AD OP177BZ

a
Ultraprecision
Operational Amplifier
OP177
FEATURES
Ultralow Offset Voltage:
TA = +258C: 10 mV max
–558C ≤ TA ≤ +1258C: 20 mV max
Outstanding Offset Voltage Drift: 0.1 mV/8C max
Excellent Open-Loop Gain and Gain Linearity:
12 V/mV typ
CMRR: 130 dB min
PSRR: 120 dB min
Low Supply Current: 2.0 mA max
Fits Industry Standard Precision Op Amp Sockets
(OP07/OP77)
PIN CONNECTIONS
Epoxy Mini-DIP
OP177BRC/883
(P Suffix)
LCC (RC Suffix)
8-Pin Hermetic DIP
(Z-Suffix)
8-Pin SO
(S-Suffix)
NC = NO CONNECT
NC = NO CONNECT
GENERAL DESCRIPTION
The OP177 features the highest precision performance of any
op amp currently available. Offset voltage of the OP177 is only
10 µV max at room temperature and 20 µV max over the full
military temperature range of –55°C to +125°C. The ultralow
VOS of the OP177, combines with its exceptional offset voltage
drift (TCVOS) of 0.1 µV/°C max, to eliminate the need for
external VOS adjustment and increases system accuracy over
temperature.
The OP177’s open-loop gain of 12 V/µV is maintained over the
full ± 10 V output range. CMRR of 130 dB min, PSRR of
120 dB min, and maximum supply current of 2 mA are just a
few examples of the excellent performance of this operational
amplifier. The OP177’s combination of outstanding specifications
insure accurate performance in high closed-loop gain applications.
This low noise bipolar input op amp is also a cost effective
alternative to chopper-stabilized amplifiers. The OP177 provides
chopper-type performance without the usual problems of high
noise, low frequency chopper spikes, large physical size, limited
common-mode input voltage range, and bulky external storage
capacitors.
The OP177 is offered in both the –55°C to +125°C military,
and the –40°C to +85°C extended industrial temperature
ranges. This product is available in 8-pin ceramic and epoxy
DIPs, as well as the space saving 8-pin Small-Outline (SO) and
the Leadless Chip Carrier (LCC) packages.
Figure 1. Simplified Schematic
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
© Analog Devices, Inc., 1995
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703
OP177–SPECIFICATIONS
ELECTRICAL CHARACTERISTICS (@ V = 615 V, T = +258C, unless otherwise noted)
S
Parameter
Symbol
Input Offset Voltage
Long-Term Input Offset Voltage Stability
Input Offset Current
Input Bias Current
Input Noise Voltage
Input Noise Current
Input Resistance Differential-Mode
Input Resistance Common-Mode
Input Voltage Range
Common-Mode Rejection Ratio
Power Supply Rejection Ratio
Large Signal Voltage Gain
Output Voltage Swing
VOS
∆VOS/Time
IOS
IB
en
in
RIN
RINCM
IVR
CMRR
PSRR
AVO
VO
Slew Rate
Closed-Loop Bandwidth
Open-Loop Output Resistance
Power Consumption
SR
BW
RO
PD
Supply Current
Offset Adjustment Range
ISY
A
Conditions
Min
OP177A
Typ
Max
4
0.2
0.3
(Note 1)
–0.2
fo = 1 Hz to 100 Hz2
fo = 1 Hz to 100 Hz2
(Note 3)
26
(Note 4)
VCM = ± 13 V
VS = ± 3 V to ± 18 V
RL ≥ 2 kΩ, VO = ± 10 V5
RL ≥ 10 kΩ
RL ≥ 2 kΩ
RL ≥ 1 kΩ
RL ≥ 2 kΩ2
AVCL = +12
± 13
130
120
5000
± 13.5
± 12.5
± 12.0
0.1
0.4
VS = ± 15 V, No Load
VS = ± 3 V, No Load
VS = ± 15 V, No Load
Rp = 20 kΩ
118
3
45
200
± 14
140
125
12000
± 14.0
± 13.0
± 12.5
0.3
0.6
60
50
3.5
1.6
±3
Min
OP177B
Typ
10
1.0
1.5
150
8
60
4.5
2.0
10
0.2
0.3
–0.2
Max
Units
25
µV
µV/Mo
nA
nA
nV rms
pA rms
MΩ
GΩ
V
dB
dB
V/mV
V
V
V
V/µs
MHz
Ω
mW
mW
mA
1.5
2.0
150
8
118
3
26
45
200
± 13
± 14
130
140
115
125
5000 12000
± 13.5 ± 14.0
± 12.5 ± 13.0
± 12.0 ± 12.5
0.1
0.3
0.4
0.6
60
50
60
3.5
4.5
1.6
2.0
±3
mV
NOTES
1
Long-Term Input Offset Voltage Stability refers to the averaged trend line of V OS vs. Time over extended periods after the first 30 days of operation. Excluding the
initial hour of operation, changes in V OS during the first 30 operating days are typically less than 2.0 µV.
