BCcomponents DATA SHEET KP 460 to 464 Polypropylene film foil capacitors Product specification Supersedes data of 2001 Sep 13 File under BCcomponents, BC05 2002 Oct 09 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 KP AXIAL EPOXY LACQUERED TYPE 296x12(full_width) CBA369 Fig.1 Simplified outlines. FEATURES • Supplied loose in box, taped on reel or unidirectional. QUICK REFERENCE DATA DESCRIPTION VALUE Capacitance range (E12 series) 47 to 62000 pF Capacitance tolerance ±5% (E24 series); ±2% (E24, E48 series); ±1% (E24, E48, E96 series) APPLICATIONS Rated (DC) voltage 63 V; 160 V; 250 V; 400 V; 630 V • In circuits where close tolerance, reliability and low losses are of prime importance, for example: tuned circuits, filter and timing networks. Rated (AC) voltage 40 V; 63 V; 125 V; 160 V; 200 V • Intermediate values are available of the E96 series. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-13/101”. 2002 Oct 09 Climatic category 40/100/56 Rated temperature 85 °C Maximum application temperature 100 °C Reference specification IEC 60384-13 Stability class for: 63; 160; 250 V versions class 1 400; 630 V versions class 2 2 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 COMPOSITION OF CATALOGUE NUMBER TYPE AND VOLTAGES 460 63 V 461 160 V MULTIPLIER (nF) CAPACITANCE (numerically) 0.0001 9 0.001 1 0.01 2 0.1 3 Example: 1003 = 100 x 0.1 = 10 nF 2222 TYPE 460 461 PACKAGING Taped on reel Taped on reel 46. LEAD CONFIGURATION AND TAPE DISTANCE tape distance 63.5 mm X XXX X PREFERRED TYPES C-TOL 63 V ±1% 8 ±2% 7 ±1% tape distance 63.5 mm 160 V 8 ±2% 7 ON REQUEST Taped on reel 460 Loose in box tape distance 63.5 mm lead length 30.0 or 28.0 mm Unidirectional Taped on reel 461 Loose in box tape distance 63.5 mm lead length 30.0 or 28.0 mm Unidirectional 2002 Oct 09 3 ±5% 6 ±1% 4 ±2% 3 ±5% 2 ±1% 1 ±2% 0 ±5% 6 ±1% 4 ±2% 3 ±5% 2 ±1% 1 ±2% 0 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 TYPE AND VOLTAGES 462 250 V MULTIPLIER (nF) 463 400 V 0.0001 9 630 V 0.001 1 0.01 2 0.1 3 464 CAPACITANCE (numerically) Example: 1003 = 100 x 0.1 = 10 nF 2222 TYPE PACKAGING 46. LEAD CONFIGURATION AND TAPE DISTANCE 462 Taped on reel tape distance 63.5 mm 463 Taped on reel tape distance 63.5 mm 464 Taped on reel tape distance 63.5 mm Taped on reel tape distance 63.5 mm Loose in box lead length 30.0 or 28.0 mm X XXX X PREFERRED TYPES C-TOL ±1% ±2% ±1% ±2% ±1% ±2% 250 V 8 7 ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% 6 4 3 2 1 0 400 V 630 V 8 7 8 7 ON REQUEST 462 Unidirectional 463 Taped on reel tape distance 63.5 mm Loose in box lead length 30.0 or 28.0 mm Unidirectional 464 Taped on reel tape distance 63.5 mm Loose in box lead length 30.0 or 28.0 mm Unidirectional 2002 Oct 09 4 6 4 3 2 1 0 6 4 3 2 1 0 BCcomponents Product specification Polypropylene film foil capacitors KP 460 KP 460 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.4 Outlines. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: 5000 pF < C ≤ 20000 pF 20000 pF < C ≤ 47000 pF C > 47000 pF Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads; at 10 V; 1 minute R between interconnected leads and case; 10 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤15 × 10−4 ≤25 × 10−4 ≤40 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 126 V; 1 minute 400 V; 1 minute Available 63 V DC versions PACKAGING Taped on reel Loose in box Unidirectional; notes C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 460 8.... 2222 460 7.... 2222 460 6.... 2222 460 4.... 2222 460 3.... 2222 460 2.... 2222 460 1.... 2222 460 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2002 Oct 09 5 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 460 URdc = 63 V; URac = 40 V CATALOGUE NUMBER 2222 460 ..... AND PACKAGING TAPED ON REEL C (E 24) (pF) DIMENSIONS dmax × lmax (mm) MASS (g) TAPE DISTANCE 63.5 mm C-tol = ±2% LOOSE IN BOX C-tol = ±1% last 5 digits of catalogue number UNIDIRECTIONAL C-tol = ±2% SPQ SPQ C-tol = ±1% last 5 digits of catalogue number SPQ lt = 30.0 mm; dt = 0.60 ±0.06 mm 6800 0.5 76802 86802 06802 16802 7500 0.5 77502 87502 07502 17502 0.6 78202 88202 08202 18202 0.6 79102 89102 09102 19102 0.6 71003 81003 8200 5.0 × 11.0 9100 2500 250 lt = 28.0 mm; dt = 0.60 ±0.06 mm 10000 11000 0.6 71103 81103 12000 0.7 71203 81203 13000 0.8 71303 81303 0.7 71503 81503 16000 0.7 71603 81603 18000 0.8 71803 81803 20000 0.8 72003 82003 22000 0.9 72203 82203 24000 0.9 72403 82403 1.0 72703 82703 1.1 73003 83003 1.2 73303 83303 1.2 73603 83603 1.3 73903 83903 1.4 74303 84303 1.5 74703 84703 1.6 75103 85103 1.7 75603 85603 1.8 76203 86203 15000 27000 6.0 × 15.0 6.5 × 15.0 30000 33000 7.0 × 15.0 36000 39000 43000 47000 51000 56000 62000 2002 Oct 09 7.5 × 15.0 8.0 × 15.0 8.5 × 15.0 6 1500 250 1500 250 1000 200 1000 150 1000 150 1000 125 1000 BCcomponents Product specification Polypropylene film foil capacitors KP 461 KP 461 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.5 Outlines. Specific reference data for the 160 V DC capacitors DESCRIPTION Tangent of loss angle: 1000 pF < C ≤ 5000 pF 5000 pF < C ≤ 20000 pF 20000 pF < C ≤ 39000 pF Rated voltage pulse slope (dU/dt)R at 160 V (DC) R between leads; at 100 V; 1 minute R between interconnected leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4 ≤25 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 320 V; 1 minute 400 V; 1 minute Available 160 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 461 8.... 2222 461 7.... 2222 461 6.... 2222 461 4.... 2222 461 3.... 2222 461 2.... 2222 461 1.... 2222 461 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2002 Oct 09 7 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 461 URdc = 160 V; URac = 63 V CATALOGUE NUMBER 2222 461 ..... AND PACKAGING TAPED ON REEL C (E 24) (pF) DIMENSIONS dmax × lmax (mm) MASS (g) TAPE DISTANCE 63.5 mm C-tol = ±2% LOOSE IN BOX C-tol = ±1% last 5 digits of catalogue number UNIDIRECTIONAL C-tol = ±2% SPQ SPQ C-tol = ±1% last 5 digits of catalogue number SPQ lt = 30.0 mm; dt = 0.60 ±0.06 mm 3600 0.5 73602 83602 03602 13602 3900 0.5 73902 83902 03902 13902 0.5 74302 84302 04302 14302 0.5 74702 84702 04702 14702 5100 0.5 75102 85102 05102 15102 5600 0.5 75602 85602 05602 15602 6200 0.6 76202 86202 06202 16202 4300 4700 5.0 × 11.0 2500 250 lt = 28.0 mm; dt = 0.60 ±0.06 mm 6800 0.4 76802 86802 7500 0.7 77502 87502 8200 0.6 78202 88202 9100 0.6 79102 89102 0.7 71003 81003 11000 0.7 71103 81103 12000 0.7 71203 81203 13000 0.8 71303 81303 15000 0.8 71503 81503 16000 0.9 71603 81603 0.9 71803 81803 1.0 72003 82003 1.1 72203 82203 1.1 72403 82403 1.2 72703 82703 1.3 73003 83003 1.4 73303 83303 1.5 73603 83603 1.6 73903 83903 10000 18000 6.0 × 15.0 6.5 × 15.0 20000 22000 24000 27000 30000 33000 36000 39000 2002 Oct 09 7.0 × 15.0 7.5 × 15.0 8.0 × 15.0 8.5 × 15.0 8 1500 250 1500 250 1000 200 1000 150 1000 150 1000 125 1000 BCcomponents Product specification Polypropylene film foil capacitors KP 462 KP 462 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.6 Outlines. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 1 000 pF < C ≤ 5000 pF 5 000 pF < C ≤ 20000 pF 20 000 pF < C ≤ 22000 pF Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads; at 100 V; 1 minute R between interconnected leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4 ≤25 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 500 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 462 8.... 2222 462 7.... 2222 462 6.... 2222 462 4.... 2222 462 3.... 2222 462 2.... 2222 462 1.... 2222 462 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2002 Oct 09 9 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 462 URdc = 250 V; URac = 125 V CATALOGUE NUMBER 2222 462 ..... AND PACKAGING TAPED ON REEL C (E 24) (pF) DIMENSIONS dmax × lmax (mm) MASS (g) TAPE DISTANCE 63.5 mm C-tol = ±2% LOOSE IN BOX C-tol = ±1% last 5 digits of catalogue number UNIDIRECTIONAL C-tol = ±2% SPQ SPQ C-tol = ±1% last 5 digits of catalogue number SPQ lt = 30.0 mm; dt = 0.60 ±0.06 mm 1200 0.5 71202 81202 01202 11202 1300 0.5 71302 81302 01302 11302 1500 0.4 71502 81502 01502 11502 1600 0.5 71602 81602 01602 11602 1800 0.6 71802 81802 01802 11802 2000 5.0 × 11.0 2500 250 0.6 72002 82002 02002 12002 2200 0.5 72202 82202 02202 12202 2400 0.5 72402 82402 02402 12402 2700 0.5 72702 82702 02702 12702 3000 0.5 73002 83002 03002 13002 3300 0.5 73302 83302 03302 13302 lt = 28.0 mm; dt = 0.60 ±0.06 mm 3600 0.5 73602 83602 3900 0.5 73902 83902 4300 0.6 74302 84302 0.6 74702 84702 0.6 75102 85102 5600 0.6 75602 85602 6200 0.7 76202 86202 6800 0.7 76802 86802 7500 0.7 77502 87502 8200 0.8 78202 88202 0.8 79102 89102 4700 5100 9100 6.0 × 15.0 6.5 × 15.0 10000 0.9 71003 81003 11000 0.9 71103 81103 1.0 71203 81203 1.0 71303 81303 1.1 71503 81503 1.2 71603 81603 1.3 71803 81803 1.4 72003 82003 1.5 72203 82203 12000 7.0 × 15.0 13000 15000 16000 18000 20000 22000 2002 Oct 09 7.5 × 15.0 8.0 × 15.0 8.5 × 15.0 10 1500 250 1500 250 1000 200 1000 150 1000 150 1000 125 1000 BCcomponents Product specification Polypropylene film foil capacitors KP 463 KP 463 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax Ødt Ø1.3 lt lmax 16.5 lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.7 Outlines. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 1000 pF 1 000 pF < C ≤ 5000 pF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads; at 100 V; 1 minute R between interconnected leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz ≤5 × 10−4 ≤5 × 10−4 VALUE at 100 kHz − ≤10 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 800 V; 1 minute 800 V; 1 minute at 1MHz(1) ≤10 × 10−4 − Note 1. For unidirectional capacitors ≤13 × 10−4. Available 400 V DC versions PACKAGING Taped on reel; notes Loose in box Unidirectional C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 463 8.... 2222 463 7.... 2222 463 6.... 2222 463 4.... 2222 463 3.... 2222 463 2.... 2222 463 1.... 2222 463 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2002 Oct 09 11 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 463 URdc = 400 V; URac = 160 V CATALOGUE NUMBER 2222 463 ..... AND PACKAGING TAPED ON REEL C (E 24) (pF) DIMENSIONS dmax × lmax (mm) MASS (g) TAPE DISTANCE 63.5 mm C-tol = ±2% LOOSE IN BOX C-tol = ±1% last 5 digits of catalogue number UNIDIRECTIONAL C-tol = ±2% SPQ SPQ C-tol = ±1% last 5 digits of catalogue number SPQ lt = 30.0 mm; dt = 0.60 ±0.06 mm 620 0.5 76201 86201 06201 16201 680 0.5 76801 86801 06801 16801 0.5 77501 87501 07501 17501 0.5 78201 88201 08201 18201 910 0.5 79101 89101 09101 19101 1000 0.5 71002 81002 01002 11002 1100 0.5 71102 81102 01102 11102 750 820 5.0 × 11.0 2500 250 lt = 28.0 mm; dt = 0.60 ±0.06 mm 1200 0.5 71202 81202 1 300 0.5 71302 81302 1500 0.5 71502 81502 0.5 71602 81602 1800 0.5 71802 81802 2000 0.5 72002 82002 2200 0.5 72202 82202 0.5 72402 82402 0.6 72702 82702 1600 2400 2700 6.0 × 15.0 6.5 × 15.0 3000 0.7 73002 83002 3300 0.7 73302 83302 0.7 73602 83602 0.8 73902 83902 0.8 74302 84302 0.9 74702 84702 3600 7.0 × 15.0 3900 4300 4700 7.5 × 15.0 5100 0.9 75102 85102 5600 1.0 75602 85602 1.0 76202 86202 1.1 76802 86802 1.2 77502 87502 1.3 78202 88202 6200 8.0 × 15.0 6800 7500 8200 2002 Oct 09 8.5 × 15.0 12 1500 250 1500 250 1000 200 1000 150 1000 150 1000 125 1000 BCcomponents Product specification Polypropylene film foil capacitors KP 464 KP 464 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.8 Outlines. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 560 pF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads; at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 at 1 MHz(1) ≤10 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 1260 V; 1 minute 1260 V; 1 minute Note 1. For unidirectional capacitors ≤13 × 10−4. Available 630 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 464 8.... 2222 464 7.... 2222 464 6.... 2222 464 4.... 2222 464 3.... 2222 464 2.... 2222 464 1.... 2222 464 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2002 Oct 09 13 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 464 URdc = 630 V; URac = 200 V CATALOGUE NUMBER 2222 464 ..... AND PACKAGING TAPED ON REEL C (E 24) (pF) DIMENSIONS dmax × lmax (mm) MASS (g) TAPE DISTANCE 63.5 mm C-tol = ±2% LOOSE IN BOX C-tol = ±1% last 5 digits of catalogue number UNIDIRECTIONAL C-tol = ±2% SPQ SPQ C-tol = ±1% last 5 digits of catalogue number SPQ lt = 30.0 mm; dt = 0.60 ±0.06 mm 47 0.4 74709 84709 04709 14709 51 0.4 75109 85109 05109 15109 56 0.4 75609 85609 05609 15609 62 0.4 76209 86209 06209 16209 68 0.4 76809 86809 06809 16809 75 0.4 77509 87509 07509 17509 82 0.4 78209 88209 08209 18209 91 0.4 79109 89109 09109 19109 100 0.4 71001 81001 01001 11001 110 0.4 71101 81101 01101 11101 120 0.4 71201 81201 01201 11201 130 0.5 71301 81301 01301 11301 150 0.4 71501 81501 01501 11501 5.0 × 11.0 0.4 71601 81601 01601 11601 180 0.5 71801 81801 01801 11801 200 0.5 72001 82001 02001 12001 220 0.6 72201 82201 02201 12201 240 0.6 72401 82401 02401 12401 270 0.6 72701 82701 02701 12701 300 0.7 73001 83001 03001 13001 330 0.4 73301 83301 03301 13301 360 0.4 73601 83601 03601 13601 390 0.5 73901 83901 03901 13901 430 0.5 74301 84301 04301 14301 470 0.5 74701 84701 04701 14701 510 0.5 75101 85101 05101 15101 560 0.5 75601 85601 05601 15601 160 2002 Oct 09 14 2500 250 1000 BCcomponents Product specification Polypropylene film foil capacitors KP 464 KP 464 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax Ødt Ø1.3 lt lmax 16.5 lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.9 Outlines. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 1000 pF 1 000 pF < C ≤ 4700 pF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads; at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz ≤5 × 10−4 ≤5 × 10−4 VALUE at 100 kHz − ≤15 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 1260 V; 1 minute 1260 V; 1 minute at 1 MHz ≤10 × 10−4 − Available 630 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 464 8.... 2222 464 7.... 2222 464 6.... 2222 464 4.... 2222 464 3.... 2222 464 2.... 2222 464 1.... 2222 464 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2002 Oct 09 15 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 URdc = 630 V; URac = 200 V CATALOGUE NUMBER 2222 464 ..... AND PACKAGING TAPED ON REEL C (E 24) (pF) DIMENSIONS dmax × lmax (mm) MASS (g) LOOSE IN BOX TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% last 5 digits of catalogue number SPQ SPQ 1500 250 1500 250 1000 200 1000 150 1000 150 1000 125 lt = 28.0 mm; dt = 0.60 ±0.06 mm 620 0.5 76201 86201 680 0.5 76801 86801 750 0.5 77501 87501 820 0.5 78201 88201 0.5 79101 89101 910 6.0 × 15.0 1000 0.5 71002 81002 1100 0.5 71102 81102 1200 0.5 71202 81202 1300 0.6 71302 81302 1500 0.6 71502 81502 0.7 71602 81602 1600 6.5 × 15.0 1800 0.7 71802 81802 2000 0.8 72002 82002 0.9 72202 82202 0.9 72402 82402 0.9 72702 82702 1.0 73002 83002 2200 7.0 × 15.0 2400 2700 3000 7.5 × 15.0 3300 3600 8.0 × 15.0 3900 4300 4700 2002 Oct 09 8.5 × 15.0 1.1 73302 83302 1.2 73602 83602 1.3 73902 83902 1.4 74302 84302 1.5 74702 84702 16 BCcomponents Product specification Polypropylene film foil capacitors CONSTRUCTION KP 460 to 464 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK Description The capacitors shall be mechanically fixed by the leads. • Low-inductive wound cell of metal foil and a polypropylene film SOLDERING CONDITIONS • Protected by a hard, water-repellent solvent-resistant blue epoxy lacquer The capacitance stability is dependent on the maximum temperature the capacitor reaches during soldering. Figure 11 shows the typical effect of ∆C/C as a function of soldering time under the worst possible mounting conditions (horizontal on the PCB, minimum possible pitch) and with 80 °C preheating. • Axial iron leads, solder-coated. 144x12(halfpage) lead - tin foil Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. polypropylene film RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS connecting wire CBA371 Fig.10 Construction. Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. Mounting NORMAL USE For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. The capacitors are suitable for vertical or horizontal mounting on printed-circuit boards. The capacitors packed on bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. CBA372 296x12(full_width) 0.4 ∆C/C (%) 0 -0.4 -0.8 0 2 4 6 Fig.11 ∆C/C as a function of soldering time.∆C/C 2002 Oct 09 17 8 soldering time (s) 10 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CHARACTERISTICS Capacitance • Temperature coefficient: – between −40 and +20 °C for C ≤ 1000 pF: −(125 ±125) × 10−6/K – between −40 and +20 °C for C > 1000 pF: −(125 ±60) × 10−6/K – between +20 and +100 °C: −(250 ±120) × 10−6/K. CBA373 2 296x12(full_width) ∆C/C (%) max. 1 typical 0 min. -1 -2 -3 -40 0 40 80 Tamb (°C) Fig.12 Capacitance change at 1 kHz as a function of ambient temperature. Maximum DC voltage as a function of temperature CBA836 1.2 296x12(full_width) factor 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (°C) Fig.13 Multiplying factor for DC voltage as a function of temperature. 2002 Oct 09 18 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Maximum RMS voltage (sinewave) as a function of frequency CBA374 296x12(full_width) 10 2 AC voltage (V) 10 1 68 00 0 62 00 22 pF 0 pF 00 pF 10 0 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.14 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 63 V. CBA896 296x12(full_width) 10 2 AC voltage (V) 10 1 68 00 0 pF 0 00 62 00 22 pF 10 0 10 4 pF 10 5 10 6 10 7 f (Hz) Fig.15 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 63 V. 2002 Oct 09 19 10 8 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA375 2 296x12(full_width) 10 AC voltage (V) 10 1 00 36 pF 0 00 10 0 00 pF 39 pF 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.16 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 160 V. CBA897 2 296x12(full_width) 10 AC voltage (V) 10 1 36 00 pF 00 0 10 00 pF 39 0 pF 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.17 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 160 V. 2002 Oct 09 20 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA376 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 24 00 pF 68 00 22 pF 00 0p F 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.18 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 250 V. CBA898 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 24 00 pF 68 00 22 pF 00 0p F 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.19 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 250 V. 2002 Oct 09 21 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA377 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 11 33 00 p 00 F p 00 0p F F 12 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.20 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 400 V. CBA904 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 11 33 00 p 00 F p 00 0p F F 12 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.21 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 400 V. 2002 Oct 09 22 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA378 3 296x12(full_width) 10 AC voltage (V) 10 2 47 20 10 1 pF 0p F 10 00 pF 68 00 10 0 10 4 10 5 10 6 pF 10 7 f (Hz) 10 8 Fig.22 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 630 V. CBA900 296x12(full_width) 10 3 AC voltage (V) 10 2 47 20 10 1 pF 0p F 10 00 pF 68 00 10 0 10 4 10 5 10 6 pF 10 7 f (Hz) 10 8 Fig.23 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 630 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω × C × U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 14 to 23. 2002 Oct 09 23 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Tangent of loss angle CBA380 296x12(full_width) 10 dissipation factor (x 10-4) 1 0.1 10 1 10 2 10 4 10 3 10 5 10 6 f (Hz) 10 7 Fig.24 Tangent of loss angle as a function of frequency: typical curve. Insulation resistance CBA204 296x12(full_width) 10 6 RC (s) 10 5 10 4 0 20 40 60 80 Tamb(°C) Fig.25 RC product as a function of ambient free air temperature: typical curve. Inductance • L dependent on lead and capacitor length: ≤10 nH/cm. 2002 Oct 09 24 100 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Maximum allowed component temperature rise (∆ ∆T) as a function of the ambient temperature (Tamb) CBA764 12 296x12(full_width) ∆T (°C) 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (°C) Fig.26 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of body dimensions in mW/°°C Table 1 Heat conductivity dmax × lmax (mm) G (mW/°°C) 5.0 × 11.0 2.7 5.5 × 15.0 4.3 6.0 × 15.0 4.7 7.0 × 15.0 5.3 7.5 × 15.0 5.7 8.0 × 15.0 6.3 8.5 × 15.0 6.7 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter “Introduction”, section “Maximum power dissipation”. The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more details) or calculated by ∆T = P ⁄ G : • ∆T = component temperature rise (°C). • P = power dissipation of the component (mW). • G = heat conductivity of the component (mW/°C). 2002 Oct 09 25 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Measuring the component temperature Application note and limiting conditions A thermocouple must be attached to the capacitor body as in Fig.27. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 144x12(halfpage) 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. thermocouple CBA765 For all other pulses following equation must be fulfilled: Fig.27 Mounting the thermocouple. T dU 2 dU 2 × ∫ -------- × dt < U Rdc × -------- dt dt rated 0 The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). T is the pulse duration. The temperature rise is given by ∆T = T c – T amb . 4. The maximum component surface temperature rise must be lower than the limits in Fig.26. To avoid radiation or convection, the capacitor should be tested in a wind-free box. 5. The maximum component surface temperature must be lower than 100 °C. 6. The capacitance drift is influenced by the soldering conditions (see section “Soldering conditions” for more details). 2002 Oct 09 26 BCcomponents Product specification Polypropylene film foil capacitors MARKING KP 460 to 464 MARKING EXAMPLE Product marking 8n2 The capacitors are marked in black ink with the following information: G 63 1. Rated capacitance code in accordance with “IEC 60062” BC. KPK2 (see Table 2) 2. Tolerance on rated capacitance: F = ±1%; G ±2%; J = ±5% 3. Rated (DC) voltage (e.g. 63 V) 4. Code for dielectric material (KP) 5. Production date code in accordance with “IEC 60062; clause 5” 6. Manufacturer. Table 2 Letter codes for year and numbers for month of production YEAR LETTER CODE MONTH CODE 1998 K January 1 1999 L February 2 2000 M March 3 2001 N April 4 2002 P May 5 2003 R June 6 2004 S July 7 2005 T August 8 2006 U September 9 O 2007 V October 2008 W November N 2009 X December D 2002 Oct 09 27 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Package marking The package containing the capacitors is marked as shown in Fig.28. Barcode label marking LINE MARKING EXPLANATION 1 Manufacturer's name 2 Country of origin 3 Sub-family 4 Type description 5 Capacitance value, tolerance, voltage and climatic category (“IEC 60068-1”) 6 − 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) Fig.28 Barcode label. 2002 Oct 09 28 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 QUICK REFERENCE TEST REQUIREMENTS TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile: “IEC 60068-2-21” load 10 N; 10 s Bending: “IEC 60068-2-21” load 5 N; 4 × 90 ° no visible damage legible marking ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Torsion: 2 × 180 ° Resistance to soldering heat: “IEC 60068-2-20” solder bath: 260 °C; 5 s Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes Robustness of component Vibration: “IEC 60068-2-6” 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours Shock: “IEC 60068-2-27” half sinewave; 490 m/s2; 11 ms ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 50% of specified value Climatic sequence Dry heat: “IEC 60068-2-2” 16 hours; 100 °C Damp heat, cyclic, test Db, first cycle: “IEC 60068-2-30” Cold: “IEC 60068-2-1” ∆C/C ≤ 1% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) 2 hours; −40 °C Rins ≥ 50% of specified value Damp heat, cyclic, test Db, remaining cycles: “IEC 60068-2-30” Other applicable tests Damp heat, steady state: “IEC 60068-2-3” 56 days; 40 °C; 90 to 95% RH Endurance (DC): “IEC 60384-13” 1000 hours; 1.5 × URdc; 85 °C 1.05 × URdc; 100 °C Variation of capacitance with temperature: “IEC 60384-13” static method; one cycle Heat storage: “IEC 60384-13” 1000 hours; 100 °C Resistance to soldering heat with preheating: “IEC 60384-13” body temperature: 100 °C; bath temperature: 260 °C; dwell time: 5 s ∆C/C ≤ 1% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 50% of specified value 2002 Oct 09 ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 100% of specified value ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 10000 MΩ 29 ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF)