to 156+3 0x800 HINT_MAP_REG0 Host Interrupt Map Register for 0 to 0+3 0x804 HINT_MAP_REG1 Host Interrupt Map Register for 4 to 4+3 0x808 HINT_MAP_REG2 Host Interrupt Map Register for 8 to 8+3 0x80c HINT_MAP_REG3 Host Interrupt Map Register for 12 to 12+3 0x810 HINT_MAP_REG4 Host Interrupt Map Register for 16 to 16+3 0x814 HINT_MAP_REG5 Host Interrupt Map Register for 20 to 20+3 0x818 HINT_MAP_REG6 Host Interrupt Map Register for 24 to 24+3 0x81c HINT_MAP_REG7 Host Interrupt Map Register for 28 to 28+3 0x820 HINT_MAP_REG8 Host Interrupt Map Register for 32 to 32+3 0x824 HINT_MAP_REG9 Host Interrupt Map Register for 36 to 36+3 0x828 HINT_MAP_REG10 Host Interrupt Map Register for 40 to 40+3 0x82c HINT_MAP_REG11 Host Interrupt Map Register for 44 to 44+3 0x830 HINT_MAP_REG12 Host Interrupt Map Register for 48 to 48+3 0x834 HINT_MAP_REG13 Host Interrupt Map Register for 52 to 52+3 0x838 HINT_MAP_REG14 Host Interrupt Map Register for 56 to 56+3 0x83c HINT_MAP_REG15 Host Interrupt Map Register for 60 to 60+3 0x840 HINT_MAP_REG16 Host Interrupt Map Register for 64 to 64+3 0x844 HINT_MAP_REG17 Host Interrupt Map Register for 68 to 68+3 0x848 HINT_MAP_REG18 Host Interrupt Map Register for 72 to 72+3 0x1500 ENABLE_HINT_REG0 Host Int Enable Register 0 182 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-35 INTC0/INTC1 Register Address Offset Register Mnemonic Register Name 0x1504 ENABLE_HINT_REG1 Host Int Enable Register 1 0x1508 ENABLE_HINT_REG2 Host Int Enable Register 2 End of Table 7-35 7.5.2.2 INTC2 Register Map INTC2 Register Address Offset Register Mnemonic Register Name 0x0 REVISION_REG Revision Register 0x10 GLOBAL_ENABLE_HINT_REG Global Host Int Enable Register 0x20 STATUS_SET_INDEX_REG Status Set Index Register 0x24 STATUS_CLR_INDEX_REG Status Clear Index Register 0x28 ENABLE_SET_INDEX_REG Enable Set Index Register 0x2c ENABLE_CLR_INDEX_REG Enable Clear Index Register 0x34 HINT_ENABLE_SET_INDEX_REG Host Int Enable Set Index Register 0x38 HINT_ENABLE_CLR_INDEX_REG Host Int Enable Clear Index Register 0x200 RAW_STATUS_REG0 Raw Status Register 0 0x204 RAW_STATUS_REG1 Raw Status Register 1 0x208 RAW_STATUS_REG2 Raw Status Register 2 0x20c RAW_STATUS_REG3 Raw Status Register 3 0x210 RAW_STATUS_REG4 Raw Status Register 4 0x280 ENA_STATUS_REG0 Enabled Status Register 0 0x284 ENA_STATUS_REG1 Enabled Status Register 1 0x288 ENA_STATUS_REG2 Enabled Status Register 2 0x28c ENA_STATUS_REG3 Enabled Status Register 3 0x290 ENA_STATUS_REG4 Enabled Status Register 4 0x300 ENABLE_REG0 Enable Register 0 0x304 ENABLE_REG1 Enable Register 1 0x308 ENABLE_REG2 Enable Register 2 0x30c ENABLE_REG3 Enable Register 3 0x310 ENABLE_REG4 Enable Register 4 0x380 ENABLE_CLR_REG0 Enable Clear Register 0 0x384 ENABLE_CLR_REG1 Enable Clear Register 1 0x388 ENABLE_CLR_REG2 Enable Clear Register 2 0x38c ENABLE_CLR_REG3 Enable Clear Register 3 0x390 ENABLE_CLR_REG4 Enable Clear Register 4 0x400 CH_MAP_REG0 Interrupt Channel Map Register for 0 to 0+3 0x404 CH_MAP_REG1 Interrupt Channel Map Register for 4 to 4+3 0x408 CH_MAP_REG2 Interrupt Channel Map Register for 8 to 8+3 0x40c CH_MAP_REG3 Interrupt Channel Map Register for 12 to 12+3 0x410 CH_MAP_REG4 Interrupt Channel Map Register for 16 to 16+3 0x414 CH_MAP_REG5 Interrupt Channel Map Register for 20 to 20+3 0x418 CH_MAP_REG6 Interrupt Channel Map Register for 24 to 24+3 0x41c CH_MAP_REG7 Interrupt Channel Map Register for 28 to 28+3 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications ADVANCE INFORMATION Table 7-36 183 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-36 www.ti.com INTC2 Register ADVANCE INFORMATION Address Offset Register Mnemonic Register Name 0x420 CH_MAP_REG8 Interrupt Channel Map Register for 32 to 32+3 0x424 CH_MAP_REG9 Interrupt Channel Map Register for 36 to 36+3 0x428 CH_MAP_REG10 Interrupt Channel Map Register for 40 to 40+3 0x42c CH_MAP_REG11 Interrupt Channel Map Register for 44 to 44+3 0x430 CH_MAP_REG12 Interrupt Channel Map Register for 48 to 48+3 0x434 CH_MAP_REG13 Interrupt Channel Map Register for 52 to 52+3 0x438 CH_MAP_REG14 Interrupt Channel Map Register for 56 to 56+3 0x43c CH_MAP_REG15 Interrupt Channel Map Register for 60 to 60+3 0x440 CH_MAP_REG16 Interrupt Channel Map Register for 64 to 64+3 0x444 CH_MAP_REG17 Interrupt Channel Map Register for 68 to 68+3 0x448 CH_MAP_REG18 Interrupt Channel Map Register for 72 to 72+3 0x44c CH_MAP_REG19 Interrupt Channel Map Register for 76 to 76+3 0x450 CH_MAP_REG20 Interrupt Channel Map Register for 80 to 80+3 0x454 CH_MAP_REG21 Interrupt Channel Map Register for 84 to 84+3 0x458 CH_MAP_REG22 Interrupt Channel Map Register for 88 to 88+3 0x45c CH_MAP_REG23 Interrupt Channel Map Register for 92 to 92+3 0x460 CH_MAP_REG24 Interrupt Channel Map Register for 96 to 96+3 0x464 CH_MAP_REG25 Interrupt Channel Map Register for 100 to 100+3 0x468 CH_MAP_REG26 Interrupt Channel Map Register for 104 to 104+3 0x46c CH_MAP_REG27 Interrupt Channel Map Register for 108 to 108+3 0x470 CH_MAP_REG28 Interrupt Channel Map Register for 112 to 112+3 0x474 CH_MAP_REG29 Interrupt Channel Map Register for 116 to 116+3 0x478 CH_MAP_REG30 Interrupt Channel Map Register for 120 to 120+3 0x47c CH_MAP_REG31 Interrupt Channel Map Register for 124 to 124+3 0x480 CH_MAP_REG32 Interrupt Channel Map Register for 128 to 128+3 0x484 CH_MAP_REG33 Interrupt Channel Map Register for 132 to 132+3 0x488 CH_MAP_REG34 Interrupt Channel Map Register for 136 to 136+3 0x48c CH_MAP_REG35 Interrupt Channel Map Register for 140 to 140+3 0x490 CH_MAP_REG36 Interrupt Channel Map Register for 144 to 144+3 0x494 CH_MAP_REG37 Interrupt Channel Map Register for 148 to 148+3 0x498 CH_MAP_REG38 Interrupt Channel Map Register for 152 to 152+3 0x49c CH_MAP_REG39 Interrupt Channel Map Register for 156 to 156+3 0x800 HINT_MAP_REG0 Host Interrupt Map Register for 0 to 0+3 0x804 HINT_MAP_REG1 Host Interrupt Map Register for 4 to 4+3 0x808 HINT_MAP_REG2 Host Interrupt Map Register for 8 to 8+3 0x80c HINT_MAP_REG3 Host Interrupt Map Register for 12 to 12+3 0x810 HINT_MAP_REG4 Host Interrupt Map Register for 16 to 16+3 0x814 HINT_MAP_REG5 Host Interrupt Map Register for 20 to 20+3 0x818 HINT_MAP_REG6 Host Interrupt Map Register for 24 to 24+3 0x81c HINT_MAP_REG7 Host Interrupt Map Register for 28 to 28+3 0x820 HINT_MAP_REG8 Host Interrupt Map Register for 32 to 32+3 0x824 HINT_MAP_REG9 Host Interrupt Map Register for 36 to 36+3 0x828 HINT_MAP_REG10 Host Interrupt Map Register for 40 to 40+3 0x82c HINT_MAP_REG11 Host Interrupt Map Register for 44 to 44+3 184 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-36 INTC2 Register Address Offset Register Mnemonic Register Name 0x830 HINT_MAP_REG12 Host Interrupt Map Register for 48 to 48+3 0x1500 ENABLE_HINT_REG0 Host Int Enable Register 0 0x1504 ENABLE_HINT_REG1 Host Int Enable Register 1 End of Table 7-36 End of Table 7-36 End of Table 7-36 7.5.2.3 INTC3 Register Map INTC3 Register Address Offset Register Mnemonic Register Name 0x0 REVISION_REG Revision Register 0x10 GLOBAL_ENABLE_HINT_REG Global Host Int Enable Register 0x20 STATUS_SET_INDEX_REG Status Set Index Register 0x24 STATUS_CLR_INDEX_REG Status Clear Index Register 0x28 ENABLE_SET_INDEX_REG Enable Set Index Register 0x2c ENABLE_CLR_INDEX_REG Enable Clear Index Register 0x34 HINT_ENABLE_SET_INDEX_REG Host Int Enable Set Index Register 0x38 HINT_ENABLE_CLR_INDEX_REG Host Int Enable Clear Index Register 0x200 RAW_STATUS_REG0 Raw Status Register 0 0x204 RAW_STATUS_REG1 Raw Status Register 1 0x280 ENA_STATUS_REG0 Enabled Status Register 0 0x284 ENA_STATUS_REG1 Enabled Status Register 1 0x300 ENABLE_REG0 Enable Register 0 0x304 ENABLE_REG1 Enable Register 1 0x380 ENABLE_CLR_REG0 Enable Clear Register 0 0x384 ENABLE_CLR_REG1 Enable Clear Register 1 0x400 CH_MAP_REG0 Interrupt Channel Map Register for 0 to 0+3 0x404 CH_MAP_REG1 Interrupt Channel Map Register for 4 to 4+3 0x408 CH_MAP_REG2 Interrupt Channel Map Register for 8 to 8+3 0x40c CH_MAP_REG3 Interrupt Channel Map Register for 12 to 12+3 0x410 CH_MAP_REG4 Interrupt Channel Map Register for 16 to 16+3 0x414 CH_MAP_REG5 Interrupt Channel Map Register for 20 to 20+3 0x418 CH_MAP_REG6 Interrupt Channel Map Register for 24 to 24+3 0x41c CH_MAP_REG7 Interrupt Channel Map Register for 28 to 28+3 0x420 CH_MAP_REG8 Interrupt Channel Map Register for 32 to 32+3 0x424 CH_MAP_REG9 Interrupt Channel Map Register for 36 to 36+3 0x428 CH_MAP_REG10 Interrupt Channel Map Register for 40 to 40+3 0x42c CH_MAP_REG11 Interrupt Channel Map Register for 44 to 44+3 0x430 CH_MAP_REG12 Interrupt Channel Map Register for 48 to 48+3 0x434 CH_MAP_REG13 Interrupt Channel Map Register for 52 to 52+3 0x438 CH_MAP_REG14 Interrupt Channel Map Register for 56 to 56+3 0x43c CH_MAP_REG15 Interrupt Channel Map Register for 60 to 60+3 0x800 HINT_MAP_REG0 Host Interrupt Map Register for 0 to 0+3 0x804 HINT_MAP_REG1 Host Interrupt Map Register for 4 to 4+3 0x808 HINT_MAP_REG2 Host Interrupt Map Register for 8 to 8+3 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications ADVANCE INFORMATION Table 7-37 185 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-37 www.ti.com INTC3 Register ADVANCE INFORMATION Address Offset Register Mnemonic Register Name 0x80c HINT_MAP_REG3 Host Interrupt Map Register for 12 to 12+3 0x810 HINT_MAP_REG4 Host Interrupt Map Register for 16 to 16+3 0x814 HINT_MAP_REG5 Host Interrupt Map Register for 20 to 20+3 0x818 HINT_MAP_REG6 Host Interrupt Map Register for 24 to 24+3 0x81c HINT_MAP_REG7 Host Interrupt Map Register for 28 to 28+3 0x820 HINT_MAP_REG8 Host Interrupt Map Register for 32 to 32+3 0x824 HINT_MAP_REG9 Host Interrupt Map Register for 36 to 36+3 0x1500 ENABLE_HINT_REG0 Host Int Enable Register 0 0x1504 ENABLE_HINT_REG1 Host Int Enable Register 1 End of Table 7-37 7.5.3 Inter-Processor Register Map Table 7-38 IPC Generation Registers (IPCGRx) (Part 1 of 2) Address Start Address End Size Register Name Description 0x02620200 0x02620203 4B NMIGR0 NMI Event Generation Register for Core 0 0x02620204 0x02620207 4B NMIGR1 NMI Event Generation Register for Core 1 0x02620208 0x0262020B 4B NMIGR2 NMI Event Generation Register for Core 2 0x0262020C 0x0262020F 4B NMIGR3 NMI Event Generation Register for Core 3 0x02620210 0x02620213 4B Reserved Reserved 0x02620214 0x02620217 4B Reserved Reserved 0x02620218 0x0262021B 4B Reserved Reserved 0x0262021C 0x0262021F 4B Reserved Reserved 0x02620220 0x0262023F 32B Reserved Reserved 0x02620240 0x02620243 4B IPCGR0 IPC Generation Register for Core 0 0x02620244 0x02620247 4B IPCGR1 IPC Generation Register for Core 1 0x02620248 0x0262024B 4B IPCGR2 IPC Generation Register for Core 2 0x0262024C 0x0262024F 4B IPCGR3 IPC Generation Register for Core 3 0x02620250 0x02620253 4B IPCGR4 IPC Generation Register for Core 4 0x02620254 0x02620257 4B IPCGR5 IPC Generation Register for Core 5 0x02620258 0x0262025B 4B IPCGR6 IPC Generation Register for Core 6 0x0262025C 0x0262025F 4B IPCGR7 IPC Generation Register for Core 7 0x02620240 0x02620243 4B IPCGR0 IPC Generation Register for Core 0 0x02620244 0x02620247 4B IPCGR1 IPC Generation Register for Core 1 0x02620248 0x0262024B 4B IPCGR2 IPC Generation Register for Core 2 0x0262024C 0x0262024F 4B IPCGR3 IPC Generation Register for Core 3 0x02620250 0x02620253 4B Reserved Reserved 0x02620254 0x02620257 4B Reserved Reserved 0x02620258 0x0262025B 4B Reserved Reserved 0x0262025C 0x0262025F 4B Reserved Reserved 0x02620260 0x0262027B 28B Reserved Reserved 0x0262027C 0x0262027F 4B IPCGRH IPC Generation Register for Host 0x02620280 0x02620283 4B IPCAR0 IPC Acknowledgement Register for Core 0 0x02620284 0x02620287 4B IPCAR1 IPC Acknowledgement Register for Core 1 0x02620288 0x0262028B 4B IPCAR2 IPC Acknowledgement Register for Core 2 0x0262028C 0x0262028F 4B IPCAR3 IPC Acknowledgement Register for Core 3 186 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-38 IPC Generation Registers (IPCGRx) (Part 2 of 2) Address Start Address End Size Register Name Description 0x02620290 0x02620293 4B Reserved Reserved 0x02620294 0x02620297 4B Reserved Reserved 0x02620298 0x0262029B 4B Reserved Reserved 0x0262029C 0x0262029F 4B Reserved Reserved 0x026202A0 0x026202BB 28B Reserved Reserved 0x026202BC 0x026202BF 4B IPCARH IPC Acknowledgement Register for Host 7.5.4 External Interrupts Electrical Data/Timing Table 7-39 NMI and Local Reset Timing Requirements (1) (see Figure 7-13) No. Min Max Unit 1 tsu(LRESETz-LRESETNMIENzL) Setup Time - LRESETz valid before LRESETNMIENz low TBD μs 1 tsu(NMIz-LRESETNMIENzL) Setup Time - NMIz valid before LRESETNMIENz low TBD μs 1 tsu(CORESELn-LRESETNMIENzL) Setup Time - CORESEL[2:0] valid before LRESETNMIENz low TBD μs 2 th(LRESETNMIENzL-LRESETz) Hold Time - LRESETz valid after LRESETNMIENz low TBD μs 2 th(LRESETNMIENzL-NMIz) Hold Time - NMIz valid after LRESETNMIENz low TBD μs 2 th(LRESETNMIENzL-CORESELn) Hold Time - CORESEL[2:0] valid after LRESETNMIENz low TBD μs 3 tw(LRESETNMIENz) Pulse Width - LRESETNMIENz low width TBD μs 4 tc(LRESETNMIENzL-LRESETNMIENzL) Cycle Time - time between LRESETNMIENz low TBD μs End of Table 7-39 1 P = 1/CPU clock frequency in ns. For example, when running parts at 1000 MHz, use P = 1 ns. Figure 7-13 NMI and Local Reset Timing 1 2 CORESEL[3:0]/ LRESETz/ NMIz 3 LRESETNMIENz 4 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 187 ADVANCE INFORMATION End of Table 7-38 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.6 MPU The C6674 supports four MPUs: • One MPU is used to protect main CORE/3 CFG SCR (CFG space of all slave devices on the SCR is protected by the MPU). • Two MPUs are used for QM_SS (one for DATA PORT port and another is for CFG PORT port). • One MPU is used for Semaphore. This section contains MPU register map and details of device-specific MPU registers only. For MPU features and details of generic MPU registers, see the Memory Protection Unit (MPU) for KeyStone Devices User Guide (literature number SPRUGW5). ADVANCE INFORMATION The following tables show the configuration of each MPU and the memory regions protected by each MPU. Table 7-40 MPU Default Configuration MPU0 Main CFG SCR Setting MPU1 (QM_SS DATA PORT) MPU2 (QM_SS CFG PORT) MPU3 Semaphore Default permission Assume allowed Assume allowed Assume allowed Assume allowed Number of allowed IDs supported 16 16 16 16 Number of programmable ranges supported 16 4 16 1 Compare width 1KB granularity 1KB granularity 1KB granularity 1KB granularity Start Address End Address End of Table 7-40 Table 7-41 MPU Memory Regions Memory Protection MPU0 Main CFG SCR 0x01D00000 0x026203FF MPU1 QM_SS DATA PORT 0x34000000 0x340BFFFF MPU2 QM_SS CFG PORT 0x02A00000 0x02ABFFFF MPU3 Semaphore 0x02640000 0x026407FF End of Table 7-41 Table 7-42 shows the privilege ID of each CORE and every mastering peripheral. Table 7-42 also shows the privilege level (supervisor vs. user), security level (secure vs. non-secure), and access type (instruction read vs. data/DMA read or write) of each master on the device. In some cases, a particular setting depends on software being executed at the time of the access or the configuration of the master peripheral. Table 7-42 Device Master Settings (Part 1 of 2) Master Privilege ID Privilege Level Security Level Access Type CORE0 0 SW dependant, driven by MSMC SW dependant DMA CORE1 1 SW dependant, driven by MSMC SW dependant DMA CORE2 2 SW dependant, driven by MSMC SW dependant DMA CORE3 3 SW dependant, driven by MSMC SW dependant DMA CORE4 4 SW dependant, driven by MSMC SW dependant DMA CORE5 5 SW dependant, driven by MSMC SW dependant DMA CORE6 6 SW dependant, driven by MSMC SW dependant DMA CORE7 7 SW dependant, driven by MSMC SW dependant DMA PA_SS 8 User Non-secure DMA SRIO_CPPI 9 User Non-secure DMA 188 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Device Master Settings (Part 2 of 2) Master Privilege ID Privilege Level SRIO_M 9 Driven by SRIO block, User mode and supervisor mode is determined on a Non-secure per-transaction basis. Only the transaction with source ID matching the value in SupervisorID register is granted supervisor mode. Security Level Access Type DMA QM_CDMA/QM_second 10 User Non-secure DMA PCIe 11 Supervisor Non-secure DMA DAP 12 Driven by debug_SS Driven by debug_SS DMA Reserved 13 Supervisor Non-secure DMA Reserved 14 Supervisor Non-secure DMA TSIP0/1 15 User Non-secure DMA ADVANCE INFORMATION Table 7-42 End of Table 7-42 7.6.1 MPU Registers This section includes the offsets for MPU registers and definitions for device specific MPU registers. 