ETC GL826

Genesys Logic, Inc.
GL826
USB 2.0 Multi-Slot
Flash Card Reader Controller
(All-in-one with Dual SD/MMC bus Interface)
Datasheet
Revision 1.06
Apr. 10, 2008
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
Copyright:
Copyright © 2008 Genesys Logic Incorporated. All rights reserved. No part of the materials may be
reproduced in any form or by any means without prior written consent of Genesys Logic, Inc.
Disclaimer:
ALL MATERIALS ARE PROVIDED “AS IS” WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY
KIND. NO LICENSE OR RIGHT IS GRANTED UNDER ANY PATENT OR TRADEMARK OF
GENESYS LOGIC INC..
GENESYS LOGIC HEREBY DISCLAIMS ALL WARRANTIES AND
CONDITIONS IN REGARD TO MATERIALS, INCLUDING ALL WARRANTIES, IMPLIED OR EXPRESS,
OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NON-INFRINGEMENT
OF INTELLECTUAL PROPERTY, INCLUDING, WITHOUT LIMITATION, THE X-D PICTURE CARDTM
LICENSE. IN NO EVENT SHALL GENESYS LOGIC BE LIABLE FOR ANY DAMAGES INCLUDING,
WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF INFORMATION OR PROFITS.
PLEASE BE ADVISED THAT THE MATERIALS MAY CONTAIN ERRORS OR OMMISIONS.
GENESYS LOGIC MAY MAKE CHANGES TO THE MATERIALS OR TO THE PRODUCTS DESCRIBED
THEREIN AT ANY TIME WITHOUT NOTICE.
Trademarks:
is a registered trademark of Genesys Logic, Inc.
All trademarks are the properties of their respective owners.
Office:
Genesys Logic, Inc.
12F, No. 205, Sec. 3, Beishin Rd., Shindian City,
Taipei, Taiwan
Tel: (886-2) 8913-1888
Fax: (886-2) 6629-6168
http ://www.genesyslogic.com
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 2
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
Revision History
Revision
Date
0.90
10/05/2006
0.91
01/19/2007
1.00
1.01
1.02
Description
Initial version
Modify SD/MMC Card Description
Modify some pin type and pin name
03/12/2007
Add AC Characteristics of MS PRO
Add serial EEPROM interface, p31
04/23/2007 Add description about pin118,119, p10
Modify DC Characteristics: VOH, IOH, IOL, p13
Add feature description below, p7:
Support Dual SD and MS-PRO 4-bit for 5 LUNs.
Support MS PRO-HG 8-bit for 4 LUNs
Pass Windows Vista and XP
Modify Chapter 2:
06/07/2007
Chapter 2.1 LQFP 128 Without MS PRO-HG 8bit support
Chapter 2.2 LQFP 128 With MS PRO-HG 8bit support
Chapter 2.3 Comparison
Modify Chapter4.8
Modify Chapter4.10
1.03
08/02/2007 Add LQFP48 Pin Package Application
1.04
01/02/2008
1.05
02/04/2008 Add LQFP64 Pin Package Application, p.6, p.10, p.12~14, p.22
1.06
04/10/2008 Modify LQFP64 Feature, p.6, p.10, p.12~14
1. Modify Chapter1 feature description, p.6
2. Update Chapter4 electrical characteristics, p.16
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 3
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
TABLE OF CONTENTS
CHAPTER 1 FEATURES .............................................................................. 6
CHAPTER 2 PIN ASSIGNMENT ................................................................ 7
2.1 LQFP 128 WITH DUAL SD SUPPORT ........................................................ 7
2.1.1 PINOUT DIAGRAM ............................................................................... 7
2.2 LQFP 128 WITH MS PRO-HG 8BIT SUPPORT......................................... 8
2.2.1 PINOUT DIAGRAM ............................................................................... 8
2.2.2 COMPARISON OF 4 LUNS AND 5 LUNS APPLICATION ....................... 9
2.3 LQFP 64................................................................................................... 10
2.3.1 PINOUT DIAGRAM ............................................................................. 10
2.4 LQFP 48................................................................................................... 11
2.4.1 PINOUT DIAGRAM ............................................................................. 11
2.4.2 PIN DESCRIPTION .............................................................................. 12
CHAPTER 3 BLOCK DIAGRAM.............................................................. 16
CHAPTER 4 ELECTRICAL CHARACTERISTICS............................... 17
4.1 ABSOLUTE MAXIMUM RATINGS .............................................................. 17
4.2 OPERATING CONDITIONS......................................................................... 17
4.3 DC CHARACTERISTICS ............................................................................ 17
4.4 AC CHARACTERISTICS OF RESET TIMING.............................................. 18
CHAPTER 5 PACKAGE DIMENSION..................................................... 19
CHAPTER 6 ORDERING INFORMATION ............................................ 22
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 4
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
LIST OF FIGURES
FIGURE 2.1-
-LQFP 128 PINOUT DIAGRAM(WITH DUAL SD SUPPORT)............................ 7
FIGURE 2.2-
-LQFP 128 PINOUT DIAGRAM(WITH MSPRO-HG 8BIT SUPPORT)............. 8
FIGURE 2.3-
-LQFP 64 PINOUT DIAGRAM ....................................................................... 10
-LQFP 48 PINOUT DIAGRAM ....................................................................... 11
FIGURE 2.4-
FIGURE 3.1-
-FUNCTIONAL BLOCK DIAGRAM .................................................................. 16
FIGURE 4.1-
-TIMING DIAGRAM OF RESET WIDTH .......................................................... 18
-TIMING DIAGRAM OF POWER GOOD TO USB COMMAND RECEIVE READY18
FIGURE 4.2-
FIGURE 5.1-
-LQFP 128PIN PACKAGE .............................................................................. 19
FIGURE 5.2-
-LQFP 64PIN PACKAGE ................................................................................ 20
FIGURE 5.3-
-LQFP 48PIN PACKAGE ................................................................................ 21
LIST OF TABLES
TABLE 2.1-
-DIFFERENCE OF PIN NAME .................................................................. 9
TABLE 2.2-
-PIN DESCRIPTION .............................................................................. 12
TABLE 4.1-
-ABSOLUTE MAXIMUM RATINGS ...................................................... 17
TABLE 4.2-
-OPERATING CONDITIONS ................................................................. 17
TABLE 4.3-
-DC CHARACTERISTICS ..................................................................... 17
TABLE 4.4-
-RESET TIMING ................................................................................... 18
TABLE 6.1-
-ORDERING INFORMATION ................................................................ 22
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 5
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
CHAPTER 1 FEATURES
USB specification compliance
- Compliant with Universal Serial Bus specification rev. 2.0.
- Compliant with USB Mass Storage Class Bulk only Transport Specification rev. 1.0.
- Supports one USB device address and up to 5 endpoints, including one control, one interrupt and 2 bulk
IN / OUT endpoint pairs.
Integrated USB building blocks
- USB2.0 transceiver macro (UTM), Serial Interface Engine (SIE), embedded Power-On Reset (POR)
and Low-Voltage Detector (LVD)
Embedded high speed 8051 micro-controller
- Operate @ 60 MHz clock, 12 clocks per instruction cycle
- Embedded 64K Byte mask ROM and internal 256 byte SRAM
High efficient DMA hardware engine improves transfer rate between USB and flash card interfaces
Support multiple flash card interfaces and the latest flash card specifications
TM
- CompactFlash /MicroDrive v4.0 with PIO mode 0-6 and UDMA 0-4 mode
TM
- Secure Digital v1.0 / v1.1 / v2.0
TM
- MultiMediaCard v3.X / v4.0 / v4.1 / v4.2 (1/4/8bit)
TM
TM
TM
- Memory Stick Rev.1.43, Memory Stick PRO Rev.1.02, Memory Stick PRO-HG Rev.1.01 with
8bit @60MHz operating speed
TM
- SmartMedia v1.00
TM
- xD-Picture v1.2C Type M/H (TID:AA-CG0451)
- CE-ATA v1.0b (external flash)
Support external serial EEPROM interface (8bit format) for the flexibility to load vender information and
system option
Support firmware upgrade to external flash via USB port ( ISP : In System Programming )
Embedded five power switches for power control of five cards interface
- Programmable over-current detected period; current default setting is 1ms
- Internal pull-up/pull-down resistance I/O pad controlled by firmware
On-chip 5V to 3.3V and 3.3V to 1.8V regulator
On board 12 MHz Crystal driver circuit
Operating system supported: Windows Vista32&64/XP/2000/Me/98/98SE, Mac OS 9.X/10.X, Linux
Kernel 2.4.X/2.6.X
- Pass Windows Vista32&64 (submission ID:1231473)
- Pass Windows XP (submission ID: 1231870)
128-pin LQFP: applies 5 LUNs card reader application (CF, SM/xD, SD/MMC 8bit, MS/MSPRO,
microSD/ MMCmicro 4bit.)
