ETC PP1101SB

05171
PP1101SB
&
PP1101SC
. . . engineered solutions for the transient environment™
UNIDIRECTIONAL THYRISTOR SURGE SUPPRESSOR
APPLICATIONS
✔ SLIC Line Card
✔ DBX Branch Exchange Switches
✔ FCC Part 68 Customer Premise Equipment
✔ Line Interface Modem
✔ ISDN Architecture Interface
IEC COMPATIBILITY (EN61000-4)
DO-214AA
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 8/20µs - 95A, L4(Line-Gnd), 48A, L4(Line-Line) & 83A, L2(Power)
DEVICE SYMBOL
(UNIDIRECTIONAL)
FEATURES
✔ Complies with: FCC Part 68, UL 1459, Bellcore 1089, ITU-K.20 & K.21
✔ Peak Off-State Voltage: 80 Volts
✔ Surge Current Capability(See Table 1)
✔ ESD Protection > 40 kilovolts
MECHANICAL CHARACTERISTICS
✔ Molded Plastic DO-214AA Package
✔ Weight 2.5 grams (Approximate)
✔ Flammability Rating UL 94V-0
✔ Device Marking: Logo, Marking Code & Polarity Band or Notch on Top Surface
TABLE 1 - SURGE RATINGS
SERIES
IPP
2 X 10µs
AMPS
SB
SC
300
500
IPP
IPP
IPP
10 X 160µs 10 X 560µs 10 X 1000µs
AMPS
AMPS
AMPS
150
200
100
200
80
100
ITSM
60 Hz
AMPS
32
60
di/dt
dv/dt
AMPS/µs
AMPS/µs
(See Note 1) (See Note 1)
500
500
2000
2000
Note 1: Critital Rate of Rise for On-State Current (di/dt) and Off-State Voltage (dv/dt).
05171.R1 5/02
1
www.protekdevices.com
PP1101SB
&
PP01101SC
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
SYMBOL
VALUE
UNITS
ITSM
60/32
Amps
Junction Temperature
Tj
-40 to 150
°C
Storage Temperature
T STG
-55 to 150
°C
Thermal Resistance(Junction) - SB Series
Rqjc
28
°C/Watt
Thermal Resistance(Junction) - SC Series
Rqjc
26
°C/Watt
Thermal Resistance(Ambient) - SB Series
Rqja
90
°C/Watt
Thermal Resistance(Ambient) - SC Series
Rqja
85
°C/Watt
PARAMETER
Surge Current - 50/60 Hz (SB/SC)
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
DEVICE
MARKING
CODE
PP1101SB
PP1101SC
MINIMUM
HOLDING
CURRENT
(See Fig. 4)
VDRM
VOLTS
@100V/µs
VS
VOLTS
di/dt = 1A/ms
IH
mA
95
95
130
130
150
150
JS
JT
SWITCHING
CURRENT
FIGURE 1
PULSE WAVE FORM
100
IPP - Peak Pulse Current - % of IPP
SWITCHING
VOLTAGE
REPETITIVE
PEAK
OFF-STATE
VOLTAGE
Peak Value IPP
MAXIMUM
ON-STATE
VOLTAGE
(See Fig. 3)
ON-STATE
CURRENT
TYPICAL
CAPACITANCE
IS
mA
@VDRM
IDRM
µA
@IT
VT
VOLTS
IT
AMPS
@50V, 1 MHz
C
pF
800
800
5
5
5
5
1.0
1.0
80
120
FIGURE 2
V-I CHARACTERISTIC CURVE
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 1,000µs
tf
MAXIMUM
OFF-STATE
CURRENT
(See Fig. 3)
IPP
ITSM
IT
IS
IH
td = t I /2
PP
VS
50
IDRM
VT
VDRM
e-t
0
0
1
2
3
t - Time - µs
05171.R1 5/02
2
www.protekdevices.com
PP1101SB
&
PP1101SC
FIGURE 4
TYPICAL PEAK OFF-STATE CURRENT VS JUNCTION TEMPERATURE
1
0.1
0.01
-40
1.15
0
40
80
tJ- Temperature - °C
FIGURE 5
TYPICAL ON-STATE CURRENT VS ON-STATE VOLTAGE
100
IT - On-State Current - A
IDRM - Peak Off-State Current - µA
10
10
1
0
120
FIGURE 6
TYPICAL NORMALIZED VS VS JUNCTION TEMPERATURE
2.5
1.1
1
2
3
4
VT - On-State Voltage - V
5
6
7
FIGURE 7
TYPICAL HOLDING CURRENT VS JUNCTION TEMPERATURE
2
IH/IH (tJ 25°C)
Normalized VS
1.05
1
0.95
1.5
1
0.9
0.5
0.85
0.8
-40
0
40
80
tJ- Temperature - °C
0
40
80
tJ- Temperature - °C
120
FIGURE 7
ON-STATE CURRENT VS SURGE CURRENT DURATION
100
Non-Repetitive On-State Current (ITSM) - Amps
0
-40
120
PPxxxxSC
PPxxxxSB
10
1
1
05171.R1 5/02
10
100
Surge Current Duration - Full Cycles
3
1,000
www.protekdevices.com
PP1101SB
&
PP01101SC
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
DO-214AA (SMB)
A
DIMENSIONS
B
DIM
A
B
C
D
E
F
G
H
C
H
G
D
E
MILLIMETERS
MIN
MAX
1.96
3.30
4.06
2.00
0.76
5.21
0.10
0.15
2.21
3.94
4.57
2.62
1.52
5.59
0.20
0.31
INCHES
MIN
MAX
0.077
0.130
0.160
0.079
0.030
0.205
0.004
0.006
0.087
0.155
0.180
0.103
0.060
0.220
0.008
0.012
NOTES:
1. Dimensions are exclusive of mold flash and metal
burrs.
F
06030 Rev 0 - 4/02
TAPE & REEL PACKAGING:
Surface mount product is taped and reeled in accordance with EIA-481, reel quantites and sizes are as follows:
7 Inch Reel - 3,000 pieces per reel; 13 Inch Reel - N/A
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
COPYRIGHT © ProTek Devices 2001
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
05171.R1 5/02
4
www.protekdevices.com