7.6.1.1 MPU Register Map Table 7-43 MPU0 Registers (Part 1 of 2) Offset Name Description 0h REVID Revision ID 4h CONFIG Configuration 10h IRAWSTAT Interrupt raw status/set 14h IENSTAT Interrupt enable status/clear 18h IENSET Interrupt enable 1Ch IENCLR Interrupt enable clear 20h EOI End of interrupt 200h PROG1_MPSAR Programmable range 1, start address 204h PROG1_MPEAR Programmable range 1, end address 208h PROG1_MPPA Programmable range 1, memory page protection attributes 210h PROG2_MPSAR Programmable range 2, start address 214h PROG2_MPEAR Programmable range 2, end address 218h PROG2_MPPA Programmable range 2, memory page protection attributes 220h PROG3_MPSAR Programmable range 3, start address 224h PROG3_MPEAR Programmable range 3, end address 228h PROG3_MPPA Programmable range 3, memory page protection attributes 230h PROG4_MPSAR Programmable range 4, start address 234h PROG4_MPEAR Programmable range 4, end address 238h PROG4_MPPA Programmable range 4, memory page protection attributes 240h PROG5_MPSAR Programmable range 5, start address 244h PROG5_MPEAR Programmable range 5, end address 248h PROG5_MPPA Programmable range 5, memory page protection attributes 250h PROG6_MPSAR Programmable range 6, start address 254h PROG6_MPEAR Programmable range 6, end address 258h PROG6_MPPA Programmable range 6, memory page protection attributes 260h PROG7_MPSAR Programmable range 7, start address Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 189 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-43 www.ti.com MPU0 Registers (Part 2 of 2) ADVANCE INFORMATION Offset Name Description 264h PROG7_MPEAR Programmable range 7, end address 268h PROG7_MPPA Programmable range 7, memory page protection attributes 270h PROG8_MPSAR Programmable range 8, start address 274h PROG8_MPEAR Programmable range 8, end address 278h PROG8_MPPA Programmable range 8, memory page protection attributes 280h PROG9_MPSAR Programmable range 9, start address 284h PROG9_MPEAR Programmable range 9, end address 288h PROG9_MPPA Programmable range 9, memory page protection attributes 290h PROG10_MPSAR Programmable range 10, start address 294h PROG10_MPEAR Programmable range 10, end address 298h PROG10_MPPA Programmable range 10, memory page protection attributes 2A0h PROG11_MPSAR Programmable range 11, start address 2A4h PROG11_MPEAR Programmable range 11, end address 2A8h PROG11_MPPA Programmable range 11, memory page protection attributes 2B0h PROG12_MPSAR Programmable range 12, start address 2B4h PROG12_MPEAR Programmable range 12, end address 2B8h PROG12_MPPA Programmable range 12, memory page protection attributes 2C0h PROG13_MPSAR Programmable range 13, start address 2C4h PROG13_MPEAR Programmable range 13, end address 2C8h PROG13_MPPA Programmable range 13, memory page protection attributes 2D0h PROG14_MPSAR Programmable range 14, start address 2D4h PROG14_MPEAR Programmable range 14, end address 2Dh PROG14_MPPA Programmable range 14, memory page protection attributes 2E0h PROG15_MPSAR Programmable range 15, start address 2E4h PROG15_MPEAR Programmable range 15, end address 2E8h PROG15_MPPA Programmable range 15, memory page protection attributes 2F0h PROG16_MPSAR Programmable range 16, start address 2F4h PROG16_MPEAR Programmable range 16, end address 2F8h PROG16_MPPA Programmable range 16, memory page protection attributes 300h FLTADDRR Fault address 304h FLTSTAT Fault status 308h FLTCLR Fault clear End of Table 7-43 Table 7-44 MPU1 Registers (Part 1 of 2) Offset Name Description 0h REVID Revision ID 4h CONFIG Configuration 10h IRAWSTAT Interrupt raw status/set 14h IENSTAT Interrupt enable status/clear 18h IENSET Interrupt enable 1Ch IENCLR Interrupt enable clear 20h EOI End of interrupt 190 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com MPU1 Registers (Part 2 of 2) Offset Name Description 200h PROG1_MPSAR Programmable range 1, start address 204h PROG1_MPEAR Programmable range 1, end address 208h PROG1_MPPA Programmable range 1, memory page protection attributes 210h PROG2_MPSAR Programmable range 2, start address 214h PROG2_MPEAR Programmable range 2, end address 218h PROG2_MPPA Programmable range 2, memory page protection attributes 220h PROG3_MPSAR Programmable range 3, start address 224h PROG3_MPEAR Programmable range 3, end address 228h PROG3_MPPA Programmable range 3, memory page protection attributes 230h PROG4_MPSAR Programmable range 4, start address 234h PROG4_MPEA Programmable range 4, end address 238h PROG4_MPPA Programmable range 4, memory page protection attributes 300h FLTADDRR Fault address 304h FLTSTAT Fault status 308h FLTCLR Fault clear ADVANCE INFORMATION Table 7-44 End of Table 7-44 Table 7-45 MPU2 Registers (Part 1 of 2) Offset Name Description 0h REVID Revision ID 4h CONFIG Configuration 10h IRAWSTAT Interrupt raw status/set 14h IENSTAT Interrupt enable status/clear 18h IENSET Interrupt enable 1Ch IENCLR Interrupt enable clear 20h EOI End of interrupt 200h PROG1_MPSAR Programmable range 1, start address 204h PROG1_MPEAR Programmable range 1, end address 208h PROG1_MPPA Programmable range 1, memory page protection attributes 210h PROG2_MPSAR Programmable range 2, start address 214h PROG2_MPEAR Programmable range 2, end address 218h PROG2_MPPA Programmable range 2, memory page protection attributes 220h PROG3_MPSAR Programmable range 3, start address 224h PROG3_MPEAR Programmable range 3, end address 228h PROG3_MPPA Programmable range 3, memory page protection attributes 230h PROG4_MPSAR Programmable range 4, start address 234h PROG4_MPEAR Programmable range 4, end address 238h PROG4_MPPA Programmable range 4, memory page protection attributes 240h PROG5_MPSAR Programmable range 5, start address 244h PROG5_MPEAR Programmable range 5, end address 248h PROG5_MPPA Programmable range 5, memory page protection attributes 250h PROG6_MPSAR Programmable range 6, start address 254h PROG6_MPEAR Programmable range 6, end address Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 191 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-45 www.ti.com MPU2 Registers (Part 2 of 2) Offset Name Description 258h PROG6_MPPA Programmable range 6, memory page protection attributes 260h PROG7_MPSAR Programmable range 7, start address 264h PROG7_MPEAR Programmable range 7, end address 268h PROG7_MPPA Programmable range 7, memory page protection attributes 270h PROG8_MPSAR Programmable range 8, start address ADVANCE INFORMATION 274h PROG8_MPEAR Programmable range 8, end address 278h PROG8_MPPA Programmable range 8, memory page protection attributes 280h PROG9_MPSAR Programmable range 9, start address 284h PROG9_MPEAR Programmable range 9, end address 288h PROG9_MPPA Programmable range 9, memory page protection attributes 290h PROG10_MPSAR Programmable range 10, start address 294h PROG10_MPEAR Programmable range 10, end address 298h PROG10_MPPA Programmable range 10, memory page protection attributes 2A0h PROG11_MPSAR Programmable range 11, start address 2A4h PROG11_MPEAR Programmable range 11, end address 2A8h PROG11_MPPA Programmable range 11, memory page protection attributes 2B0h PROG12_MPSAR Programmable range 12, start address 2B4h PROG12_MPEAR Programmable range 12, end address 2B8h PROG12_MPPA Programmable range 12, memory page protection attributes 2C0h PROG13_MPSAR Programmable range 13, start address 2C4h PROG13_MPEAR Programmable range 13, end address 2C8h PROG13_MPPA Programmable range 13, memory page protection attributes 2D0h PROG14_MPSAR Programmable range 14, start address 2D4h PROG14_MPEAR Programmable range 14, end address 2Dh PROG14_MPPA Programmable range 14, memory page protection attributes 2E0h PROG15_MPSAR Programmable range 15, start address 2E4h PROG15_MPEAR Programmable range 15, end address 2E8h PROG15_MPPA Programmable range 15, memory page protection attributes 2F0h PROG16_MPSAR Programmable range 16, start address 2F4h PROG16_MPEAR Programmable range 16, end address 2F8h PROG16_MPPA Programmable range 16, memory page protection attributes 300h FLTADDRR Fault address 304h FLTSTAT Fault status 308h FLTCLR Fault clear End of Table 7-45 Table 7-46 Offset MPU3 Registers (Part 1 of 2) Name Description 0h REVID Revision ID 4h CONFIG Configuration 10h IRAWSTAT Interrupt raw status/set 14h IENSTAT Interrupt enable status/clear 18h IENSET Interrupt enable 192 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com MPU3 Registers (Part 2 of 2) Offset Name Description 1Ch IENCLR Interrupt enable clear 20h EOI End of interrupt 200h PROG1_MPSAR Programmable range 1, start address 204h PROG1_MPEAR Programmable range 1, end address 208h PROG1_MPPA Programmable range 1, memory page protection attributes 300h FLTADDRR Fault address 304h FLTSTAT Fault status 308h FLTCLR Fault clear End of Table 7-46 7.6.1.2 Device-Specific MPU Registers 7.6.1.2.1 Configuration Register (CONFIG) The configuration register (CONFIG) contains the configuration value of the MPU. Figure 7-14 Configuration Register (CONFIG) 31 MPU0 24 23 20 19 16 15 12 11 1 0 ADDR_WIDTH NUM_FIXED NUM_PROG NUM_AIDS Reserved ASSUME_ALLOWED R-0 R-0 R-4 R-16 R-0 R-1 MPU1 R-16 MPU2 R-1 MPU3 R-16 Reset Values Legend: R = Read only; -n = value after reset Table 7-47 Configuration Register (CONFIG) Field Descriptions Bits Field Description 31 – 24 ADDR_WIDTH Address alignment for range checking 0 = 1KB alignment 6 = 64KB alignment 23 – 20 NUM_FIXED Number of fixed address ranges 19 – 16 NUM_PROG Number of programmable address ranges 15 – 12 NUM_AIDS Number of supported AIDs 11 – 1 Reserved Reserved. These bits will always reads as 0. 0 ASSUME_ALLOWED Assume allowed bit. When an address is not covered by any MPU protection range, this bit determines whether the transfer is assumed to be allowed or not. 0 = Assume disallowed 1 = Assume allowed 7.6.2 MPU Programmable Range Registers 7.6.2.1 Programmable Range n Start Address Register (PROGn_MPSAR) The programmable address start register holds the start address for the range. This register is writeable by a supervisor entity only. If NS = 0 (non-secure mode) in the associated MPPA register, then the register is also writeable only by a secure entity. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 193 ADVANCE INFORMATION Table 7-46 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com The start address must be aligned on a page boundary. The size of the page is 1K byte. The size of the page determines the width of the address field in MPSAR and MPEAR. Figure 7-15 Programmable Range n Start Address Register (PROGn_MPSAR) 31 10 9 0 START_ADDR Reserved R/W R Legend: R = Read only; R/W = Read/Write Table 7-48 ADVANCE INFORMATION Register Register 0 Register 1 Register 2 Register 3 Register 4 Register 5 Register 6 Register 7 Register 8 Register 9 Register 10 Register 11 Register 12 Register 13 Register 14 Register 15 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU0) Bits Name Reset Value Range Description 31 – 10 START_ADDR 0x7400 Programmable Start address for range 0. Programmable Start address for range 1. Programmable Start address for range 2. Programmable Start address for range 3. Programmable Start address for range 4. Programmable Start address for range 5. Programmable Start address for range 6. Programmable Start address for range 7. Programmable Start address for range 8. Programmable Start address for range 9. Programmable Start address for range 10. Programmable Start address for range 11. Programmable Start address for range 12. Programmable Start address for range 13. Programmable Start address for range 14. Programmable Start address for range 15. 9–0 Reserved 000h 31 – 10 START_ADDR 0x7C00 9–0 Reserved 000h 31 – 10 START_ADDR 0x8000 9–0 Reserved 000h 31 – 10 START_ADDR 0x7800 9–0 Reserved 000h 31 – 10 START_ADDR 0x8700 9–0 Reserved 000h 31 – 10 START_ADDR 0x87C0 9–0 Reserved 000h 31 – 10 START_ADDR 0x8800 9–0 Reserved 000h 31 – 10 START_ADDR 0x8C40 9–0 Reserved 000h 31 – 10 START_ADDR 0x8C80 9–0 Reserved 000h 31 – 10 START_ADDR 0x8CC0 9–0 Reserved 000h 31 – 10 START_ADDR 0x8D40 9–0 Reserved 000h 31 – 10 START_ADDR 0x9000 9–0 Reserved 000h 31 – 10 START_ADDR 0x9400 9–0 Reserved 000h 31 – 10 START_ADDR 0x94C0 9–0 Reserved 000h 31 – 10 START_ADDR 0x9800 9–0 Reserved 000h 31 – 10 START_ADDR 0x9880 9–0 Reserved 000h Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. End of Table 7-48 194 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU1) Register Bits Register 0 Register 1 Register 2 Register 3 Register 4 Register 5 Name Reset Value Range Description Programmable Start address for range 0. 31 – 10 START_ADDR 0xD0000 9–0 Reserved 000h 31 – 10 START_ADDR 0xD0080 9–0 Reserved 000h 31 – 10 START_ADDR 0xD0180 9–0 Reserved 000h 31 – 10 START_ADDR 0xD01A0 9–0 Reserved 000h 31 – 10 START_ADDR 0xD02E0 9–0 Reserved 000h 31 – 10 START_ADDR 0xD0200 9–0 Reserved 000h Reserved, these bits always read as 0. Programmable Start address for range 1. Reserved, these bits always read as 0. Programmable Start address for range 2. Reserved, these bits always read as 0. Programmable Start address for range 3. Reserved, these bits always read as 0. Programmable ADVANCE INFORMATION Table 7-49 Start address for range 4. Reserved, these bits always read as 0. Programmable Start address for range 5. Reserved, these bits always read as 0. End of Table 7-49 Table 7-50 Register Register 0 Register 1 Register 2 Register 3 Register 4 Register 5 Register 6 Register 7 Register 8 Register 9 Register 10 Register 11 Register 12 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU2) (Part 1 of 2) Bits Name Reset Value Range Description 31 – 10 START_ADDR 0xA800 Programmable Start address for range 0. 9–0 Reserved 000h 31 – 10 START_ADDR 0xA880 9–0 Reserved 000h 31 – 10 START_ADDR 0xA900 9–0 Reserved 000h 31 – 10 START_ADDR 0xA980 9–0 Reserved 000h 31 – 10 START_ADDR 0xA9A0 9–0 Reserved 000h 31 – 10 START_ADDR 0xA9A4 9–0 Reserved 000h 31 – 10 START_ADDR 0xA9A8 9–0 Reserved 000h 31 – 10 START_ADDR 0xA9AC 9–0 Reserved 000h 31 – 10 START_ADDR 0xA9B0 9–0 Reserved 000h 31 – 10 START_ADDR 0xA9B8 9–0 Reserved 000h 31 – 10 START_ADDR 0xAA00 9–0 Reserved 000h 31 – 10 START_ADDR 0xAA40 9–0 Reserved 000h 31 – 10 START_ADDR 0xAA80 9–0 Reserved 000h Copyright 2010 Texas Instruments Incorporated Reserved, these bits always read as 0. Programmable Start address for range 1. Reserved, these bits always read as 0. Programmable Start address for range 2. Reserved, these bits always read as 0. Programmable Start address for range 3. Reserved, these bits always read as 0. Programmable Start address for range 4. Reserved, these bits always read as 0. Programmable Start address for range 5. Reserved, these bits always read as 0. Programmable Start address for range 6. Reserved, these bits always read as 0. Programmable Start address for range 7. Reserved, these bits always read as 0. Programmable Start address for range 8. Reserved, these bits always read as 0. Programmable Start address for range 9. Reserved, these bits always read as 0. Programmable Start address for range 10. Reserved, these bits always read as 0. Programmable Start address for range 11. Reserved, these bits always read as 0. Programmable Start address for range 12. Reserved, these bits always read as 0. TMS320C6674 Peripheral Information and Electrical Specifications 195 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-50 www.ti.com Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU2) (Part 2 of 2) Register Register 13 Register 14 Register 15 Bits Name Reset Value Range Description 31 – 10 START_ADDR 0xAAA0 Programmable Start address for range 13. Programmable Start address for range 14. Programmable Start address for range 15. 9–0 Reserved 000h 31 – 10 START_ADDR 0xAAD0 9–0 Reserved 000h 31 – 10 START_ADDR 0xAAE0 9–0 Reserved 000h Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. End of Table 7-50 ADVANCE INFORMATION Table 7-51 Register Register 0 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions (MPU3) Bits Name 31 – 16 START_ADDR 9–0 Reserved R/W (1) Reset Value Range Description R/W 9900h Programmable Start address for range 0. R 000h Reserved, these bits always read as 0. End of Table 7-51 1 R = Read only; W = Write only, R/W = Read/Write 7.6.2.2 Programmable Range n - End Address Register (PROGn_MPEAR) The programmable address end register holds the end address for the range. This register is writeable by a supervisor entity only. If NS = 0 (non-secure mode) in the associated MPPA register then the register is also only writeable by a secure entity. The end address must be aligned on a page boundary. The size of the page depends on the MPU number. The page size for MPU1 is 1K byte and for MPU2 it is 64K bytes. The size of the page determines the width of the address field in MPSAR and MPEAR Figure 7-16 Programmable Range n End Address Register (PROGn_MPEAR) 31 10 9 0 END_ADDR Reserved R/W R Legend: R = Read only; R/W = Read/Write Table 7-52 Register Register 0 Register 1 Register 2 Register 3 Register 4 Register 5 196 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU0) Bits Name Reset Value Range Description 31 – 10 END_ADDR 0x7620 Programmable End address for range 0. Programmable End address for range 1. Programmable End address for range 2. Programmable End address for range 3. Programmable End address for range 4. Programmable End address for range 5. 