- Dual SD/MMC interfaces; one is SD/MMC 8bit, the other is microSD/ MMCmicro 4bit
- Support SD/MMC-to-SD/MMC read/write operations
128-pin LQFP: applies 4 LUNs card reader application with MSPRO-HG support (CF, SM/xD, SD/MMC
8bit, MS/MSPRO-HG 8bit)
64-pin LQFP: applies 3 LUNs card reader application but requiring external EEPROM setting
(SDHC/MMC v4.2 8bit, microSD/MMCmicro 4bit, and MS/MS PRO 4bit)
48-pin LQFP: applies 2 LUNs card reader application (SDHC/MMC v4.2 8bit and MS PRO-HG 8bit)
Available in 128-pin LQFP package
Available in 64-pin LQFP package
Available in 48-pin LQFP package
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 6
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
CHAPTER 2 PIN ASSIGNMENT
2.1 LQFP 128 With Dual SD Support
2.1.1 Pinout Diagram
AVDD1
RREF
AGND1
DM
DP
AVDD3
AGND3
GPIO12
MOEZ
MA10
MCSZ
MD7
MD6
MD5
MD4
MD3
MD2
MD1
MD0
MA0
MA1
MA2
MA3
TSTMOD
CF_CDZ
mSD _D1
mSD _D0
mSD _CLK
mSD _CMD
mSD _D3
mSD _D2
mSD _CDZ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
GL826
LQFP-128
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
GND
SD_D2
SD_D3
SD_D4
SD_CMD
SD_D5
SD_CLK
SD_D6
SD_D7
SD_D0
SD_D1
SD_CDZ
SD_WP
XD_CDZ
SM_CDZ
SM_RBZ
SM_REZ
SM_CEZ
SM_CLE
CF_D10
CF_D9
CF_D2
CF_D8
CF_D1
CF_D0
CF_A0
CF_A1
CF_A2
CF_DMACK
CF_DMARQ
CF_IORDY
CF_RST
Figure 2.1-
-LQFP 128 Pinout Diagram(with Dual SD support)
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 7
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
2.2 LQFP 128 With MS PRO-HG 8bit support
2.2.1 Pinout Diagram
AVDD1
RREF
AGND1
DM
DP
AVDD3
AGND3
GPIO12
MOEZ
MA10
MCSZ
MD7
MD6
MD5
MD4
MD3
MD2
MD1
MD0
MA0
MA1
MA2
MA3
TSTMOD
CF_CDZ
GPIO1
GPIO0
GPIO4
GPIO5
GPIO3
GPIO2
GPIO6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
GL826
LQFP-128
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
GND
SD_D2
SD_D3
SD_D4
SD_CMD
SD_D5
SD_CLK
SD_D6
SD_D7
SD_D0
SD_D1
SD_CDZ
SD_WP
XD_CDZ
SM_CDZ
SM_RBZ
SM_REZ
SM_CEZ
SM_CLE
CF_D10
CF_D9
CF_D2
CF_D8
CF_D1
CF_D0
CF_A0
CF_A1
CF_A2
CF_DMACK
CF_DMARQ
CF_IORDY
CF_RST
-LQFP 128 Pinout Diagram(with MSPRO-HG 8bit support)
Figure 2.2
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 8
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
2.2.2 Comparison of 4 LUNs and 5 LUNs application
Table 2.1-
-Difference of pin name
With Dual SD support (5 LUNs)
With MS PRO-HG 8bit support (4 LUNs)
Pin #
Pin Name
Type
Pin Name
Type
26
mSD _D1
B
GPIO1
B
27
mSD_D0
B
GPIO0
B
28
mSD _CLK
O
GPIO4
B
29
mSD _CMD
B
GPIO5
B
30
mSD _D3
B
GPIO3
B
31
mSD _D2
B
GPIO2
B
32
mSD _CDZ
I
GPIO6
I
33
GPIO8
B
MS_D4
B
34
GPIO9
B
MS_D5
B
35
GPIO10
B
MS_D6
B
36
GPIO11
B
MS_D7
B
99
PMOSOZ_ SD
P
PMOSOZ_ MS
P
101
PMOSOB_MS
P
PMOSOB_ SD
P
102
PMOSOC_mSD
P
PMOSOC_SD
P
