ETC 222233860222

BCcomponents
DATA SHEET
MKP 338 6 Y2
Interference suppression film
capacitors
Product specification
New
File under BCcomponents, BC05
2001 Jun 22
BCcomponents
Product specification
Interference suppression film capacitors
MKP RADIAL POTTED TYPE
MKP 338 6 Y2
PITCH 7.5/15/22.5/27.5 mm
PITCH 7.5 mm (bent back lead)
296x12(full_width)
P= 7.5 and 15 mm
P(bent back leads) = 7.5 mm
P = 22.5 and 27.5 mm
CBB333
Fig.1 Simplified outlines.
FEATURES
QUICK REFERENCE DATA(1)
• 7.5 to 27.5 mm lead pitch
• Supplied loose in box, taped on
ammopack or reel
• Consists of a low-inductive wound
cell of metallized polypropylene
film, potted in a flame-retardant
case.
DESCRIPTION
Capacitance range (E12 series)
VALUE
1 to 470 nF
Capacitance tolerance
±20%; ±10%; ±5%
Rated (AC) voltage , 50 to 60 Hz
300 V
Rated (DC) voltage
1000 V
Climatic category
55/105/56/B
Rated temperature
105 °C
APPLICATIONS
Maximum application temperature
105 °C
• For Y2-electromagnetic interference
suppression
Reference specifications
IEC 60384-14 2nd edition and
EN 132400
• Specially designed to meet the
requirements of the “IEC 60384-14
2nd edition, EN 132400”, requiring
for Y2 a 5 kV peak pulse voltage test
and both the UL1414 and
CSA-C22.2 No. 1 specification.
Safety approvals:
250 V
UL1414; note 2
300 V
UL1283; ENEC; note 2
Materials
qualified in accordance with UL94V-O
Safety class
Y2; line bypass and antenna coupling
Notes
DETAIL SPECIFICATION
1. Under development.
For more detailed data and test
requirements see “Type detail
specification HQN-384-14/121”.
2. Pending.
2001 Jun 22
2
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
SAFETY APPROVALS AND SAFETY TEST REPORT
Approvals
SAFETY APPROVALS (X2)
R
R
02
VOLTAGE
VALUE
FILE NUMBERS
UL1414 and
CSA-C22.2 No.1
250 V (AC)
1 nF to 470 nF
pending
UL1283 and
CSA-C22.2 No.8
300 V (AC)
1 nF to 470 nF
pending
ENEC (EN132400)
300 V (AC)
1 nF to 470 nF
pending
VOLTAGE
300 V (AC)
VALUE
1 nF to 470 nF
pending
Safety test report
SAFETY TEST REPORT
CB TEST CERTIFICATE
FILE NUMBERS
The Enec-approval together with the CB-Certificate replace all national approval marks of the following countries
(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany;
Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway, Portugal; Slovenian; Spain; Sweden; Switzerland and
United Kingdom.
2001 Jun 22
3
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
COMPOSITION OF CATALOGUE NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
7.5 mm
338 6
7.5 mm (bent back)
15.0 mm
Y2
22.5 mm
0.1
2
CAPACITANCE
1
3
(numerically)
10
4
100
5
27.5 mm
Example:
104 = 10 x 10 = 100 nF
2222
TYPE
338 6
Y2
338 6
Y2
PACKAGING
loose in box
taped
loose in box
338
6.
XX X
STANDARD DIMENSIONS
lead length 3.5 mm
lead length 5.0 mm
lead length 25.0 mm
pitch 7.5 mm or bent back to 7.5 mm
ALTERNATIVE PITCH SIZES
lead length 3.5 mm
lead length 5.0 mm
lead length 25.0 mm
C-TOL PREFERRED TYPES
60
62
±20%
64
66
±20%
ALTERNATIVE TAPED VERSION
338 6
Y2
taped
ON REQUEST
±20%
6.
±10%
±5%
±10%
±5%
±10%
±5%
±10%
±5%
±10%
±5%
ON REQUEST
61
6.
63
6.
65
6.
67
6.
6.
6.
ALTERNATIVE C-TOL
lead length 3.5 mm
loose in box
338 6
lead length 5.0 mm
lead length 25.0 mm
Y2
pitch 7.5 mm or bent back to 7.5 mm
taped
2001 Jun 22
4
ON REQUEST
6.
6.
6.
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
MKP 338 6 GENERAL DATA
PITCH 7.5 mm
b
l
296x12(full_width)
h
lt
Ødt
P
CBA196
(1) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
Fig.3 Outline.