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x7DFF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x827F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x7AFF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x8783 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x87DF 9–0 Reserved 3FFh Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. TMS320C6674 Peripheral Information and Electrical Specifications Reserved, these bits always read as 0. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Register Register 6 Register 7 Register 8 Register 9 Register 10 Register 11 Register 12 Register 13 Register 14 Register 15 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU0) Bits Name Reset Value Range Description 31 – 10 END_ADDR 0x8BC0 Programmable End address for range 6. Programmable End address for range 7. Programmable End address for range 8. Programmable End address for range 9. Programmable End address for range 10. Programmable End address for range 11. Programmable End address for range 12. Programmable End address for range 13. Programmable End address for range 14. Programmable End address for range 15. 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x8C40 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x8C80 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x8CC0 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x8D43 9–0 Reserved 3FFh 31 – 10 END_ADDR 92CF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x9480 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x9500 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x983F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0x9881 9–0 Reserved 3FFh Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. ADVANCE INFORMATION Table 7-52 Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. Reserved, these bits always read as 0. End of Table 7-52 Table 7-53 Register Register 0 Register 1 Register 2 Register 3 Register 4 Register 5 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU1) Bits Name Reset Value Range Programmable 31 – 10 END_ADDR 0xD007F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xD017F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xD019F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xD02DF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xD02FF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xD02FF 9–0 Reserved 3FFh Description End address for range 0. Reserved, these bits always read as 0. Programmable End address for range 1. Reserved, these bits always read as 0. Programmable End address for range 2. Reserved, these bits always read as 0. Programmable End address for range 3. Reserved, these bits always read as 0. Programmable End address for range 4. Reserved, these bits always read as 0. Programmable End address for range 5. Reserved, these bits always read as 0. End of Table 7-53 Table 7-54 Register Register 0 Register 1 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU2) (Part 1 of 2) Bits Name Reset Value Range 31 – 10 9–0 31 – 10 END_ADDR 0xA87F Programmable Reserved 3FFh END_ADDR 0xA8FF Copyright 2010 Texas Instruments Incorporated Description End address for range 0. Reserved, these bits always read as 0. Programmable End address for range 1. TMS320C6674 Peripheral Information and Electrical Specifications 197 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-54 Register Register 2 Register 3 Register 4 ADVANCE INFORMATION Register 5 Register 6 Register 7 Register 8 Register 9 Register 10 Register 11 Register 12 Register 13 Register 14 Register 15 www.ti.com Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU2) (Part 2 of 2) Bits Name Reset Value 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA97F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA99F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA9A3 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA9A7 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA9AB 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA9AF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA9B7 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xA9BF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xAA3F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xAA7F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xAA9F 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xAACF 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xAADE 9–0 Reserved 3FFh 31 – 10 END_ADDR 0xAAFF 9–0 Reserved 3FFh Range Description Reserved, these bits always read as 0. Programmable End address for range 2. Reserved, these bits always read as 0. Programmable End address for range 3. Reserved, these bits always read as 0. Programmable End address for range 4. Reserved, these bits always read as 0. Programmable End address for range 5. Reserved, these bits always read as 0. Programmable End address for range 6. Reserved, these bits always read as 0. Programmable End address for range 7. Reserved, these bits always read as 0. Programmable End address for range 8. Reserved, these bits always read as 0. Programmable End address for range 9. Reserved, these bits always read as 0. Programmable End address for range 10. Reserved, these bits always read as 0. Programmable End address for range 11. Reserved, these bits always read as 0. Programmable End address for range 12. Reserved, these bits always read as 0. Programmable End address for range 13. Reserved, these bits always read as 0. Programmable End address for range 14. Reserved, these bits always read as 0. Programmable End address for range 15. Reserved, these bits always read as 0. End of Table 7-54 Table 7-55 Register Register 0 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions (MPU3) Bits Name Reset Value Range Description 31 – 16 END_ADDR 9901h Programmable End address for range 0. 9–0 Reserved 3FFh Programmable Reserved, these bits always read as 0. End of Table 7-55 198 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.6.2.3 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) The programmable address memory protection page attribute register holds the permissions for the region. This register is writeable only by a non-debug supervisor entity. If NS = 0 (secure mode) then the register is also only writeable by a non-debug secure entity. The NS bit is only writeable by a non-debug secure entity. For debug accesses the register is writeable only when NS = 1 or EMU = 1. Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) 31 26 25 24 23 22 21 20 19 18 17 16 15 Reserved AID15 AID14 AID13 AID12 AID11 AID10 AID9 AID8 AID7 AID6 AID5 R R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 AID4 AID3 AID2 AID1 AID0 AIDX Reserved NS EMU SR SW SX UR UW UX R/W R/W R/W R/W R/W R/W R R/W R/W R/W R/W R/W R/W R/W R/W Legend: R = Read only; R/W = Read/Write Table 7-56 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) Field Descriptions (Part 1 of 2) Bits Name Description 31 – 26 Reserved Reserved. These bits will always reads as 0. 25 AID15 Controls access from ID = 15 0 = Access denied. 1 = Access granted. 24 AID14 Controls access from ID = 14 0 = Access denied. 1 = Access granted. 23 AID13 Controls access from ID = 13 0 = Access denied. 1 = Access granted. 22 AID12 Controls access from ID = 12 0 = Access denied. 1 = Access granted. 21 AID11 Controls access from ID = 11 0 = Access denied. 1 = Access granted. 20 AID10 Controls access from ID = 10 0 = Access denied. 1 = Access granted. 19 AID9 Controls access from ID = 9 0 = Access denied. 1 = Access granted. 18 AID8 Controls access from ID = 8 0 = Access denied. 1 = Access granted. 17 AID7 Controls access from ID = 7 0 = Access denied. 1 = Access granted. 16 AID6 Controls access from ID = 6 0 = Access denied. 1 = Access granted. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 199 ADVANCE INFORMATION Figure 7-17 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-56 www.ti.com Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) Field Descriptions (Part 2 of 2) ADVANCE INFORMATION Bits Name Description 15 AID5 Controls access from ID = 5 0 = Access denied. 1 = Access granted. 14 AID4 Controls access from ID = 4 0 = Access denied. 1 = Access granted. 13 AID3 Controls access from ID = 3 0 = Access denied. 1 = Access granted. 12 AID2 Controls access from ID = 2 0 = Access denied. 1 = Access granted. 11 AID1 Controls access from ID = 1 0 = Access denied. 1 = Access granted. 10 AID0 Controls access from ID = 0 0 = Access denied. 1 = Access granted. 9 AIDX Controls access from ID > 15 0 = Access denied. 1 = Access granted. 8 Reserved Always reads as 0. 7 NS Non-secure access permission 0 = Only secure access allowed. 1 = Non-secure access allowed. 6 EMU Emulation (debug) access permission. This bit is ignored if NS = 1 0 = Debug access not allowed. 1 = Debug access allowed. 5 SR Supervisor Read permission 0 = Access not allowed. 1 = Access allowed. 4 SW Supervisor Write permission 0 = Access not allowed. 1 = Access allowed. 3 SX Supervisor Execute permission 0 = Access not allowed. 1 = Access allowed. 2 UR User Read permission 0 = Access not allowed. 1 = Access allowed 1 UW User Write permission 0 = Access not allowed. 1 = Access allowed. 0 UX User Execute permission 0 = Access not allowed. 1 = Access allowed. End of Table 7-561 200 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) Reset Values Register MPU0 MPU1 MPU2 MPU3 Register 0 0X0003_FCB6 0X03FF_FC80 0x03FF_FCA4 0X0003_FCB6 Register 1 0X0003_FC80 0X0003_FCB6 0X0003_FCB6 N/A Register 2 0X0003_FCB6 0X0003_FCB4 0X0003_FCB6 N/A Register 3 0X0003_FCB6 0X0003_FC80 0X0003_FCB4 N/A Register 4 0X0003_FC80 0X0003_FCB6 0X0003_FCB4 N/A Register 5 0X0003_FC80 N/A 0X0003_FCB4 N/A Register 6 0X0003_FCB6 N/A 0X0003_FCB4 N/A Register 7 0X0003_FCB4 N/A 0X0003_FCB4 N/A Register 8 0X0003_FCB4 N/A 0X0003_FCB4 N/A Register 9 0X0003_FCB4 N/A 0X0003_FCB4 N/A Register 10 0X0003_FCB4 N/A 0X0003_FCA4 N/A Register 11 0X0003_FCB6 N/A 0X0003_FCB4 N/A Register 12 0X0003_FCB4 N/A 0X0003_FCB4 N/A Register 13 0X0003_FCB6 N/A 0X0003_FCB4 N/A Register 14 0X0003_FCB4 N/A 0X0003_FCB4 N/A Register 15 0X0003_FCB4 N/A 0X0003_FCB6 N/A ADVANCE INFORMATION Table 7-57 End of Table 7-57 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 201 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.7 Reset Controller The reset controller detects the different type of resets supported on the TMS320C6674 device and manages the distribution of those resets throughout the device. The device has several types of resets: • Power-on reset • Hard reset • Soft reset • CPU local reset ADVANCE INFORMATION Table 7-58 explains further the types of reset, the reset initiator, and the effects of each reset on the device. For more information on the effects of each reset on the PLL controllers and their clocks, see Section ‘‘Reset Electrical Data / Timing’’ on page 205 • Table 7-58 Reset Types Reset Type Initiator POR (Power On Reset) POR pin active low RESETFULL pin active low Hard Reset RESET pin active low Emulation PLLCTL register (RSCTRL) Watchdog Timers Soft Reset RESET pin active low PLLCTL register (RSCTRL) Watchdog Timers C66x CorePac local reset Software (through LPSC MMR) Watchdog Timers LRESET pin Effect on Device When Reset Occurs RESETSTAT Pin Status Toggles RESETSTAT pin Total reset of the chip. Everything on the device is reset to its default state in response to this. Activates the POR signal on chip, which is used to reset test/emu logic. Boot configurations are latched. ROM boot process is initiated. Resets everything except for test/emu logic and Reset Isolation modules. Emulator and Reset Isolation modules stay alive during this reset. This reset is also different from POR in that the PLLCTL assumes power and clocks are stable when Device Reset is asserted. Boot configurations are not latched. ROM boot process is initiated. Toggles RESETSTAT pin Software can program these initiators to be hard or soft. Hard reset is the default, but can be programmed to be Soft reset. Soft Reset will behave like Hard Reset except that PCIe MMRs,EMIF16 MMRs, DDR3 EMIF MMRs, and External Memory contents are retained. Boot configurations are not latched. ROM boot process is initiated. Toggles RESETSTAT pin MMR bit in LPSC controls C66x CorePac local reset. Used by Watchdog Does not toggle RESETSTAT pin Timers (in the event of a timeout) to reset C66x CorePac. Can also be initiated by LRESET device pin. C66x CorePac memory system and Slave DMA port are still alive when C66x CorePac is in local reset. Provides a local reset of the C66x CorePac, without destroying clock alignment or memory contents. Does not initiate ROM boot process. End of Table 7-58 7.7.1 Power-on Reset Power-on reset is used to reset the entire device, including the test and emulation logic. Power-on reset is initiated by the following 1. POR pin 2. RESETFULL pin During power-up, the POR pin must be asserted (driven low) until the power supplies have reached their normal operating conditions. A RESETFULL pin is also provided to allow the on-board host to reset the entire device including the reset isolated logic. The assumption is that, device is already powered up and hence unlike POR, RESETFULL pin will be driven by the on-board host control other than the power good circuitry. For power-on reset, the Main PLL controller comes up in bypass mode and the PLL is not enabled. Other resets do not affect the state of the PLL or the dividers in the PLL controller. 202 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 The following sequence must be followed during a power-on reset: 1. Wait for all power supplies to reach normal operating conditions while keeping the POR pin asserted (driven low). While POR is asserted, all pins except RESETSTAT will be set to high-impedance. After the POR pin is de-asserted (driven high), all Z group pins, low group pins, and high group pins are set to their reset state and will remain at their reset state until otherwise configured by their respective peripheral. All peripherals that are power managed, are disabled after a Power-on Reset and must be enabled through the Device State Control registers (for more details, see Section Table 3-2 ‘‘Device State Control Registers’’ on page 62). 2. Clocks are reset, and they are propagated throughout the chip to reset any logic that was using reset synchronously. All logic is now reset and RESETSTAT will be driven low indicating that the device is in reset. 3. POR must be held active until all supplies on the board are stable then for at least an additional time for the Chip level PLLs to lock. 4. The POR pin can now be de-asserted. Reset sampled pin values are latched at this point. The Chip level PLLs is taken out of reset and begins its locking sequence, and all power-on device initialization also begins. 5. After device initialization is complete, the RESETSTAT pin is de-asserted (driven high). By this time, DDR3 PLL has already completed its locking sequence and is outputting a valid clock. The system clocks of both PLL controllers are allowed to finish their current cycles and then paused for 10 cycles of their respective system reference clocks. After the pause, the system clocks are restarted at their default divide by settings. 6. The device is now out of reset and device execution begins as dictated by the selected boot mode. Note—To most of the device, reset is de-asserted only when the POR and RESET pins are both de-asserted (driven high). Therefore, in the sequence described above, if the RESET pin is held low past the low period of the POR pin, most of the device will remain in reset. The RESET pin should not be tied together with the POR pin. 7.7.2 Hard Reset A Hard reset will reset everything on the device except the PLLs, test, emulation logic and reset isolation modules. POR should also remain de-asserted during this time. Hard reset is initiated by the following • RESET pin • RSCTRL register in PLLCTL • Watchdog Timer • Emulation All the above initiators by default are configured to act as Hard reset. Except Emulation all the other 3 initiators can be configured as Soft resets in the RSCFG register in PLLCTL. The following sequence must be followed during a Hard reset: 1. The RESET pin is pulled active low for a minimum of 24 CLKIN1 cycles. During this time the RESET signal is able to propagate to all modules (except those specifically mentioned above). All I/O are Hi-Z for modules affected by RESET, to prevent off-chip contention during the warm reset. 2. Once all logic is reset, RESETSTAT is driven active to denote that the device is in reset. 