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 9
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
2.3 LQFP 64
2.3.1 Pinout Diagram
MA7
MA6
MS_CLK
MS_D3
MS_INS
MS_D2
MS_D0
MS_D1
MS_BS
GND
X2
X1
IREF
5V
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
PMOSC_mSD 49
EXTRSTZ
48 PMOSB_MS
AVDD1
1
RREF
2
AGND1
3
DM
4
DP
5
AVDD3
6
AGND3
7
AGND3
8
GND
9
GPIO12
10
MCSZ
11
mSD_D1
12
mSD_D0
13
47 PMOSZ_SD
46 DVDD
45 GND
44 GND
43 SD_D2
42 SD_D3
41 SD_D4
GL826
40 SD_CMD
39 SD_D5
38 SD_CLK
37 SD_D6
36 SD_D7
LQFP-64
35 SD_D0
mSD_CLK 14
34 SD_D1
mSD_CMD 15
33 SD_CDZ
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
mSD_CDZ
GPIO8
GPIO9
GPIO10
GPIO11
VDD33
GND
GND
NC
NC
GND
GND
VCC18
NC
SD_WP
16
mSD_D2
mSD_D3
-LQFP 64 Pinout Diagram
Figure 2.3-
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 10
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
2.4 LQFP 48
2.4.1 Pinout Diagram
MS_D3
MS_D2
MS_D0
MS_D1
MS_BS
GND
X2
X1
IREF
5V
PMOSOB_SD
PMOSOZ_MS
48
47
46
45
44
43
42
41
40
39
38
37
MS_INS
1
36 VDD33
MA6
2
35 GND
MS_CLK
3
34 SD_D2
EXTRSTZ
4
33 SD_D3
MA7
5
32 SD_D4
AVDD1
6
31 SD_CMD
RREF
7
AGND1
8
DM
9
28 SD_D7
DP
10
27 SD_D6
AVDD3
11
AGND3
12
GL826
30 SD_CLK
29 SD_D5
26 SD_D1
LQFP-48
13
14
15
16
17
18
19
20
21
22
23
24
GPIO12
MCSZ
GPIO4
GPIO5
MS_D4
MS_D5
MS_D7
MS_D6
VDD33
GND
SD_CDZ
SD_WP
25 SD_D0
-LQFP 48 Pinout Diagram
Figure 2.4-
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 11
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
2.4.2 Pin Description
Table 2.2-
-Pin Description
LQFP128
Pin Name
LQFP128
(With Dual (With MSP-HG LQFP64 LQFP48
Type
Description
SD)
8bits)
AVDD1
1
1
1
6
P
Analog power
RREF
2
2
2
7
A
USB Reference resistor
AGND1
3
3
3
8
P
Analog ground
DM
4
4
4
9
A
USB D-
DP
5
5
5
10
A
USB D+
AVDD3
6
6
6
11
P
Analog power
AGND3
7
7
7,8
12
P
Analog ground
VDD33
37, 98
37, 98
23
21,36
P
Digital power 3.3V
VCC18
-
-
30
-
P
Digital power 1.8V
P
Digital Ground
9,24,25,
GND
38, 96, 108
38, 96, 108
28,29,44, 22, 35, 43
45,54
TSTMOD
24
24
-
-
I, pd
Test mode
MCSZ
11
11
11
14
O
External flash chip select
MOEZ
9
9
-
-
O
External flash output enable
MWEZ
123
123
-
-
O
External flash write enable
-
-
O
External flash address pins
121,124,125
MA15~0
, 120, 128,
121,124,125,
10, 127,
120, 128, 10,
126,
127, 126,
119~116,
119~116, 23~20
23~20
MA6
118
118
62
2
O
Serial EEPROM clock
MA7
119
119
63
5
B
Serial EEPROM data
12~19
12~19
-
-
B
External flash data pins
MD7~0
GPIO3,2,1,0/mS 30, 31, 26,
D _D3~0
GPIO4/mSD
_CLK
GPIO5/mSD
_CMD
27
30, 31, 26, 27
16,17,12,
13
GPIO3~0/
-
B
mSD data pins (in 5 LUNs
Dual SD application )
GPIO4/
28
28
14
15
B
mSD clock (in 5 LUNs Dual
SD application )
GPIO5/
29
29
©2000-2008 Genesys Logic Inc. - All rights reserved.