Specific reference data for the 300 V AC (Y2) capacitors
DESCRIPTION
Tangent of loss angle:
C ≤ 470 nF
Rated voltage pulse slope (dU/dt)R at 420 V
R between leads, for C ≤ 0.33 µF at 100 V; 1 minute
R between leads and case; 100 V; 1 minute
Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s:
Withstanding (AC) voltage between leads and case
at 1 kHz
≤10 × 10−4
VALUE
at 10 kHz
at 100 kHz
≤20 × 10−4
≤100 × 10−4
100 V/µs
>15000 MΩ
>30000 MΩ
3400 V; 1 minute
2100 V; 1 minute
Available 300 V (AC) Y2 versions
PACKAGING
DIMENSIONS
C-tol
±20%
±10%
±5%
±20%
±10%
±5%
±20%
±10%
±5%
±20%
±10%
±5%
lt = 3.5 +1/−0.5 mm
Loose in box
lt = 5.0 ±1.0 mm
lt = 25.0 ±2.0 mm
Ammopack
H = 18.5 mm; for P0 = 12.7 mm
Note
1. Other dimensions for ±10% and ±5% tolerance values.
2001 Jun 22
5
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 338 60...
2222 338 61...; note 1
2222 338 6....; note 1
2222 338 62...
2222 338 63...; note 1
2222 338 6....; note 1
2222 338 64...
2222 338 65...; note 1
2222 338 6....; note 1
2222 338 66...
2222 338 6....; note 1
2222 338 6....; note 1
ORDERING
preferred
on request
on request
preferred
on request
on request
preferred
on request
on request
preferred
on request
on request
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
URac = 300 V (Y2); URdc = 1000 V
loose and taped
CATALOGUE NUMBER
LOOSE IN BOX
C(1)
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
short leads
AMMOPACK
long leads
lt = 3.5+1/−0.5 mm lt = 5.0 ±1.0mm lt = 25.0 ±2.0mm
H = 18.5 mm;
P0 = 12.7 mm
C-tol = ±20%
C-tol = ±20%
catalogue number
last 5 digits
last 5 digits
Pitch = 7.5 ±0.4 mm; dt = 0.50 ±0.05 mm
0.001
2222 338 60102
.. 62102
.. 64102
.. 66102
0.0012
2222 338 60122
.. 62122
.. 64122
.. 66122
0.0015
0.0018
4.0 × 9.0 × 10.0
0.5
2222 338 60152
.. 62152
.. 64152
.. 66152
2222 338 60182
.. 62182
.. 64182
.. 66182
0.0022
2222 338 60222
.. 62222
.. 64222
.. 66222
0.0027
2222 338 60272
.. 62272
.. 64272
.. 66272
2222 338 60332
.. 62332
.. 64332
.. 66332
2222 338 60392
.. 62392
.. 64392
.. 66392
2222 338 60472
.. 62472
.. 64472
.. 66472
2222 338 60562
.. 62562
.. 64562
.. 66562
0.0033
0.0039
0.0047
0.0056
5.0 × 10.5 × 10.0
6.0 × 11.5 × 10.0
0.9
1.0
Note
1. Under development.
2001 Jun 22
6
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
MKP 338 6 GENERAL DATA
296x12(full_width)
PITCH 7.5/15/22.5/27.5 mm
PITCH 7.5 mm (bent back leads)
l
b
l
b
h
h h'
F'
lt
(1)
F
Ødt
P
H
Ødt
10
15
Dimensions in mm.
(1) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
CBA750
Fig.4 Outline.
Specific reference data for the 300 V AC (Y2) capacitors
DESCRIPTION
Tangent of loss angle:
C ≤ 470 nF
Rated voltage pulse slope (dU/dt)R at 615 V
R between leads, for C ≤ 0.33 µF at 100 V; 1 minute
RC between leads, for C > 0.33 µF at 100 V; 1 minute
R between leads and case; 100 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s:
Withstanding (AC) voltage between leads and case
at 1 kHz
≤10 × 10−4
VALUE
at 10 kHz
at 100 kHz
≤20 × 10−4
≤100 × 10−4
100 V/µs
>15000 MΩ
>5000 s
>30000 MΩ
3400 V; 1 minute
2100 V; 1 minute
Available 300 V (AC) Y2 versions
PACKAGING(1)
DIMENSIONS
C-tol
±20%
±10%
±5%
±20%
±10%
±5%
±20%
±10%
±5%
±20%
±10%
±5%
±20%
±10%
±5%
lt = 3.5 ±0.3 mm
Loose in box
lt = 5.0 ±1.0 mm
lt = 25.0 ±2.0 mm
Taped on reel;
bent back
H = 16.0 mm; for P0 = 15.0 mm
Taped on reel
H = 18.5 mm; for P0 = 12.7 mm
Notes
1. Taped on reel pitch = 27.5 mm is not available.
2. Other dimensions for ±10% and ±5% tolerance values.
2001 Jun 22
7
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 338 60...