2
Sample tested.
3
Guaranteed by design.
4
Guaranteed by CMRR test condition.
5
To insure high open-loop gain throughout the ± 10 V output range, A VO is tested at –10 V ≤ VO ≤ 0 V, 0 V ≤ VO ≤ +10 V, and –10 V ≤ VO ≤ +10 V.
Specifications subject to change without notice.
ELECTRICAL CHARACTERISTICS (@ V
Parameter
Symbol
Input Offset Voltage
Average Input Offset Voltage Drift
Input Offset Current
Average Input Offset Current Drift
Input Bias Current
Average Input Bias Current Drift
Input Voltage Range
Common-Mode Rejection Ratio
Power Supply Rejection Ratio
Large-Signal Voltage Gain
Output Voltage Swing
Power Consumption
Supply Current
VOS
TCVOS
IOS
TCIOS
IB
TCIB
IVR
CMRR
PSRR
AVO
VO
PD
ISY
S
= 615 V, –55°C ≤ TA ≤ +1258C, unless otherwise noted)
Conditions
Min
(Note 1)
(Note 2)
–0.2
(Note 2)
(Note 3)
VCM = ± 13 V
VS = ± 3 V to ± 18 V
RL ≥ 2 kΩ, VO = ± 10 V4
RL ≥ 2 kΩ
VS = ± 15 V, No Load
VS = ± 15 V, No Load
± 13
120
120
2000
± 12
OP177A
Typ
Max
10
0.03
0.5
1.5
2.4
8
± 13.5
140
125
6000
± 13.0
60
2.0
20
0.1
1.5
25
4
25
75
2.5
Min
–0.2
± 13
120
110
2000
± 12
OP177B
Typ
25
0.1
0.5
1.5
2.4
8
± 13.5
140
120
6000
± 13.0
60
2.0
Max
Units
55
0.3
2.0
25
4
25
µV
µV/°C
nA
pA/°C
nA
pA/°C
V
dB
dB
V/mV
V
mW
mA
75
2.5
NOTES
1
TCVOS is 100% tested.
2
Guaranteed by endpoint limits.
3
Guaranteed by CMRR test condition.
4
To insure high open-loop gain throughout the ± 10 V output range, A VO is tested at –10 V ≤ VO ≤ 0 V, 0 V ≤ VO ≤ +10 V, and –10 V ≤ VO ≤ +10 V.
Specifications subject to change without notice.