15
16
B
mSD command (in 5 LUNs
Dual SD application )
Page 12
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
GPIO6/
GPIO6/mSD
_CDZ
mSD card detect (in 5 LUNs
32
32
18
-
B
Dual SD application )
0: Card insert
1: No card
GPIO8~11
33~36
19~22
-
B
General purpose IO
General purpose IO
GPIO12
8
8
10
13
B
CF_CDZ
25
25
-
-
I, pu
CF card detect
0: Card insert
1: No card
60, 58, 56,
54,
CF_D15~0
52, 77, 76,
60, 58, 56, 54,
74,
52, 77, 76, 74,
59, 57, 55,
59, 57, 55, 53,
53,
51, 75, 73, 72
-
-
B
CF data pins
51, 75, 73,
72
CF_CS0Z
61
61
-
-
O
CF chip select 0
CF_CS1Z
62
62
-
-
O
CF chip select 1
CF_IORZ
63
63
-
-
O
CF IO read
CF_IOWZ
64
64
-
-
O
CF IO write
CF_RST
65
65
-
-
O
CF reset
CF_IORDY
66
66
-
-
I, pd
CF IO ready
CF_DMARQ
67
67
-
-
I, pd
CF DMA request
CF_DMACK
68
68
-
-
O
CF DMA acknowledge
69~71
69~71
-
-
O
CF address
CF_A2~0
SM WP#
SM_WPDZ
39
39
-
-
I, pu
0: write protection
1: write enable
SM_D7~0
40~47
40~47
-
-
B
SM data pins
SM_WPZ
48
48
-
-
I, pd
SM write protect
SM_WEZ
49
49
-
-
O
SM write enable
SM_ALE
50
50
-
-
O
SM_ALE
SM_CLE
78
78
-
-
O
SM command latch enable
SM_CEZ
79
79
-
-
O
SM card enable
SM_REZ
80
80
-
-
O
SM read enable
SM_RBZ
81
81
-
-
I, pd
SM read/busy
SM card detect
SM_CDZ
82
82
-
-
I, pu
0: Card insert
1: No card
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 13
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
xD card detect
XD_CDZ
83
83
-
-
I, pu
0: Card insert
1: No card
SD write protect
SD_WP
84
84
32
24
I, pd
0: write enable
1: write protection
SD card detect
SD_CDZ
85
85
33
23
I, pu
0: Card insert
1: No card
88, 89, 91,
SD_D7~0
93
88, 89, 91, 93
94, 95, 86,
94, 95, 86, 87
87
36,37,39,
41,42,43,
34,35
28, 27,
29, 32,
33, 34,
B
SD data pins
26, 25
SD_CLK
90
90
38
30
O
SD clock
SD_CMD
92
92
40
31
B
SD command/response
MS_BS
109
109
55
44
O
MS/MSP bus state
MS insertion detect
MS_INS
113
113
59
1
I, pu
0: Card insert
1: No card
114, 112,
114, 112, 110,
60,58,56,
110, 111
111, 33~36
57
115
115
61
97, 104
97, 104
PMOSOZ_SD
99
PMOSOA_SM
MS_D3~0, 4~7
48, 47,
B
MS/MSP data signal
3
O
MS clock
50
39
P
-
47
-
P
SD power 250mA
100
100
-
-
P
SM/xD power 100mA
PMOSOB_MS
101
-
48
-
P
MS power 100mA
PMOSOC_mSD
102
-
49
-
P
mSD power 100mA
PMOSOD_CF
103
103
-
-
P
CF power 500mA
PMOSOZ_MS
-
99
-
37
P
MS PRO-HG power 250mA
PMOSOB_SD
-
101
-
38
P
PMOSOC_SD
-
102
-
-
P
105
105
51
40
A
MS_CLK
5V
IREF
45,
46,17~19
5V power input, max.
600mA
SD power 200mA
Regulator reference voltage
12MHz XTAL input. It can
X1
106
106
52
41
I
be connected to external
12MHz clock input
X2
107
107
53
42
B
EXTRSTZ
122
122
64
4
I, pu
©2000-2008 Genesys Logic Inc. - All rights reserved.
12MHz XTAL output
System reset, active low
Page 14
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
Notation:
Type
O
I
B
pu
pd
P
A
Output
Input
Bi-directional
internal pull-up when input
internal pull-down when input
Power / Ground
Analog
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 15
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
CHAPTER 3 Block Diagram
MHE
EPFIFO
EP0 FIFO
MHECTL
MCFIFO
SIE
EP3 FIFO
MS PRO
PHY
BFA/BFB
SM/xD
Control
Register
MCU
SD/MMC
CF
Test ROM
SRAM
LUT
3.3V to1.8V
Program
ROM
LUT
SRAM
5V to 3.3V
Figure 3.1-
-Functional Block Diagram
Notation:
1. Support Dual SD in 5 LUNs application (CF, SM/xD, SD/MMC 8bit, MS/MSPRO, microSD/ MMCmicro
4bit)
2. Support MS PRO-HG 8bit in 4 LUNs application (CF, SM/xD, SD/MMC 8bit, MS/MSPRO-HG)
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 16
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
CHAPTER 4 ELECTRICAL CHARACTERISTICS
4.1 Absolute Maximum Ratings
-Absolute Maximum Ratings
Table 4.1-
Parameter
Value
Storage Temperature
-65°C to +150 °C
Ambient Temperature
-40°C to +80 °C
DC Input Voltage to Any Pin
-0.5V to +5.8V
4.2 Operating Conditions
Table 4.2-
-Operating Conditions
Parameter
Value
Ta (Ambient Temperature Under Bias)
0°C to 70°C
Supply Voltage
+4.75V to +5.25V
Ground Voltage
0V
12 MHz ± 0.05%
FOSC (Oscillator or Crystal Frequency)
12 MHz ± 0.25% (for USB full-speed only)
4.3 DC Characteristics
Table 4.3-
-DC Characteristics
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
5.25
V
VCC
Supply Voltage
4.75
-
VIH
Input High Voltage
2.0
-
VIL
Input Low Voltage
-
0.4
V
-10
-
10
µA
II
Input Leakage current
VOH
Output High Voltage
3.0
-
-
V
VOL
Output Low Voltage
-
-
0.4
V
IOH
Output Current High
-
4
-
mA
IOL
Output Current Low
-
4
-
mA
CIN
Input Pin Capacitance
-
5
-
pF
-
-
450
µA
-
-
60
mA
ISUSP
Suspend current
ICC
Supply current
0 < VIN < VCC
V
1.5K external pull-up
included
Connect to USB with 8051
operating
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 17
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
4.4 AC Characteristics of Reset Timing
Trst
EXTRSTZ
-Timing Diagram of Reset width
Figure 4.1-
3V
●
Vcc
USB
command
2V
●
Extrst
500us
72ms
Figure 4.2-
-Timing Diagram of Power Good to USB command receive ready
Table 4.4-
-Reset Timing
Parameter
Description
Min.
Unit
2
us
Trst
Chip reset sense timing width
T1
External reset valid from power up to high
500
us
T2
Reset Deassertion to respond USB command ready
72
ms
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 18
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
CHAPTER 5 PACKAGE DIMENSION
Internal No.
Green Package
Code No.
Date Code
Lot Code
Figure 5.1-
-LQFP 128pin package
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 19
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
Internal
No.
Date Code
Green Package
Code No.
Lot Code
Figure 5.2-
-LQFP 64pin package
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 20
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
Figure 5.3-
-LQFP 48pin package
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 21
GL826 USB 2.0 Multi-Slot Flash Card Reader Controller
CHAPTER 6 ORDERING INFORMATION
Table 6.1-
-Ordering Information
Part Number
Package
Green
Version
Status
GL826-MXG
128-pin LQFP
Green Package
XX
Available
GL826-MSG
64-pin LQFP
Green Package
XX
Available
GL826-MNG
48-pin LQFP
Green Package
XX
Available
©2000-2008 Genesys Logic Inc. - All rights reserved.
Page 22