3. The RESET pin can now be released. A minimal device initialization begins to occur. Note that configuration pins are not re-latched and clocking is unaffected within the device. 4. After device initialization is complete, the RESETSTAT pin is de-asserted (driven high). Note—The POR pin should be held inactive (high) throughout the warm reset sequence. Otherwise, if POR is activated (brought low), the minimum POR pulse width must be met. The RESET pin should not be tied together with the POR pin. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 203 ADVANCE INFORMATION www.ti.com TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.7.3 Soft Reset A soft reset will behave like a hard reset except that the PCIe MMRs and DDR3 EMIF MMRs contents are retained. POR should also remain de-asserted during this time. ADVANCE INFORMATION Soft reset is initiated by the following • RESET pin • RSCTRL register in PLLCTL • Watchdog Timer • Emulation All the above initiators by default are configured to act as Hard reset. Except Emulation all the other 3 initiators can be configured as Soft resets in the RSCFG register in PLLCTL. In the case of a soft reset, the clock logic or the power control logic of the peripherals are not affected, and, therefore, the enabled/disabled state of the peripherals is not affected. The following external memory contents are maintained during a soft reset: • DDR3 MMRs: The DDR3 Memory Controller registers are not reset. In addition, the DDR3 SDRAM memory content is retained if the user places the DDR3 SDRAM in self-refresh mode before invoking the soft reset. • PCIe MMRs: The contents of the memory connected to the EMIFA are retained. The EMIFA registers are not reset. During a soft reset, the following happens: 1. The RESETSTAT pin goes low to indicate an internal reset is being generated. The reset is allowed to propagate through the system. Internal system clocks are not affected. PLLs also remain locked. 2. After device initialization is complete, the RESETSTAT pin is deasserted (driven high). In addition, the PLL controllers pause their system clocks for about 8 cycles. At this point: › The state of the peripherals before the soft reset is not changed. › The I/O pins are controlled as dictated by the DEVSTAT register. › The DDR3 MMRs and PCIe MMRs retain their previous values. Only the DDR3 Memory Controller and PCIe state machines are reset by the soft reset. › The PLL controllers are operating in the mode prior to soft reset. System clocks are unaffected. The boot sequence is started after the system clocks are restarted. Since the configuration pins are not latched with a System Reset, the previous values, as shown in the DEVSTAT register, are used to select the boot mode. 204 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.7.4 Local Reset Local reset is initiated by the following (for more details see the Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2): • LRESET pin • Watchdog Timer should cause one of the below based on Reset Multiplex “ESTMUXn” register setting (See TBD for details): – Local Reset – NMI – NMI followed by a time delay and then a local reset for the core selected – Hard Reset by requesting reset via PLLCTL • LPSC MMRs 7.7.5 Reset Priority If any of the above reset sources occur simultaneously, the PLLCTL processes only the highest priority reset request. The reset request priorities are as follows (high to low): • Power-on reset • Hard/Soft reset 7.7.6 Reset Controller Register The reset controller register are part of the PLLCTL MMRs. All C6674 device-specific MMRs are covered in Section 7.8.4 ‘‘Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Electrical Data/Timing’’ on page 218. For more details on these registers and how to program them, see the Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2). 7.7.7 Reset Electrical Data / Timing Table 7-59 Reset Timing Requirements (1) (see Figure 7-18, Figure 7-19, Figure 7-20 and Figure 7-21) No. Min Max Unit Power-on-Reset 1 th(PORzL) Hold Time - POR low after VDDS15 Stable and Input Clocks Valid 500C + 100 μs 2 tsu(RESETzH-PORzH) Setup Time - RESET high before POR high 500C + 100 μs 2 tsu(RESETFULLzH-PORzH) Setup Time - RESETFULL high before POR high 500C + 100 μs 4 td(PORzH-RESETFULLzL) Delay Time - POR high before RESETFULL low 500C + 100 μs Full-Reset 5 tw(RESETFULLzL) Pulse Width - Pulse width RESETFULL low 500C + TBD μs 6 td(RESETzH-RESETFULLzL) Delay Time - RESET high before RESETFULL low 500C + 100 μs 4 td(PORzH-RESETzL) Delay Time - POR high before RESET low 500C + 100 μs Hard-Reset 9 tw(RESETzL) Pulse Width - Pulse width RESET low 500C + TBD μs 6 td(RESETFULLzH-RESETzL) Delay Time - RESETFULL high before RESET low 500C + 100 μs 12 td(PORzH-RESETzL) Delay Time - POR high before RESET low 500C + 100 μs 13 tw(RESETzL) Pulse Width - Pulse width RESET low 500C + TBD μs 14 td(RESETFULLzH-RESETzL) Delay Time - RESETFULL high before RESET low 500C + 100 μs Soft Reset End of Table 7-59 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 205 ADVANCE INFORMATION The local reset can be used to reset a particular CorePac without resetting any other chip components. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 1 C = 1 ÷ CORECLK(N|P) frequency in ns. Table 7-60 Reset Switching Characteristics Over Recommended Operating Conditions (see Figure 7-18, Figure 7-19, Figure 7-20 and Figure 7-21) No. Parameter Min Max Unit Power-on-Reset 3 td(PORzH-RESETSTATzH) Delay Time - RESETSTAT high after POR high TBD μs TBD μs TBD μs TBD μs Full-Reset 7 td(RESETFULLzH-RESETSTATzH) Delay Time - RESETSTAT high after RESETFULL high ADVANCE INFORMATION Hard Reset 11 td(RESETzH-RESETSTATzH) Delay Time - RESETSTAT high after RESET high 15 td(RESETzH-RESETSTATzH) Delay Time - RESETSTAT high after RESET high Soft Reset End of Table 7-60 Figure 7-18 Power-On Reset Timing 1 2 VDDS15 Stable + Clocks Valid (internal signal) POR RESET RESETFULL 3 RESETSTAT Figure 7-19 Full-Reset Timing 5 4 6 RESETFULL RESET 7 RESETSTAT POR 206 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-20 Hard-Reset Timing 9 8 10 RESET RESETFULL 11 ADVANCE INFORMATION RESETSTAT POR Figure 7-21 Soft-Reset Timing 13 12 14 RESET RESETFULL 15 RESETSTAT POR Table 7-61 Boot Configuration Timing Requirements (1) (See Figure 7-22) No. Min Max Unit 1 tsu(GPIOn-PORz) Setup Time - GPIO valid before POR asserted 12C ns 2 th(PORz-GPIOn) Hold Time - GPIO valid after POR asserted 12C ns End of Table 7-61 1 C = 1 ÷ CORECLK(N|P) frequency in ns. Figure 7-22 Boot Configuration Timing 1 POR GPIO[15:0]/ DONE 2 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 207 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com ADVANCE INFORMATION 208 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.8 Main PLL and PLL Controller This section provides a description of the Main PLL and the PLL controller. For details on the operation of the PLL controller module, see the Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2). The Main PLL is controlled by the standard PLL controller. The PLL controller manages the clock ratios, alignment, and gating for the system clocks to the device. Figure 7-23 shows a block diagram of the main PLL controller. The following paragraphs define the clocks and PLL controller parameters. Figure 7-23 Main PLL and PLL Controller Main PLL Controller xM /2 REFCLK CORECLK(P|N) Main PLL C66x CorePac /x SYSCLK2 /2 SYSCLK3 /3 SYSCLK4 /y SYSCLK5 /64 SYSCLK6 /6 SYSCLK7 To Switch Fabric, Peripherals, Accelerators /z SYSCLK8 /12 SYSCLK9 /3 SYSCLK10 /6 SYSCLK11 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 209 ADVANCE INFORMATION Note—The Main PLL controller registers can be accessed by any master in the device. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com The inputs, multiply factor within the PLL, and post-division for each of the chip-level clocks from the PLL output. The PLL controller also controls reset propagation through the chip, clock alignment, and test points. The PLL controller monitors the PLL status and provides an output signal indicating when the PLL is locked. Main PLL power is supplied externally via the Main PLL power-supply pin (AVDDA1). An external EMI filter circuit must be added to all PLL supplies. See the Hardware Design Guide for KeyStone Devices (literature number SPRABI2). for detailed recommendations. For the best performance, TI recommends that all the PLL external components be on a single side of the board without jumpers, switches, or components other than those shown. For reduced PLL jitter, maximize the spacing between switching signal traces and the PLL external components (C1, C2, and the EMI Filter). ADVANCE INFORMATION The minimum SYSCLK rise and fall times should also be observed. For the input clock timing requirements, see Section 7.8.4 ‘‘Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Electrical Data/Timing’’. CAUTION—The PLL controller module as described in the see the Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2) includes a superset of features, some of which are not supported on the TMS320C6674 device. The following sections describe the registers that are supported; it should be assumed that any registers not included in these sections is not supported by the device. Furthermore, only the bits within the registers described here are supported. Avoid writing to any reserved memory location or changing the value of reserved bits. 7.8.1 Main PLL Controller Device-Specific Information 7.8.1.1 Internal Clocks and Maximum Operating Frequencies The Main PLL, used to drive the CorePacs, the switch fabric, and a majority of the peripheral clocks (all but the DDR3 and the PASS modules) requires a PLL controller to manage the various clock divisions, gating, and synchronization. The Main PLL’s PLL controller has several SYSCLK outputs that are listed below, along with the clock description. Each SYSCLK has a corresponding divider that divides down the output clock of the PLL. Note that dividers are not programmable unless explicitly mentioned in the description below. • REFCLK: Full-rate clock for CorePac 0~CorePac 7. • SYSCLK2: 1/x-rate clock for CorePac (emulation) and the ADTF module. Default rate for this will be 1/3. This is programmable from /1 to /32, where this clock does not violate the max of 350 MHz. The SYSCLK2 can be turned off by software. • SYSCLK3: 1/2-rate clock used to clock the L2/MSMC, HyperLink, CPU/2 SCR, DDR EMIF and CPU/2 EDMA. • SYSCLK4: 1/3-rate clock for the switch fabrics and fast peripherals. The Debug_SS and ETBs will use this as well. • SYSCLK5: 1/y-rate clock for system trace module only. Default rate for this will be 1/5. It is configurable and the max configurable clock is 210 MHz and min configuration clock is 32 MHz. The SYSCLK5 can be turned off by software. • SYSCLK6: 1/64-rate clock. 1/64 rate clock (emif_ptv) used to clock the PVT compensated buffers for DDR3 EMIF. • SYSCLK7: 1/6-rate clock for slow peripherals and sources the SYSCLKOUT output pin. • SYSCLK8: 1/z-rate clock. This clock is used as slow_sysclck in the system. Default for this will be 1/64. This is programmable from /24 to /80. • SYSCLK9: 1/12-rate clock for SmartReflex. • SYSCLK10: 1/3-rate clock for SRIO only. • SYSCLK11: 1/6-rate clock for PSC only. Only SYSCLK2, SYSCLK5 and SYSCLK8 are programmable on TMS320C6674 device. 210 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Note—In case any of the other programmable SYSCLKs are set slower than 1/64 rate, then SYSCLK8 (SLOW_SYSCLK) needs to be programmed to either match, or be slower than, the slowest SYSCLK in the system. 7.8.1.2 Main PLL Controller Operating Modes All hosts must hold off accesses to the DSP while the frequency of its internal clocks is changing. A mechanism must be in place such that the DSP notifies the host when the PLL configuration has completed. 7.8.1.3 Main PLL Stabilization, Lock, and Reset Times The PLL stabilization time is the amount of time that must be allotted for the internal PLL regulators to become stable after device powerup. The PLL should not be operated until this stabilization time has expired. The PLL reset time is the amount of wait time needed when resetting the PLL (writing PLLRST = 1), in order for the PLL to properly reset, before bringing the PLL out of reset (writing PLLRST = 0). For the Main PLL reset time value, see Table 7-62. The PLL lock time is the amount of time needed from when the PLL is taken out of reset (PLLRST = 1 with PLLEN = 0) to when to when the PLL controller can be switched to PLL mode (PLLEN = 1). The Main PLL lock time is given in Table 7-62. Table 7-62 Main PLL Stabilization, Lock, and Reset Times Min PLL stabilization time Max 100 Unit μs 2000 × C (1) PLL lock time PLL reset time Typ 1000 ns End of Table 7-62 1 C = SYSCLK(N|P) cycle time in ns. 7.8.2 PLL Controller Memory Map The memory map of the PLL controller is shown in Table 7-63. TMS320C6674 specific PLL Controller register definitions can be found in the sections following the Table 7-63, for other registers in the table, see the Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2). CAUTION—Note that only registers documented here are accessible on the TMS320C6674. Other addresses in the PLL controller memory map including the reserved registers should not be modified. Furthermore, only the bits within the registers described here are supported. Avoid writing to any reserved memory location or changing the value of reserved bits. It is recommended to use read-modify-write sequence to make any changes to the valid bits in the register. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 211 ADVANCE INFORMATION The Main PLL controller has two modes of operation: bypass mode and PLL mode. The mode of operation is determined by the PLLEN bit of the PLL control register (PLLCTL). In PLL mode, REFCLK is generated from the PLL output using the divider POSTDIV and the PLL multiplier PLLM. In bypass mode, PLL output is fed directly to REFCLK. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-63 www.ti.com PLL Controller Registers (Including Reset Controller) Hex Address Range Acronym 0231 0000 - 0231 00E3 - Register Name Reserved 0231 00E4 RSTYPE Reset Type Status Register (Reset Controller) 0231 00E8 RSTCTRL Software Reset Control Register (Reset Controller) 0231 00EC RSTCFG Reset Configuration Register (Reset Controller) 0231 00F0 RSISO ADVANCE INFORMATION 0231 00F0 - 0231 00FF - 0231 0100 PLLCTL 0231 0104 - 0231 0108 SECCTL 0231 010C - 0231 0110 PLLM Reset isolation register(Reset Controller) Reserved PLL Control Register Reserved PLL Secondary Control Register Reserved PLL Multiplier Control Register 0231 0114 PREDIV PLL pre-divider control register 0231 0118 PLLDIV1 Reserved 0231 011C PLLDIV2 PLL controller divider 2 register 0231 0120 PLLDIV3 Reserved 0231 0124 - Reserved 0231 0128 POSTDIV PLL Post-Divider Register 0231 012C - 0231 0134 - 0231 0138 PLLCMD Reserved 0231 013C PLLSTAT PLL Controller Status Register 0231 0140 ALNCTL PLL Controller Clock Align Control Register 0231 0144 DCHANGE 0231 0148 CKEN Reserved 0231 014C CKSTAT Reserved 0231 0150 SYSTAT SYSCLK Status Register PLL Controller Command Register PLLDIV Ratio Change Status Register 0231 0154 - 0231 015C - Reserved 0231 0160 PLLDIV4 Reserved 0231 0164 PLLDIV5 PLL Controller Divider 5 Register 0231 0168 PLLDIV6 Reserved 0231 016C PLLDIV7 Reserved 0231 0170 PLLDIV8 PLL Controller Divider 8 Register 0231 0174 - 0231 0193 PLLDIV9 - PLLDIV16 Reserved 0231 0194 - 0231 01FF - Reserved End of Table 7-63 212 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.8.2.1 PLL Secondary Control Register (SECCTL) The PLL Secondary Control Register contains extra fields to control the Main PLL and is shown in Figure 7-24 and described in Table 7-64. Figure 7-24 PLL Secondary Control Register (SECCTL)) 31 24 23 Reserved BYPASS R-0000 0000 RW-0 22 21 20 19 18 OUTPUT_DIVIDE RW-0 RW-0 0 Reserved RW-0 RW-1 RW-001 0000 0000 0000 0000 Table 7-64 PLL Secondary Control Register (SECCTL) Field Descriptions Bit Field Description 31-24 Reserved Reserved 23 BYPASS 22-19 OUTPUT_DIVIDE Output Divider ratio bits. 0h = ÷1. Divide frequency by 1. 1h = ÷2. Divide frequency by 2. 2h = ÷3. Divide frequency by 3. 3h = ÷4. Divide frequency by 4. 4h - Fh = ÷5 to ÷16. Divide frequency by 5 to divide frequency by 80. 