2222 338 61...; note 2
2222 338 6....; note 2
2222 338 62...
2222 338 63...; note 2
2222 338 6....; note 2
2222 338 64...
2222 338 65...; note 2
2222 338 6....; note 2
2222 338 66...
2222 338 67...; note 2
2222 338 6....; note 2
2222 338 6....
2222 338 6....; note 2
2222 338 6....; note 2
ORDERING
preferred
on request
on request
preferred
on request
on request
preferred
on request
on request
preferred
on request
on request
on request
on request
on request
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
URac = 300 V (Y2); URdc = 1000 V
loose and taped
CATALOGUE NUMBER
LOOSE IN BOX
C(1)
(µF)
DIMENSIONS(2)
b × h (h’) × l
(mm)
short leads
MASS
(g)
lt = 3.5 ±0.3 mm
catalogue number
REEL
long leads
lt = 5.0 ±1.0mm lt = 25.0 ±2.0mm
H = 16.0 mm;
P0 = 15.0 mm
C-tol = ±20%
C-tol = ±20%
last 5 digits
Pitch = 15.0 ±0.4 mm;
dt = 0.60 ±0.06 mm
last 5 digits
pitch = 7.5 mm
(bent back)
0.0068
2222 338 60682
.. 62682
.. 64682
.. 66682
0.0082
2222 338 60822
.. 62822
.. 64822
.. 66822
0.01
5.0 × 11.0 (12.0) × 17.5
1.2
0.012
0.015
0.018
6.0 × 12.0 (14.0) × 17.5
1.4
2222 338 60103
.. 62103
.. 64103
.. 66103
2222 338 60123
.. 62123
.. 64123
.. 66123
2222 338 60153
.. 62153
.. 64153
.. 66153
2222 338 60183
.. 62183
.. 64183
.. 66183
Pitch = 15.0 ±0.4 mm;
dt = 0.80 ±0.08 mm
0.022
0.027
0.033
0.039
0.047
0.056
pitch = 7.5 mm
(bent back)
7.0 × 13.5 (15.0) × 17.5
1.9
8.5 × 15.0 (17.0) × 17.5
2.6
10.0 × 16.5 (18.5) × 17.5
3.1
2222 338 60223
.. 62223
.. 64223
.. 66223
2222 338 60273
.. 62273
.. 64273
.. 66273
2222 338 60333
.. 62333
.. 64333
.. 66333
2222 338 60393
.. 62393
.. 64393
.. 66393
2222 338 60473
.. 62473
.. 64473
.. 66473
2222 338 60563
.. 62563
.. 64563
.. 66563
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm
0.068
0.082
0.1
0.12
0.15
8.5 × 18.0 × 26.0
4.4
10.0 × 19.5 × 26.0
5.5
12.0 × 22.0 × 26.0
7.8
pitch = 7.5 mm
(bent back)
2222 338 60683
.. 62683
2222 338 60823
.. 62823
.. 64683
.. 64823
2222 338 60104
.. 62104
.. 64104
2222 338 60124
.. 62124
.. 64124
2222 338 60154
.. 62154
.. 64154
Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm
pitch = 7.5 mm
(bent back)
0.18
11.0 × 21.0 × 31.0
7.8
2222 338 60184
.. 62184
0.22
13.0 × 23.0 × 31.0
10.4
2222 338 60224
.. 62224
.. 64224
0.27
15.0 × 25.0 × 31.0
12.8
2222 338 60274
.. 62274
.. 64274
18.0 × 28.0 × 31.0
17.2
2222 338 60334
.. 62334
.. 64334
2222 338 60394
.. 62394
.. 64394
18.0 × 28.0 × 31.0
20.4
2222 338 60474
.. 62474
.. 64474
0.33
0.39
0.47
Notes
1. Under development.
2. Dimensions in brackets for bent back leads.
2001 Jun 22
not available
8
.. 64184
not available
BCcomponents
Product specification
Interference suppression film capacitors
CONSTRUCTION
MKP 338 6 Y2
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
Description
In order to withstand vibration and shock tests, it must be
ensured that the stand-off pips are in good contact with the
printed-circuit board:
• Low-inductive wound cell of metallized polypropylene
(PP) film, potted with epoxy resin in a flame-retardant
case
• For pitches ≤15 mm capacitors shall be mechanically
fixed by the leads.
• Radial leads, solder-coated
• Small stand-off pips allow removal of solder flux etc.
during cleaning of the printed-circuit board.
• For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
144x12(halfpage)
3 SECTIONS
The maximum length and width of film capacitors is shown
in Fig.7:
metal spray layer
• Eccentricity as in Fig.7. The maximum eccentricity is
smaller than or equal to the lead diameter of the product
concerned.
• Product height with seating plane as given by
“IEC 60717” as reference: hmax ≤ h + 0.3 mm or
hmax ≤ h’ + 0.3 mm.
MKP metallised polypropylene film
connecting wire
CBA313
Fig.5 Construction for pitch = 7.5 mm.
144x12(halfpage)
bmax = b + 0.3 mm
eccentricity
144x12(halfpage)
2 SECTIONS
metal spray layer
lmax = l + 0.3 mm
CBA116
Fig.7 Lay-out.
Storage temperature
• Storage temperature: Tstg = −25 to +40 °C with RH
maximum 80% without condensation.
MKP metallised polypropylene film
connecting wire
CBA312
Fig.6 Construction for pitch > 7.5 mm.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Mounting
Unless otherwise specified, all electrical values apply to an
ambient temperature of 23 ±1 °C, an atmospheric pressure
of 86 to 106 kPa and a relative humidity of 50 ±2%.
NORMAL USE
The capacitors are designed for mounting on printed-circuit
boards. The capacitors packed in bandoliers are designed
for mounting on printed-circuit boards by means of
automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packaging information”.
2001 Jun 22
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperature and a relative humidity not
exceeding 20%.
9
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
CHARACTERISTICS
Capacitance
CBA505
296x12(full_width)
4
∆C/C
(%)
2
typical
0
max.
-2
-4
min.
-6
-50
0
50
100
Tamb (°C)
Fig.8 Capacitance change at 1 kHz as a function of temperature.
Tangent of loss angle
CBB345
296x12(full_width)
10 3
dissipation
factor
(x 10-4)
10 2
C>
F
47 n
F
10 n
10 1
10 0
10 1
10 2
10 3
10 4
Fig.9 Tangent of loss angle as a function of frequency: typical curves.
2001 Jun 22
10
f (Hz)
220
<C
nF
0
≤ 22
nF
F
47 n
< C≤
nF
10
≤
C
10 5
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
Impedance
CBB321
296x12(full_width)
10 3
Impedance
(Ω)
1 nF
4.7
10 nnF
F
10 2
10
47 n
F
100
nF
1
470
10
nF
0
10-1
10-2
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.10 Impedance as a function of frequency: typical curves for 20% values.
Resonant frequency
CBB322
2
296x12(full_width)
10
f
(MHz)
10 1
Y2
10 0
10
-1
1nF
10 nF
100 nF
1000 nF
C (nF)
Fig.11 Resonant frequency as a function of capacitance: typical curves for 20% values.
2001 Jun 22
11
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb ≤ 105 °C
CBB187
296x12(full_width)
10 3
AC voltage
(V)
10 2
10 1
10 1
10 2
10 3
10 4
10 5
f (Hz)
Fig.12 AC voltage (RMS value) as a function of frequency at Tamb ≤ 105 °C.
CBB320
3
296x12(full_width)
10
AC current
(mA)
10 2
100 nF
47 nF
10 1
10 nF
4.7 nF
10 0
10 -1
10 1
1 nF
10 2
10 3
10 4
Fig.13 AC current (RMS value) as a function of frequency at Tamb ≤ 105 °C.
2001 Jun 22
12
f (Hz)
10 5
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
Insulation resistance
CBA204
296x12(full_width)
10 6
RC
(s)
10 5
10 4
0
20
40
60
80
Tamb(°C)
100
Fig.14 RC product as a function of ambient free air temperature: typical curve.
APPLICATION NOTES
• For Y2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage
of 300 V (AC) ±10% instability.
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 .....
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
– If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by
420 V (DC) and divided by the applied voltage.
2001 Jun 22
13
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
MARKING
Product marking
The capacitors are marked (see Figs 15 to 17) with the
following information:
FRONT FACE
144x12(halfpage)
1. Rated capacitance code in accordance with
“IEC 60062”
1n0 M 300V~
338 6 BC 0133
2. Tolerance on rated capacitance; M = ±20%; K = ±10%;
J = ±5%
Y2
250V~
R
02
3. Rated (AC) voltage (e.g. 300 V)
4. Sub-class (e.g. Y2)
CBB323
5. Manufacturer’s type designation (e.g. 338 6)
Fig.15 Example of marking for a capacitor with
original pitch = 7.5 and 10 mm.
6. Code for dielectric material (MKP) for capacitors with
original pitch = 15, 22.5 and 27.5 mm
7. Manufacturer (BC)
8. Year and week of manufacture (e.g. 0133).
HEAD FACE
FRONT FACE
144x12(halfpage)
33n M
338 6
BC 0133
MKP
300V~ 250V~
Y2
R
02
CBB324
Fig.16 Example of marking for a capacitor with
original pitch = 15 mm.
HEAD FACE
144x12(halfpage)
150n M
300V ~
338 6 MKP
02
BC 0133 Y2
250V~
R
CBB325
Fig.17 Example of marking for a capacitor with
original pitch = 22.5 or 27.5 mm.
2001 Jun 22
14
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
Package marking
The package containing the capacitors is marked as shown Fig.18.
Barcode label marking
LINE
MARKING EXPLANATION
1
Manufacturer’s name
2
Country of origin
3
Sub-family
4
Type description and sub class
5
Capacitance value, tolerance, voltage and
climatic category (“IEC 60068-1”)
6
Safety approvals
7
Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
Work order: WO
Wage number of final inspection (only for
capacitors with original pitch = 7.5 and 10 mm)
8
Product type description
9
Quantity and production period, year and week
code
10
Product code (12NC)
Fig.18 Barcode label.
2001 Jun 22
15
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
QUICK REFERENCE TEST REQUIREMENTS
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”
load 10 N; 10 s
Bending:
“IEC 60068-2-21”
load 5 N; 4 × 90 °
Resistance to
soldering heat:
“IEC 60068-2-20”
solder bath: 260 °C; 10 s
no visible damage
legible marking
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Rapid change of temperature: 5 cycles
“IEC 60068-2-14”
1 cycle = 30 minutes at −55 °C and
30 minutes at 105 °C
|∆C/C| ≤ 5%
Vibration:
“IEC 60068-2-6”
10 to 55 Hz;
amplitude 0.75 mm; 6 hours
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Shock:
“IEC 60068-2-27”
half sinewave; 490 m/s2; 11 ms
Climatic sequence
Dry heat:
“IEC 60068-2-2”
16 hours; 105 °C
Damp heat, cyclic, test Db,
first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
2 hours; −55 °C
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Voltage proof:
“IEC 60384-14”
Rins ≥ 50% of specified value
Vp = 2250 V (DC); 1 minute
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”
56 days; 40 °C;
90 to 95% RH no load
Vp = 2250 V (DC); 1 minute
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Rins ≥ 50% of specified value
Endurance (AC):
“IEC 60384-14”
2001 Jun 22
3 × 5 kV pulse voltage
1000 hours; 1.7 × URac at 105 °C;
once per hour; 0.1 s; 1000 V (RMS) via
resistor of 47 Ω;
Vp = 2250 V (DC); 1 minute
16
|∆C/C| ≤10%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Rins ≥ 50% of specified value
BCcomponents
Product specification
Interference suppression film capacitors
PROCEDURE
(quick reference)
TEST
MKP 338 6 Y2
REQUIREMENTS
|∆C/C| ≤ 10%
Charge and discharge:
“IEC 60384-14”
10000 cycles; 5 ms;
1.5 × dV/dt
Passive flammability:
“IEC 60384-14”
class B
Active flammability:
“IEC 60384-14”
20 × 5 kV discharge
Heat storage:
“IEC 60384-14”
1000 hours; 105 °C
Resistance to soldering heat
with preheating:
“IEC 60384-14”
preheating: 105 °C;
solder bath: 260 °C; 10 s
Active flammability test
voltage proof up to 2 × peak impulse
voltage of 4.13 or until breakdown
(100 V/sec, current limited 2mA)
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Rins ≥ 50% of specified value
no burning
no burning
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
failed capacitors connected to a
250 V (AC) power supply during
5 minutes.
Note
1. Measuring frequency 10 kHz for C ≤ 1 µF and 1 kHz for C > 1 µF.
2001 Jun 22
17
no burning