–2–
REV. B
ELECTRICAL CHARACTERISTICS
Input Offset Voltage
Long-Term Input Offset
Voltage Stability
Input Offset Current
Input Bias Current
Input Noise Voltage
Input Noise Current
Input Resistance
Differential-Mode
Input Resistance
Common-Mode
Input Voltage Range
Common-Mode
Rejection Ratio
Power Supply
Rejection Ratio
Large Signal
Voltage Gain
Output Voltage
Swing
VOS
4
10
10
25
∆VOS/Time (Note 1)
IOS
IB
fo = 1 Hz to 100 Hz2
en
in
fo = 1 Hz to 100 Hz2
–0.2
0.2
0.3
1.0
118
3
1.0
1.5
150
8
–0.2
0.3
0.3
1.2
118
3
1.5
2.0
150
8
RIN
(Note 3)
26
45
26
RINCM
IVR
(Note 4)
± 13
200
± 14
CMRR
VCM = ± 13 V
130
PSRR
VS = ±3 V to ± 18 V
RL ≥ 2 kΩ,
VO = ± 10 V5
Supply Current
Offset Adjustment
Range
Units
20
60
µV
–0.2
0.4
0.3
1.2
118
3
2.8
2.8
150
8
µV/Mo
nA
nA
nV rms
pA rms
45
18.5
45
MΩ
± 13
200
± 14
± 13
200
± 14
GΩ
V
140
130
140
115
140
dB
120
125
115
125
110
120
dB
5000
12000
5000
12000
2000
6000
V/mV
SR
RL ≥ 10 kΩ
RL ≥ 2 kΩ
RL ≥ 1 kΩ
RL ≥ 2 kΩ2
± 13.5
± 12.5
± 12.0
0.1
± 14.0
± 13.0
± 12.5
0.3
± 13.5
± 12.5
± 12.0
0.1
± 14.0
± 13.0
± 12.5
0.3
± 13.5
± 12.5
± 12.0
0.1
± 14.0
± 13.0
± 12.5
0.3
V
V
V
V/µs
BW
AVCL = +12
0.4
0.6
0.4
0.6
0.4
0.6
MHz
RO
PD
ISY
VS = ± 15 V, No Load
VS = ±3 V, No Load
VS = ±15 V, No Load
60
50
3.5
1.6
RP = 20 kΩ
±3
60
4.5
2.0
Min
60
50
3.5
1.6
±3
Max
60
4.5
2.0
Min
OP177G
Typ
Max
VO
Min
OP177F
Typ
Symbol
AVO
Conditions
OP177E
Typ
Max
Parameter
Slew Rate
Closed-Loop
Bandwidth
Open-Loop Output
Resistance
Power Consumption
OP177
(@ VS = 615 V, TA = +258C, unless otherwise noted)
60
50
3.5
1.6
±3
60
4.5
2.0
Ω
mW
mW
mA
mV
NOTES
1
Long-Term Input Offset Voltage Stability refers to the averaged trend line of V OS vs. time over extended periods after the first 30 days of operation. Excluding the initial hour of operation, changes in V OS during the first 30 operating days are typically less than 2.0 µV.
2
Sample tested.
3
Guaranteed by design.
4
Guaranteed by CMRR test condition.
5
To insure high open-loop gain throughout the ± 10 V output range, A VO is tested at –10 V ≤ VO ≤ 0 V, 0 V ≤ VO ≤ +10 V, and –10 V ≤ VO ≤ +10 V.
Specifications subject to change without notice.
REV. B
–3–
OP177–SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
Parameter
Symbol
Input Offset Voltage
Average Input Offset
Voltage Drift
Input Offset Current
Average Input Offset
Current Drift
Input Bias Current
Average Input Bias
Current Drift
Input Voltage Range
Common-Mode
Rejection Ratio
Power Supply Rejection
Ratio
Large-Signal
Voltage Gain
Output Voltage Swing
Power Consumption
Supply Current
VOS
(@ VS = 615 V, –40°C ≤ TA ≤ +858C, unless otherwise noted)
Conditions
Min
OP177E
Typ
Max
Min
OP177F
Typ
Max
Min
OP177G
Typ
Max
Units
10
20
15
40
20
100
µV
0.03
0.5
0.1
1.5
0.1
0.5
0.3
2.2
0.7
0.5
1.2
4.5
µV/°C
nA
–0.2
1.5
2.4
25
4
–0.2
1.5
2.4
40
4
1.5
2.4
85
± 6.0
pA/°C
nA
25
± 13
8
± 13.5
40
± 13.0
15
± 13.5
60
pA/°C
V
TCVOS
IOS
(Note 1)
TCIOS
IB
(Note 2)
TCIB
IVR
(Note 2)
(Note 3)
± 13
8
± 13.5
CMRR
VCM = ± 13 V
120
140
120
140
110
140
dB
PSRR
VS = ± 3 V to ± 18 V
120
125
110
120
106
115
dB
AVO
VO
PD
ISY
RL ≥ 2 kΩ, VO = ± 10 V4
RL ≥ 2 kΩ
VS = ± 15 V, No Load
VS = ± 15 V, No Load
2000
± 12
6000
± 13.0
60
2.0
2000
± 12
6000
± 13.0
60
2.0
1000
± 12.0
4000
± 13.0
60
2.0
V/mV
V
mW
75
2.5
75
2.5
75
2.5
mA
NOTES
1
OP177E: TCVOS is 100% tested.