18-0 Reserved Reserved Main PLL Bypass Enable 0 = Main PLL Bypass disabled 1 = Main PLL Bypass enabled End of Table 7-64 7.8.2.2 PLL Controller Divider Register (PLLDIV2, PLLDIV5, PLLDIV8) The PLL controller divider registers (PLLDIV2, PLLDIV5, PLLDIV8) are shown in Figure 7-25 and described in Table 7-65. The default values of the RATIO field on a reset for PLLDIV2, PLLDIV5, and PLLDIV8 are different and mentioned in the footnote of Figure 7-25. Figure 7-25 PLL Controller Divider Register (PLLDIVn) 31 16 Reserved 15 Dn R-0 (1) 14 8 EN R/W-1 7 0 Reserved RATIO R-0 R/W-n (2) Legend: R/W = Read/Write; R = Read only; -n = value after reset 1 D2EN for PLLDIV2; D5EN for PLLDIV5; D8EN for PLLDIV8 2 n=02h for PLLDIV2; n=04h for PLLDIV5; n=3Fh for PLLDIV8 Table 7-65 PLL Controller Divider Register (PLLDIVn) Field Descriptions Bit Field Description 31-16 Reserved Reserved. 15 DnEN Divider Dn enable bit. (see footnote of Figure 7-25) 0 = Divider n is disabled. 1 = No clock output. Divider n is enabled. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 213 ADVANCE INFORMATION Legend: R/W = Read/Write; R = Read only; -n = value after reset TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-65 www.ti.com PLL Controller Divider Register (PLLDIVn) Field Descriptions Bit Field Description 14-8 Reserved Reserved. The reserved bit location is always read as 0. A value written to this field has no effect. 7-0 RATIO Divider ratio bits. (see footnote of Figure 7-25) 0h = ÷1. Divide frequency by 1. 1h = ÷2. Divide frequency by 2. 2h = ÷3. Divide frequency by 3. 3h = ÷4. Divide frequency by 4. 4h - 4Fh = ÷5 to ÷80. Divide frequency by 5 to divide frequency by 80. End of Table 7-65 ADVANCE INFORMATION 7.8.2.3 PLL Controller Clock Align Control Register (ALNCTL) The PLL controller clock align control register (ALNCTL) is shown in Figure 7-26 and described in Table 7-66. Figure 7-26 PLL Controller Clock Align Control Register (ALNCTL) 31 8 7 6 5 4 3 2 1 0 Reserved ALN8 Reserved ALN5 Reserved ALN2 Reserved R-0 R/W-1 R-0 R/W-1 R-0 R/W-1 R-0 Legend: R/W = Read/Write; R = Read only; -n = value after reset, for reset value Table 7-66 Bit PLL Controller Clock Align Control Register (ALNCTL) Field Descriptions Field Description Reserved Reserved. The reserved bit location is always read as 0. A value written to this field has no effect. 7 ALN8 4 ALN5 1 ALN2 SYSCLKn alignment. Do not change the default values of these fields. 0 = Do not align SYSCLKn to other SYSCLKs during GO operation. If SYSn in DCHANGE is set, SYSCLKn switches to the new ratio immediately after the GOSET bit in PLLCMD is set. 1 = Align SYSCLKn to other SYSCLKs selected in ALNCTL when the GOSET bit in PLLCMD is set and SYSn in DCHANGE is 1. The SYSCLKn rate is set to the ratio programmed in the RATIO bit in PLLDIVn. 31-8 6-5 3-2 0 End of Table 7-66 7.8.2.4 PLLDIV Divider Ratio Change Status Register (DCHANGE) Whenever a different ratio is written to the PLLDIVn registers, the PLLCTL flags the change in the DCHANGE status register. During the GO operation, the PLL controller will change only the divide ratio of the SYSCLKs with the bit set in DCHANGE. Note that the ALNCTL register determines if that clock also needs to be aligned to other clocks. The PLLDIV divider ratio change status register is shown in Figure 7-27 and described in Table 7-67. Figure 7-27 PLLDIV Divider Ratio Change Status Register (DCHANGE) 31 8 7 6 5 4 3 2 1 0 Reserved SYS8 Reserved SYS5 Reserved SYS2 Reserved R-0 R/W-0 R-0 R/W-0 R-0 R/W-0 R-0 Legend: R/W = Read/Write; R = Read only; -n = value after reset, for reset value 214 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-67 Bit PLLDIV Divider Ratio Change Status Register (DCHANGE) Field Descriptions Field Description Reserved Reserved. The reserved bit location is always read as 0. A value written to this field has no effect. 7 SYS8 4 SYS5 1 SYS2 Identifies when the SYSCLKn divide ratio has been modified. 0 = SYSCLKn ratio has not been modified. When GOSET is set, SYSCLKn will not be affected. 1 = SYSCLKn ratio has been modified. When GOSET is set, SYSCLKn will change to the new ratio. 31-8 6-5 3-2 0 7.8.2.5 SYSCLK Status Register (SYSTAT) The SYSCLK status register (SYSTAT) shows the status of SYSCLK[11:1]. SYSTAT is shown in Figure 7-28 and described in Table 7-68. Figure 7-28 SYSCLK Status Register (SYSTAT) 31 11 10 Reserved 9 SYS11ON SYS10ON R-n R-1 8 7 6 5 4 3 2 1 0 SYS9ON SYS8ON SYS7ON SYS6ON SYS5ON SYS4ON SYS3ON SYS2ON SYS1ON R-1 R-1 R-1 R-1 R-1 R-1 R-1 R-1 R-1 R-1 Legend: R/W = Read/Write; R = Read only; -n = value after reset Table 7-68 SYSCLK Status Register (SYSTAT) Field Descriptions Bit Field 31-11 Reserved Description Reserved. The reserved bit location is always read as 0. A value written to this field has no effect. (1) SYS[N ]ON 10-0 SYSCLK[N] on status. 0 = SYSCLK[N] is gated. 1 = SYSCLK[N] is on. End of Table 7-68 1 Where N = 1, 2, 3,....N (Not all these output clocks may be used on a specific device. For more information, see the device-specific data manual) 7.8.2.6 Reset Type Status Register (RSTYPE) The reset type status (RSTYPE) register latches the cause of the last reset. If multiple reset sources occur simultaneously, this register latches the highest priority reset source. The Reset Type Status register is shown in Figure 7-29 and described in Table 7-69. Figure 7-29 31 Reset Type Status Register (RSTYPE) 29 28 27 12 11 8 7 3 2 1 0 Reserved EMU-RST Reserved WDRST[N] Reserved PLLCTRLRST RESET POR R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 Legend: R = Read only; -n = value after reset Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 215 ADVANCE INFORMATION End of Table 7-67 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-69 Bit www.ti.com Reset Type Status Register (RSTYPE) Field Descriptions Field Description 31-29 Reserved Reserved. Read only. Always reads as 0. Writes have no effect. 28 EMU-RST Reset initiated by emulation. 0 = Not the last reset to occur. 1 = The last reset to occur. ADVANCE INFORMATION 27-12 Reserved Reserved. Read only. Always reads as 0. Writes have no effect. 11 WDRST3 10 WDRST2 9 WDRST1 Reset initiated by Watchdog Timer[N]. 0 = Not the last reset to occur. 1 = The last reset to occur. 8 WDRST0 7-3 Reserved Reserved. Read only. Always reads as 0. Writes have no effect. 2 PLLCTLRST Reset initiated by PLLCTL. 0 = Not the last reset to occur. 1 = The last reset to occur. 1 RESET RESET reset. 0 = RESET was not the last reset to occur. 1 = RESET was the last reset to occur. 0 POR Power-on reset. 0 = Power-on reset was not the last reset to occur. 1 = Power-on reset was the last reset to occur. End of Table 7-69 7.8.2.7 Reset Control Register (RSTCTRL) This register contains a key that enables writes to the MSB of this register and the RSTCFG register. The key value is 0x5A69. A valid key will be stored as 0x000C, any other key value is invalid. When the RSTCTRL or the RSTCFG is written, the key is invalidated. Every write must be set up with a valid key. The Software Reset Control register (RSTCTRL) is shown in Figure 7-30 and described in Table 7-70. Figure 7-30 Reset Control Register (RSTCTRL) 31 17 Reserved R-0x0000 16 15 SWRST R/W-0x (1) 0 KEY R/W-0x0003 Legend: R = Read only; -n = value after reset; 1 Writes are conditional based on valid key. Table 7-70 Reset Control Register (RSTCTRL) Field Descriptions Bit Field Description 31-17 Reserved Reserved. 16 SWRST Software reset 0 = Reset 1 = Not reset 15-0 KEY Key used to enable writes to RSTCTRL and RSTCFG. End of Table 7-70 216 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.8.2.8 Reset Configuration Register (RSTCFG) This register is used to configure the type of reset initiated by RESET, Watchdog Timer and the PLL controller’s RSTCTRL register; i.e., a Hard reset or a Soft reset. By default, these resets will be Hard resets. The Reset Configuration register (RSTCFG) is shown in Figure 7-31 and described in Table 7-71. Figure 7-31 Reset Configuration Register (RSTCFG) 31 16 15 Reserved 14 13 Reserved R-0x0000 12 PLLCTLRSTTYPE R-00 R/W-0 (2) 11 RESETTYPE R/W-0 4 3 Reserved 2 0 (1) WDTYPE[N ] 2 R-0x0 R/W-0x00 ADVANCE INFORMATION Legend: R = Read only; R/W = Read/Write; -n = value after reset 1 Where N = 1, 2, 3,....N (Not all these output may be used on a specific device. For more information, see the device-specific data manual) 2 Writes are conditional based on valid key. For details, see Section 7.8.2.7 ‘‘Reset Control Register (RSTCTRL)’’. Table 7-71 Reset Configuration Register (RSTCFG) Field Descriptions Bit Acronym Description 31-14 Reserved Reserved. 13 PLLCTLRSTTYPE PLL controller initiates a software-driven reset of type: 0 = Hard reset (default) 1 = Soft reset 12 RESETTYPE RESET initiates a reset of type: 0 = Hard Reset (default) 1 = Soft Reset 11-4 Reserved Reserved. 3 WDTYPE3 2 WDTYPE2 1 WDTYPE1 Watchdog Timer [N] initiates a reset of type: 0 = Hard Reset (default) 1 = Soft Reset 0 WDTYPE0 End of Table 7-71 7.8.2.9 Reset Isolation Register (RSISO) This register is used to select the module clocks that must maintain their clocking without pausing through non Power-on reset. Setting any of these bits effectively blocks reset to all PLLCTL registers in order to maintain current values of PLL multiplier, divide ratios and other settings. The Reset Isolation register (RSTCTRL) is shown in Figure 7-32 and described in Table 7-72. Figure 7-32 Reset Isolation Register (RSISO) 31 9 8 Reserved 16 15 Reserved 10 SRIOISO SRISO 7 Reserved 4 AIF2ISO 3 Reserved 2 0 R-0x0000 R-0x00 R/W-0 R/W-0 R-0x0 R/W-0 R-000 Legend: R = Read only; R/W = Read/Write; -n = value after reset Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 217 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-72 Bit www.ti.com Reset Isolation Register (RSISO) Field Descriptions Acronym Description ADVANCE INFORMATION 31-10 Reserved Reserved. 9 SRIOISO Isolate SRIO module 0 = Not reset isolated 1 = Reset Isolated 8 SRISO Isolate SmartReflex 0 = Not reset isolated 1 = Reset Isolated 7-4 Reserved Reserved. 3 AIF2ISO Isolate AIF2 module 0 = Not reset isolated 1 = Reset isolated 2-0 Reserved Reserved. End of Table 7-72 7.8.3 Main PLL Control Register The Main PLL uses a chip-level register (MAINPLLCTL) along with the PLL controller for its configuration. This MMR exists inside the Bootcfg space. To write to this register, software should go through an un-locking sequence using KICK0/KICK1 registers. For valid configurable values into the MAINPLLCTL register see Section 2.5.3 ‘‘PLL Boot Configuration Settings’’ on page 31. See section 3.3.4 ‘‘Kicker Mechanism (KICK0 and KICK1) Register’’ on page 66 for the address location of the registers and locking and unlocking sequences for accessing the registers. This register is reset on POR only. Figure 7-33 Main PLL Control Register (MAINPLLCTL) 31 24 23 19 18 16 15 12 11 6 5 0 BWADJ[7:0] Reserved PLLM[12:6] Reserved PLLD RW,+0000 0101 RW - 0000 0 RW,+0000000 RW, +000000 RW,+000000 Legend: RW = Read/Write; -n = value after reset 7.8.4 Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Electrical Data/Timing Table 7-73 Bit Main PLL Control Register Field Descriptions Field Description 31-24 BWADJ[7:0] BWADJ should be programmed to a value equal to half of PLLM[12:0] 23-19 Reserved Reserved 18-12 PLLM[12:6] A 13-bit bus that selects the values for the multiplication factor (see Note below) 11-6 Reserved Reserved 5-0 PLLD A 6-bit bus that selects the values for the reference divider End of Table 7-73 Note—PLLM[5:0] bits of the multiplier is controlled by the PLLM register inside the PLL controller and PLLM[12:6] bits are controlled by the above chip level register. MAINPLLCTL register PLLM[12:6] bits should be written just before writing to PLLM register PLLM[5:0] bits in the controller to have the complete 13 bit value latched when the GO operation is initiated in the PLL controller. See the Phase Locked Loop 218 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2) for the recommended programming sequence. Output Divide ratio and Bypass enable/disable of the Main PLL is controlled by the SECCTL register in the PLL Controller. See the Phase Locked Loop (PLL) Controller for KeyStone Devices User Guide (literature number SPRUGV2) for more details. Table 7-74 Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Timing Requirements (Part 1 of 2) (see Figure 7-34 and Figure 7-35) No. Min Max Unit 1 tc(CORCLKN) Cycle Time _ CORECLKN cycle time 10 25 ns 1 tc(CORECLKP) Cycle Time _ CORECLKP cycle time 10 25 ns 3 tw(CORECLKN) Pulse Width _ CORECLKN high 0.45*tc(CORECLKN) 0.55*tc(CORECLKN) ns 2 tw(CORECLKN) Pulse Width _ CORECLKN low 0.45*tc(CORECLKN) 0.55*tc(CORECLKN) ns 2 tw(CORECLKP) Pulse Width _ CORECLKP high 0.45*tc(CORECLKP) 0.55*tc(CORECLKP) ns 3 tw(CORECLKP) Pulse Width _ CORECLKP low 0.45*tc(CORECLKP) 0.55*tc(CORECLKP) ns 4 tr(CORECLKN_250mv) Transition Time _ CORECLKN Rise time (250mV) 50 350 ps 4 tf(CORECLKN_250mv) Transition Time _ CORECLKN Fall time (250mV) 50 350 ps 4 tr(CORECLKP_250mv) Transition Time _ CORECLKP Rise time (250mV) 50 350 ps 4 tf(CORECLKP_250mv) Transition Time _ CORECLKP Fall time (250mV) 50 350 ps 5 tj(CORECLKN) Jitter, Peak_to_Peak _ Periodic CORECLKN 100 ps 5 tj(CORECLKP) Jitter, Peak_to_Peak _ Periodic CORECLKP 100 ps 1 tc(SRIOSMGMIICLKN) Cycle Time _ SRIOSMGMIICLKN cycle time 3.2 6.4 ns 1 tc(SRIOSMGMIICLKP) Cycle Time _ SRIOSMGMIICLKP cycle time 3.2 6.4 ns 3 tw(SRIOSMGMIICLKN) Pulse Width _ SRIOSMGMIICLKN high 0.45*tc(SRIOSGMIICLKN) 0.55*tc(SRIOSGMIICLKN) ns 2 tw(SRIOSMGMIICLKN) Pulse Width _ SRIOSMGMIICLKN low 0.45*tc(SRIOSGMIICLKN) 0.55*tc(SRIOSGMIICLKN) ns 2 tw(SRIOSMGMIICLKP) Pulse Width _ SRIOSMGMIICLKP high 0.45*tc(SRIOSGMIICLKP) 0.55*tc(SRIOSGMIICLKP) ns 3 tw(SRIOSMGMIICLKP) Pulse Width _ SRIOSMGMIICLKP low 0.45*tc(SRIOSGMIICLKP) 0.55*tc(SRIOSGMIICLKP) ns 4 tr(SRIOSMGMIICLKN_25 Transition Time _ SRIOSMGMIICLKN Rise time (250mV) 0mv) 50 350 ps 4 tf(SRIOSMGMIICLKN_25 Transition Time _ SRIOSMGMIICLKN Fall time (250mV) 0mv) 50 350 ps 4 tr(SRIOSMGMIICLKP_25 Transition Time _ SRIOSMGMIICLKP Rise time (250mV) 0mv) 50 350 ps 4 tf(SRIOSMGMIICLKP_25 Transition Time _ SRIOSMGMIICLKP Fall time (250mV) 0mv) 50 350 ps 4 tr(SRIOSMGMIICLKN) Transition Time _ SRIOSMGMIICLKN Rise time (VOH) 50 1300 ps 4 tf(SRIOSMGMIICLKP) Transition Time _ SRIOSMGMIICLKN Fall time (VOH) 50 1300 ps 4 tr(SRIOSMGMIICLKN) Transition Time _ SRIOSMGMIICLKP Rise time (VOH) 50 1300 ps 50 1300 ps SRIOSGMIICLK[P:N] 4 tf(SRIOSMGMIICLKP) Transition Time _ SRIOSMGMIICLKP Fall time (VOH) 5 tj(SRIOSMGMIICLKN) Jitter, Peak_to_Peak _ Periodic SRIOSMGMIICLKN 4 ps,RMS 5 tj(SRIOSMGMIICLKP) Jitter, Peak_to_Peak _ Periodic SRIOSMGMIICLKP 4 ps,RMS 5 tj(SRIOSMGMIICLKN) Jitter, Peak_to_Peak _ Periodic SRIOSMGMIICLKN (SRIO Not Used) 8 ps,RMS 5 tj(SRIOSMGMIICLKP) Jitter, Peak_to_Peak _ Periodic SRIOSMGMIICLKP (SRIO Not Used) 8 ps,RMS 1 tc(MCMCLKN) Cycle Time _ MCMCLKN cycle time 3.2 6.4 ns 1 tc(MCMCLKP) Cycle Time _ MCMCLKP cycle time 3.2 6.4 ns MCMCLK[P:N] Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 219 ADVANCE INFORMATION CORECLK[P:N] TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-74 www.ti.com Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Timing Requirements (Part 2 of 2) (see Figure 7-34 and Figure 7-35) No. Min Max Unit ADVANCE INFORMATION 3 tw(MCMCLKN) Pulse Width _ MCMCLKN high 0.45*tc(MCMCLKN) 0.55*tc(MCMCLKN) ns 2 tw(MCMCLKN) Pulse Width _ MCMCLKN low 0.45*tc(MCMCLKN) 0.55*tc(MCMCLKN) ns 2 tw(MCMCLKP) Pulse Width _ MCMCLKP high 0.45*tc(MCMCLKP) 0.55*tc(MCMCLKP) ns 3 tw(MCMCLKP) Pulse Width _ MCMCLKP low 0.45*tc(MCMCLKP) 0.55*tc(MCMCLKP) ns 4 tr(MCMCLKN_250mv) Transition Time _ MCMCLKN Rise time (250mV) 50 350 ps 4 tf(MCMCLKN_250mv) Transition Time _ MCMCLKN Fall time (250mV) 50 350 ps 4 tr(MCMCLKP_250mv) Transition Time _ MCMCLKP Rise time (250mV) 50 350 ps 4 tf(MCMCLKP_250mv) Transition Time _ MCMCLKP Fall time (250mV) 50 350 ps 4 tr(MCMCLKN) Transition Time _ MCMCLKN Rise time (VOH) 50 1300 ps 4 tf(MCMCLKP) Transition Time _ MCMCLKN Fall time (VOH) 50 1300 ps 4 tr(MCMCLKN) Transition Time _ MCMCLKP Rise time (VOH) 50 1300 ps 4 tf(MCMCLKP) Transition Time _ MCMCLKP Fall time (VOH) 50 1300 ps 5 tj(MCMCLKN) Jitter, Peak_to_Peak _ Periodic MCMCLKN 4 ps,RMS 5 tj(MCMCLKP) Jitter, Peak_to_Peak _ Periodic MCMCLKP 4 ps,RMS 1 tc(PCIECLKN) Cycle Time _ PCIECLKN cycle time 1 tc(PCIECLKP) Cycle Time _ PCIECLKP cycle time 3.2 10 ns 3 tw(PCIECLKN) Pulse Width _ PCIECLKN high 0.45*tc(PCIECLKN) 0.55*tc(PCIECLKN) ns 2 tw(PCIECLKN) Pulse Width _ PCIECLKN low 0.45*tc(PCIECLKN) 0.55*tc(PCIECLKN) ns 2 tw(PCIECLKP) Pulse Width _ PCIECLKP high 0.45*tc(PCIECLKP) 0.55*tc(PCIECLKP) ns 3 tw(PCIECLKP) Pulse Width _ PCIECLKP low 0.45*tc(PCIECLKP) 0.55*tc(PCIECLKP) ns 4 tr(PCIECLKN_250mv) Transition Time _ PCIECLKN Rise time (250mV) 50 350 ps 4 tf(PCIECLKN_250mv) Transition Time _ PCIECLKN Fall time (250mV) 50 350 ps 4 tr(PCIECLKP_250mv) Transition Time _ PCIECLKP Rise time (250mV) 50 350 ps 4 tf(PCIECLKP_250mv) Transition Time _ PCIECLKP Fall time (250mV) 50 350 ps 4 tr(PCIECLKN) Transition Time _ PCIECLKN Rise time (VOH) 50 1300 ps 4 tf(PCIECLKP) Transition Time _ PCIECLKN Fall time (VOH) 50 1300 ps 4 tr(PCIECLKN) Transition Time _ PCIECLKP