2SA2081 Silicon PNP Epitaxial ADE-208-1477 (Z) Rev.0 Feb. 2002 Features • Low frequency amplifier Outline CMPAK 3 1 2 1. Emitter 2. Base 3. Collector 2SA2081 Absolute Maximum Ratings (Ta = 25 °C) Item Symbol Ratings Unit Collector to base voltage VCBO –55 V Collector to emitter voltage VCEO –55 V Emitter to base voltage VEBO –5 V Collector current IC –100 mA Collector power dissipation PC* 150 mW Junction temperature Tj 150 °C Storage temperature Tstg –55 to +150 °C *Value on the glass epoxy board (10 mm x 10 mm x 0.7 mm) Electrical Characteristics (Ta = 25 °C) Item Symbol Min Typ Max Unit Test conditions Collector to base breakdown voltage V(BR)CBO –55 V IC = –10 µA, IE = 0 Collector to emitter breakdown voltage V(BR)CEO –55 V IC = –1 mA, RBE = ∞ Emitter to base breakdown voltage V(BR)EBO –5 V IE = –10 µA, IC = 0 Collector cutoff current ICBO –0.5 µA VCB = –30 V, IE = 0 Emitter cutoff current IEBO –0.5 µA VEB = –2 V, IC = 0 DC current transfer ratio hFE* 160 800 VCE = –12 V, IC = –2 mA Collector to emitter saturation voltage VCE(sat) –0.5 V IC = –10 mA, IB = –1 mA Base to emitter voltage VBE –0.75 V VCE = –12 V, IC = –2 mA 1 Notes: 1. The 2SA2081 is grouped by hFE as follows. Grade C D E Mark CC CD CE hFE 160 to 320 250 to 500 400 to 800 Rev.0, Feb. 2002, page 2 of 6 2SA2081 PC* (mW) Collector Power Dissipation Maximum Collector Dissipation Curve 150 100 Collector Current IC (mA) –30 50 *Value on the glass epoxy board (10 mm x 10 mm x 0.7 mm) 0 50 100 –20 –6 –15 –4 –10 –2 –5 µA Pulse test 0 150 Typical Transfer Characteristics IB = 0 –2 –4 –6 –8 –10 Collector to Emitter Voltage VCE (V) 10,000 DC Current Transfer Ratio vs. Collector Current VCE = –12 V Pulse test hFE VCE = –12 V Pulse test –10m DC Current Transfer Ratio IC (A) –100m –25 –8 Ambient Temperature Ta (°C) Collector Current Typical Output Characteristics –10 1,000 –1m –100µ –10µ 0 –0.2 –0.4 –0.6 Base to Emitter Voltage –0.8 –1.0 VBE (V) 100 10 –10 µ –100 µ –1 m Collector Current –10 m –50 m IC (A) Rev.0, Feb. 2002, page 3 of 6 Collector Output Capacitance Cob (pF) 2SA2081 Rev.0, Feb. 2002, page 4 of 6 Collector Output Capacitance vs. Collector to Base Voltage 50 f = 1 MHz IE = 0 20 10 5 2 1 –1 –2 –5 –10 –20 –50 Collector to Base Voltage VCB (V) 2SA2081 Package Dimensions As of July, 2001 0.1 0.3 +– 0.05 0.2 0.65 0.65 1.3 ± 0.2 0.9 ± 0.1 0.1 0.3 +– 0.05 + 0.1 0.16 – 0.06 0 – 0.1 0.425 1.25 ± 0.1 0.1 0.3 +– 0.05 2.1 ± 0.3 2.0 ± 0.2 0.425 Unit: mm Hitachi Code JEDEC JEITA Mass (reference value) CMPAK — Conforms 0.006 g Rev.0, Feb. 2002, page 5 of 6 2SA2081 Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109 URL http://www.hitachisemiconductor.com/ For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00 Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://semiconductor.hitachi.com.sg Hitachi Europe GmbH Electronic Components Group Dornacher Straße 3 D-85622 Feldkirchen Postfach 201, D-85619 Feldkirchen Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://semiconductor.hitachi.com.hk Copyright © Hitachi, Ltd., 2002. All rights reserved. Printed in Japan. Colophon 5.0 Rev.0, Feb. 2002, page 6 of 6