2
Guaranteed by endpoint limits.
3
Guaranteed by CMRR test condition.
4
To insure high open-loop gain throughout the ± 10 V output range, A VO is tested at –10 V ≤ VO ≤ 0 V, 0 V ≤ VO ≤ +10 V, and –10 V ≤ VO ≤ +10 V.
Specifications subject to change without notice.
Figure 2. Typical Offset Voltage Test Circuit
Figure 3. Optional Offset Nulling Circuit
–4–
REV. B
OP177
Figure 4. Burn-In Circuit
ABSOLUTE MAXIMUM RATINGS
ORDERING GUIDE
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 22 V
Internal Power Dissipation1 . . . . . . . . . . . . . . . . . . . 500 mW
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . ± 30 V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 22 V
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range
Z and RC Packages . . . . . . . . . . . . . . . . . –65°C to +150°C
S, P Package . . . . . . . . . . . . . . . . . . . . . . –65°C to +125°C
Operating Temperature Range
OP177A, OP177B . . . . . . . . . . . . . . . . . –55°C to +125°C
OP177E, OP177F, OP177G . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . +300°C
DICE Junction Temperature (TJ) . . . . . . . –65°C to +150°C
Package Type
uJA2
uJC
Units
8-Pin Hermetic DIP (Z)
8-Pin Plastic DIP (P)
20-Contact LCC (RC)
8-Pin SO (S)
148
103
98
158
16
43
38
43
°C/W
°C/W
°C/W
°C/W
NOTES
1
For supply voltages less than ± 22 V, the absolute maximum input voltage is equal
to the supply voltage.
2
θJA is specified for worst case mounting conditions, i.e., θJA is specified for
device in socket for cerdip, P-DIP, and LCC packages; θJA is specified for
device soldered to printed circuit board for SO package.
REV. B
–5–
Model
Temperature
Range
Package
Description
Package
Option
OP177AZ
OP177BZ
OP177EZ
OP177FZ
OP177GZ
OP177FP
OP177GP
OP177BRC/883
OP177FS
OP177GS
–55°C to +125°C
–55°C to +125°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
–40°C to +85°C
–40°C to +85°C
8-Pin Cerdip
8-Pin Cerdip
8-Pin Cerdip
8-Pin Cerdip
8-Pin Cerdip
8-Pin Plastic DIP
8-Pin Plastic DIP
20-Pin LCC
8-Pin SO
8-Pin SO
Q-8
Q-8
Q-8
Q-8
Q-8
N-8
N-8
E-20A
SO-8
SO-8
OP177–Typical Performance Characteristics
Figure 5. Gain Linearity (Input
Voltage vs. Output Voltage)
Figure 6. Power Consumption vs.
Power Supply
Figure 7. Warm-Up VOS Drift
(Normalized) Z Package
Figure 8. Offset Voltage Change
Due to Thermal Shock
Figure 9. Open-Loop Gain
vs. Temperature
Figure 10. Open-Loop Gain vs.
Power Supply Voltage
Figure 11. Input Bias Current
vs. Temperature
Figure 12. Input Offset Current
vs. Temperature
Figure 13. Closed-Loop Response
for Various Gain Configurations
OP177
Figure 14. Open-Loop
Frequency Response
Figure 17. Total Input Noise
Voltage vs. Frequency
Figure 15. CMRR vs. Frequency
Figure 18. Input Wideband Noise
vs. Bandwidth (0.1 Hz to
Frequency Indicated)
Figure 19. Maximum Output Swing
vs. Frequency
Figure 21. Output Short Circuit
Current vs. Time
Figure 20. Maximum Output Voltage
vs. Load Resistance
REV. B
Figure 16. PSRR vs. Frequency
–7–
OP177
APPLICATIONS INFORMATION
Gain Linearity
THERMOCOUPLE AMPLIFIER WITH COLD-JUNCTION
COMPENSATION
The actual open-loop gain of most monolithic op amps varies at
different output voltages. This nonlinearity causes errors in high
closed-loop gain circuits.
An example of a precision circuit is a thermocouple amplifier
that must amplify very low level signals accurately without
introducing linearity and offset errors to the circuit. In this
circuit, an S-type thermocouple, which has a Seebeck coefficient
of 10.3 µV/°C, produces 10.3 mV of output voltage at a
temperature of 1,000°C. The amplifier gain is set at 973.16.
Thus, it will produce an output voltage of 10.024 V. Extended
temperature ranges to beyond 1,500°C can be accomplished by
reducing the amplifier gain. The circuit uses a low-cost diode to
sense the temperature at the terminating junctions and in turn
compensates for any ambient temperature change. The OP177,
with its high open-loop gain, plus low offset voltage and drift
combines to yield a very precision temperature sensing circuit. Circuit values for other thermocouple types are shown in Table I.
It is important to know that the manufacturer’s AVO specification is only a part of the solution, since all automated testers
use endpoint testing and, therefore, only show the average gain.
For example, Figure 22 shows a typical precision op amp with a
respectable open-loop gain of 650 V/mV. However, the gain is
not constant through the output voltage range, causing
nonlinear errors. An ideal op amp would show a horizontal
scope trace.
Table I.
ThermoSeebeck
couple Type Coefficient
R1
R2
R7
K
J
S
110 Ω
100 Ω
100 Ω
5.76 kΩ
4.02 kΩ
20.5 kΩ
102 kΩ 269 kΩ
80.6 kΩ 200 kΩ
392 kΩ 1.07 MΩ
39.2 µV/°C
50.2 µV/°C
10.3 µV/°C
R9
Figure 22. Typical Precision Op Amp
Figure 23. OP177’s Output Gain Linearity Trace
Figure 25. Thermocouple Amplifier with Cold Junction
Compensation
PRECISION HIGH GAIN DIFFERENTIAL AMPLIFIER
The high gain, gain linearity, CMRR, and low TCVOS of the
OP177 make it possible to obtain performance not previously
available in single stage, very high-gain amplifier applications.
See Figure 26.
Figure 24. Open-Loop Gain Linearity Test Circuit
Figure 23 shows the OP177’s output gain linearity trace with its
truly impressive average AVO of 12000 V/mV. The output trace
is virtually horizontal at all points, assuring extremely high gain
accuracy. PMI also performs additional testing to insure
consistent high open-loop gain at various output voltages.
Figure 24 is a simple open-loop gain test circuit for your own
evaluation.
For best CMR,
R1
R3
must equal
. In this example, with a
R2
R4
10 mV differential signal, the maximum errors are as listed in
Table II.
OP177
ISOLATING LARGE CAPACITIVE LOADS
The circuit in Figure 27 reduces maximum slew-rate but allows
driving capacitive loads of any size without instability. Because
the 100 Ω resistor is inside the feedback loop, its effect on
output impedance is reduced to insignificance by the high openloop gain of the OP177.
Figure 26. Precision High Gain Differential Amplifier
Table II. High Gain Differential Amp Performance
Type
Amount
Common-Mode Voltage
Gain Linearity, Worst Case
TCVOS
TCIOS
0.1%/V
0.02%
0.0003%/°C
0.008%/°C
Figure 27. Isolating Capacitive Loads
Figure 28. Bilateral Current Source
Figure 29. Precision Absolute Value Amplifier
OP177
BILATERAL CURRENT SOURCE
PRECISION ABSOLUTE VALUE AMPLIFIER
The current sources shown in Figure 28 will supply both
positive and negative current into a grounded load.
The high gain and low TCVOS assure accurate operation with
inputs from microvolts to volts. In this circuit, the signal always
appears as a common-mode signal to the op amps. The
OP177E CMRR of 140 dB assures errors of less than 1 ppm.
See Figure 29.
 R4 
R5 
+1
 R2 
Note that ZO = R5+ R4 R3
–
R1
R2
and that for ZO to be infinite,
R5+ R4
R3
must =
R2
R1
Figure 30. Precision Positive Peak Detector
PRECISION POSITIVE PEAK DETECTOR
In Figure 30, the CH must be of polystyrene, Teflon*, or
polyethylene to minimize dielectric absorption and leakage. The
droop rate is determined by the size of CH and the bias current
of the OP41.
PRECISION THRESHOLD DETECTOR/AMPLIFIER
In Figure 32, when VIN < VTH, amplifier output swings negative, reverse biasing diode D1. VOUT = VTH if RL = ∞. When
VIN ≥ VTH, the loop closes,
 R 
VOUT =VTH + (VIN –VTH ) 1+ F 
 RS 
CC is selected to smooth the response of the loop.
Figure 31. Precision Threshold Detector/Amplifier
*Teflon is a registered trademark of the Dupont Company.
–10–
REV. B
OP177
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
8-Pin Cerdip
(Q-8)
0.005 (0.13) MIN
8-Pin SO
(SO-08)
0.055 (1.4) MAX
5
8
8
0.1574 (4.00)
0.1497 (3.80)
5
PIN 1
0.310 (7.87)
0.220 (5.59)
PIN 1
1
0.320 (8.13)
0.290 (7.37)
0.405 (10.29) MAX
0.1968 (5.00)
0.1890 (4.80)
0.060 (1.52)
0.015 (0.38)
0.200
(5.08)
MAX
0.150
(3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.023 (0.58) 0.100 0.070 (1.78)
0.014 (0.36) (2.54) 0.030 (0.76)
BSC
8
0.0098 (0.25)
0.0040 (0.10)
0.0500 0.0192 (0.49)
(1.27) 0.0138 (0.35)
BSC
0.015 (0.38)
0.008 (0.20)
0.358 (9.09)
0.342 (8.69)
SQ
0.075
(1.91)
REF
0.100 (2.54)
0.064 (1.63)
0.095 (2.41)
0.075 (1.90)
0.325 (8.25)
0.300 (7.62)
0.430 (10.92)
0.348 (8.84)
0.060 (1.52)
0.015 (0.38)
TOP
VIEW
0.195 (4.95)
0.115 (2.93)
0.358
(9.09)
MAX
SQ
0.011 (0.28)
0.007 (0.18)
R TYP
0.075 (1.91)
REF
0.200 (5.08)
BSC
0.100 (2.54) BSC
3
19
18 20
4
0.028 (0.71)
0.022 (0.56)
1
BOTTOM
VIEW
14
13
0.015 (0.38)
MIN
0.050 (1.27)
BSC
8
9
45° TYP
0.130
(3.30)
MIN
0.160 (4.06)
0.115 (2.93)
0.022 (0.558)
0.014 (0.356)
0.0500 (1.27)
0.0160 (0.41)
20-Pin LCC
(E-20A)
4
0.210
(5.33)
MAX
8°
0°
SEATING
PLANE
0.280 (7.11)
0.240 (6.10)
1
0.0098 (0.25)
0.0075 (0.19)
15°
0°
5
PIN 1
0.0196 (0.50)
x 45°
0.0099 (0.25)
0.0688 (1.75)
0.0532 (1.35)
8-Pin Plastic DIP
(N-8)
REV. B
0.2440 (6.20)
0.2284 (5.80)
4
1
4
0.100
(2.54)
BSC
0.070 (1.77)
0.045 (1.15)
0.088 (2.24)
0.054 (1.37)
0.015 (0.381)
0.008 (0.204)
SEATING
PLANE
–11–
0.055 (1.40)
0.045 (1.14)
0.150 (3.81)
BSC
–12–
PRINTED IN U.S.A.
C2087–5–11/95