Rise time (VOH) 50 1300 ps 4 tf(PCIECLKP) Transition Time _ PCIECLKP Fall time (VOH) 50 1300 ps 5 tj(PCIECLKN) Jitter, Peak_to_Peak _ Periodic PCIECLKN 4 ps,RMS 5 tj(PCIECLKP) Jitter, Peak_to_Peak _ Periodic PCIECLKP 4 ps,RMS PCIECLK[P:N] 3.2 10 ns End of Table 7-74 Figure 7-34 Main PLL Controller/SRIO/HyperLink/PCIe Clock Input Timing 1 2 3 <CLK_NAME>CLKN <CLK_NAME>CLKP 4 220 TMS320C6674 Peripheral Information and Electrical Specifications 5 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-35 PLL Transition Time peak-to-peak differential input voltage (250 mV to 2 V) 0 250 mV peak-to-peak ADVANCE INFORMATION TR = 50 ps min to 350 ps max (10% to 90 %) for the 250 mV peak-to-peak centered at zero crossing Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 221 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.9 DD3 PLL The DDR3 PLL generates interface clocks for the DDR3 memory controller. When coming out of power-on reset, DDR3 PLL is programmed to a valid frequency during the boot config before being enabled and used. DDR3 PLL power is supplied externally via the Main PLL power-supply pin (AVDDA2). An external EMI filter circuit must be added to all PLL supplies. See the Hardware Design Guide for KeyStone Devices (literature number SPRABI2). For the best performance, TI recommends that all the PLL external components be on a single side of the board without jumpers, switches, or components other than those shown. For reduced PLL jitter, maximize the spacing between switching signal traces and the PLL external components (C1, C2, and the EMI Filter). Figure 7-36 DDR3 PLL Block Diagram ADVANCE INFORMATION DDR3 PLL DDRCLK(N|P) /2 PLLOUT DDR3 PHY xPLLM 7.9.1 DDR3 PLL Control Register The DDR3 PLL, which is used to drive the DDR PHY for the EMIF, does not use a PLL controller. DDR3 PLL can be controlled using the DDR3PLLCTL register located in the Bootcfg module. This MMR exists inside the Bootcfg space. To write to this register, software should go through an un-locking sequence using KICK0/KICK1 registers. For suggested configurable values see section 3.3.4 ‘‘Kicker Mechanism (KICK0 and KICK1) Register’’ on page 66 for the address location of the registers and locking and unlocking sequences for accessing the registers. This register is reset on POR only . DDR3 PLL Control Register (DDR3PLLCTL) (1) Figure 7-37 31 24 23 22 19 18 16 15 6 5 0 Reserved BYPASS Reserved PLLM PLLD RW,+0000 1001 RW,+0 RW,+0001 RW,+0000000010011 RW,+000000 Legend: RW = Read/Write; -n = value after reset 1 This register is Reset on POR only. The regreset, reset and bgreset from PLL are all tied to a common pll0_ctrl_rst_n The pwrdn, regpwrdn, bgpwrdn are all tied to common pll0_ctrl_to_pll_pwrdn. Table 7-75 Bit DDR3 PLL Control Register Field Descriptions Field Description 31-24 Reserved Reserved 23 BYPASS Enable Bypass Mode 0 = Bypass Disabled 1 = Bypass Enabled 22-19 Reserved Reserved 18-6 PLLM A 13-bit bus that selects the values for the multiplication factor (see Note below) 5-0 PLLD A 6-bit bus that selects the values for the reference divider End of Table 7-75 222 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.9.2 DDR3 PLL Device-Specific Information As shown in Figure 7-36, the output of DDR3 PLL (PLLOUT) is divided by 2 and directly fed to the DDR3 memory controller. The DDR3 PLL is affected by power-on reset. During power-on resets, the internal clocks of the DDR3 PLL are affected as described in Section 7.7 ‘‘Reset Controller’’ on page 202. DDR3 PLL is unlocked only during the power-up sequence and is locked by the time the RESETSTAT pin goes high. It does not lose lock during any of the other resets. 7.9.3 DDR3 PLL Input Clock Electrical Data/Timing Table 7-76 DDR3 PLL DDRREFCLK(N|P) Timing Requirements No. Min Max 3.2 25 Unit DDRCLK[P:N] 1 tc(DDRCLKN) Cycle Time _ DDRCLKN cycle time ns 1 tc(DDRCLKP) Cycle Time _ DDRCLKP cycle time 3.2 25 ns 3 tw(DDRCLKN) Pulse Width _ DDRCLKN high 0.45*tc(DDRCLKN) 0.55*tc(DDRCLKN) ns 2 tw(DDRCLKN) Pulse Width _ DDRCLKN low 0.45*tc(DDRCLKN) 0.55*tc(DDRCLKN) ns 2 tw(DDRCLKP) Pulse Width _ DDRCLKP high 0.45*tc(DDRCLKP) 0.55*tc(DDRCLKP) ns 3 tw(DDRCLKP) Pulse Width _ DDRCLKP low 0.45*tc(DDRCLKP) 0.55*tc(DDRCLKP) ns 4 tr(DDRCLKN_250mv) Transition Time _ DDRCLKN Rise time (250mV) 50 350 ps 4 tf(DDRCLKN_250mv) Transition Time _ DDRCLKN Fall time (250mV) 50 350 ps 4 tr(DDRCLKP_250mv) Transition Time _ DDRCLKP Rise time (250mV) 50 350 ps 4 tf(DDRCLKP_250mv) Transition Time _ DDRCLKP Fall time (250mV) 50 350 ps 5 tj(DDRCLKN) Jitter, Peak_to_Peak _ Periodic DDRCLKN 0.025*tc(DDRCLKN) ps 5 tj(DDRCLKP) Jitter, Peak_to_Peak _ Periodic DDRCLKP 0.025*tc(DDRCLKN) ps TMS320C6674 Peripheral Information and Electrical Specifications 223 End of Table 7-76 Figure 7-38 DDR3 PLL DDRCLK Timing 1 2 3 <CLK_NAME>CLKN <CLK_NAME>CLKP 4 Copyright 2010 Texas Instruments Incorporated 5 ADVANCE INFORMATION (see Figure 7-38 and Figure 7-35) TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.10 PASS PLL The PASS PLL generates interface clocks for the Packet Accelerator Subsystem. Using the PACLKSEL pin the user can select the input source of PASS PLL as either the output of Main PLL mux or the PASSCLK clock reference sources. When coming out of power-on reset, PASS PLL comes out in a bypass mode and needs to be programmed to a valid frequency before being enabled and used. ADVANCE INFORMATION PASS PLL power is supplied externally via the Main PLL power-supply pin (AVDDA3). An external EMI filter circuit must be added to all PLL supplies. Please see the Hardware Design Guide for KeyStone Devices (literature number SPRABI2). for detailed recommendations. For the best performance, TI recommends that all the PLL external components be on a single side of the board without jumpers, switches, or components other than those shown. For reduced PLL jitter, maximize the spacing between switching signal traces and the PLL external components (C1, C2, and the EMI Filter). Figure 7-39 PASS PLL Block Diagram /2 PASS PLL CORECLK(P|N) PLLOUT Packet Accelerator PASSCLK(P|N) xPLLM PACLKSEL 7.10.1 PASS PLL Control Register The PASS PLL, which is used to drive the Packet Accelerator Sub-System, does not use a PLL controller. PASS PLL can be controlled using the PAPLLCTL register located in Bootcfg module. This MMR exists inside the Bootcfg space. To write to this register, software should go through an un-locking sequence using KICK0/KICK1 registers. For suggested configurable values see PLL Section. See section 3.3.4 ‘‘Kicker Mechanism (KICK0 and KICK1) Register’’ on page 66 for the address location of the registers and locking and unlocking sequences for accessing the registers. This register is reset on POR only . PASS PLL Control Register (PASSPLLCTL) (1) Figure 7-40 31 24 23 22 19 18 16 15 6 5 0 Reserved BYPASS Reserved PLLM PLLD RW,+0000 1001 RW,+0 RW,+0001 RW,+0000000010011 RW,+000000 Legend: RW = Read/Write; -n = value after reset 1 This register is Reset on POR only. The regreset, reset and bgreset from PLL are all tied to a common pll0_ctrl_rst_n The pwrdn, regpwrdn, bgpwrdn are all tied to common pll0_ctrl_to_pll_pwrdn. Table 7-77 Bit PASS PLL Control Register Field Descriptions Field Description 31-24 Reserved Reserved 23 BYPASS Enable Bypass Mode 0 = Bypass Disabled 1 = Bypass Enabled 22-19 Reserved Reserved 18-6 PLLM A 13-bit bus that selects the values for the multiplication factor (see Note below) 5-0 PLLD A 6-bit bus that selects the values for the reference divider End of Table 7-77 224 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.10.2 PASS PLL Device-Specific Information As shown in Figure 7-39, the output of PASS PLL (PLLOUT) is divided by 2 and directly fed to the Packet Accelerator Sub-System. The PASS PLL is affected by power-on reset. During power-on resets, the internal clocks of the PASS PLL are affected as described in Section 7.7 ‘‘Reset Controller’’ on page 202. PASS PLL is unlocked only during the power-up sequence and is locked by the time the RESETSTAT pin goes high. It does not lose lock during any of the other resets. Table 7-78 PASS PLL Timing Requirements (See Figure 7-41 and Figure 7-35) Parameter Min Max Unit PASSCLK[P:N] 1 tc(PASSCLKN) Cycle Time _ PASSCLKN cycle time 3.2 6.4 ns 1 tc(PASSCLKP) Cycle Time _ PASSCLKP cycle time 3.2 6.4 ns 3 tw(PASSCLKN) Pulse Width _ PASSCLKN high 0.45*tc(PASSCLKN) 0.55*tc(PASSCLKN) ns 2 tw(PASSCLKN) Pulse Width _ PASSCLKN low 0.45*tc(PASSCLKN) 0.55*tc(PASSCLKN) ns 2 tw(PASSCLKP) Pulse Width _ PASSCLKP high 0.45*tc(PASSCLKP) 0.55*tc(PASSCLKP) ns 3 tw(PASSCLKP) Pulse Width _ PASSCLKP low 0.45*tc(PASSCLKP) 0.55*tc(PASSCLKP) ns 4 tr(PASSCLKN_250mv) Transition Time _ PASSCLKN Rise time (250mV) 50 350 ps 4 tf(PASSCLKN_250mv) Transition Time _ PASSCLKN Fall time (250mV) 50 350 ps 4 tr(PASSCLKP_250mv) Transition Time _ PASSCLKP Rise time (250mV) 50 350 ps 4 tf(PASSCLKP_250mv) Transition Time _ PASSCLKP Fall time (250mV) 50 350 ps 5 tj(PASSCLKN) Jitter, Peak_to_Peak _ Periodic PASSCLKN 100 ps, pk-pk 5 tj(PASSCLKP) Jitter, Peak_to_Peak _ Periodic PASSCLKP 100 ps, pk-pk Figure 7-41 PASS PLL Timing 1 2 3 <CLK_NAME>CLKN <CLK_NAME>CLKP 4 Copyright 2010 Texas Instruments Incorporated 5 TMS320C6674 Peripheral Information and Electrical Specifications 225 ADVANCE INFORMATION No. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.11 DDR3 Memory Controller The 64-bit DDR3 Memory Controller bus of the TMS320C6674 is used to interface to JEDEC standard-compliant DDR3 SDRAM devices. The DDR3 external bus interfaces only to DDR3 SDRAM devices; it does not share the bus with any other types of peripherals. 7.11.1 DDR3 Memory Controller Device-Specific Information The TMS320C6674 includes one 64-bit wide 1.5-V DDR3 SDRAM EMIF interface. The DDR3 interface can operate at 800 Mega Transfers per Second (MTS), 1033 MTS, 1333 MTS, and 1600 MTS. ADVANCE INFORMATION Due to the complicated nature of the interface, a limited number of topologies will be supported to provide a 16-bit, 32-bit, or 64-bit interface. The DDR3 electrical requirements are fully specified in the DDR Jedec Specification JESD79-3C. Standard DDR3 SDRAMs are available in 8- and 16-bit versions, allowing for the following bank topologies to be supported by the interface: • 72-bit: Five 16-bit SDRAMs (including 8 bits of ECC) • 72-bit: Nine 8-bit SDRAMs (including 8 bits of ECC) • 36-bit: Three 16-bit SDRAMs (including 4 bits of ECC) • 36-bit: Five 8-bit SDRAMs (including 4 bits of ECC) • 64-bit: Four 16-bit SDRAMs • 64-bit: Eight 8-bit SDRAMs • 32-bit: Two 16-bit SDRAMs • 32-bit: Four 8-bit SDRAMs • 16-bit: One 16-bit SDRAM • 16-bit: Two 8-bit SDRAM The approach to specifying interface timing for the DDR3 memory bus is different than on other interfaces such as I2C or SPI. For these other interfaces, the device timing was specified in terms of data manual specifications and I/O buffer information specification (IBIS) models. For the DDR3 memory bus, the approach is to specify compatible DDR3 devices and provide the printed circuit board (PCB) solution and guidelines directly to the user. A race condition may exist when certain masters write data to the DDR3 memory controller. For example, if master A passes a software message via a buffer in external memory and does not wait for indication that the write completes, when master B attempts to read the software message, then the master B read may bypass the master A write and, thus, master B may read stale data and, therefore, receive an incorrect message. Some master peripherals (e.g., EDMA3 transfer controllers) will always wait for the write to complete before signaling an interrupt to the system, thus avoiding this race condition. For masters that do not have a hardware specification of write-read ordering, it may be necessary to specify data ordering via software. If master A does not wait for indication that a write is complete, it must perform the following workaround: 1. Perform the required write. 2. Perform a dummy write to the DDR3 memory controller module ID and revision register. 3. Perform a dummy read to the DDR3 memory controller module ID and revision register. 4. Indicate to master B that the data is ready to be read after completion of the read in step 3. The completion of the read in step 3 ensures that the previous write was done. 226 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.11.2 DDR3 Memory Controller Electrical Data/Timing The KeyStone DSP DDR3 Implementation Guidelines (literature number SPRABI1)specifies a complete DDR3 interface solution as well as a list of compatible DDR3 devices. The DDR3 electrical requirements are fully specified in the DDR3 Jedec Specification JESD79-3C. TI has performed the simulation and system characterization to ensure all DDR3 interface timings in this solution are met; therefore, no electrical data/timing information is supplied here for this interface. 7.12 I2C Peripheral The inter-integrated circuit (I2C) module provides an interface between DSP and other devices compliant with 2 2 Philips Semiconductors Inter-IC bus (I C bus) specification version 2.1 and connected by way of an I C bus. External components attached to this 2-wire serial bus can transmit/receive up to 8-bit data to/from the DSP through the I2C module. 2 7.12.1 I C Device-Specific Information 2 2 The TMS320C6674 device includes an I C peripheral module. NOTE: when using the I C module, ensure there are external pullup resistors on the SDA and SCL pins. 2 The I C modules on the C6674 may be used by the DSP to control local peripheral ICs (DACs, ADCs, etc.) or may be used to communicate with other controllers in a system or to implement a user interface. 2 The I C port supports: 2 • Compatible with Philips I C specification revision 2.1 (January 2000) • Fast mode up to 400 Kbps (no fail-safe I/O buffers) • Noise filter to remove noise 50 ns or less • 7-bit and 10-bit device addressing modes • Multi-master (transmit/receive) and slave (transmit/receive) functionality • Events: DMA, interrupt, or polling • Slew-rate limited open-drain output buffers Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 227 ADVANCE INFORMATION Note—TI supports only designs that follow the board design guidelines outlined in the application report. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 2 Figure 7-42 shows a block diagram of the I C module. Figure 7-42 I2C Module Block Diagram 2 I C Module Clock Prescale Peripheral Clock (CPU/6) 2 I CPSC Control Bit Clock Generator ADVANCE INFORMATION SCL Noise Filter 2 I C Clock I COAR Own Address I2CSAR Slave Address I2CMDR Mode 2 2 I CCLKH I2CCLKL 2 I CCNT Transmit I2CXSR 2 I CDXR Transmit Shift Extended Mode Transmit Buffer SDA I2C Data I2CEMDR Data Count Interrupt/DMA Noise Filter I2CDRR 2 I CRSR 2 Interrupt Mask/Status 2 Interrupt Status I CIMR Receive Receive Buffer I CSTR Receive Shift I CIVR 2 Interrupt Vector Shading denotes control/status registers. 2 7.12.2 I C Peripheral Register Description(s) Table 7-79 228 I2C Registers (Part 1 of 2) Hex Address Range Acronym Register Name 02B0 4000 ICOAR I2C own address register 02B0 4004 ICIMR I C interrupt mask/status register 02B0 4008 ICSTR I C interrupt status register 02B0 400C ICCLKL I2C clock low-time divider register 02B0 4010 ICCLKH I C clock high-time divider register 02B0 4014 ICCNT I C data count register 02B0 4018 ICDRR I2C data receive register 02B0 401C ICSAR I C slave address register 02B0 4020 ICDXR I C data transmit register 02B0 4024 ICMDR I2C mode register 02B0 4028 ICIVR I C interrupt vector register 02B0 402C ICEMDR I C extended mode register 02B0 4030 ICPSC 2 2 2 2 2 2 2 2 I2C prescaler register TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-79 2 I C Registers (Part 2 of 2) Hex Address Range Acronym 02B0 4034 ICPID1 I2C peripheral identification register 1 [Value: 0x0000 0105] Register Name 02B0 4038 ICPID2 I C peripheral identification register 2 [Value: 0x0000 0005] 02B0 403C - 02B0 405C - Reserved 02B0 4060 - 02B3 407F - Reserved 02B0 4080 - 02B3 FFFF - Reserved 2 End of Table 7-79 2 7.12.3.1 Inter-Integrated Circuits (I C) Timing Table 7-80 I2C Timing Requirements (1) (see Figure 7-43) Standard Mode No. 1 2 3 Min Max Fast Mode Min Max Units tc(SCL) Cycle time, SCL 10 2.5 us tsu(SCLH-SDAL) Setup time, SCL high before SDA low (for a repeated START condition) 4.7 0.6 us th(SDAL-SCLL) Hold time, SCL low after SDA low (for a START and a repeated START condition) 4 0.6 us 4.7 1.3 us 4 0.6 us 250 4 tw(SCLL) Pulse duration, SCL low 5 tw(SCLH) Pulse duration, SCL high 100 (2) 3.45 0 (3) Rise time, SDA 1000 20 + 0.1Cb tr(SCL) Rise time, SCL 1000 20 + 0.1Cb tf(SDA) Fall time, SDA 6 tsu(SDAV-SCLH) Setup time, SDA valid before SCL high 7 th(SCLL-SDAV) Hold time, SDA valid after SCL low (For I C bus devices) 0 8 tw(SDAH) Pulse duration, SDA high between STOP and START conditions 4.7 9 tr(SDA) 10 11 2 12 tf(SCL) Fall time, SCL 13 tsu(SCLH-SDAH) Setup time, SCL high before SDA high (for STOP condition) 14 tw(SP) 15 Cb (5) (3) us (5) 300 ns (5) 300 ns 300 20 + 0.1Cb (5) 300 ns 300 (5) 300 1.3 4 20 + 0.1Cb us 0.6 Pulse duration, spike (must be suppressed) Capacitive load for each bus line ns (4) 0.9 0 400 ns us 50 ns 400 pF End of Table 7-80 1 The I2C pins SDA and SCL do not feature fail-safe I/O buffers. These pins could potentially draw current when the device is powered down 2 2 2 A Fast-mode I C-bus™ device can be used in a Standard-mode I C-bus™ system, but the requirement tsu(SDA-SCLH) ≥ 250 ns must then be met. This will automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next data bit to the SDA line tr max + tsu(SDA-SCLH) = 1000 + 250 = 1250 ns (according to the Standard-mode I2C-Bus Specification) before the SCL line is released. 3 A device must internally provide a hold time of at least 300 ns for the SDA signal (referred to the VIHmin of the SCL signal) to bridge the undefined region of the falling edge of SCL. 4 The maximum th(SDA-SCLL) has only to be met if the device does not stretch the low period [tw(SCLL)] of the SCL signal. 5 Cb = total capacitance of one bus line in pF. If mixed with HS-mode devices, faster fall-times are allowed. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 229 ADVANCE INFORMATION 2 7.12.3 I C Electrical Data/Timing TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com I2C Receive Timings Figure 7-43 11 9 SDA 8 6 4 14 13 5 10 SCL 1 3 12 7 ADVANCE INFORMATION 2 3 Stop Table 7-81 Start Repeated Start 2 I C Switching Characteristics Stop (1) (see Figure 7-44) Standard Mode No. Parameter Min Fast Mode Max Min Max Unit 16 tc(SCL) Cycle time, SCL 10 2.5 ms 17 tsu(SCLH-SDAL) Setup time, SCL high to SDA low (for a repeated START condition) 4.7 0.6 ms 18 th(SDAL-SCLL) Hold time, SDA low after SCL low (for a START and a repeated START condition) 4 0.6 ms 19 tw(SCLL) Pulse duration, SCL low 4.7 1.3 ms 20 tw(SCLH) Pulse duration, SCL high 4 0.6 ms 21 td(SDAV-SDLH) Delay time, SDA valid to SCL high 250 100 ns 2 22 tv(SDLL-SDAV) Valid time, SDA valid after SCL low (For I C bus devices) 23 tw(SDAH) Pulse duration, SDA high between STOP and START conditions 0 0 4.7 1.3 0.9 ms ms 24 tr(SDA) Rise time, SDA 1000 20 + 0.1Cb (1) 300 ns 25 tr(SCL) Rise time, SCL 1000 20 + 0.1Cb (1) 300 ns (1) 300 ns 300 ns 10 pF 26 tf(SDA) Fall time, SDA 300 20 + 0.1Cb 27 tf(SCL) Fall time, SCL 300 20 + 0.1Cb (1) 28 td(SCLH-SDAH) Delay time, SCL high to SDA high (for STOP condition) 29 Cp Capacitance for each I C pin 2 4 0.6 10 ms End of Table 7-81 1 Cb = total capacitance of one bus line in pF. If mixed with HS-mode devices, faster fall-times are allowed. 230 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-44 2 I C Transmit Timings 26 24 SDA 23 21 19 28 20 25 SCL 18 27 22 17 18 Stop Start Copyright 2010 Texas Instruments Incorporated Repeated Start ADVANCE INFORMATION 16 Stop TMS320C6674 Peripheral Information and Electrical Specifications 231 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.13 SPI Peripheral The serial peripheral interconnect (SPI) module provides an interface between the DSP and other SPI-compliant devices. The primary intent of this interface is to allow for connection to a SPI ROM for boot. The SPI module on C6674 is supported only in Master mode. Additional chip-level components can also be included, such as temperature sensors or an I/O expander. 7.13.1 SPI Electrical Data/Timing 7.13.1.1 SPI Timing Table 7-82 SPI Timing Requirements ADVANCE INFORMATION See Figure 7-45) No. Min Max Unit Master Mode Timing Diagrams — Base Timings for 3 Pin Mode 7 tsu(SOMI-SPC) Input Setup Time, SPIx_SOMI valid before receive edge of SPIx_CLk. Polarity = 0 Phase = 0 2 ns 7 tsu(SOMI-SPC) Input Setup Time, SPIx_SOMI valid before receive edge of SPIx_CLk. Polarity = 0 Phase = 1 2 ns 7 tsu(SOMI-SPC) Input Setup Time, SPIx_SOMI valid before receive edge of SPIx_CLk. Polarity = 1 Phase = 0 2 ns 7 tsu(SOMI-SPC) Input Setup Time, SPIx_SOMI valid before receive edge of SPIx_CLk. Polarity = 1 Phase = 1 2 ns 8 th(SPC-SOMI) Input Hold Time, SPIx_SOMI valid after receive edge of SPIx_CLK. Polarity = 0 Phase = 0 5 ns 8 th(SPC-SOMI) Input Hold Time, SPIx_SOMI valid after receive edge of SPIx_CLK. Polarity = 0 Phase = 1 5 ns 8 th(SPC-SOMI) Input Hold Time, SPIx_SOMI valid after receive edge of SPIx_CLK. Polarity = 1 Phase = 0 5 ns 8 th(SPC-SOMI) Input Hold Time, SPIx_SOMI valid after receive edge of SPIx_CLK. Polarity = 1 Phase = 1 5 ns End of Table 7-82 Table 7-83 SPI Switching Characteristics (Part 1 of 2) (See Figure 7-45 and Figure 7-46) No. Parameter Min Max Unit Master Mode Timing Diagrams — Base Timings for 3 Pin Mode 1 tc(SPC) Cycle Time, SPIx_CLK, All Master Modes 1/66MHz ns 2 tw(SPCH) Pulse Width High, SPIx_CLK, All Master Modes 7 ns 3 tw(SPCL) Pulse Width Low, SPIx_CLK, All Master Modes 7 4 td(SIMO-SPC) Setup (Delay), initial data bit valid on SPIx_SIMO to initial edge on SPIx_CLK. Polarity = 0, Phase = 0. 5 ns 4 td(SIMO-SPC) Setup (Delay), initial data bit valid on SPIx_SIMO to initial edge on SPIx_CLK. Polarity = 0, Phase = 1. 5 ns 4 td(SIMO-SPC) Setup (Delay), initial data bit valid on SPIx_SIMO to initial edge on SPIx_CLK Polarity = 1, Phase = 0 5 ns 4 td(SIMO-SPC) Setup (Delay), initial data bit valid on SPIx_SIMO to initial edge on SPIx_CLK Polarity = 1, Phase = 1 5 ns 5 td(SPC-SIMO) Setup (Delay), subsequent data bits valid on SPIx_SIMO to initial edge on SPIx_CLK. Polarity = 0 Phase = 0 5 ns 5 td(SPC-SIMO) Setup (Delay), subsequent data bits valid on SPIx_SIMO to initial edge on SPIx_CLK Polarity = 0 Phase = 1 5 ns 5 td(SPC-SIMO) Setup (Delay), subsequent data bits valid on SPIx_SIMO to initial edge on SPIx_CLK Polarity = 1 Phase = 0 5 ns 5 td(SPC-SIMO) Setup (Delay), subsequent data bits valid on SPIx_SIMO to initial edge on SPIx_CLK Polarity = 1 Phase = 1 5 ns 6 toh(SPC-SIMO) Output hold time, SPIx_SIMO valid after receive edge of SPIx_CLK except for final bit. Polarity = 0 Phase = 0 0.5*tc - 2 ns 6 toh(SPC-SIMO) Output hold time, SPIx_SIMO valid after receive edge of SPIx_CLK except for final bit. Polarity = 0 Phase = 1 0.5*tc - 2 ns 232 TMS320C6674 Peripheral Information and Electrical Specifications ns Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Table 7-83 SPI Switching Characteristics (Part 2 of 2) (See Figure 7-45 and Figure 7-46) No. Parameter Min Max Unit 6 toh(SPC-SIMO) Output hold time, SPIx_SIMO valid after receive edge of SPIx_CLK except for final bit. Polarity = 1 Phase = 0 0.5*tc - 2 ns 6 toh(SPC-SIMO) Output hold time, SPIx_SIMO valid after receive edge of SPIx_CLK except for final bit. Polarity = 1 Phase = 1 0.5*tc - 2 ns Additional SPI Master Timings — 4 Pin Mode with Chip Select Option 19 td(SCS-SPC) Delay from SPIx_SCS\ active to first SPIx_CLK. Polarity = 0 Phase = 0 2*P2 - 5 19 td(SCS-SPC) Delay from SPIx_SCS\ active to first SPIx_CLK. Polarity = 0 Phase = 1 0.5*tc + (2*P2) - 5 0.5*tc + (2*P2) + 5 ns 19 td(SCS-SPC) Delay from SPIx_SCS\ active to first SPIx_CLK. Polarity = 1 Phase = 0 2*P2 - 5 19 td(SCS-SPC) Delay from SPIx_SCS\ active to first SPIx_CLK. Polarity = 1 Phase = 1 0.5*tc + (2*P2) - 5 0.5*tc + (2*P2) + 5 ns 20 td(SPC-SCS) Delay from final SPIx_CLK edge to master deasserting SPIx_SCS\. Polarity = 0 Phase = 0 1*P2 - 5 20 td(SPC-SCS) Delay from final SPIx_CLK edge to master deasserting SPIx_SCS\. Polarity = 0 Phase = 1 0.5*tc + (1*P2) - 5 0.5*tc + (1*P2) + 5 ns 20 td(SPC-SCS) Delay from final SPIx_CLK edge to master deasserting SPIx_SCS\. Polarity = 1 Phase = 0 1*P2 - 5 20 td(SPC-SCS) Delay from final SPIx_CLK edge to master deasserting SPIx_SCS\. Polarity = 1 Phase = 1 0.5*tc + (1*P2) - 5 0.5*tc + (1*P2) + 5 ns tw(SCSH) Minimum inactive time on SPIx_SCS\ pin between two transfers when SPIx_SCS\ is not held using the CSHOLD feature. 2*P2 - 5 2*P2 + 5 1*P2 + 5 1*P2 + 5 ns ns ns ns ns End of Table 7-83 Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 233 ADVANCE INFORMATION 2*P2 + 5 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Figure 7-45 www.ti.com SPI Master Mode Timing Diagrams — Base Timings for 3 Pin Mode 1 2 MASTER MODE POLARITY = 0 PHASE = 0 3 SPIx_CLK 5 4 SPIx_SIMO MO(0) 7 SPIx_SOMI 6 MO(1) MO(n-1) MO(n) 8 MI(0) MI(1) MI(n-1) MI(n) ADVANCE INFORMATION MASTER MODE POLARITY = 0 PHASE = 1 4 SPIx_CLK 6 5 SPIx_SIMO MO(0) 7 SPIx_SOMI MO(1) MO(n-1) MI(1) MI(n-1) MO(n) 8 MI(0) 4 MI(n) MASTER MODE POLARITY = 1 PHASE = 0 SPIx_CLK 5 SPIx_SIMO 6 MO(0) 7 SPIx_SOMI MO(1) MO(n-1) MO(n) 8 MI(0) MI(1) MI(n-1) MI(n) MASTER MODE POLARITY = 1 PHASE = 1 SPIx_CLK 5 4 SPIx_SIMO MO(0) 7 SPIx_SOMI Figure 7-46 6 MO(1) MO(n-1) MI(1) MI(n-1) MO(n) 8 MI(0) MI(n) SPI Additional Timings for 4 Pin Master Mode with Chip Select Option MASTER MODE 4 PIN WITH CHIP SELECT 19 20 SPIx_CLK SPIx_SIMO SPIx_SOMI MO(0) MI(0) MO(1) MO(n-1) MO(n) MI(1) MI(n-1) MI(n) SPIx_SCS 234 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.14 HyperLink Peripheral The TMS320C6674 will include the HyperLink bus for companion chip/die interfaces. This is a four lane SerDes interface designed to operate at 12.5 Gbps per lane from pin-to-pin and at 18 Gbps per lane from die-to-die. The interface is used to connect with external accelerators. The HyperLink links must be connected with DC coupling. The interface includes the Serial Station Management Interfaces used to send power management and flow messages between devices. This consists of four LVCMOS inputs and four LVCMOS outputs configured as two 2-wire output buses and two 2-wire input buses. Each 2-wire bus includes a data signal and a clock signal. Table 7-84 HyperLink Peripheral Timing Requirements No. Parameter Min Max Unit FL Interface 1 tc(MCMTXFLCLK) Clock Period - MCMTXFLCLK (C1) 6 ns 2 tw(MCMTXFLCLKH) High Pulse Width - MCMTXFLCLK 0.4*C1 0.6*C1 ns 3 tw(MCMTXFLCLKL) Low Pulse Width - MCMTXFLCLK 0.4*C1 0.6*C1 ns 6 tsu(MCMTXFLDAT-MCMTXFLCLKH) Setup Time - MCMTXFLDAT valid before MCMTXFLCLK high 1 ns 7 th(MCMTXFLCLKH-MCMTXFLDAT) Hold Time - MCMTXFLDAT valid after MCMTXFLCLK high 1 ns 6 tsu(MCMTXFLDAT-MCMTXFLCLKL) Setup Time - MCMTXFLDAT valid before MCMTXFLCLK low 1 ns 7 th(MCMTXFLCLKL-MCMTXFLDAT) Hold Time - MCMTXFLDAT valid after MCMTXFLCLK low 1 ns 1 tc(MCMRXPMCLK) Clock Period - MCMRXPMCLK (C3) 6 ns 2 tw(MCMRXPMCLK) High Pulse Width - MCMRXPMCLK 0.4*C3 0.6*C3 ns 3 tw(MCMRXPMCLK) Low Pulse Width - MCMRXPMCLK 0.4*C3 0.6*C3 ns 6 tsu(MCMRXPMDAT-MCMRXPMCLKH) Setup Time - MCMRXPMDAT valid before MCMRXPMCLK high 1 ns 7 th(MCMRXPMCLKH-MCMRXPMDAT) 1 ns 6 tsu(MCMRXPMDAT-MCMRXPMCLKL) Setup Time - MCMRXPMDAT valid before MCMRXPMCLK low 1 ns 7 th(MCMRXPMCLKL-MCMRXPMDAT) Hold Time - MCMRXPMDAT valid after MCMRXPMCLK low 1 ns PM Interface Hold Time - MCMRXPMDAT valid after MCMRXPMCLK high End of Table 7-84 Table 7-85 HyperLink Peripheral Switching Characteristics (Part 1 of 2) See Figure 7-47,Figure 7-48,Figure 7-49 No. Parameter Min Max Unit FL Interface 1 tc(MCMRXFLCLK) Clock Period - MCMRXFLCLK (C2) 6 ns 2 tw(MCMRXFLCLKH) High Pulse Width - MCMRXFLCLK 0.4*C2 0.6*C2 ns 3 tw(MCMRXFLCLKL) Low Pulse Width - MCMRXFLCLK 0.4*C2 0.6*C2 ns 4 tosu(MCMRXFLDAT-MCMRXFLCLKH) Setup Time - MCMRXFLDAT valid before MCMRXFLCLK high 1.1 ns 5 toh(MCMRXFLCLKH-MCMRXFLDAT) Hold Time - MCMRXFLDAT valid after MCMRXFLCLK high 1.1 ns 4 tosu(MCMRXFLDAT-MCMRXFLCLKL) Setup Time - MCMRXFLDAT valid before MCMRXFLCLK low 1.1 ns 5 toh(MCMRXFLCLKL-MCMRXFLDAT) Hold Time - MCMRXFLDAT valid after MCMRXFLCLK low 1.1 ns 1 tc(MCMTXPMCLK) Clock Period - MCMTXPMCLK (C4) 6 ns 2 tw(MCMTXPMCLK) High Pulse Width - MCMTXPMCLK 0.4*C4 0.6*C4 ns 3 tw(MCMTXPMCLK) Low Pulse Width - MCMTXPMCLK 0.4*C4 0.6*C4 ns PM Interface 4 tosu(MCMTXPMDAT-MCMTXPMCLKH) Setup Time - MCMTXPMDAT valid before MCMTXPMCLK high 1.1 ns 5 toh(MCMTXPMCLKH-MCMTXPMDAT) 1.1 ns Hold Time - MCMTXPMDAT valid after MCMTXPMCLK high Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 235 ADVANCE INFORMATION See Figure 7-47,Figure 7-48,Figure 7-49 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-85 www.ti.com HyperLink Peripheral Switching Characteristics (Part 2 of 2) See Figure 7-47,Figure 7-48,Figure 7-49 No. Parameter Min Max Unit 4 tosu(MCMTXPMDAT-MCMTXPMCLKL) Setup Time - MCMTXPMDAT valid before MCMTXPMCLK low 1.1 ns 5 toh(MCMTXPMCLKL-MCMTXPMDAT) Hold Time - MCMTXPMDAT valid after MCMTXPMCLK low 1.1 ns End of Table 7-85 Figure 7-47 HyperLink Station Management Clock Timing ADVANCE INFORMATION 1 2 Figure 7-48 3 HyperLink Station Management Transmit Timing 4 5 4 5 6 7 ?_CLK ?_DAT Figure 7-49 HyperLink Station Management Receive Timing 6 7 ?_CLK ?_DAT 236 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.15 UART Peripheral The UART performs serial-to-parallel conversions on data received from a peripheral device and parallel-to-serial conversion on data received from the DSP. The DSP can read the UART status at any time. The UART includes control capability and a processor interrupt system that can be tailored to minimize software management of the communications link. For more information on UART, see the Universal Asynchronous Receiver/Transmitter (UART) for KeyStone Devices User Guide in ‘‘Related Documentation from Texas Instruments’’ on page 59. Table 7-86 UART Timing Requirements (see Figure 7-50 and Figure 7-51) No. Parameter Min Max Unit Receive Timing 4 tw(RXSTART) Pulse width, receive start bit 0.96U 1.05U ns 5 tw(RXH) Pulse width, receive data/parity bit high 0.96U 1.05U ns 5 tw(RXL) Pulse width, receive data/parity bit low 0.96U 1.05U ns 6 tw(RXSTOP1) Pulse width, receive stop bit 1 0.96U 1.05U ns 6 tw(RXSTOP15) Pulse width, receive stop bit 1.5 0.96U 1.05U ns 6 tw(RXSTOP2) Pulse width, receive stop bit 2 0.96U 1.05U ns (1) P ns Autoflow Timing Requirements 8 td(CTSL-TX) Delay time, CTS asserted to START bit transmit P End of Table 7-86 1 P = CPU/6 Figure 7-50 UART Receive Timing Waveform 5 4 RXD Figure 7-51 Stop/Idle Start 5 Bit 0 Bit 1 Bit N-1 Bit N 6 Parity Stop Idle Start UART CTS (Clear-to-Send Input) — Autoflow Timing Waveform 8 TXD Bit N-1 Bit N Stop Start Bit 0 CTS Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 237 ADVANCE INFORMATION The universal asynchronous receiver/transmitter (UART) module provides an interface between the DSP and UART terminal interface or other UART based peripheral. UART is based on the industry standard TL16C550 asynchronous communications element, which in turn is a functional upgrade of the TL16C450. Functionally similar to the TL16C450 on power up (single character or TL16C450 mode), the UART can be placed in an alternate FIFO (TL16C550) mode. This relieves the DSP of excessive software overhead by buffering received and transmitted characters. The receiver and transmitter FIFOs store up to 16 bytes including three additional bits of error status per byte for the receiver FIFO. TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Table 7-87 www.ti.com UART Switching Characteristics (See Figure 7-52 and Figure 7-53) No. Parameter Min Max Unit Transmit Timing 1 tw(TXSTART) Pulse width, transmit start bit U-2 U+2 ns 2 tw(TXH) Pulse width, transmit data/parity bit high U-2 U+2 ns ADVANCE INFORMATION 2 tw(TXL) Pulse width, transmit data/parity bit low U-2 U+2 ns 3 tw(TXSTOP1) Pulse width, transmit stop bit 1 U-2 U+2 ns 3 tw(TXSTOP15) Pulse width, transmit stop bit 1.5 1.5 * (U - 2) 1.5 * ('U + 2) ns 3 tw(TXSTOP2) Pulse width, transmit stop bit 2 2 * (U - 2) 2 * ('U + 2) ns P (1) P ns Autoflow Timing Requirements 7 Delay time, STOP bit received to RTS deasserted td(RX-RTSH) End of Table 7-87 1 P = CPU/6 Figure 7-52 UART Transmit Timing Waveform 1 TXD Start Stop/Idle Figure 7-53 2 Bit 0 2 Bit 1 Bit N-1 Bit N 3 Parity Stop Idle Start UART RTS (Request-to-Send Output) — Autoflow Timing Waveform 7 RXD Bit N-1 Bit N Stop Start CTS 7.16 PCIe Peripheral The 2 lane PCI express (PCIe) module on TMS320C6674 provides an interface between the DSP and other PCIe compliant devices. The PCI Express module provides low pin count, high reliability, and high-speed data transfer at rates of 5.0 Gbps per lane on the serial links. For more information, see the Peripheral Component Interconnect Express (PCIe) for KeyStone Devices User Guide (literature number SPRUGS6). 7.17 TSIP Peripheral The telecom serial interface port (TSIP) module provides a glueless interface to common telecom serial data streams. For more information, see the Telecom Serial Interface Port (TSIP) for the C66x DSP User Guide (literature number SPRUGY4). 7.18 EMIF16 Peripheral The EMIF16 module provides an interface between DSP and external memories such as NAND and NOR flash. For more information, see the External Memory Interface (EMIF16) for KeyStone Devices User Guide (literature number SPRUGZ3). 238 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor www.ti.com SPRS692—November 2010 7.19 Packet Accelerator The packet accelerator provides L2 to L4 classification functionalities. It supports classification for Ethernet, VLAN, MPLS over Ethernet, IPv4/6, GRE over IP, and other session identification over IP such as TCP and UDP ports. It maintains 8K multiple-in, multiple-out hardware queues. It also provides checksum capability as well as some QoS capabilities. It enables a single IP address to be used for a multi-core device. It can process up to 1.5 M pps.For more information, see the Packet Accelerator (PA) for KeyStone Devices User Guide (literature number SPRUGS4). The security accelerator provides wire-speed processing on 1-Gbps Ethernet traffic on IPSec, SRTP, and 3GPP Air interface security protocols. It functions on the packet level with the packet and the associated security context being one of these above three types. The security accelerator is coupled with packet accelerator, and receives the packet descriptor containing the security context in the buffer descriptor, and the data to be encrypted/decrypted in the linked buffer descriptor. For more information, see the Security Accelerator (SA) for KeyStone Devices User Guide (literature number SPRUGY6) Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 239 ADVANCE INFORMATION 7.20 Security Accelerator TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.21 Ethernet MAC (EMAC) The Ethernet media access controller (EMAC) modules provide an efficient interface between the TMS320C6674 DSP and the networked community. The EMAC supports 10Base-T (10 Mbits/second [Mbps]), and 100BaseTX (100 Mbps), in half- or full-duplex mode, and 1000BaseT (1000 Mbps) in full-duplex mode, with hardware flow control and quality-of-service (QOS) support. For more information, see the Ethernet Media Access Control (EMAC) for KeyStone Devices User Guide (literature number SPRUGV9) Each device has a unique MAC address. There are two registers to hold these values, MACID1 (0x02620110) and MACID2 (0x02600114). All bits of these registers are defined as follows: ADVANCE INFORMATION Figure 7-54 MACID1 Register 31 0 MACID[31:0] R,+xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx Legend: R = Read only; -x, value is indeterminate Table 7-88 MACID1 Register Field Descriptions Bit Field Description 31-0 MAC ID[31-0] MAC ID End of Table 7-88 Figure 7-55 MACID2 Register 31 24 23 18 17 16 15 0 Reserved Reserved FLOW BCAST MACID[47:32] R+, xxxx xxxx R,+rr rrrr R,+z R,+y R,+xxxx xxxx xxxx xxxx Legend: R = Read only; -x, value is indeterminate Table 7-89 MACID2 Register Field Descriptions Bit Field Description 31-24 Reserved Indeterminate 23-18 Reserved 000000 17 FLOW MAC Flow Control 0 = Off 1 = On 16 BCAST Default m/b-cast reception 0 = Broadcast 1 = Disabled 15-0 MAC ID[47-0] MAC ID End of Table 7-89 240 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.22 Management Data Input/Output (MDIO) The management data input/output (MDIO) module implements the 802.3 serial management interface to interrogate and controls up to 32 Ethernet PHY(s) connected to the device, using a shared two-wire bus. Application software uses the MDIO module to configure the auto-negotiation parameters of each PHY attached to the EMAC, retrieve the negotiation results, and configure required parameters in the EMAC module for correct operation. The module is designed to allow almost transparent operation of the MDIO interface, with very little maintenance from the core processor. For more information, see the Ethernet Media Access Control (EMAC) for KeyStone Devices User Guide (literature number SPRUGV9) Table 7-90 MDIO Timing Requirements No. 1 Parameter Min Max ADVANCE INFORMATION See Figure 7-56 Unit tc(MDCLK) Cycle time, MDCLK 400 ns tw(MDCLKH) Pulse duration, MDCLK high 180 ns tw(MDCLKL) Pulse duration, MDCLK low 180 ns 4 tsu(MDIO-MDCLKH) Setup time, MDIO data input valid before MDCLK high 10 ns 5 th(MDCLKH-MDIO) Hold time, MDIO data input valid after MDCLK high 10 ns tt(MDCLK) Transition time, MDCLK 5 ns End of Table 7-90 Figure 7-56 MDIO Input Timing 1 MDCLK 4 5 MDIO (Input) Table 7-91 MDIO Switching Characteristics See Figure 7-57 No. 7 Parameter td(MDCLKL-MDIO) Min Delay time, MDCLK low to MDIO data output valid Max Unit 100 ns End of Table 7-91 Figure 7-57 MDIO Output Timing 1 MDCLK 7 MDIO (Ouput) Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 241 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.23 Timers The timers can be used to: time events, count events, generate pulses, interrupt the CPU, and send synchronization events to the EDMA3 channel controller. 7.23.1 Timers Device-Specific Information The TMS320C6674 device has eight 64-bit timers in total. Of which Timer0 through Timer3 are dedicated to each of the four CorePacs as a watchdog timer and can also be used as general-purpose timers. Each of other 4 timers can also be configured as a general-purpose timer only, with each timer programmed as a 64-bit timer or as two separate 32-bit timers. ADVANCE INFORMATION When operating in 64-bit mode, the timer counts either VBUS clock cycles or input (TINPLx) pulses (rising edge) and generates an output pulse/waveform (TOUTLx) plus an internal event (TINTLx) on a software-programmable period. When operating in 32-bit mode, the timer is split into two independent 32-bit timers. Each timer is made up of two 32-bit counters: a high counter and a low counter. The timer pins, TINPLx and TOUTLx are connected to the low counter. The timer pins, TINPHx and TOUTHx are connected to the high counter. When operating in Watchdog mode, the timer counts down to zero and generates an event. It is a requirement that software writes to the timer before the count expires, after which the count begins again. If the count ever reaches zero, the timer event output is asserted. Reset initiated by a watch dog timer can be set by programming ‘‘Reset Type Status Register (RSTYPE)’’ on page 215 and the type of reset initiated can set by programming ‘‘Reset Configuration Register (RSTCFG)’’ on page 217. For more information, see the 64-bit Timer (Timer 64) for KeyStone Devices User Guide (literature number SPRUGV5). 7.23.2 Timers Electrical Data/Timing The tables and figures below describe the timing requirements and switching characteristics of Timer0 through Timer7 peripherals. Table 7-92 Timer Input Timing Requirements (see Figure 7-58) No. Min Max Unit 1 tw(TINPH) Pulse duration, high 12C ns 2 tw(TINPL) Pulse duration, low 12C ns End of Table 7-92 Table 7-93 Timer Output Switching Characteristics (see Figure 7-58) No. Parameter Min Max Unit 3 tw(TOUTH) Pulse duration, high 12C - 3 ns 4 tw(TOUTL) Pulse duration, low 12C - 3 ns End of Table 7-93 242 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-58 Timer Timing 1 2 TIMIx 3 4 TIMOx The SRIO port on the TMS320C6674 device is a high-performance, low pin-count interconnect aimed for embedded markets. The use of the RapidIO interconnect in a baseband board design can create a homogeneous interconnect environment, providing even more connectivity and control among the components. RapidIO is based on the memory and device addressing concepts of processor buses where the transaction processing is managed completely by hardware. This enables the RapidIO interconnect to lower the system cost by providing lower latency, reduced overhead of packet data processing, and higher system bandwidth, all of which are key for wireless interfaces. For more information, see the Serial RapidIO (SRIO) for KeyStone Devices User Guide (literature number SPRUGW1). Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 243 ADVANCE INFORMATION 7.24 Serial RapidIO (SRIO) Port TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.25 General-Purpose Input/Output (GPIO) 7.25.1 GPIO Device-Specific Information On the TMS320C6674, the GPIO peripheral pins GP[15:0] are also used to latch configuration pins. For more detailed information on device/peripheral configuration and the C6674 device pin muxing, see ‘‘Device Configuration’’ on page 61. For more information on GPIO, see the General Purpose Input/Output (GPIO) for KeyStone Devices User Guide (literature number SPRUGV1) 7.25.2 GPIO Electrical Data/Timing Table 7-94 GPIO Input Timing Requirements ADVANCE INFORMATION No. Min Max Unit 1 tw(GPOH) Pulse duration, GPOx high 12C ns 2 tw(GPOL) Pulse duration, GPOx low 12C ns End of Table 7-94 Table 7-95 GPIO Output Switching Characteristics No. (1) Parameter Min Max Unit 1 tw(GPOH) Pulse duration, GPOx high 36C - 8 ns 2 tw(GPOL) Pulse duration, GPOx low 36C - 8 ns End of Table 7-95 1 Over recommended operating conditions. Figure 7-59 GPIO Timing 1 2 GPIx 3 4 GPOx 7.26 Semaphore2 The device contains an enhanced Semaphore module for the management of shared resources of the DSP C66x CorePacs. The Semaphore enforces atomic accesses to shared chip-level resources so that the read-modify-write sequence is not broken. The semaphore block has unique interrupts to each of the cores to identify when that core has acquired the resource. Semaphore resources within the module are not tied to specific hardware resources. It is a software requirement to allocate semaphore resources to the hardware resource(s) to be arbitrated. The Semaphore module supports 8 masters and contains 32 semaphores to be used within the system. There are two methods of accessing a semaphore resource: • • 244 Direct Access: A core directly accesses a semaphore resource. If free, the semaphore will be granted. If not, the semaphore is not granted. Indirect Access: A core indirectly accesses a semaphore resource by writing it. Once it is free, an interrupt notifies the CPU that it is available. TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 7.27 Emulation Features and Capability The TMS320C6674 device supports Advanced Event Triggering (AET). This capability can be used to debug complex problems as well as understand performance characteristics of user applications. AET provides the following capabilities: • Hardware Program Breakpoints: specify addresses or address ranges that can generate events such as halting the processor or triggering the trace capture. • Data Watchpoints: specify data variable addresses, address ranges, or data values that can generate events such as halting the processor or triggering the trace capture. • Counters: count the occurrence of an event or cycles for performance monitoring. • State Sequencing: allows combinations of hardware program breakpoints and data watchpoints to precisely generate events for complex sequences. For more information on AET, see the following documents: • Using Advanced Event Triggering to Find and Fix Intermittent Real-Time Bugs application report (literature number SPRA753) • Using Advanced Event Triggering to Debug Real-Time Problems in High Speed Embedded Microprocessor Systems application report (literature number SPRA387) 7.27.2 Trace The C6674 device supports Trace. Trace is a debug technology that provides a detailed, historical account of application code execution, timing, and data accesses. Trace collects, compresses, and exports debug information for analysis. Trace works in real-time and does not impact the execution of the system. For more information on board design guidelines for Trace Advanced Emulation, see the 60-Pin Emulation Header Technical Reference (literature number SPRU655). 7.27.2.1 Trace Electrical Data/Timing Table 7-96 Trace Switching Characteristics (1) (see Figure 7-60) No. Parameter 1 tw(DPnH) 1 2 Pulse duration, DPn/EMUn high Min Max Unit 2.4 ns tw(DPnH)90% Pulse duration, DPn/EMUn high detected at 90% Voh 1.5 ns tw(DPnL) Pulse duration, DPn/EMUn low 2.4 ns 2 tw(DPnL)10% Pulse duration, DPn/EMUn low detected at 10% Voh 3 tsko(DPn) Output skew time, time delay difference between DPn/EMUn pins configured as trace tskp(DPn) Pulse skew, magnitude of difference between high-to-low (tphl) and low-to-high (tplh) propagation delays. tσλδπ_ο(DPn) Output slew rate DPn/EMUn 1.5 -500 ns 500 600 3.3 ps ps V/ns End of Table 7-96 1 Over recommended operating conditions. Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 245 ADVANCE INFORMATION 7.27.1 Advanced Event Triggering (AET) TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 Figure 7-60 www.ti.com Trace Timing A TPLH TPHL 1 2 B 3 C ADVANCE INFORMATION 7.27.3 IEEE 1149.1 JTAG The JTAG interface is used to support boundary scan and emulation of the device. The boundary scan supported allows for an asynchronous TRST and only the 5 baseline JTAG signals (e.g., no EMU[1:0]) required for boundary scan. Most interfaces on the device follow the Boundary Scan Test Specification (IEEE1149.1), while all of the SerDes (SRIO and SGMII) support the AC-coupled net test defined in AC-Coupled Net Test Specification (IEEE1149.6). It is expected that all compliant devices are connected through the same JTAG interface, in daisy-chain fashion, in accordance with the specification. The JTAG interface uses 1.8-V LVCMOS buffers, compliant with the Power Supply Voltage and Interface Standard for Nonterminated Digital Integrated Circuit Specification (EAI/JESD8-5). 7.27.3.1 IEEE 1149.1 JTAG Compatibility Statement For maximum reliability, the C6674 DSP includes an internal pulldown (IPD) on the TRST pin to ensure that TRST will always be asserted upon power up and the DSP's internal emulation logic will always be properly initialized when this pin is not routed out. JTAG controllers from Texas Instruments actively drive TRST high. However, some third-party JTAG controllers may not drive TRST high but expect the use of an external pullup resistor on TRST. When using this type of JTAG controller, assert TRST to initialize the DSP after powerup and externally drive TRST high before attempting any emulation or boundary scan operations. 7.27.3.2 JTAG Electrical Data/Timing Table 7-97 JTAG Test Port Timing Requirements (see Figure 7-61) No. Min 1 tc(TCK) Cycle time, TCK 1a tw(TCKH) 1b tw(TCKL) Max Unit 20 ns Pulse duration, TCK high (40% of tc) 8 ns Pulse duration, TCK low(40% of tc) 8 ns 3 tsu(TDI-TCK) input setup time, TDI valid to TCK high 2 ns 3 tsu(TMS-TCK) input setup time, TMS valid to TCK high 2 ns 4 th(TCK-TDI) input hold time, TDI valid from TCK high 10 ns 4 th(TCK-TMS) input hold time, TMS valid from TCK high 10 ns End of Table 7-97 Table 7-98 JTAG Test Port Switching Characteristics (1) (see Figure 7-61) No. 2 Parameter td(TCKL-TDOV) Delay time, TCK low to TDO valid Min Max 8 Unit ns End of Table 7-98 1 Over recommended operating conditions. 246 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com Figure 7-61 JTAG Test-Port Timing 1 1b 1a TCK 2 TDO TDI / TMS Table 7-99 HS-RTDX Switching Characteristics (1) (see Figure 7-62) No. 4 Parameter td(TCKH-DPn) Delay time, TCK high to DPn/EMUn transition Min Max 3 25 Unit ns tdis(TCKH-DPZ) Disable time, TCK high to DPn/EMUn hi-z 3 25 ns tena(TCKH-DP) Enable time, TCK high to DPn/EMUn driven 3 25 ns tsldp_o(DPn) Output slew rate DPn/EMUn 1 25 V/ns End of Table 7-99 1 Over recommended operating conditions. Figure 7-62 HS-RTDX Timing 1 TCK 2 3 4 DP[n] / EMU[n] Copyright 2010 Texas Instruments Incorporated TMS320C6674 Peripheral Information and Electrical Specifications 247 ADVANCE INFORMATION 4 3 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com ADVANCE INFORMATION 248 TMS320C6674 Peripheral Information and Electrical Specifications Copyright 2010 Texas Instruments Incorporated TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 8 Mechanical Data 8.1 Thermal Data Table 8-1 shows the thermal resistance characteristics for the PBGA - CMH/GMH mechanical package. Table 8-1 Thermal Resistance Characteristics (PBGA Package) [CMH/GMH] No. °C/W 1 RθJC Junction-to-case TBD 2 RθJB Junction-to-board TBD 8.2 Packaging Information The following packaging information reflects the most current released data available for the designated device(s). This data is subject to change without notice and without revision of this document. Copyright 2010 Texas Instruments Incorporated Mechanical Data 249 ADVANCE INFORMATION End of Table 8-1 TMS320C6674 Multicore Fixed and Floating-Point Digital Signal Processor SPRS692—November 2010 www.ti.com 8.3 Package CYP Figure 8-1 CYP (S–PBGA–N841) Pb-Free Plastic Ball Grid Array ADVANCE INFORMATION 250 Mechanical Data Copyright 2010 Texas Instruments Incorporated PACKAGE OPTION ADDENDUM www.ti.com 2-Dec-2010 PACKAGING INFORMATION Orderable Device TMX320C6674CYP Status (1) ACTIVE Package Type Package Drawing FCBGA CYP Pins Package Qty 841 1 Eco Plan TBD (2) Lead/ Ball Finish Call TI MSL Peak Temp (3) Samples (Requires Login) Call TI Call Local Sales Office (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated